|
DataMuseum.dkPresents historical artifacts from the history of: Commodore CBM-900 |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about Commodore CBM-900 Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 42099 (0xa473)
Types: TextFile
Notes: UNIX file
Names: »OLD.termcap«, »termcap«
└─⟦eafc30061⟧ Bits:30001199 Commodore 900 hard disk image
└─⟦8281d0872⟧ UNIX Filesystem
└─ ⟦294235107⟧ »vol3.fd« UNIX Filesystem
└─ ⟦this⟧ »etc/termcap«
└─⟦eafc30061⟧ Bits:30001199 Commodore 900 hard disk image
└─⟦5ec4c54f2⟧ UNIX Filesystem
└─ ⟦this⟧ »etc/termcap«
└─⟦f27320a65⟧ Bits:30001972 Commodore 900 hard disk image with partial source code
└─⟦926b8033d⟧ UNIX Filesystem
└─ ⟦this⟧ »etc/OLD.termcap«
# Mail changes to csvax:mark, csvax.mark@berkeley, or ucbvax!mark or lose them!
sw|switch|intelligent switch:co#80:os:am:
su|dumb|un|unknown:co#80:os:am:
sp|plugboard:co#80:os:am:
se|ethernet|network:co#80:os:am:
sd|du|dialup:co#80:os:am:
sb|bussiplexer:co#80:os:am:
sa|arpanet|network:co#80:os:am:
# additions by SoftWords
q1|qume|102|Qume QVT-102\
:al=\EE:am:bs:cd=\EY:ce=\ET:cm=\E=%+ %+ :cl=^Z:co#80:dc=\EW:dl=\ER:\
:kb=^h:ku=^K:kd=^J:kl=^H:kr=^L:k0=^A@\r:k1=^AA\r:k2=^AB\r:k3=^AC\r:\
:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:\
:ho=^^:im=:ei=:ic=\EQ:li#24:nd=^L:pt:se=\EG0:so=\EG4:sg#1:up=^K:\
:us=\EG8:ue=\EG0:ug#1:\
:vb=\E}\200\200\200\200\200\200\200\200\200\200\200\200\200\200\E{:
# The Visual 200 beeps when you type a character in insert mode.
# This is a horribly obnoxious misfeature, and some of the entries
# below try to get around the problem by ignoring the feature or
# turning it off when inputting a character. They are said not to
# work well at 300 baud. (You could always cut the wire to the bell!)
V2|vi200|visual 200 with function keys:\
:al=\EL:am:bs:cd=\Ey:ce=4*\Ex:cl=\Ev:\
:cm=\EY%+ %+ :co#80:dc=4*\EO:dl=4*\EM:ho=\EH:\
:im=:ei=:ic=\Ei \b\Ej:\
:is=\E3\Eb\Ej\E\\\El\EG\Ed\Ek:\
:k0=\EP:k1=\EQ:k2=\ER:k3=\E :k4=\E!:k5=\E":k6=\E#:\
:k7=\E$:k8=\E%:k9=\E&:kl=\ED:kr=\EC:ku=\EA:kd=\EB:kh=\EH:\
:li#24:nd=\EC:pt:sr=\EI:up=\EA:vs=\Ed:ve=\Ec:
VR|vi200rvic|visual 200 reverse video using insert char:\
:ei=\Ej:im=\Ei:ic@:tc=vi200rv:
# The older Visuals didn't come with function keys. This entry uses
# ks and ke so that the keypad keys can be used as function keys.
# If your version of vi doesn't support function keys you may want
# to use V2.
Vf|vi200f|visual|visual 200 no function keys:\
:al=\EL:am:bs:cd=\Ey:ce=4*\Ex:cl=\Ev:\
:cm=\EY%+ %+ :co#80:dc=4*\EO:dl=4*\EM:ho=\EH:\
:im=:ei=:ic=\Ei \b\Ej:\
:is=\E3\Eb\Ej\E\\\El\EG\Ed\Ek:ks=\E=:ke=\E>:\
:k0=\E?p:k1=\E?q:k2=\E?r:k3=\E?s:k4=\E?t:k5=\E?u:k6=\E?v:\
:k7=\E?w:k8=\E?x:k9=\E?y:kl=\ED:kr=\EC:ku=\EA:kd=\EB:kh=\EH:\
:li#24:nd=\EC:pt:sr=\EI:up=\EA:vs=\Ed:ve=\Ec:
Vr|vi200rv|visual 200 reverse video:\
:so=\E4:se=\E3:sr@:vs@:ve@:tc=vi200:
Vt|vi200ic|visual 200 using insert char:\
:ei=\Ej:im=\Ei:ic@:tc=vi200:
la|adm3a|3a|lsi adm3a:\
:am:bs:cm=\E=%+ %+ :cl=1^Z:co#80:ho=^^:li#24:ma=^K^P:nd=^L:up=^K:
# This discription is not complete but sufficient
# The Add's Viewpoint has underscore, blinking,reverse vidio
# half intensity,vidio suppress and a combination of all the above.
# These still need to be put in. Untested!
AV|adview|Add`s Viewpoint with function keys:\
:am:bs:cd=\Ek:ce=\EK:cl=\f
:cm=\EY%+ %+ :\
:co#80:ho=^A:\:k1=^B1:k2=^B2:k3=^B3:k4=^B!:\
:k5=^B":k6=^B#:kl=^U:kr=^F:ku=^Z:\
:kd=^J:kh=^A:li#24:nd=^F:up=^Z:
h2|2621|hp2621|hp2621a|hp2621p|2621|2621a|2621p|hp 2621:\
:is=\E&j@\r\E3\r:bt=\Ei:cm=\E&a%r%dc%dY:dc=2\EP:ip=2:\
:kh=\Ep\r:ku=\Et\r:kl=\Eu\r:kr=\Ev\r:kd=\Ew\r:\
:kn#8:k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
:k8=\Ew\r:ks=\E&jB:ke=\E&j@:ta=2^I:tc=hp:
# Note: no "ho" on HP's since that homes to top of memory, not screen.
# Due to severe braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# (f1-f8) with ks, and even then the poor user has to hold down shift!
# The default 2621 turns off the labels except when it has to to enable
# the function keys. If your installation prefers labels on all the time,
# or off all the time (at the "expense" of the function keys) move the
# 2621nl or 2621wl labels to the front using reorder.
# 2621k45: untested
h3|2621k45|hp2621k45|k45|hp 2621 with 45 keyboard:\
:kb=^H:ku=\EA:kd=\EB:kl=\ED:kr=\EC:kh=\Eh:ks=\E&s1A:ke=\E&s0A:tc=2621:
h4|hp|hp2645|2645|hp 264x series:\
:if=/usr/lib/tabset/stdcrt:\
:al=\EL:am:bs:cd=\EJ:ce=\EK:ch=\E&a%dC:cl=\EH\EJ:cm=6\E&a%r%dc%dY:\
:co#80:cv=\E&a%dY:da:db:dc=\EP:dl=\EM:ei=\ER:im=\EQ:\
:kb=^H:ku=\EA:kd=\EB:kl=\ED:kr=\EC:kh=\Eh:ks=\E&s1A:ke=\E&s0A:\
:li#24:mi:ml=\El:mu=\Em:nd=\EC:pt:se=\E&d@:so=\E&dJ:\
:us=\E&dD:ue=\E&d@:up=\EA:xs:
h6|hp2626|hp2626a|hp2626p|2626|2626a|2626p|hp 2626:\
:is=\E&j@\r\E3\r:if=/usr/lib/tabset/stdcrt:\
:al=\EL:am:bs:bt=\Ei:cd=\EJ:ce=\EK:cl=\EH\EJ:\
:cm=\E&a%r%dc%dY:co#80:da:db:dc=2\EP:dl=\EM:ei=\ER:\
:im=\EQ:ip=2:li#24:mi:nd=\EC:pt:se=\E&d@:so=\E&dB:up=\EA:\
:kh=\Eh:ku=\EA:kl=\ED:kr=\EC:kd=\EB:\
:ma=j^Jk^P^K^Pl :sf=\ES:\
:ta=2^I:xs:
# cD a pain - only screw up at 9600 baud.
h8|hp2648|hp2648a|2648a|2648|HP 2648a graphics terminal:\
:cl=50\EH\EJ:cm=20\E&a%r%dc%dY:dc=7\EP:ip#5:is=130\Eg:tc=2645:
# 2640a doesn't have the Y cursor addressing feature, and C is memory relative
# instead of screen relative, as we need.
ha|2640|hp2640a|2640a|hp 2640a:cm@:ks@:ke@:tc=2645:
hb|2640b|hp2640b|2644a|hp2644a|hp 264x series:ks@:ke@:tc=2645:
# 2621 using all 48 lines of memory, only 24 visible at any time. Untested.
hb|big2621|48 line 2621:li#48:ho=\EH:cm=\E&a%r%dc%dR:tc=2621:
hn|2621nl|hp2621nl|2621|hp 2621 with no labels:ks@:ke@:kh@:ku@:kl@:kr@:kd@:tc=hp2621:
# Needed for our vax console, since lsi-11 expands ta=\Ev\r:kd=\Ew\r:\
:kn#8:k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:\
:k8=\Ew\r:ks=\E&jB:ke=\E&j@:ta=2^I:tc=hp:
cr|c100rv|c100rv4p|c100 rev video:\
:is=\EU\Ef\E7\E5\E8\El\ENH\Ek\E\200\Eo&\200\Eo\47\E:vs@:ve@:\
:vb=\EK\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ek:\
:tc=c100:
co|c100|concept|c104|c1004p|concept100|concept 100:\
:is=\EU\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E:\
:ti=\EU\Ev 8p\Ep\r:te=\Ev \200\200\200\200\200\200\Ep\r\n:\
:al=3*\E^R:am:bs:cd=16*\E^C:ce=16\E^S:cl=2*^L:cm=\Ea%+ %+ :co#80:\
:dc=16\E^A:dl=3*\E^B:ei=\E\200:eo:im=\E^P:in:ip=16*:li#24:mi:nd=\E=:\
:pt:kb=^h:ta=8\t:ul:up=\E;:db:us=\EG:ue=\Eg:xn:vs=\EW:ve=\Ew:\
:vb=\Ek\200\200\200\200\200\200\200\200\200\200\200\200\200\200\EK:\
:us=\EG:ue=\Eg:ks=\EX:ke=\Ex:ku=\E;:kd=\E<:kl=\E>:kr=\E=:kh=\E?:\
:k1=\E5:k2=\E6:k3=\E7:.dN#9:dC#9:
mm|mime|mime1|mime2|mimei|mimeii|microterm mime1:\
:al=80^A:am:bs:cd=^_:ce=^^:cl=\035^C:cm=^T%+^X%> 0%+P:co#80:\
:dl=80^W:ta=2^I:li#24:nd=^X:pt:uc=^U:up=^z:ho=\035:do=^K:is=^S\E:\
:ma=^X ^K^J^Z^P:ku=^Z:kd=^K:kl=^H:kr=^X:sr=3^R:
kb|h19|heath|h19b|heathkit|heath-19|z19|zenith|heathkit h19:\
:al=1*\EL:am:bs:cd=\EJ:ce=\EK:cl=\EE:cm=\EY%+ %+ :co#80:dc=\EN:\
:dl=1*\EM:do=\EB:ei=\EO:ho=\EH:im=\E@:li#24:mi:nd=\EC:as=\EF:ae=\EG:\
:ms:pt:sr=\EI:se=\Eq:so=\Ep:up=\EA:vs=\Ex4:ve=\Ey4:\
:kb=^h:ku=\EA:kd=\EB:kl=\ED:kr=\EC:kh=\EH:kn#8:\
:k1=\ES:k2=\ET:k3=\EU:k4=\EV:k5=\EW:\
:l6=blue:l7=red:l8=white:k6=\EP:k7=\EQ:k8=\ER:
l3|adm3|3|lsi adm3:\
:am:bs:cl=^Z:li#24:ma=^K^P:co#80:
# Termcap source file %W% %G%
# Mark Horton, U.C. Berkeley
#
# This file describes capabilities of various terminals, as needed by
# software such as screen editors. It does not attempt to describe
# printing terminals very well, nor graphics terminals. Someday.
# See termcap(5) in the Unix Programmers Manual for documentation.
#
# The A manufacturer represents Diablo, DTC, Xerox, Qume, and other Daisy
# wheel terminals until such time as termcap distinguishes between them
# enough to justify separate codes.
# 1620 uses all 132 columns, 1640 sets left margin to 8 and uses snazzy
# binary tabset file. Both should work on both terminals.
A6|1620|450|diablo 1620:\
:if=/usr/lib/tabset/std:\
:kb=^H:bs:co#132:ff=^L:hc:hu=\EU:hd=\ED:os:pt:up=\E\n:
A7|1640|diablo 1640:\
:co#124:if=/usr/lib/tabset/diablo:tc=1620:
Ad|dtc300s|300|300s|gsi|dtc|dtc 300s:\
:if=/usr/lib/tabset/std:\
:kb=^h:bs:co#132:ff=^L:hc:hu=\EH:hd=\Eh:os:pt:up=^Z:
Ag|gsi:bs:co#132:hc:hd=\Eh:hu=\EH:os:pt:up=^Z:
Aj|aj830|aj832|aj|anderson jacobson:\
:bs:hc:hd=\E9:hu=\E8:os:pl:up=\E7:
Aq|qume5|qume|Qume Sprint 5:\
:if=/usr/lib/tabset/std:\
:kb=^h:bs:co#80:ff=^L:hc:hu=\EH:hd=\Eh:os:pt:up=^Z:
Ax|x1720|x1700|1700|x1750|xerox 1720:co#132:bs:ff=^L:hc:os:pt:if=/usr/lib/tabset/xerox1720
Ca|cdc456|cdc:\
:li#24:co#80:cl=^Y^X:nd=^L:up=^Z:bs:\
:cm=\E1%+ %+ :ho=^Y:al=\E\114:dl=\E\112:ce=^V:cd=^X:am:
Cc|cdc456tst:\
:li#24:co#80:cl=^y^x:bs:cm=\E1%+ %+ :am:
D0|dm1520|dm1521|1521|1520|datamedia 1520:\
:am:bs:cd=^K:ce=^]:cl=^L:cm=^^%r%+ %.:co#80:ho=^Y:\
:ku=^_:kd=^J:kl=^H:kr=^\:kh=^Y:\
:li#24:nd=^\:up=^_:xn:ma=^\ ^_^P^YH:pt:
D1|dm1521|1521|datamedia 1521:\
:am:bs:cd=^K:ce=^]:cl=^L:cm=^^%r%+ %.:co#80:ho=^Y:\
:ku=^_:kd=^J:kl=^H:kr=^\:kh=^Y:\
:li#24:nd=^\:up=^_:xn:ma=^\ ^_^P^YH:pt:
D2|dm2500|datamedia2500|2500|datamedia 2500:\
:al=15^P\n^X^]^X^]:bs:ce=^W:cl=^^^^\177:cm=^L%r%n%.%.:co#80:\
:dc=10*^P\b^X^]:dl=10*^P^Z^X^]:dm=^P:ed=^X^]:ei=10\377\377^X^]:ho=^B:\
:ic=10*^P^\^X^]:im=^P:li#24:nc:nd=^\:pc=\377:so@=^N:se=^X^]:up=^Z:
D3|dm3025|datamedia 3025a:is=\EQ\EU\EV:\
:al=130\EP\n\EQ:bs:cd=2\EJ:ce=\EK:cl=2\EM:cm=\EY%r%+ %+ :\
:co#80:dc=6\b:dl=130\EP\EA\EQ:dm=\EP:ed=\EQ:ei=\EQ:ho=\EH:\
:im=\EP:ip=6:li#24:nd=\EC:pt:so=\EOA:se=\EO@:up=\EA:
D4|3045|dm3045|datamedia 3045a:is=\EU\EV:\
:am:bs:cd=2\EJ:ce=\EK:cl=2\EM:cm=\EY%r%+ %+ :co#80:\
:dc=6\EB:dm=:ed=:ei=\EP:ho=\EH:ic=:im=\EP:ip=6:\
:k0=\Ey\r:k1=\Ep\r:k2=\Eq\r:k3=\Er\r:k4=\Es\r:\
:k5=\Et\r:k6=\Eu\r:k7=\Ev\r:k8=\Ew\r:k9=\Ex\r:\
:kh=\EH:ku=\EA:kr=\EC:li#24:nd=\EC:pc=\177:pt:eo:ul:up=\EA:xn:
D5|dt80|dmdt80|dm80|datamedia dt80/1:\
:is=\E<\E[2J\E[H\E[?1;3;5;6;9l\E[?7;8h:\
:am:bs:cd=\E[J:co#80:li#24:ce=\E[K:cl=\E[2J\E[H:\
:cm=%i\E[%d;%dH:ho=\E[H:nd=\E[C:\
:so=\E[7m:se=\E[m:\
:up=\E[A:us=\E[4m:ue=\E[m:\
:vb=\E[?5h\E[?5l:\
:vs=\E[1;2;3;4q\E[?4l:ve=\E[0q\E?4h:\
:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\
:sr=\EM:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:
D6|dt80132|dmdt80132|datamedia dt80/1 in 132 char mode:\
:bs:cd=20^[[0J:co#132:ce=20^[[0K:kd=^[[B:kl=^[[D:kr=^[[C:ku=^[[A:\
:li#24:cm=5^[[%i%d;%dH:cl=50^[[H^[[2J:nd=^[[C:up=5^[[A:
ED|delta|dd5000|delta data 5000:\
:am:bs:cl=^NR:cm=^O%D%+9%D%+9:co#80:li#27:ho=^NQ:nc:nd=^Y:\
:up=^Z:ce=^NU:dc=^NV:ma=^K^J^Z^P^Y :xr:
# Since nd is blank, when you want to erase something you
# are out of luck. You will have to do ^L's a lot to
# redraw the screen. h1000 is untested. It doesn't work in
# vi - this terminal is too dumb for even vi. (The code is
# there but it isn't debugged for this case.)
H1|h1000|hazeltine 1000:bs:ho=^K:cl=^L:nd= :co#80:li#12:
# Note: the h1552 appears to be the first Hazeltine terminal which
# is not braindamaged. It has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
H2|h1552|hazeltine 1552:\
:al=\EE:dl=\EO:f1=\EP:l1=blue:f2=\EQ:l2=red:f3=\ER:l3=green:tc=vt52:
H3|h1552rv|hazeltine 1552 reverse video:\
:so=\ES:se=\ET:tc=h1552:
H5|h1500|hazeltine 1500:\
:al=40~^Z:am:bs:cd=10~^X:ce=~^O:cl=~^\:cm=~^Q%r%.%.:co#80:\
:dl=40~^S:do=~^K:li#24:nd=^P:.se=~^_:.so=~^Y:up=~^L:
# h1510 assumed to be in sane escape mode. Else use h1500.
H6|h1510|hazeltine 1510:\
:al=\E^Z:am:bs:cd=\E^X:ce=\E^O:cl=\E^\:cm=\E^Q%r%.%.:co#80:\
:dl=\E^S:do=\E^K:li#24:nd=^P:.se=\E^_:.so=\E^Y:up=\E^L:
H8|h1520|hazeltine 1520:\
:al=~^Z:am:bs:cd=~^X:ce=~^O:cl=~\034:cm=~^Q%r%.%.\200:co#80:\
:dl=~^S:do=~^K:hz:li#24:nd=^P:se=~^Y:so=~\037:up=~^L:ho=~^R:
# Note: h2000 won't work well because of a clash between upper case and ~'s.
H7|h2000|hazeltine 2000:\
:al=6~^z:am:bs:cl=6~^\:cm=~^q%r%.%.:co#74:\
:dl=6~^s:ho=~^r:li#27:nc:pc=\177:
# One of these should go in the misc category, IBM and ISC can't
# both have I. I will wait to see who comes out with more terminals.
I8|8001|ISC8001:al=\EU:am:bc=^Z:cl=3*^L:cm=^C%r%.%.:co#80:\
:cd=\EQ:dm=\EQ:ed=\EF:\
:dc=\177:dl=\EV:ei=\EF:im=\EQ:li#40:nd=1^Y:ta=8\t:\
:up=^\:ho=1^H:pc=^@:
It|intext|ISC modified owl 1200:\
:al=5.5*\020:am:bc=\037:bs:cd=5.5*\026J:cl=132\014:\
:cm=\017%+ %+ :co#80:dc=5.5*\022:dl=5.5*\021:\
:ei=\026\074:im=\026\073:ip=5.5*:in:li#24:nd=\036:up=\034:\
:ma=^K^P^R^L^L :kl=^H:kd=^J:kr=^L:ku=^K:
I9|ibm|ibm3101|3101|i3101|IBM 3101-10:\
:if=/usr/lib/tabset/3101:\
:am:bs:cl=^[K:li#24:co#80:nd=^[C:up=^[A:cd=^[J:ce=^[I:\
:kd=\EB:kl=\ED:kr=\EC:ku=\EA:ho=^[H:cm=\EY%+\40%+\40:pt:
L3|digilog|333|digilog 333:bs:co#80:ce=\030:ho=^n:li#16:nd=^i:up=^o:
# uses xon/xoff, so no padding needed. ks/ke have nothing to do with arrow
# keys. is sets 80 col mode, normal video, autowrap on (for am).
# Seems to be no way to get rid of status line.
M1|tab132|tab|tab132/15|tab 132/15:is=\E[?7h\E[?3l\E[?5l:dN@:ks@:ke@:\
:da:db:al=\E[L:dl=\E[M:dc=\E[P:ei=\E[4l:im=\E[4h:cm=\E[%i%d;%dH:\
:ku=\E[A:kd=\E[B:kl=\E[D:tc=vt100:
M2|tab132w:co#132:is=\E[?7h\E[?3h\E[?5l:tc=tab132:
M3|tab132rv:is=\E[?7h\E[?3l\E[?5h:tc=tab132:
M4|tab132wrv:is=\E[?7h\E[?3h\E[?5h:tc=tab132w:
M5|mw2|Multiwriter 2:\
:co#132:hc:os:de#001202:
M6|trs80|trs-80|radio shack trs-80 Model I:\
:am:bs:co#64:li#16:
M7|d800|Direct 800/A:\
:co#80:li#24:am:cl=\E[1;1H\E[2J:bs:cm=\E[%i%d;%dH:\
:nd=\E[C:up=\E[A:ce=\E[K:cd=\E[J:\
:if=/dskb/rcd/.dinit:\
:so=\E[7m:se=\E[0m:us=\E[4m:ue=\E[0m:xs:vs=\E[>12l:ve=\E[>12h:\
:sf=\ED:sr=\EM:da:db:as=\E[1m:ae=\E[0m:ms:pt:\
:kl=\E[D:kr=\E[C:ku=\E[A:kd=\E[B:\
:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
:k5=\EOT:k6=\EOU:k7=\EOV:k8=\EOW:
M8|vc404|volker-craig 404:\
:am:bs:cd=40^W:ce=20^V:cl=40^X:cm=^P%+ %+ :co#80:ho=40^Y:\
:kd=^J:kl=^H:kr=^U:ku=^Z:li#24:ma=^Z^P^U :nd=^U:up=^Z:
M9|vc404s|volker-craig 404 w/standout mode:\
:se=^O:so=^N:tc=vc404:
MA|vc404na|volker-craig 404 w/no arrow keys:ma@:kr@:ku@:tc=vc404:
MB|vc404sna|volker-craig 404 w/standout mode and no arrow keys:\
:se=^O:so=^N:tc=vc404na:
# missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
MC|vc303a|vc403a|volker-craig 303a:\
:am:bs:ce=20^V:cl=40^X:co#80:ho=40^Y:kd=^J:kl=^H::kr=^U:\
:ku=^Z:li#24:ll=^P^@W:nd=^U:ns:up=^Z:
MD|vc303|vc103|vc203|volker-craig 303:\
:am:bs:cl=40^L:co#80:ho=40^K:kd=^J:kl=^H:kr=^I:ku=^N:li#24:\
:ll=^O\200W:nd=^I:ns:up=^N:
ME|ampex|d80|dialogue|dialogue80|ampex dialogue 80:\
:am:bs:pt:if=/usr/lib/tabset/stdcrt:cl=\E*:cm=\E=%+ %+ :\
:al=\EE:bt=\EI:ic=\EQ:im=:ei=:dl=\ER:dc=\EW:\
:ce=\Et:cd=\Ey:so=\Ej:se=\Ek:li#24:co#80:nd=^L:up=^K:
MF|aaadb|ann arbor ambassador 48/destructive backspace:\
:is=\E[48;0;0;48p\E[H\E[J\E[>30h\E[1Q\E[m:bs@:\
:vs=\E[>30l:ve=\E[>30h:tc=aaa:
MG|compucolor|compucolorII:\
:pt:am:cm=%r^C%.%.:bc=^Z:li#32:co#64:\
:cl=^L:ho=^H:nd=^Y:up=^\:
MH|d132|datagraphix|datagraphix 132a:\
:co#80:li#30:cl=^l:ho=\Et:da:db:sf=\Ev:sr=\Ew:\
:up=\Ek:nd=\El:vs=\ex:ve=\Em\En:\
:al=\E3:ic=\E5:dc=\E6:in:ic=\E5:
MI|soroc|Soroc 120:\
:cd=\EY:ce=\ET:cl=2\E*:ma=^K^P^R^L^L :\
:kl=^H:ku=^K:kr=^L:kd=^J:tc=adm3a:
Ma|aa|annarbor|ann arbor:\
:cm=^O%r%B%.%>^S^L%+@:co#80:li#40:bs:cl=2^L:up=^N:nd=^_:ho=^K:am:\
:kb=^^:kd=^J:ku=^N:kl=^H:kr=^_:kh=^K:ma=^_ ^N^P:
# Needs function keys added. Also can't use 60 line mode because it needs
# too much nl delay - can fix for nl but not out of vi.
# The cl delay is sufficent, but a smaller one could do.
# This entry is merged from Mike O'Brien@Rand and Howard Katseff at
# Bell Labs, and is untested.
Mb|aaa|ambas|ambassador|ann arbor ambassador/48 lines:\
:al=\E[L:am:bs:\
:cd=\E[0J:ce=\E[0K:cl=400\E[;H\E[0J:cm=\E[%i%d;%dH:co#80:\
:da:db:dc=\E[4h\E[1Q\E[P\E[4l\E[0Q:dc=\E[P:dl=\E[M:dm=\E[1Q:\
:ed=\E[0Q:ei=\E[0Q:ho=\E[;H:ic=\E[@:if=/usr/lib/tabset/aa:im=\E[1Q:\
:is=\E[48;0;0;48p\E[H\E[J\E[1Q\E[m:li#48:mi:\
:nd=\E[C:nl=\ED:pt:sf=\E[S:sr=\E[T:se=\E[m:so=\E[7m:up=\E[A:
Md|datapoint|dp3|dp3360|datapoint 3360:\
:am:bs:cd^_:ce=^^:cl=^]^_:co#82:ho=^]:li#25:nd=^x:up=^z:
Mg|dg|dg6053|data general 6053:\
ca:am:bs:cm=^P%r%.%.:cl=^L:ho=^H:nd=^S\
up=^W:ce=^K:co#80:li#24:
Mi|cdi|cdi1203:am:bs:hc:os:co#80:cD#200:
Mk|teletec|tec|Teletec Datascreen:\
:am:bs:co#80:cl=^l:ho=^^:li#24:nd=^_:up=^k:
# ^S is an arrow key! Boy is this guy in for a surprise on v7!
Ml|sol:\
:am:bs:cm=\E^1%.\E^2%.:cl=^K:ho=^N:co#64:li#16:nd=^S:up=^W:\
:kl=^A:kr=^S:ku=^W:kd=^Z:ma=^A^H^S ^W^P^Z^N:
Mn|xl83|Cybernex XL-83:\
:am:bs:cd=62^P:ce=3^O:cl=62^L:cm=^W%+ %+ :co#80:ho=^K:\
:kd=^J:kl=^H:ku=^N:li#24:up=^N:nd=^I:
Mo|omron|Omron 8025AG:\
:al=\EL:am:bs:cd=\ER:co#80:ce=\EK:cl=\EJ:da:db:dc=\EP:dl=\EM:\
:ho=\EH:li#24:nd=\EC:se=\E4:sf=\ES:so=\Ef:sr=\ET:up=\EA:ve=:vs=\EN:
Mp|plasma|plasma panel:am:bs:cl=^L:co#85:ho=^^:li#45:nd=\030:up=\026:
Ms|swtp|ct82|southwest technical products ct82:\
:am:bs:bc=^d:al=^\^y:cd=^v:ce=^F:cl=^L:cm=%r^k%.%.:co#82:li#20:\
:dl=^z:nd=^s:up=^a:so=^^^v:se=^^^F:dc=^\^h:ic=^\^x:ho=^p:\
:ei=:sf=^n:sr=^o:ll=^c:im=:\
:is=^\^r^^^s^^^d^]^w^i^s^^^]^^^o^]^w^r^i:
Mt|terak|Terak emulating Datamedia 1520:tc=dm1520:
My|mdl110|cybernex mdl-110:cm=^P%+ %+ :co#80:li#24:am:cl=70^X:bs:\
:nd=^U:up=^Z:ho=^Y:ce=145^N@^V:cd=145^NA^W:al=65^NA^N^]:\
:dl=40^NA^N^^:im=:\
:ei=:ic=3.5^NA^]:dm:ed:dc=3.5^NA^^:so=^NF:se=^NG:ta=43\t:\
:ma=^Z^P:cd=6^N@^V
Mz|zen30|z30|zentec 30:\
:mi:co#80:li#24:ma=^L ^R^L^K^P:ul:\
:al=1.5*\EE:bs:ce=1.0*\ET:cm=\E=%+ %+ :cl=\E*:\
:ho=^^:nd=^L:se=\EG0;so=\EG6:up=^K:im=\Eq:ei=\Er:\
:am:dc=\EW:dl=1.5*\ER:cd=\EY:
T3|33|tty33|tty|model 33 teletype:\
:co#72:hc:os:
T4|43|tty43|model 43 teletype:\
:kb=^h:am:bs:hc:os:co#132:
T7|37|tty37|model 37 teletype:\
:bs:hc:hu=\E8:hd=\E9:up=\E7:os:
Xa|tek|tek4012|4012|tektronix 4012:\
:is=\E^O:bs:cl=1000\E^L:co#75:ns:li#35:os:
Xb|tek4013|4013|tektronix 4013:\
:as=\E^N:ae=\E^O:tc=4012:
Xc|tek4014|4014|tektronix 4014:\
:is=\E^O\E9:co#81:li#38:dF#1000:tc=tek4012:
Xd|tek4015|4015|tektronix 4015:\
:as=\E^N:ae=\E^O:tc=4014:
Xe|tek4014sm|4014sm|tektronix 4014 in small font:\
:is=\E^O\E\072:co#121:li#58:tc=tek4014:
Xf|tek4015sm|4015sm|tektronix 4015 in small font:\
:as=\E^N:ae=\E^O:tc=4014sm:
# I think the 1000UP is supposed to be so expensive it never happens.
X4|tek4023|4023|tektronix 4023:\
:so=^_P:se=^_@:cm=\034%r%+ %+ :nd=\t:bs:cl=4\E^L:co#80:li#24:am:\
:up=1000UP:
# Can't use cursor motion because it's memory relative, and because
# it only works in the workspace, not the monitor. Same for home.
# Likewise, standout only works in the workspace.
X5|4025|4027|4024|tek4025|tek4027|tek4024|4025cu|4027cu|tektronix 4024/4025/4027:\
:is=\41com 31\r\n^_sto 9,17,25,33,41,49,57,65,73\r:\
:ks=^_lea p4 /h/\r^_lea p8 /k/\r^_lea p6 / /\r^_lea p2 /j/\r^_lea f5 /H/\r:\
:ke=^_lea p2\r^_lea p4\r^_lea p6\r^_lea p8\r^_lea f5\r:\
:am:bs:da:db:pt:li#34:co#80:cl=^_era\r\n\n:up=^K:nd=^_rig\r:\
:al=145^_up\r^_ili\r:dl=^_dli\r:\
:dc=^_dch\r:im=^_ich\r:ei=^F\n^K:nl=^F\n:\
:ce=^_dch 80\r:cd=^_dli 50\r:CC=^_:
X7|4025-17|4027-17|tek 4025 17 line window:li#17:tc=4025:
X8|4025-17ws|4027-17ws|tek 4025 17 line window in workspace:\
:is=\41com 31\r\n^_sto 9,17,25,33,41,49,57,65,73\r^_wor 17\r^_mon 17\r:\
:ti=^_wor h\r:te=^_mon h\r:so=^_att e\r:se=^_att s\r:tc=4025-17:
Xe|4025ex|4027ex|tek 4025 w/!:ti=\41com 31\r:te=^_com 33\r:\
:is=^_com 33\r\n\41sto 9,17,25,33,41,49,57,65,73\r:tc=4025:
# Regent: lowest common denominator, works on all regents.
a0|regent|adds regent series:\
:am:bs:cl=^L:cm=^K%+ ^P%B%.:co#80:ho=^A:li#24:ll=^A^Z:nd=^F:up=^Z:
# Regent 100 has a bug where if computer sends escape when user is holding
# down shift key it gets confused, so we avoid escape.
a1|regent100|adds regent 100:\
:cm=^K%+ ^P%B%.:k1=^B1\r:k2=^B2\r:k3=^B3\r:k4=^B4\r:\
:k5=^B5\r:k6=^B6\r:k7=^B7\r:k8=^B8\r:\
:kh=^A:kl=^U:kr=^F:ku=^Z:kd=^J:tc=regent:
# Regent 20, untested
a2|regent20|adds regent 20:\
:cd=\Ek:ce=\EK:cm=\EY%+ %+ :tc=regent:
a3|regent25|adds regent 25:\
:k0=^B0\r:k1=^B1\r:k2=^B2\r:k3=^B3\r:k4=^B4\r:\
:k5=^B5\r:k6=^B6\r:k7=^B7\r:k8=^B8\r:k9=^B9\r:\
:kh=^A:kl=^U:kr=^F:ku=^Z:kd=^J:tc=regent20:
# Regent 40: untested
a4|regent40|adds regent 40:\
:al=\EM:dl=\El:is=\EB:se=\E0@:so=\EOP:ue=\EO@:us=\E0`:vb=\ED\Ed:\
:tc=regent25:
# If you have standout problem with regent 200, try so=\ER\EOP:se=\E0@\EV:
a6|regent60|regent200|adds Regent 60:\
:dc=\EE:ei=\EF:im=\EF:is=\EV\EB:ko=dc,im,ei:tc=regent40:
a7|regent60na|regent 60 w/no arrow keys:\
kl@:kr@:ku@:kd@:tc=regent60:
# Note: if return acts weird on a980, check internal switch #2
# on the top chip on the CONTROL pc board.
ac|a980|adds consul 980:\
:al=13\E^N:am:bs:cl=^L\200^K@:cm=^K%+@\E^E%2:co#80:dl=13\E^O:\
:k0=\E0:k1=\E1:k2=\E2:k3=\E3:k4=\E4:k5=\E5:k6=\E6:k7=\E7:k8=\E8:k9=\E9:\
:li#24:nd=\E^E01:so=^Y^^^N:se=^O:up=9:
# Reports are that most of these Beehive entries (except superbee) have not been
# tested and do not work right. se is a trouble spot. Be warned.
b2|sb2|sb3|fixed superbee:xb@:tc=superbee:
bh|bh3m|beehiveIIIm:if=/usr/lib/tabset/beehive:\
:al=160^S:am:bs:cd=^R:ce=^P:cl=^E^R:co#80:dl=300^Q:ho=^E:li#20:ll=^E^K:\
:nd=^L:pt:se= ^_:so=^] :up=^K:
# This loses on lines > 80 chars long, use at your own risk
bi|superbeeic|super bee with insert char:\
:ic=:im=\EQ:ei=\ER:tc=superbee:
bm|microb|microbee|micro bee series:\
:am:bs:cd=\EJ:ce=\EK:cl=\EE:co#80:cm=\EF%+ %+ :\
:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:k9=\Ex:\
:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:\
:li#24:nd=\EC:pt:se=\Ed@ :so= \EdP:ue=\Ed@:up=\EA:us=\Ed`:
# Superbee - f1=escape, f2=^C.
# Note: there are at least 3 kinds of superbees in the world. The sb1
# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
# The sb3 puts garbage on the bottom of the screen when you scroll with
# the switch in the back set to CRLF instead of AEP. This description
# is tested on the sb2 but should work on all with either switch setting.
# The f1/f2 business is for the sb1 and the :xb: can be taken out for
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cm depends on there being
# 2048 bytes of memory and the hairy nl string.
bs|sb1|superbee|superb|beehive super bee:if=/usr/lib/tabset/stdcrt:is=\EE:\
:am:bs:cd=3\EJ:ce=3\EK:cl=3\EH\EJ:co#80:cm=\EF%r%3%3:cr=1000\r:\
:dC#10:da:db:xb:dc=3\EP:dl=100\EM:so=\E_1:se=\E_0:\
:li#25:nl=\n\200\200\200\n\200\200\200\EA\EK\200\200\200\ET\ET:\
:nd=\EC:pt:up=\EA:ho=\EH:ve=\n:\
:k1=\Ep:k2=\Eq:k3=\Er:k4=\Es:k5=\Et:k6=\Eu:k7=\Ev:k8=\Ew:\
:kd=\EB:kh=\EH:kl=\ED:kr=\EC:ku=\EA:
# From vax135!hpk Sat Jun 27 07:41:20 1981
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
# The old one also messed up running vi with a 132-character line-length.
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# Are not fixed.
c8|c108|c108-8|concept 108 w/8 pages and ^S/^Q:\
:ti=\EU\Evh 8p\Ep\r:te=\Ev ^A\177p\Ep\r\n:tc=c108-4:
cS|c108|c108-4|concept 108 w/4 pages and ^S/^Q:\
:is=\EU\E F\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E:\
:ti=\EU\Evh 8p\Ep\r:te=\Ev \177p\Ep\r\n:\
:al=\E^R:am:bs:cd=\E^C:ce=\E^S:cl=\E?\E▶05◀:cm=\Ea%+ %+ :co#80:\
:dc=\E^A:dl=\E^B:ei=\E\200:eo:im=\E^P:in:ip=:li#24:mi:nd=\E=:\
:kb=^h:ul:up=\E;:db:us=\EG:ue=\Eg:xn:vs=\EW:ve=\Ew:\
:vb=\Ek\200\200\200\200\200\200\200\200\200\200\200\200\200\200\EK:\
:us=\EG:ue=\Eg:ks=\EX:ke=\Ex:ku=\E;:kd=\E<:kl=\E>:kr=\E=:kh=\E?:\
:k1=\E5:k2=\E6:k3=\E7:so=\ED\EE:se=\Ed\Ee
# Some tty drivers use cr3 for concept, others use nl3, hence dN/dC below.
# 2 nulls padding on te isn't always enough. 6 works fine. Maybe less
# than 6 but more than 2 will work.
# It seems rather strange to have is end in escape. Seems to reprogram
# arrow keys to send escape sequences instead of whatever sequences.
cp|c100rvpp|c100rv4ppp|c100 with printer port:\
:is=\EU\Ef\E7\E5\E8\El\ENH\Ek\E\200\Eo&\200\Eo!\200\EQ"\EY(^W\Eo\47\E:\
:tc=c100rv:
cn|c100rvna|c100rv4pna|c100 with no arrows:ks@:ke@:tc=c100rv:
cs|c100s|slowconcept|slowconcept100|slow concept 100:\
:vb=\Ek\200\EK:pt:dC@:dN@:tc=c100:
cd|c100rvs|slow reverse concept 100:\
:vb=\EK\200\Ek:pt:dC@:dN@:tc=c100rv:
d0|vt100n|vt100 w/no init:is@:if@:tc=vt100:
d1|vt100|vt-100|pt100|pt-100|dec vt100:\
:co#80:li#24:cl=50\E[;H\E[2J:bs:am:cm=5\E[%i%2;%2H:nd=2\E[C:up=2\E[A:\
:ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:if=/usr/lib/tabset/vt100:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
:kh=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=5\EM:xn:\
:dl=\E7\E[%i%2;24r\E[24;0H\n\E[;r\E8:\
:al=\E7\E[%i%2;24r\E8\EM\E[;r\E8:xv:
d1|ovt100|vt-100|pt100|pt-100|dec vt100:\
:co#80:li#24:am:cl=50\E[;H\E[2J:bs:cm=5\E[%i%2;%2H:nd=2\E[C:up=2\E[A:\
:ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:if=/usr/lib/tabset/vt100:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:\
:kh=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=5\EM:xn:
d2|gt42|dec gt42:\
:bs:co#72:ns:li#40:os:
d3|vt132|vt-132:\
:al=99\E[L:dl=99\E[M:ip=7:dc=7\E[P:ei=\E[4l:im=\E[4h:xn:dN#30:tc=vt100:
d4|gt40|dec gt40:\
:bs:co#72:ns:li#30:os:
d5|vt50|dec vt50:\
:bs:cd=\EJ:ce=\EK:cl=\EH\EJ:co#80:li#12:nd=\EC:pt:up=\EA:
d6|vt102:\
cs=\E[%i%d;%dr:xo:tc=vt100
dI|dw1|decwriter I:\
:bs:co#72:hc:os:
dh|vt50h|dec vt50h:\
:bs:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :co#80:li#12:nd=\EC:\
:pt:sr-100s|pt100s|pt-100s|dec vt100 132 cols 14 lines:\
:li#14:tc=vt100w:
dt|vt100w|vt-100w|pt100w|pt-100w|dec vt100 132 cols:\
:co#128:li#24:is=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h:tc=vt100:
dv|vt52|dec vt52:\
:bs:cd=\EJ:ce=\EK:cl=\EH\EJ:cm=\EY%+ %+ :co#80:li#24:nd=\EC:\
:pt:sr=\EI:up=\EA:ku=\EA:kd=\EB:kr=\EC:kl=\ED:
dw|dw2|dw3|dw4|decwriter II:\
:kb=^h:bs:co#132:hc:os:
e1|ep48|ep4080|execuport 4080:am:bs:os:co#80:hu=\036:hd=\034:
e2|ep40|ep4000|execuport 4000:am:bs:os:co#136:hu=\036:hd=\034:
g2|1200|tn1200|terminet 1200:\
:co#120:hc:os:
g3|300|tn300|terminet 300:\
:co#120:hc:os:
# Infoton is now called General Terminal Corp. or some such thing.
# gt100 sounds like something DEC would come out with. Lets hope they don't.
i1|i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100):\
:cl=^L:cd=\EJ:ce=\EK:li#24:co#80:\
:al=\EL:dl=\EM:up=\EA:nd=\EC:ho=\EH:cm=\Ef%r%+ %+ :vb=\Eb\Ea:am:bs:\
:so=\Eb:se=\Ea:
i4|i400|400|infoton 400:\
:if=/usr/lib/tabset/infoton_tabs:\
:al=\E[L:am:bs:ce=\E[N:cl=\E[2J:cm=%i\E[%3;%3H:co#80:dl=\E[M:li#25:\
:nd=\E[C:up=\E[A:im=\E[4h\E[2Q:ei=\E[4l\E[0Q:\
:dc=\E[4h\E[2Q\E[P\E[4l\E[0Q:
ia|addrinfo:\
:li#24:co#80:cl=^L:ho=^H:nd=^Y:cd=^K:\
:up=^\:am:bc=^Z:cm=\037%+\377%+\377:ll=^H^\:
ik|infotonKAS:\
:am:bc=^Z:cd=^K:cl=^L:co#80:li#24:nd=^Y:up=^\:ll=^H^\:
kA|h19A|heathA|h19A|heathkitA|heathkit h19 ansi mode:\
:al=1*\E[1L:am:bs:cd=\E[J:ce=\E[K:cl=\E[2J:cm=\E[%i%2;%2H:co#80:\
:dc=\E[1P:dl=1*\E[1M:dn=\E[1B:ei=\E[4l:ho=\E[H:im=\E[4h:li#24:mi:\
:nd=\E[1C:as=\E[10m:ae=\E[11m:ms:pt:se=\E[0m:so=\E[7m:up=\E[1A:\
:vs=\E[>4h:ve=\E[>4l:kb=^h:ku=\E[1A:kd=\E[1B:kl=\E[1D:kr=\E[1C:\
:kh=\E[H:kn#8:k1=\EOS:k2=\EOT:k3=\EOU:k4=\EOV:k5=\EOW:l6=blue:\
:l7=red:l8=white:k6=\EOP:k7=\EOQ:k8=\EOR:\
:sr=\EM:is=\E<\E[>1;2;3;4;5;6;7;8;9l\E[0m\E[11m\E[?7h:
kB|h19bs|heathkit w/keypad shifted:ks=\Et:ke=\Eu:tc=h19b:
kU|h19us|heathkit w/keypad shifted/underscore cursor:ks=\Et:ke=\Eu:tc=h19u:
ku|h19u|heathkit with underscore cursor:vs@:ve@:tc=h19b:
# If the adm31 gives you trouble with standout mode, check the DIP switch
# in position 6, bank @c11, 25% from back end of pc. Should be OFF.
# If there is no such switch, you have an old adm31 and must use oadm31
l1|adm31|31|lsi adm31:is=\Eu\E0:\
:al=\EE:am:bs:ce=\ET:cm=\E=%+ %+ :cl=\E*:cd=\EY:co#80:dc=\EW:dl=\ER:\
:ei=\Er:ho=^^:im=\Eq:k0=^A0\r:k1=^A1\r:k2=^A2\r:k3=^A3\r:k4=^A4\r:\
:k5=^A5\r:k6=^A6\r:k7=^A7\r:k8=^A8\r:k9=^A9\r:kd=^J:kl=^H:kr=^L:ku=^K:\
:li#24:ma=j^Jk^P^K^Pl ^R^L^L :mi:nd=^L:\
:se=\EG0:so=\EG1:up=^K:us=\EG1:ue=\EG0:
l2|adm2|lsi adm2:\
:al=\EE:am:bs:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :co#80:dc=\EW:dl=\ER:\
:ei=:ho=^^:ic=\EQ:im=:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:li#24:nd=^L:up=^K:
l4|adm42|42|lsi adm42:vs=\EC\E3 \E3(:\
:al=270\EE:am:bs:cd=\EY:ce=\ET:cl=\E;:cm=\E=%+ %+ :co#80:\
:dc=\EW:dl=\ER:ei=\Er:im=\Eq:ip=6*:li#24:\
:bt=\EI:nd=^L:se=\EG0:so=\EG4:ta=\t:up=^k:\
:ma=^K^P:pc=\177:
l5|adm5|5|lsi adm5:\
:cd=\EY:ce=\ET:do=^J:kb=^H:kd=^J:kh=^^:kl=^H:kr=^L:ku=^K:\
:ma=^Hh^Jj^Kk^Ll^^H:se=\EG:sg#1:so=\EG:tc=adm3a:
lb|adm3a+|3a+:kl=^H:kd=^J:ku=^K:kr=^L:tc=adm3a:
lo|oadm31|o31|old adm31:so=\EG4:us@:ue@:tc=adm31:
# These mime1 entries refer to the Microterm Mime I or Mime II.
# The default mime is assumed to be in enhanced act iv mode.
m3|mime3a|mime1 emulating 3a:\
:am@:ma=^X ^K^J^Z^P:ku=^Z:kd=^K:kl=^H:kr=^X:tc=adm3a:
m4|microterm|act4|microterm act iv:\
:am:bs:cd=^_:ce=^^:cl=^L:cm=^T%.%.:co#80:li#24:nd=^X:up=^Z:ho=^]:
# The padding on sr and ta for act5 and mime is a guess and not final.
m5|microterm5|act5|microterm act v:\
:uc=\EA:pt:ta=2^I:sr=3\EH:ku=^Z:kd=^K:kl=^H:kr=^X:ma=^Z^P^Xl^Kj:tc=act4:
# act5s is not tested and said not to work.
mS|act5s|skinny act5:ti=\EP:te=\EQ:li#48:co#39:tc=act5:
# Mimes using brightness for standout. Half bright is really dim unless
# you turn up the brightness so far that lines show up on the screen.
# uc is disabled to get around a curses bug, and should be put back in someday.
mf|mimefb|full bright mime1:so=^Y:se=^S:uc@:is=^S\E:tc=mime:
mh|mimehb|half bright mime1:so=^S:se=^Y:uc@:is=^Y\E:tc=mime:
# These termcaps (for mime 2a) put the terminal in low intensity mode
# since high intensity mode is so obnoxious.
ms|mime2as|microterm mime2a (emulating an enhanced soroc iq120):\
:al=20*^A:am:bs:cd=20*\EJ:ce=\EK:cl=\EL:cm=\E=%+ %+ :co#80:dc=\ED:\
:dl=20*^W:kl=^H:kr=^L:ku=^K:kd=^J:ho=^^:is=\E):sr=\EI\
:im=\EE:ei=^Z:ip=2:li#24:nd=^L:so=\E\072:se=\E;:up=\EI:\
:us=\E6:ue=\E7:
# This is the preferred mode (but ^X can't be used as a kill character)
mv|mime2a|mime2av|microterm mime2a (emulating an enhanced vt52):\
:al=20*^A:bs:cd=20*\EQ:co#80:ce=\EP:cl=\EL:cm=\EY%+ %+ :is=^Y\
:dc=^N:dl=20*^W:ip=2:ei=^Z:ho=\EH:im=^O:kd=\EB:kl=\ED:kr=\EC:ku=\EA:\
:li#24:nd=\EC:pt:se=\E9:so=\E8:up=\EA:sr=\EA:us=\E4:ue=\E5:
mx|mime3ax|mime1 emulating enhanced 3a:\
:al=80^A:dl=80^W:pt:ce=^X:cd=^_:tc=mime3a:
pe|pe550|perkin elmer 550:\
:bs:co#80:ce=20\EI:cl=20\EK:cm=\EX%+ \EY%+ :\
:ho=\EH:li#24:ll=\EH\EA:nd=\EC:up=\EA:
:ma=^Z^P:cd=6^N@^V:
pf|fox|perkin elmer 1100:if=/usr/lib/tabset/stdcrt:\
:am:bs:cd=5.5*\EJ:ce=\EI:cl=132\EH\EJ:co#80:ho=\EH:li#24:\
:ll=\EH\EA:nd=\EC:cm=\EX%+ \EY%+ :up=\EA:vb=^P^B^P^C:
po|owl|perkin elmer 1200:if=/usr/lib/tabset/stdcrt:\
:al=5.5*\EL:am:bs:cd=5.5*\EJ:ce=5.5\EI:cl=132\EH\EJ:ho=\EH:ll=\EH\EA:\
:cm=\EX%+ \EY%+ :co#80:dc=5.5*\EO:dl=5.5*\EM:ei=:ic=\EN:im=:ip=5.5*:\
:kb=^h:in:li#24:nd=\EC:up=\EA:se?=\E!\200:so?=\E!^H:vb=^P^B^P^C:\
:k1=\ERA:k2=\ERB:k3=\ERC:k4=\ERD:k5=\ERE:k6=\ERF:\
:k7=\ERG:k8=\ERH:k9=\ERI:k0=\ERJ:
qB|bc|bill croft homebrew:\
:am:bs:cm=\E=%+ %+ :cl=^Z:co#96:ho=^^:li#72:\
:nd=^L:up=^K:vb=:
qN|nucterm|rayterm|NUC homebrew:\
:am:bs:cl=1^L:li#24:co#80:nd=^C:up=^N:ho=^B:ll=^K:ce=^A:cd=^E:
qb|ex3000:\
:li#24:co#80:ho=^Q:
qc|carlock|klc:\
:al=^E:am:bs:ce=^U:cl=100^Z:cm=\E=%+ %+ :co#80:dc=\177:dl=^D:dm=:\
:ed=:ei=^T:ho=^^:im=^T:li#24:nd=^L:se=^V:so=^V:up=^K:vb=\EV\EV:
qe|exidy|exidy2500|exidy sorcerer as dm2500:\
:al=^P^J^X:am:bs:ce=^W:cl=^^:cm=^L%r%n%.%.:co#64:\
:dc=\b:dl=^P^Z^X:dm=^P:ed=^X:ei=^X:ho=^B:ic=^\:\
:im=^P:li#30:nd=^\:pt:so=^N:se=^X:up=^Z:
qn|netx|netronics:\
:bs:cd=2000^F^E:ce=1600^E:cl=466^L:cm=\E=%+@%+@:co#64:ho=^D:\
:li#16:ma=j^Jk^Pl :nd=\E+@A:pc=\200:sr=\E=@@^K:up=^K:
# This came from the comp ctr who got it from some user. Smart indeed!
qs|sexidy|exidy smart:\
:li#24:co#64:cl=^l:ho=^q:nd=^s:up=^w:bs:bc=^a:ma=^x^J:kd=^S:
qu|ubell|ubellchar:if=/usr/staff/michael/term/startup:\
:am:bs:pt:ce=\Ed:cl=^Z:cm=\E=%+ %+ :co#80:li#24:nd=^L:up=^K:\
:ma=j^Jk^P^K^Pl :ho=^^:
qw|ttyWilliams:\
:co#80:li#12:bc=^Y:do=^K:up=^Z:cl=^^:ce=^_:am:ho=^]:nd=^X:
qx|xitex|xitex sct-100:\
:bs:cd=2000^F^E:ce=1600^E:cl=400^L:cm=\E=%+@%+@:co#64:ho=^D:\
:li#16:ma=j^Jk^Pl :nd=\E+@A:pc=\200:sr=\E=@@^K:up=^K:
t3|ti|ti700|ti733|735|ti735|ti silent 700:\
:bs:co#80:hc:os:dC#162:
t4|ti745|745|743|ti silent 745:\
:bs:co#80:hc:os:
t8|ti800|ti omni 800:\
:bs:co#132:hc:os:
# There are some tvi's that require incredible amounts of padding and
# some that don't. I'm assuming 912 and 920 are the old slow ones,
# and 912b, 912c, 920b, 920c are the new ones that don't need padding.
v1|tvi912|912|920|tvi920|old televideo:if=/usr/lib/tabset/stdcrt:\
:al=33*\EE:am:bs:ce=\ET:cm=\E=%+ %+ :cl=^Z:co#80:dc=\EW:dl=33*\ER:ei=:\
:kb=^h:ku=^K:kd=^J:kl=^H:kr=^L:k0=^A@\r:k1=^AA\r:k2=^AB\r:k3=^AC\r:\
:k4=^AD\r:k5=^AE\r:k6=^AF\r:k7=^AG\r:k8=^AH\r:k9=^AI\r:\
:ho=^^:im=:ic=\EQ:li#24:nd=^L:pt:se=\Ek:so=\Ej:up=^K:us=\El:ue=\Em:\
:ma=^K^P^L :sg#1:ug#1:
v2|912b|912c|920b|920c|tvi|new televideo 912/920:\
:al=5*\EE:dl=5*\ER:tc=912:
# set to page 1 when entering ex (\E-17 )
# reset to page 0 when exiting ex (\E-07 )
v2|tvi9122p|tvi9202p|9122p|9202p|tvi2p|televideo w/2 pages:\
:ti=\E-17 :te=\E-07 :tc=tvi912:\
va|tvi950-ap|tvi 950 w/alt pages:is=\E\\1:ti=\E-06 :te=\E-16 :tc=tvi950:
vf|tvi950-4p|tvi 950 w/4 pages:ti=\E\\1:te=\E\\3:tc=tvi950:
vl|tvi950b|bare tvi950 no is:is@:ks=\El:ke=\Ek:tc=tvi950:
vs|tvi950ns|tvi950 w/no standout:so@:se@:us@:ue@:tc=tvi950:
vt|tvi950-2p|tvi 950 w/2 pages:ti=\E\\1:te=\E\\2:tc=tvi950:
# The following tvi descriptions from B:pjphar
# is for all 950 sets the following attributes:
# full duplex (\EDF) write protect off (\E()
# conversation mode (\EC) graphics mode off (\E%)
# white on black (\Ed) auto page flip off (\Ew)
# turn off status line (\Eg)
# normal video (\E0) monitor mode off (\EX or \Eu)
# edit mode (\Er) load blank char to space (\Ee\040)
# line edit mode (\EO) enable buffer control (^O)
# protect mode off (\E\047) local edit keys (\Ek)
# program unshifted send key to send line all (\E016)
# program shifted send key to send line unprotected (\E004)
# set the following to nulls:
# field delimiter (\Ex0\200\200)
# line delimiter (\Ex1\200\200)
# start-protected field delimiter (\Ex2\200\200)
# end-protected field delimiter (\Ex3\200\200)
# set end of text delimiter to carriage return/null (\Ex4\r\200)
# clear all column tabs (\E3)
#
# tvi950 sets duplex (send) edit keys (\El) when entering vi
# sets local (no send) edit keys (\Ek) when exiting vi
#
v5|tvi950|950|televideo950:if=/usr/lib/tabset/stdcrt:\
:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E\047\E(\E%\Ew\EX\Ee ^O\
\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\
\Ex3\200\200\Ex4\r\200\E3:\
:al=\EE:am:bs:bt=\EI:cd=\Ey:ce=\Et:cl=\E*:cm=\E=%+ %+ :\
:co#80:dc=\EW:dl=\ER:do=^V:ei=\Er:ho=^^:im=\Eq:k0=^A0\r:\
:k1=^A@\r:k2=^AA\r:k3=^AB\r:k4=^AC\r:k5=^AD\r:k6=^AE\r:\
:k7=^AF\r:k8=^AG\r:k9=^AH\r:kb=^H:kd=^V:kh=^^:kl=^H:\
:ko=ic\054dc\054al\054dl\054cl\054bt\054ce\054cd:kr=^L:\
:ku=^K:li#24:ma=^Vj^Kk^Hh^Ll^^H:mi:ms:nd=^L:pt:se=\EG0:\
:sg#1:so=\EG4:sr=\Ej:ue=\EG0:ug#1:up=^K:us=\EG8:\
:vb=\Eb\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Ed:\
:ve=\Ek:vs=\El:xn:
#
# is for 950 with two pages adds the following:
# set 48 line page (\E\\2)
# place cursor at page 0, line 24, column 1 (\E-07 )
#
# two page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 48 line page (\E\\2)
# place cursor at 0,24,1 (\E-07 )
#
v3|tvi9502p|9502p|televideo950 w/2 pages:\
:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E\047\E(\E%\Ew\EX\Ee ^O\
\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\
\Ex3\200\200\Ex4\r\200\E\\2\E-07 \E3\
:te=\E\\2\E-07 :ti=\E\\1\E-07 :tc=tvi950:
#
# is for 950 with four pages adds the following:
# set 96 line page (\E\\3)
# place cursor at page 0, line 24, column 1 (\E-07 )
#
# four page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 96 line page (\E\\3)
# place cursor at 0,24,1 (\E-07 )
#
v4|tvi9504p|9504p|televideo950 w/4 pages:\
:is=\EDF\EC\Ed\EG0\Eg\Er\EO\E\047\E(\E%\Ew\EX\Ee ^O\
\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\
\Ex3\200\200\Ex4\r\200\E\\3\E-07 \E3\
:te=\E\\3\E-07 :ti=\E\\1\E-07 :tc=tvi950:
#
# is for reverse video 950 changes the following:
# set reverse video (\Ed)
#
# set vb accordingly (\Eb ...nulls... \Ed)
#
vr|tvi950rv|950rv|televideo950 rev video:if=/usr/lib/tabset/stdcrt:\
:is=\EDF\EC\Eb\EG0\Eg\Er\EO\E\047\E(\E%\Ew\EX\Ee ^O\
\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\
\Ex3\200\200\Ex4\r\200\E3:\
:vb=\Ed\200\200\200\200\200\200\200\200\200\200\200\200\200\200\200\Eb:\
:tc=tvi950:
#
# uses the appropriate entries from 9502p and 950rv
#
v3|tvi950rv2p|950rv2p|televideo950 rev video w/2 pages:\
:is=\EDF\EC\Eb\EG0\Eg\Er\EO\E\047\E(\E%\Ew\EX\Ee ^O\
\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\
\Ex3\200\200\Ex4\r\200\E\\2\E-07 \E3\
:te=\E\\2\E-07 :ti=\E\\1\E-07 :tc=tvi950rv:
#
# uses the appropriate entries from 9504p and 950rv
#
vR|tvi950rv4p|950rv4p|televideo950 rev video w/4 pages:\
:is=\EDF\EC\Eb\EG0\Er\EO\E\047\E(\E%\Ew\EX\Ee ^O\
\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\
\Ex3\200\200\Ex4\r\200\E\\3\E-07 \E3\
:te=\E\\3\E-07 :ti=\E\\1\E-07 :tc=tvi950rv:
# Note two things called "teleray". Reorder should move the common one
# to the front if you have either. A dumb teleray with the cursor stuck # on the bottom and no obvious model number is probabl
y1|t3700|teleray|dumb teleray 3700:\
:bs:cl=^L:co#80:li#24:
y3|t3800|teleray 3800 series: \
:bs:cd=\EJ:ce=\EK:cl=^L:cm=\EY%+ %+ :co#80: \
:do=\n:ho=\EH:li#24:ll=\EY7 :nd=\EC:pt:up=^K:
y6|t1061|t10|teleray|teleray 1061:if=/usr/lib/tabset/teleray:\
:al=2*\EL:am:bs:cd=1\EJ:ce=\EK:cl=1^L:cm=\EY%+ %+ :co#80:\
:dc=\EQ:dl=2*\EM:ei=:ho=\EH:ic=\EP:im=:ip=0.4*:\
:k1=^Z1:k2=^Z2:k3=^Z3:k4=^Z4:k5=^Z5:k6=^Z6:k7=^Z7:k8=^Z8:\
:li#24:nd=\EC:pt:se=\ER@:so= \ERD:\
:is=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef:\
:up=\EA:us=\ERH:ue=\ER@:xs:xt:sg=2:ug=1:
yf|t1061f|teleray 1061 with fast PROMs:\
al=\EL:ip@:dl=\EM:tc=t1061:
#
# ----
# Convention: First entry is two chars, first char is manufacturer,
# second char is canonical abbreviation for model or mode.
# Second entry is canonical abbreviation.
# Third entry is the one the editor will print with "set" command.
# Last entry is verbose description.
# Others are mnemonic synonyms for the terminal.
#
# If you absolutely MUST check for a specific terminal (this is discouraged)
# check for the 2nd entry (the canonical form) since all other codes are
# subject to change. The two letter codes are there for version 6 and are
# EXTREMELY subject to change, or even to go away if version 6 becomes for
# all practical purposes obsolete.
#
# Special manufacturer codes:
# M: Misc. (with only a few terminals)
# q: Homemade
# s: special (dialup, etc.)
#
# This file is to be installed with an editor script that moves the most
# common terminals to the front of the file. If the source is not available,
# it can be constructed by sorting
# the above entries by the 2 char initial code.
Sf|ansi|vision|vi1000|fastansi|Ansi X3.64 standard:\
:co#80:li#24:cl=\E[H\E[2J:bs:cm=\E[%i%d;%dH:nd=\E[C:up=\E[A:\
:cb=\E[1K:ce=\E[K:cd=\E[J:so=\E[1m:se=\E[m:us=\E[4m:ue=\E[m:\
:is=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
:if=/usr/lib/tabset/vt100:ku=\E[A:kd=\E[B:kr=\E[C:kl=\E[D:\
:kh=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=5\EM:cs.=\E[%i%d;%dr:\
:al=\E[L:dl=\E[M:\
:vb=\E[?5h\200\200\200\200\200\200\200\200\200\200\E[?5l:xo: