DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Hard and Floppy Disks

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Hard and Floppy Disks

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦109954466⟧ TextFile

    Length: 21398 (0x5396)
    Types: TextFile
    Names: »EVENT_TEXTS«

Derivation

└─⟦8c095a7f3⟧ Bits:30005798 CR80 Disc Pack ( Vol ILS systemdisk XAMOS TOS 10:01 hard boot #43c 19-7-87/JFJ )
    └─ ⟦this⟧ »EVENT_TEXTS« 
└─⟦c2e810e96⟧ Bits:30005799 CR80 Disc Pack ( XAMOS 841129 ILS TOS 10-01 System Disk Tilhører ILS/MSG hard boot boot entry #43c )
    └─ ⟦this⟧ »EVENT_TEXTS« 

TextFile

% 10 1 EPROC : FATAL DISC ERROR , COMPLETION CODE = @H1
% 11 1 EPROC : EVENT LOG FILE IS FULL
% 12 1 EPROC : EVENT LOG FILE ERROR, COMPLETION CODE = @H1
% 13 2 EPROC : Message with illegal data lenght = @D1 bytes received.
% 14 2 EPROC : Message with illegal header lenght  = @D1 bytes received.
% 15 3 EPROC : CLOSE DOWN / EPROC INACTIVE.
% 16 2 EPROC : Error in dismantling event log file during rename,CC= @H1. File not renamed.
% 17 2 EPROC : Error in opening directory during rename of event log file, CC= @H1. File not renamed.
% 18 2 EPROC : Not at NMS. Logfile does not exist.
% 19 2 EPROC : Error in renaming of event log file, CC = @H1.
% 20 1 EPROC : FAILURE IN REOPENING EVENT LOG FILE DURING RENAME, CC= @H1.
% 21 3 EPROC : Event log file renamed to @A1,8.
% 22 1 EPROC : ERROR IN CREATING NEW EVENT LOG FILE, CC = @H1.
% 23 3 EPROC : New event log file created.
% 50 4 FROM NODE @N1 : @A2,100
% 102 2 FTP : File transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8 failed : I/O error  CC = @H37
% 103 2 FTP : Message with illegal data lenght = @D1 bytes received.
% 104 1 FTP : FATAL I/O ERROR, COMPLETION CODE = @H1.
% 105 2 FTP : Timeout on slave transfer of @A1,8/@A9,2 to/from node @A11,8.
% 106 2 FTP : Timeout on master transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8, last block = @D37.
% 107 2 FTP : Message with illegal op_code = @H1 received.
% 108 2 FTP : Message with excessive data lenght = @D1 bytes received.
% 109 3 File transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8 stopped by user, last block transfered = @D37.
% 110 3 File transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8 successfully completed.
% 111 2 FTP : Message with illegal transfer id = @D1 received, op_code = @D2.
% 112 3 FTP: Slave transfer of @A1,8/@A9,2 to/from node @A11,8 closed by master.
% 113 2 FTP : Sequence error in transfering file @A1,8/@A9,2@64,@A11,8 to @A19,7/@A27,2@64@A29,8, block number = @D37.
% 114 2 FTP : Message with illegal header lenght = @D1 bytes received.
% 120 2 FSP : Message with illegal header lenght = @D1 bytes received.
% 121 2 FSP : Message with illegal data lenght = @D1 bytes received.
% 122 2 FSP : Message with illegal op-code = @H1 received.
% 150 2 SYSM: Illegal header:@10Opco= @H1  Type= @H2  Dnod= @H3  D.eu= @H4@10Onod= @H5  O.eu= @H6  Flag= @H7  Hopc= @H8
% 151 2 SYSM: Transport I/F, protocol error : @H1
% 152 8 SYSM : Node @N2 connected.@S5
% 153 8 SYSM : Node @N2 disconnected.@S5
% 154 7 SYSM : Time set to @D2-@D3-@D4  @D5:@D6.@S1
% 155 3 SYSM : Software version at node @N1 is V@D2.
% 156 3 SYSM : TIME UPDATE NOT ALLOWED WHEN NMS CONNECTED.
% 157 3 SYSM : Date and time received from NMS as @D1-@D2-@D3 @D4:@D5.
% 158 1 SYSM : SYSM PROTOCOL ERROR NO. @D1 AT LINE @D2.
% 159 1 SYSM : ERROR IN APPENDFILE CC = @H1.
% 178 3 X25 : Trunk @D1 : Link up.@S3
% 179 3 X25 : Trunk @D1 : Link down.@S3
% 180 2 X25 : Trunk @D1 : Link error @D2.@S2
% 200 1 HSS : PARITY ERROR AT PAGE @D3 LOCATION @H2.@S4
% 201 1 HSS : ERROR IN CPU @D3.@S5
% 202 1 HSS : MEMORY TIMEOUT AT PAGE @D3 LOCATION @H2.@S4
% 203 2 HSS : ILLEGAL PACKET RECEIVED.@S6
% 204 2 HSS : LTU TEST * NO RESPONSE FROM PRM ON RESERVE LTU.@S4
% 205 2 HSS : LTU TEST * UNKNOWN ERRORCODE IN PRM BOOT RESPONSE - ERROR CODE = @H3.@S3
% 206 2 HSS : LTU TEST * ILLEGAL DEVICE.@S4
% 207 2 HSS : LTU TEST * ILLEGAL PROTOCOL ID.@S4
% 208 2 HSS : LTU TEST * FIRMWARE FILE COULD NOT BE FOUND ON DISC.@S4
% 209 2 HSS : LTU TEST * NO RESPONSE ON LTU HARDWARE TEST.@S4
% 210 2 HSS : LTU TEST * ILLEGAL BOOT RESPONSE PACKET.@S4
% 211 2 HSS : LTU TEST * LTU  SELFTEST ERROR, ERRORCODE = @H3.@S3
% 212 2 HSS : LTU TEST * NO RESPONSE ON TEST, MODE @D1, CHANNEL @H2.@S2
% 213 2 HSS : LTU TEST * ILLEGAL RESPONSE ON TEST MODE @D1, CHANNEL @H2.@S2
% 214 3 HSS : LTU TEST * MODE @D1, CHANNEL @H2, ERROR CODE @H3.@S1
% 215 2 HSS : LTU TEST * STRING MISMATCH IN MODE @D1, CHANNEL @H2.@S2
% 216 2 HSS : LTU TEST * RESET DRIVER CHANNEL @H2 FAILED.@S3
% 217 3 HSS : LTU TEST * NO ERRORS DETECTED.@S4
% 218 2 HSS : LTU TEST * TEST COMPLETED - ERRORS DETECTED.@S4
% 219 3 HSS : LTU TEST * PACKET ON STATUS QUEUE - ERROR CODE = @H3, SUB ERROR CODE = @H4.@S2
% 220 2 HSS : LTU TEST * ERROR WHEN RELEASING LTU.@S2
% 221 3 HSS : SYSTEM MEMORY CONFIGURATION :@10 @A5,100
% 300 1 BQM : LONG BUFFER POOL EXHAUSTED.
% 301 2 BQM : Long buffer pool depleted to threshold 1 (output).
% 302 2 BQM : Long buffer pool depleted to threshold 2 (throughput).
% 303 2 BQM : Long buffer pool depleted to threshold 3 (input).
% 310 1 BQM : SHORT BUFFER POOL EXHAUSTED.
% 311 2 BQM : Short buffer pool depleted to threshold 1 (output).
% 312 2 BQM : Short buffer pool depleted to threshold 2 (throughput).
% 313 2 BQM : Short buffer pool depleted to threshold 3 (input).
% 320 1 BQM : PDB POOL EXHAUSTED.
% 321 2 BQM : PDB pool depleted to threshold 1 (output).
% 322 2 BQM : PDB pool depleted to threshold 2 (throughput).
% 323 2 BQM : PDB pool depleted to threshold 3 (input).
% 400 2 XPORT : ERROR WITH CC= @H1 DETECTED IN @A2,2 AT LINE @D4.
% 600 5 PRM: LTU BANK CONNECTED @S6
% 601 5 PRM: LTU BANK DISCONNECTED @S6
% 602 3 PRM: LTU @H1, GROUP/CRATE @H2, NOW REPLACED BY SPARE LTU @S4
% 603 2 PRM: LTU @H1, GROUP/CRATE @H2, BOOT PROM INOPERABLE @S4
% 604 2 PRM: LTU @H1, GROUP/CRATE @H2, CHECKSUM ERROR IN BOOT @S4
% 605 2 PRM: LTU @H1, GROUP/CRATE @H2, UNRECOGNICED ERROR @S4
% 606 2 PRM: LTU @H1, GROUP/CRATE @H2, TIMEOUT OCCURRED (REMOVED?) @S4
% 607 3 PRM: LTU @H1, GROUP/CRATE @H2, ADDRESSABLE (REINSERTED?) @S4
% 608 3 PRM: LTU @H1, GROUP/CRATE @H2, LIA DISCONNECTED @S4
% 609 2 PRM: LTU @H1, GROUP/CRATE @H2, ALIVE-COUNTER STOPPED @S4
% 610 1 PRM: LTU @H1, GROUP/CRATE @H2, ABANDONED. PLEASE REPAIR ! @S4
% 611 1 PRM: LTU @H1, GROUP/CRATE @H2, INCORRECT SLOT POSITION (FATAL) @S4
% 612 1 PRM: LTU @H1, GROUP/CRATE @H2, LIA FAIL ? (NO CONNECTION) @S4
% 613 2 PRM: LTU @H1, GROUP/CRATE @H2, BOOT TERMINATION FAILED    @S4
% 614 3 PRM: SPARE LTU @H1, GROUP/CRATE @H2, NOW RELEASED @S4
% 615 3 @07 PRM TO OPERATOR: SWITCH 'IN' SPARE LTU, SLOT = @H2, GROUP/CRATE = @H1 @07 @S4
% 616 3 @07 PRM TO OPERATOR: SWITCH 'OUT' SPARE LTU, GROUP/CRATE = @H1 @07 @S5
% 620 2 PRM: IRRECOVERABLE FILE SYSTEM ERROR, LOC = @H1, CAUSE = @H2 @S4
% 621 1 PRM: ERROR ON FILE '@A7,8', COMPL. CODE = @H2 ( FATAL ) @S4
% 622 2 PRM: TIMEOUT ON ACCESS TO VOLUMEN '@A7,4', COMPL. CODE = @H2 ( FATAL ) @S4
% 623 1 PRM: ERROR ON BOOT FILE '@A7,8', INVALID CONTENT ( FATAL ) @S6
% 625 2 PRM: LTU @H1, GROUP/CRATE @H2, CR80 I/F QUE INACCESSABLE @S4
% 626 2 PRM: LTU @H1, GROUP/CRATE @H2, INVALID BUFFER ADDRESS ENCOUNTERED @S4
% 627 2 PRM: LTU @H1, GROUP/CRATE @H2, DOESN'T ACCEPT OPERATING MODE @S4
% 628 2 PRM: LTU @H1, GROUP/CRATE @H2, LINE STATUS GONE BAD @S4
% 629 2 PRM: LTU @H1, GROUP/CRATE @H2, CONFIGURATION FAILED @S4
% 630 1 PRM: IRRECOVERABLE S/W ERROR, LOC = @H1 , CAUSE = @H2 @S4
% 631 1 PRM: INVALID LTU CONFIGURATION, LTU DEVICE ADR. @H1 @S5
% 632 1 PRM: INVALID F/W CONFIG., LTU ADR. = @H1, PROTOCOL = @H2 @S4
% 640 3 PRM: ILLEGAL INPUT RECEIVED FROM END_USER @H1, OPCODE = @H2@S4
% 800 3 CTC PROCESS @H1 INITIALIZED @H2.
% 801 3 CTC PROCESS @H1 STARTED: TRUE/FALSE @H2.
% 802 3 CTC PROCESS @H1 STOPPED: TRUE/FALSE @H2.
% 803 3 CTC PROCESS @H1 STATE: @H2; @H3; @H4; @H5; @H6; @H7; @H8; @H9. .
% 804 3 INPUT ERROR TO PROCESS @H1.
% 810 3 MFH @H1 STARTED: TRUE/FALSE @H2 DUAL @H3,FEP1 ST @H4,FEP2 ST @H5.
% 812 3 FEP START MFH @H1,FEP @H2, TRUE/FALSE @H3.
% 813 3 MFH @H1, FEP @H2 STOPPED.
% 814 3 MFH @H1 , FEP'S SWITCHED, TRUE/FALSE @H2 ,STATE FEP_1 @H3 ,STATE FEP_2 @H4.
% 815 3 MFH @H1, FEP @H2 DOWN.
% 816 3 MFH @H1 ERROR ON CHANGE APPLICATION COMMAND.
% 817 3 MFH :@H1 ERROR ON APPL REQUEST AA:@H2 CB:@H3 CC: @H4 BB: @H5 LOG TERM NO: @H6
% 818 3 ERROR ON APPLICATION CHANGE COMMAND LMFH @H1.
% 819 3 SYSTEMSTATUS REPLY: LMFH: @H1, THIS FEP: @H2, OTHER FEP: @H3, THIS MF: @H4, AWWAY MF: @H5.
% 820 3 DIAL UP DONE: @H1, ON LINE: @H2.
% 821 3 BREAK OF DIAL UP DONE @H1.
% 830 3 RESP.MESS:START @D1:@D2:@D3,STOP @D4:@D5:@D6,LENGHT @D7,T.NUM @H8@10RESP.TIM MIN:@D9,AVG:@D10,MAX:@D11
% 835 3 ERROR ON RTM ERR.CODE @H1.
% 840 3 MFH@H1, NETWORK CLOSE DOWN ,REASON @H2.
% 841 3 MFH @H1, CONFIG VER NO  @H2@H3.
% 842 3 MFH @H1, FEP MESSAGE ERR MT_H.CC @H2.
% 843 2 FEP ERROR DETECTED : FEP_ID @H1, ERRORCODE = @H2, LOCATION = @H3, MFH_ID = @H4
% 0900 1 MFD : IRRECOVERABLE SW ERROR, CC = @H3, LOC = @H2.@S1
% 950 1 TMR : IRRECOVERABLE SW ERROR, CC = @H3, LOC = @H2.@S1
% 1000 2 CTR: ILLEGAL TERMINAL NUMBER, LL= @D2, LOC=@H1
% 1001 2 CTR: ILLEGAL 'APPLICATION AVAILABLE' MESSAGE FROM MF @D2, LOC=@H1
% 1002 2 CTR: ILLEGAL 'APPLICATION DISABLE' MESSAGE FROM MF @D2, LOC=@H1
% 1003 2 CTR: SYNTAX ERROR IN 'LOGICAL TERMINAL ERROR' MESSAGE, LOC=@H1
% 1004 2 CTR: SYNTAX ERROR IN 'CONFIGURATION ERROR' MESSAGE FROM MF @D2, LOC=@H1
% 1005 2 CTR: LINK OPENED MSG AT INCORRECT TIME FROM MF @D2, LOC=@H1
% 1006 3 CTR: MAINFRAME UP FROM MF @D2, LOC=@H1
% 1007 2 CTR: READY TO GO AT INCORRECT TIME FROM MF @D2, LOC=@H1
% 1008 3 CTR: DATA FOR TERMINAL NOT IN SESSION, LL=@D2, LOC=@H1
% 1009 2 CTR: SYNTAX ERROR IN OUTPUT FOR REMOTE TERMINAL, LL=@D2, LOC=@H1
% 1010 1 CTR: ILLEGAL INPUT FROM LINEHANDLER, OPCODE IS @H2, LOC=@H1
% 1011 3 CTR: NO RESOURCES FOR NEW SESSIONS, LL=@D2, LOC=@H1
% 1012 2 CTR: ILLEGAL BRANCH NUMBER ON INPUT FROM TERMINAL @D2, CCC=@A3,4 LOC=@H1
% 1013 2 CTR: ILLEGAL REGION NUMBER IN INPUT, LOC=@H1
% 1014 2 CTR: APPLICATION ALREADY AVAILABLE, LOC=@H1
% 1015 2 CTR: ILLEGAL APPLICATION NAME IN INPUT FROM TERMINAL @D2 LOC=@H1
% 1016 3 CTR: NO PSEUDO ID'S AVAILABLE, LOC=@H1
% 1017 2 CTR: ILLEGAL SESSION IDENTIFICATION, LOC=@H1
% 1018 2 CTR: SESSION CONNECTION RECORD CANNOT BE FOUND, LOC=@H1
% 1019 1 CTR: ERROR IN RESPONSE FROM FSP, OPCODE @H2, COMPLETION CODE @H3, LOC=@H1
% 1020 1 CTR: ERROR IN LOGICAL CONF. FILE XFER, LOC=@H1
% 1021 1 CTR: ERROR IN PHYSICAL CONF. FILE XFER, LOC=@H1
% 1022 1 CTR: ERROR IN REGION/BRANCH TABLE XFER, LOC=@H1
% 1023 3 CTR: LOGICAL CONFIGURATION TRANSFER OK, LOC=@H1
% 1024 3 CTR: PHYSICAL CONFIGURATION TRANSFER OK, LOC=@H1
% 1025 3 CTR: REGION/BRANCH  CONFIGURATION TRANSFER OK, LOC=@H1
% 1026 1 CTR: UNSOLICITED TIMER INPUT WITH OPCODE @H2, LOC=@H1
% 1027 1 CTR: UNSOLICITED FILE-SERVICE-PROCESS RESPONSE, OPCODE IS @H2, LOC=@H1
% 1028 1 CTR: I/O SYSTEM ERROR IN FSP RESPONSE, CC=@H2, LOC=@H1
% 1029 1 CTR: REGION/BRANCH TABLE TERMINATION RECORD ERROR, LOC=@H1
% 1030 1 CTR: UNSOLICITED INPUT FROM TRANSPORT MANAGER, OPCODE IS @H2, LOC=@H1
% 1031 1 CTR: UNSOLICITED INPUT FROM TRANSPORT SERVICE PROVIDER, OPCODE IS @H2, LOC=@H1
% 1032 1 CTR: CONNECT INDICATION SYNTAX ERROR, LOC=@H1
% 1033 1 CTR: OUTGOING ENDPOINT REFUSAL ERROR, LOC=@H1
% 1034 1 CTR: UNACCEPTABLE SERVICE GRADE PARAMETER IN CONNECT CONFIRM, LOC=@H1
% 1035 2 CTR: UNEXPECTED TRANSPORT CONNECTION DISCONNECT RECEIVED FROM NODE @N2, LOC=@H1
% 1036 1 CTR: ILLEGAL PIN NUMBER FROM TS, LOC=@H1
% 1038 2 CTR: MF INPUT SYNTAX ERROR, MF @D2, LOC=@H1
% 1039 2 CTR: SYNTAX ERROR IN PSEUDO ID RESERVATION MESSAGE, LOC=@H1
% 1040 3 CTR: MF @D2 IS DOWN, REASON @H3, LOC=@H1
% 1041 3 CTR: ILLEGAL TERMINAL INPUT: LL=@D3, TRANSACTION CODE @A2,1 LOC=@H1
% 1042 1 CTR: BQM ERROR ENCOUNTERED IN LOC @H1, ERROR CODE=@H2
% 1043 1 CTR: GENERAL SOFTWARE DETECTED ERROR, CODE @H2, LOC=@H1
% 1044 3 CTR: ILLEGAL MF NUMBER ENCOUNTERED, LOC=@H1
% 1045 3 CTR: ILLEGAL APPLICATION NAME ENCOUNTERED, LOC=@H1
% 1046 2 CTR: FAILED TO CONNECT TO REMOTE NODE @N2, LOC=@H1
% 1047 1 CTR: ILLEGAL PARAMETERS IN OE-ACCEPT, LOC=@H1
% 1048 3 CTR: CLOSE COMMAND RECEIVED BY CTR.@S6
% 1049 6 CTR: SYSTEM CLOSED DOWN.@S6
% 1050 2 CTR: ILLEGAL APPLICATION NAME RECEIVED FROM NODE @N1.@S5
% 1051 2 CTR: ILLEGAL TERMINAL NUMBER RECEIVED FROM NODE @N1.@S5
% 1052 1 CTR: ILLEGAL REGION NAME DISCOVERED IN R/B TABLE, BRANCH = @D2, LOC = @H1.
% 1053 1 CTR: ENCRYPTION ERROR, RESULT = @H3, OPCODE = @H2, LOC = @H1
% 1054 3 CTR: POS INPUT ERROR, TERMINAL NUMBER = @D1
% 1055 2 CTR: SECURITY MODULE ERROR, TERMINAL NUMBER = @D1, CODE = @H2
% 1100 10 SDM : Start update. @S6
% 1101 10 SDM : Stop update. @S6
% 1102 3 SDM : WD up. @S6
% 1103 3 SDM : WD down. @S6
% 1104 3 SDM : Send alive to WD failed. @S6
% 1105 3 SDM : LIA switch error: Crate no. @D1, Group no. @D2, Slot no. @H3.@S3
% 1107 1 SDM : LINK DOWN, CAUSE: @H1.@S5
% 1108 3 SDM : LINK UP.@S6
% 1110 3 SDM : Sequence number error on link. @S6
% 1111 3 SDM : Unexpected link input: @H1,@H2,@H3,@H4,@H5,@H6.
% 1112 3 SDM : Attempt to clear LTU FW. @S6
% 1113 3 SDM : Event: @D1 in state @D2 . New state: @D3 . @H4 . @S2
% 1114 1 SDM : ?.@S6
% 1115 3 SDM : Send to DT failed. @S6
% 1116 3 SDM : ?. @S6
% 1117 3 SDM : Software error detected, program location @H1. @S5
% 1118 3 SDM : IO error, completion code = @H2, location @H1. @S4
% 1119 1 SDM : OTHER FEP IS DOWN.@S6
% 1120 3 SDM : UPDATE STARTED.@S6
% 1121 3 SDM : UPDATE STOPPED.@S6
% 1122 3 SDM : C SENT @H1,@H2.@S4
% 1123 3 SDM : C REC @H1,@H2.@S4
% 1200 3 STATS : Statistics collection stopped.@S11
% 1201 3 STATS : Statistics collection started.@S11
% 1202 3 STATS : Statistics collection continues.@S11
% 1203 1 STATS : STATISTICS COLLECTION TERMINATED.@S11
% 1210 3 STATS : Node @N3 : No response.@S10
% 1211 3 STATS : Node @N3 : Transfer in progress.@S10
% 1212 3 STATS : Node @N3 : Transfer time-out.@S10
% 1213 3 STATS : Node @N3 : Transfer suspended.@S10
% 1214 3 STATS : Node @N3 : Transfer completed.@S10
% 1215 2 STATS : Node @N3 : TRANSFER ERROR.@S10
% 1230 1 STATS : INTERVENTION REQUIRED, FULL CAPACITY REACHED ON FILE @A4,8.@S3
% 1231 1 STATS : WARNING MESSAGE : 90@37 CAPACITY REACHED ON @A4,8.@S3
% 1232 2 STATS : Warning message : 80@37 capacity reached on @A4,8.@S3
% 1233 3 STATS : Warning message : 70@37 capacity reached on @A4,8.@S3
% 1250 1 STATS : INTERVENTION REQUIRED, FILE @A4,8 CANNOT BE CREATED ( CC= @H2 ).@S2
% 1251 1 STATS : INTERVENTION REQUIRED, FILE @A4,8 CANNOT BE OPENED (CC= @H2).@S2
% 1252 1 STATS : INTERVENTION REQUIRED, FILE @A4,8 CANNOT BE ACCESSED (CC= @H2).@S2
% 1299 1 STATS : S/W TERMINAL STATE : @H1 @H2 @H3 @H4 @H5 @H6 @H7 @H8 @H9 @H10 @H11.
% 1300 1 OLD : BQM ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3
% 1301 1 OLD : REGION ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3
% 1302 1 OLD : ERM ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3
% 1303 1 OLD : PTI ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3
% 1304 1 OLD : SOFTWARE ERROR IN MODULE @D1, LOCATION @H2,COMPLETION CODE @H3.@S3
% 4000 3 LINEHANDLER EVENT CODE: @D2 AT LOCATION: @H1. SEE MANUAL.@S2
% 4001 3 LHR: LINE @D1 UP.@S3
% 4002 3 LHR: LINE @D1 DOWN.@S3
% 4003 3 LHR: CLUSTER @D2 ON LINE @D1 UP.@S2
% 4004 3 LHR: CLUSTER @D2 ON LINE @D1 DOWN.@S2
% 4005 3 LHR: TERMINAL @D3 ON CLUSTER @D2 ON LINE @D1 UP.@S1
% 4006 3 LHR: TERMINAL @D3 ON CLUSTER @D2 ON LINE @D1 DOWN.@S1
% 4007 3 LHR: CLUSTER @D2 ON LINE @D1 REMOVED FOR LTU-SWITCH.@S2
% 4008 3 LHR: TERMINAL @D3 ON CLUSTER @D2 ON LINE @D1 MOVED.@S1
% 4009 3 LHR: ????? @H1 @H2 @H3 @H4
% 4010 3 LHR: ????? @H1 @H2 @H3 @H4
% 4011 3 LHR: ????? @H1 @H2 @H3
% 4012 3 LHR: ????? @H1 @H2
% 4013 3 LHR: ????? @H1
% 4014 3 LHR: LINE-FAILURE ON LINE @D1 CAUSED BY LTU-EVENT ON LTU @H2.@S2
% 4015 3 LHR: CURRENT THRESHOLD ON LINE @D1 (@D4 ERRORS / @D3@48 SECONDS) EXEEDED:@10 @D2 ERRORS IN LAST PERIOD.
% 4020 1 LHR: IRRECOVERABLE ERROR AT LOC: @H1 (INFORM. FOR PROGRAMMER:@H2,@H3,@H4)
% 4021 1 LHR: RECOVERABLE ERROR AT LOC: @H1 (INFORM. FOR PROGRAMMER:@H2,@H3,@H4)
% 4030 3 LHR: LINE @D1 UP ACCEPTED ON/FROM NODE @N4.@S3
% 4031 3 LHR: LINE @D1 DOWN ACCEPTED ON/FROM NODE @N4.@S3
% 4032 3 LHR: CLUSTER @D1 UP ACCEPTED ON/FROM NODE @N4.@S3
% 4033 3 LHR: CLUSTER @D1 DOWN ACCEPTED ON/FROM NODE @N4.@S3
% 4034 3 LHR: LINE-SPEED CHANGE ON LINE @D1 TO @H2@10ACCEPTED ON/FROM NODE @N4.@S2
% 4035 3 LHR: LINE-THRESHOLD CHANGE ON LINE @D1 TO: SAMPLETIME= @D2 SECONDS,@10 THRESHOLD= @D3 ERRORS ACCEPTED ON/FROM NODE @N4.
% 4036 3 LHR: TERMINAL SWITCH BETWEEN TERMINAL @D1 AND TERMINAL @D2@10ACCEPTED ON/FROM NODE @N4.@S2
% 4037 3 LHR: BLOCKSIZE CHANGE ON LINE @D1 TO @D2 ACCEPTED ON/FROM NODE @N4.@S2
% 4038 3 LHR: @H1 @H2 @H3 @H4
% 4039 3 LHR: @H1 @H2 @H3 @H4
% 4040 3 LHR: LINE @D1 UP REJECTED ON/FROM NODE @N4.@S3
% 4041 3 LHR: LINE @D1 DOWN REJECTED ON/FROM NODE @N4.@S3
% 4042 3 LHR: CLUSTER @D1 UP REJECTED ON/FROM NODE @N4.@S3
% 4043 3 LHR: CLUSTER @D1 DOWN REJECTED ON/FROM NODE @N4.@S3
% 4044 3 LHR: LINE-SPEED CHANGE ON LINE @D1 TO @H2@10REJECTED ON/FROM NODE @N4.@S2
% 4045 3 LHR: LINE-THRESHOLD CHANGE ON LINE @D1 TO: SAMPLETIME= @D2 SECONDS,@10 THRESHOLD= @D3 ERRORS REJECTED ON/FROM NODE @N4.
% 4046 3 LHR: TERMINAL SWITCH BETWEEN TERMINAL @D1 AND TERMINAL @D2@10REJECTED ON/FROM NODE @N4.@S2
% 4047 3 LHR: BLOCKSIZE CHANGE ON LINE @D1 TO @D2 REJECTED ON/FROM NODE @N4.@S2
% 4048 3 LHR: @H1 @H2 @H3 @H4
% 4049 3 LHR: @H1 @H2 @H3 @H4
% 4050 3 LHR: ILLEGAL OPERATION CODE IN WORKING MODE: "@H1"@10REJECTED ON/FROM NODE @N4.@S3
% 4051 3 LHR: ILLEGAL OPERATION CODE IN STAND BY MODE: "@H1"@10REJECTED ON/FROM NODE @N4.@S3
% 4096 2 LHR: EVENT AT LOC: @H1. CAUSE: UNKOWN.@10INFORM PROGRAMMER PARM1: @H2 PARM2: @H3 PARM3: @H4.
% 4097 2 LHR: EVENT AT LOC: @H1.@10CAUSE: ILLEGAL CONTENTS OF PHYSICAL CONFIGURATION FILE.@S3
% 4098 2 LHR: EVENT AT LOC: @H1.@10CAUSE: ILLEGAL CONTENTS OF LOGICAL CONFIGURATION FILE.@S3
% 4099 2 LHR: EVENT AT LOC: @H1. CAUSE: COMPLETION CODE = @H3 FROM FSTP.@10CONNECTED TO: GET CONFIGURATION FILE @H4.@S1
% 4101 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: LINE @D2 UP.@S2
% 4106 3 LHR: EVENT AT LOC: @H1. CAUSE: LINE ALREADY UP.@10CONNECTED TO: LINE @D2 UP.@S2
% 4111 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: LINE @D2 DOWN.@S2
% 4116 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: REMOVE CLUSTER.@S3
% 4121 2 LHR: EVENT AT LOC: @H1. CAUSE: TERMINAL NOT ASSIGNED.@10CONNECTED TO: REMOVE TERMINAL.@S3
% 4126 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: POLL COMMAND.@S3
% 4128 2 LHR: EVENT AT LOC: @H1. CAUSE: LINE SPEED TO BIG.@10CONNECTED TO: CHANGE LINE SPEED.@S3
% 4131 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER ALREADY ASSIGNED.@10CONNECTED TO: ASSIGN CLUSTER.@S3
% 4136 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: ASSIGN TERMINAL.@S3
% 4141 2 LHR: EVENT AT LOC: @H1. CAUSE: TERMINAL NOT ASSIGNED.@10CONNECTED TO: REMOVE TERMINAL.@S3
% 4146 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: REMOVE TERMINAL.@S3
% 4151 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL OPCODE.@10CONNECTED TO: STANDBY MODE.@S3
% 4156 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: LINE THRESHOLD STATISTICS INFO.@S3
% 4161 2 LHR: EVENT AT LOC: @H1. CAUSE: 1'ST TERMINAL NOT ASSIGNED.@10CONNECTED TO: TERMINAL SWITCH.@S3
% 4166 2 LHR: EVENT AT LOC: @H1. CAUSE: 2'ND TERMINAL NOT ASSIGNED.@10CONNECTED TO: TERMINAL SWITCH.@S3
% 4171 2 LHR: EVENT AT LOC: @H1. CAUSE: NO PREVIOUS CLUSTER DOWN.@10CONNECTED TO: CLUSTER UP.@S3
% 4176 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: CLUSTER UP.@S3
% 4181 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER ALREADY COMMANDED DOWN.@10CONNECTED TO: CLUSTER DOWN.@S3
% 4186 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: CLUSTER DOWN.@S3
% 4188 1 LHR: ERROR AT LOC: @H1. CAUSE: LTU COULD NOT BE ACCEPTED.@10CONNECTED TO: NEW DEVICE (LTU).@S3
% 4189 1 LHR: DEVICE TABLES CORRUPTED DEGRADED MODE SELECTED.@10NEW LTU: @H2, OLD LTU: @H3, PROTOCOL: @H4 COULD NOT BE SOLVED.@S1
% 4190 2 LHR: EVENT AT LOC: @H1. CAUSE: LTU ADDRESS: @H2.@10DEALLOCATION COULD NOT BE SOLVED.@S2
% 4191 2 LHR: EVENT AT LOC: @H1. CAUSE: DEVICE TABLE NOT FOUND.@10CONNECTED TO: FIND DEVICE TABLE.@S3
% 4196 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER (TO BIG).@10CONNECTED TO: FIND LINE TABLE.@S3
% 4201 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER (TO SMALL).@10CONNECTED TO: FIND LINE TABLE.@S3
% 4206 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL CLUSTER NUMBER (TO BIG).@10CONNECTED TO: FIND CLUSTER TABLE.@S3
% 4211 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL CLUSTER NUMBER (TO SMALL).@10CONNECTED TO: FIND CLUSTER TABLE.@S3
% 4216 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL TERMINAL NUMBER.@10CONNECTED TO: FIND TERMINAL TABLE.@S3
% 4218 2 LHR: EVENT AT LOC: @H1. CAUSE: PACKET TO SHORT.@10CONNECTED TO: DATA FROM LTD/LTU.@S3
% 4219 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL OPCODE.@10CONNECTED TO: DATA FROM LTD/LTU.@S3
% 4221 2 LHR: EVENT AT LOC: @H1. CAUSE: TERMINAL (ADDR:@H2) NOT FOUND.@10CONNECTED TO: TEXT INPUT.@S2
% 4226 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER TABLE NOT FOUND.@10CONNECTED TO: FIND VARIOUS TABLES.(CAD = @H4)@S2
% 4231 2 LHR: EVENT AT LOC: @H1. CAUSE: LINE TABLE NOT FOUND.@10CONNECTED TO: FIND VARIOUS TABLES.@S3
% 4236 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: REMOVE CLUSTER.@S3
% 4241 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL DIAL-UP TRY.@10CONNECTED TO: DIAL UP CALL DETECTED.@S3
% 4246 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL OPCODE.@10CONNECTED TO: STATUS FROM LTD.@S3
% 4300 1 LHR: MODULE RESTARTED AT LOC: @H1. FATAL ERROR COUNT: @D2.@10DEGRATED MODE AND LOSS OF INFORMATION EXPECTED.@S2
% 4301 1 LHR: MODULE RESTART IMPOSSIBLE DUE TO ERROR TYPE OR COUNT.@10LOC: @H1. FATAL ERROR COUNT: @D2.@S2
% 4321 3 PACKET COUNT ON QUEUE @H1 - @H2: @D5 @D6 @D7 @D8  @D9 @D10 @D11 @D12   @D13 @D14 @D15 @D16  @D17 @D18 @D19 @D20@S2
$