DataMuseum.dkPresents historical artifacts from the history of: CR80 Hard and Floppy Disks |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about CR80 Hard and Floppy Disks Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 3938 (0xf62) Types: TextFile Names: »RELDESCR.T«
└─⟦e0c43619c⟧ Bits:30005797 CR80 Disc pack ( Vol:FNJ1 861029/EC CR80 S/W Package II+III+IV+V+VII ) └─ ⟦this⟧ »CSP005_V0501.D!CSS311.D!RELDESCR.T«
«ff» ******************************************************* R E L E A S E D E S C R I P T I O N ******************************************************* Module id number: CSS/311 -------------------------- Module name: TTY DRIVER ----------------------------------- Actual release: 11.04 Release date: 850517 ----------------------- -------------------- Previous release: 11.03 Release date: 850403 ----------------------- -------------------- New facilities: --------------- >>11.01<< 1101 FP/840810 Able to use a MIC. 1101 TLM/841101 The TTY driver now in MX systems awaits a signal during initialization, to avoid race for the console interface with ROOT. MX ROOT version 0202 sends this signal when it has finished system initialization. As a consequence of this, This TTY driver cannot be used in MX systems with older ROOT versions. The driver, itself, determines from the existance of a MIC, when the IV mod 64 = #3D, wheter to use MIC instructions, or MAP instructions. >>10.01<< Statistics gathering is noq included. Five 32-bits counters are updated: Number of write requests Number of read requests Number of abort requests Number of bytes written Number of bytes read >>09.01<< After being edited, the remainder of the line is outputted entirely. This produces the same screen image, as when the line was originally typed. (PR 739). A new mode has been introduced in this mode the driver will not echoe nor interpret any input character. This mode is entered (for one process), if exactly one character is output. and the value of this character is #80. The mode is left temporarily, when output from an- other process is processed or a Break-condition is encountered. In such cases, the next request from the process using the new mode, will be answered with a completion code of #680. The mode is left for good, when a Dismantle command is received from the process using the mode. (PR 895). If there are no (more) TAB stops defined, the cursor will not be moved. (PR 928). Changes: -------- >>11.04<< Part of readit, handling MIC is now executing disabled. >>09.01<< The device address (iv) must now be sent to the driver in the initialization message instead of device address times four. This change was necessary in order to be able to execute on the CR80-MX. Access to and through transfer lists are now performed by calls to the module CSS/357. This change was imple- mented in order to make it possible to use the same dri- ver for AMOS, XAMOS, and MX-AMOS. If the received device address equals #3D, the driver as- sumes that it has to use the serial interface of a CR80- MX step 1 MAP. Otherwise it automatically finds out whe- ther the interface is an AV/24 or an SCM. All reservation messages are now answered with the pro- gram page of the driver. Further, the linelength and the mode bits (echoe, vdu, await terminal ready, wait 200 ms after nl, and print FF) may be redefined. Errors corrected: ----------------- >>11.03<< Error in typeit on MX Type 2 corrected. Error in readit on (X)AMOS corrected. (PR no. 1262). >>11.02<< Error in conversion of MIC status into old fashioned V24 status corrected. >>10.01<< Initialization messages are now also treated when received during execution of other commands. Reported errors, not corrected: ------------------------------- CPECRs implemented in current release: -------------------------------------- >>11.03<< PR 1262 >>09.01<< 739, 895, 928 Comments: ---------