DataMuseum.dkPresents historical artifacts from the history of: CR80 Hard and Floppy Disks |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about CR80 Hard and Floppy Disks Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 18748 (0x493c) Types: TextFile Names: »EVENT_TEXTS«
└─⟦2590c0129⟧ Bits:30005148 8" CR80 Floppy CR80FD_0136 ( CRD3587 Id. CRD3587 Format AMOS Date 830127 Vol CRDB5002 XAMOS LTU TEST SYS LTU #14,...#19 + 1C (Spare) DRIVE 0 ) └─⟦07996eacd⟧ └─ ⟦this⟧ »EVENT_TEXTS«
% 10 1 EPROC : FATAL DISC ERROR , COMPLETION CODE = @H1 % 11 1 EPROC : EVENT LOG FILE IS FULL % 12 1 EPROC : EVENT LOG FILE ERROR, COMPLETION CODE = @H1 % 13 2 EPROC : Message with illegal data lenght = @D1 bytes received. % 14 2 EPROC : Message with illegal header lenght = @D1 bytes received. % 15 3 EPROC : CLOSE DOWN / EPROC INACTIVE. % 16 2 EPROC : Error in dismantling event log file during rename,CC= @H1. File not renamed. % 17 2 EPROC : Error in opening directory during rename of event log file, CC= @H1. File not renamed. % 18 2 EPROC : Not at NMS. Logfile does not exist. % 19 2 EPROC : Error in renaming of event log file, CC = @H1. % 20 1 EPROC : FAILURE IN REOPENING EVENT LOG FILE DURING RENAME, CC= @H1. % 21 3 EPROC : Event log file renamed to @A1,8. % 22 1 EPROC : ERROR IN CREATING NEW EVENT LOG FILE, CC = @H1. % 23 3 EPROC : New event log file created. % 102 2 FTP : File transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8 failed : I/O error CC = @H37 % 103 2 FTP : Message with illegal data lenght = @D1 bytes received. % 104 1 FTP : FATAL I/O ERROR, COMPLETION CODE = @H1. % 105 2 FTP : Timeout on slave transfer of @A1,8/@A9,2 to/from node @A11,8. % 106 2 FTP : Timeout on master transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8, last block = @D37. % 107 2 FTP : Message with illegal op_code = @H1 received. % 108 2 FTP : Message with excessive data lenght = @D1 bytes received. % 109 3 File transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8 stopped by user, last block transfered = @D37. % 110 3 File transfer from @A1,8/@A9,2@64@A11,8 to @A19,8/@A27,2@64@A29,8 successfully completed. % 111 2 FTP : Message with illegal transfer id = @D1 received, op_code = @D2. % 112 3 FTP: Slave transfer of @A1,8/@A9,2 to/from node @A11,8 closed by master. % 113 2 FTP : Sequence error in transfering file @A1,8/@A9,2@64,@A11,8 to @A19,7/@A27,2@64@A29,8, block number = @D37. % 114 2 FTP : Message with illegal header lenght = @D1 bytes received. % 120 2 FSP : Message with illegal header lenght = @D1 bytes received. % 121 2 FSP : Message with illegal data lenght = @D1 bytes received. % 122 2 FSP : Message with illegal op-code = @H1 received. % 150 2 SYSM: Illegal header:@10Opco= @H1 Type= @H2 Dnod= @H3 D.eu= @H4@10Onod= @H5 O.eu= @H6 Flag= @H7 Hopc= @H8 % 151 2 SYSM: Transport I/F, protocol error : @H1 % 152 8 SYSM : Node @D2 connected.@S5 % 153 8 SYSM : Node @D2 disconnected.@S5 % 154 7 SYSM : Time set to @D2-@D3-@D4 @D5:@D6.@S1 % 178 3 X25 : Line @D1 : Link up.@S3 % 179 3 X25 : Line @D1 : Link down.@S3 % 180 2 X25 : Line @D1 : Link error @D2.@S2 % 200 1 HSS : PARITY ERROR AT PAGE @D3 LOCATION @H2.@S1 % 201 1 HSS : ERROR IN CPU @D3.@S2 % 202 1 HSS : MEMORY TIMEOUT AT PAGE @D3 LOCATION @H2.@S1 % 300 1 BQM : LONG BUFFER POOL EXHAUSTED. % 301 3 BQM : Long buffer pool depleted to threshold 1 (output). % 302 3 BQM : Long buffer pool depleted to threshold 2 (throughput). % 303 3 BQM : Long buffer pool depleted to threshold 3 (input). % 310 1 BQM : SHORT BUFFER POOL EXHAUSTED. % 311 3 BQM : Short buffer pool depleted to threshold 1 (output). % 312 3 BQM : Short buffer pool depleted to threshold 2 (throughput). % 313 3 BQM : Short buffer pool depleted to threshold 3 (input). % 320 1 BQM : PDB POOL EXHAUSTED. % 321 3 BQM : PDB pool depleted to threshold 1 (output). % 322 3 BQM : PDB pool depleted to threshold 2 (throughput). % 323 3 BQM : PDB pool depleted to threshold 3 (input). % 400 2 XPORT : ERROR WITH CC= @H1 DETECTED IN @A2,2 AT LINE @D4. % 600 5 PRM: LTU BANK CONNECTED @S6 % 601 5 PRM: LTU BANK DISCONNECTED @S6 % 602 3 PRM: LTU @H1, GROUP/CRATE @H2, NOW REPLACED BY SPARE LTU @S4 % 603 2 PRM: LTU @H1, GROUP/CRATE @H2, BOOT PROM INOPERABLE @S4 % 604 2 PRM: LTU @H1, GROUP/CRATE @H2, CHECKSUM ERROR IN BOOT @S4 % 605 2 PRM: LTU @H1, GROUP/CRATE @H2, UNRECOGNICED ERROR @S4 % 606 2 PRM: LTU @H1, GROUP/CRATE @H2, TIMEOUT OCCURRED (REMOVED?) @S4 % 607 3 PRM: LTU @H1, GROUP/CRATE @H2, ADDRESSABLE (REINSERTED?) @S4 % 608 3 PRM: LTU @H1, GROUP/CRATE @H2, LIA DISCONNECTED @S4 % 609 2 PRM: LTU @H1, GROUP/CRATE @H2, ALIVE-COUNTER STOPPED @S4 % 610 1 PRM: LTU @H1, GROUP/CRATE @H2, ABANDONED. PLEASE REPAIR ! @S4 % 611 1 PRM: LTU @H1, GROUP/CRATE @H2, INCORRECT SLOT POSITION (FATAL) @S4 % 612 1 PRM: LTU @H1, GROUP/CRATE @H2, LIA FAIL ? (NO CONNECTION) @S4 % 613 2 PRM: LTU @H1, GROUP/CRATE @H2, BOOT TERMINATION FAILED @S4 % 614 3 PRM: SPARE LTU @H1, GROUP/CRATE @H2, NOW RELEASED @S4 % 615 3 @07 PRM TO OPERATOR: SWITCH 'IN' SPARE LTU, SLOT = @H2, GROUP/CRATE = @H1 @07 @S4 % 616 3 @07 PRM TO OPERATOR: SWITCH 'OUT' SPARE LTU, GROUP/CRATE = @H1 @07 @S5 % 620 2 PRM: IRRECOVERABLE FILE SYSTEM ERROR, LOC = @H1, CAUSE = @H2 @S4 % 621 1 PRM: ERROR ON FILE '@A7,8', COMPL. CODE = @H2 ( FATAL ) @S4 % 622 2 PRM: TIMEOUT ON ACCESS TO VOLUMEN '@A7,4', COMPL. CODE = @H2 ( FATAL ) @S4 % 623 1 PRM: ERROR ON BOOT FILE '@A7,8', INVALID CONTENT ( FATAL ) @S6 % 625 2 PRM: LTU @H1, GROUP/CRATE @H2, CR80 I/F QUE INACCESSABLE @S4 % 626 2 PRM: LTU @H1, GROUP/CRATE @H2, INVALID BUFFER ADDRESS ENCOUNTERED @S4 % 627 2 PRM: LTU @H1, GROUP/CRATE @H2, DOESN'T ACCEPT OPERATING MODE @S4 % 628 2 PRM: LTU @H1, GROUP/CRATE @H2, LINE STATUS GONE BAD @S4 % 629 2 PRM: LTU @H1, GROUP/CRATE @H2, CONFIGURATION FAILED @S4 % 630 1 PRM: IRRECOVERABLE S/W ERROR, LOC = @H1 , CAUSE = @H2 @S4 % 631 1 PRM: INVALID LTU CONFIGURATION, LTU DEVICE ADR. @H1 @S5 % 632 1 PRM: INVALID F/W CONFIG., LTU ADR. = @H1, PROTOCOL = @D1 @S4 % 640 3 PRM: ILLEGAL INPUT RECEIVED FROM END_USER @H1, OPCODE = @H2@S4 % 800 3 CTC PROCESS @H1 INITIALIZED @H2. % 801 3 CTC PROCESS @H1 STARTED SUCCESFULLY @H2. % 802 3 CTC PROCESS @H1 STOPPED SUCCESFULLY @H2. % 803 3 CTC PROCESS @H1 STATE: @H2; @H3; @H4; @H5; @H6; @H7; @H8; @H9. . % 804 3 INPUT ERROR TO PROCESS @H1. % 810 3 MFH @H1 STARTED SUCCESFULLY @H2 DUAL @H3,FEP1 ST @H4,FEP2 ST @H5. % 811 3 APPLICATION ERROR MAIN FRAME HANDLER @H1. % 812 3 FEP START MFH @H1,FEP @H2,SUCCESFULLY @H3. % 813 3 MFH @H1, FEP @H2 STOPPED. % 814 3 MFH @H1 , FEP'S SWITCHED ,STATE FEP_1 @H2 ,STATE FEP_2 @H3. % 815 3 MFH @H1, FEP @H2 DOWN. % 816 3 MFH @H1 ERROR ON CHANGE APPLICATION COMMAND. % 817 3 MFH :@H1 ERROR ON APPL REQUEST AA:@H2 CB:@H3 CC: @H4 BB: @H5 LOG TERM NO: <PAR_6>. % 818 3 ERROR ON APPLICATION CHANGE COMMAND LMFH @H1. % 819 3 SYSTEMSTATUS REPLY: LMFH: @H1, THIS FEP: @H2, OTHER FEP: @H3, THIS MF: @H4, AWWAY MF: @H5. % 820 3 DIAL UP DONE: @H1, ON LINE: @H2. % 821 3 BREAK OF DIAL UP DONE @H1. % 830 3 RESPONCE-TIME MEASUREMENT:. % 831 3 START @H1@H2 , STOP @H3@H4,. % 832 3 MESS LENGTH H5, TERM LOG. NO.H6,. % 833 3 RESONCE-TIME IN MSEK:. % 834 3 MIN: @H7@H8, AVR: @H9@H10, MAX: @H11@H12 . % 835 3 ERROR ON RTM ERR.CODE @H1. % 840 3 MFH@H1, NETWORK CLOSE DOWN ,REASON @H2. % 841 3 MFH @H1, CONFIG VER NO @H2@H3. % 842 3 MFH @H1, FEP MESSAGE ERR MT_H.CC @H2. % 843 2 FEP ERROR DETECTED : FEP_ID @H1, ERRORCODE = @H2, LOCATION = @H3. % 0900 1 MFD : IRRECOVERABLE SW ERROR, CC = @H3, LOC = @H2.@S1 % 950 1 TMR : IRRECOVERABLE SW ERROR, CC = @H3, LOC = @H2.@S1 % 1000 2 CTR: ILLEGAL TERMINAL NUMBER, LL= @D2, LOC=@H1 % 1001 2 CTR: ILLEGAL 'APPLICATION AVAILABLE' MESSAGE FROM MF @D2, LOC=@H1 % 1002 2 CTR: ILLEGAL 'APPLICATION DISABLE' MESSAGE FROM MF @D2, LOC=@H1 % 1003 2 CTR: SYNTAX ERROR IN 'LOGICAL TERMINAL ERROR' MESSAGE, LOC=@H1 % 1004 2 CTR: SYNTAX ERROR IN 'CONFIGURATION ERROR' MESSAGE FROM MF @D2, LOC=@H1 % 1005 2 CTR: LINK OPENED MSG AT INCORRECT TIME FROM MF @D2, LOC=@H1 % 1006 3 CTR: MAINFRAME UP FROM MF @D2, LOC=@H1 % 1007 2 CTR: READY TO GO AT INCORRECT TIME FROM MF @D2, LOC=@H1 % 1008 3 CTR: DATA FOR TERMINAL NOT IN SESSION, LL=@D2, LOC=@H1 % 1009 2 CTR: SYNTAX ERROR IN OUTPUT FOR REMOTE TERMINAL, LL=@D2, LOC=@H1 % 1010 1 CTR: ILLEGAL INPUT FROM LINEHANDLER, OPCODE IS @H2, LOC=@H1 % 1011 3 CTR: NO RESOURCES FOR NEW SESSIONS, LL=@D2, LOC=@H1 % 1012 2 CTR: ILLEGAL BRANCH NUMBER ON INPUT FROM TERMINAL @D2, CCC=@A3,4 LOC=@H1 % 1013 2 CTR: ILLEGAL REGION NUMBER IN INPUT, LOC=@H1 % 1014 2 CTR: APPLICATION ALREADY AVAILABLE, LOC=@H1 % 1015 2 CTR: ILLEGAL APPLICATION NAME IN INPUT FROM TERMINAL @2D2 LOC=@«bs»@H1 % 1016 3 CTR: NO PSEUDO ID'S AVAILABLE, LOC=@H1 % 1017 2 CTR: ILLEGAL SESSION IDENTIFICATION, LOC=@H1 % 1018 2 CTR: SESSION CONNECTION RECORD CANNOT BE FOUND, LOC=@H1 % 1019 1 CTR: ERROR IN RESPONSE FROM FSP, OPCODE @H2, COMPLETION CODE @H3, LOC=@H1 % 1020 1 CTR: ERROR IN LOGICAL CONF. FILE XFER, LOC=@H1 % 1021 1 CTR: ERROR IN PHYSICAL CONF. FILE XFER, LOC=@H1 % 1022 1 CTR: ERROR IN REGION/BRANCH TABLE XFER, LOC=@H1 % 1023 3 CTR: LOGICAL CONFIGURATION TRANSFER OK, LOC=@H1 % 1024 3 CTR: PHYSICAL CONFIGURATION TRANSFER OK, LOC=@H1 % 1025 3 CTR: REGION/BRANCH CONFIGURATION TRANSFER OK, LOC=@H1 % 1026 1 CTR: UNSOLICITED TIMER INPUT WITH OPCODE @H2, LOC=@H1 % 1027 1 CTR: UNSOLICITED FILE-SERVICE-PROCESS RESPONSE, OPCODE IS @H2, LOC=@H1 % 1028 1 CTR: I/O SYSTEM ERROR IN FSP RESPONSE, CC=@H2, LOC=@H1 % 1029 1 CTR: REGION/BRANCH TABLE TERMINATION RECORD ERROR, LOC=@H1 % 1030 1 CTR: UNSOLICITED INPUT FROM TRANSPORT MANAGER, OPCODE IS @H2, LOC=@H1 % 1031 1 CTR: UNSOLICITED INPUT FROM TRANSPORT SERVICE PROVIDER, OPCODE IS @H2, LOC=@H1 % 1032 1 CTR: CONNECT INDICATION SYNTAX ERROR, LOC=@H1 % 1033 1 CTR: OUTGOING ENDPOINT REFUSAL ERROR, LOC=@H1 % 1034 1 CTR: UNACCEPTABLE SERVICE GRADE PARAMETER IN CONNECT CONFIRM, LOC=@H1 % 1035 2 CTR: UNEXPECTED TRANSPORT CONNECTION DISCONNECT RECEIVED FROM NODE @D2, LOC=@H1 % 1036 1 CTR: ILLEGAL PIN NUMBER FROM TS, LOC=@H1 % 1038 2 CTR: MF INPUT SYNTAX ERROR, MF @D2, LOC=@H1 % 1039 2 CTR: SYNTAX ERROR IN PSEUDO ID RESERVATION MESSAGE, LOC=@H1 % 1040 3 CTR: MF @D2 IS DOWN, REASON @H3, LOC=@H1 % 1041 3 CTR: ILLEGAL TERMINAL INPUT: TRANSACTION CODE @A2,1 LOC=@H1 % 1042 1 CTR: BQM ERROR ENCOUNTERED IN LOC @H1, ERROR CODE=@H2 % 1043 1 CTR: GENERAL SOFTWARE DETECTED ERROR, CODE @H2, LOC=@H1 % 1044 3 CTR: ILLEGAL MF NUMBER ENCOUNTERED, LOC=@H1 % 1045 3 CTR: ILLEGAL APPLICATION NAME ENCOUNTERED, LOC=@H1 % 1046 2 CTR: FAILED TO CONNECT TO REMOTE NODE NUMBER @D2, LOC=@H1 % 1047 1 CTR: ILLEGAL PARAMETERS IN OE-ACCEPT, LOC=@H1 % 1048 3 CTR: CLOSE COMMAND RECEIVED BY CTR.@S6 % 1049 6 CTR: SYSTEM CLOSED DOWN.@S6 % 1050 2 CTR : ILLEGAL APPLICATION NAME RECEIVED FROM NODE @D1.@S5 % 1051 2 CTR : ILLEGAL TERMINAL NUMBER RECEIVED FROM NODE @D1.@S5 % 1100 10 SDM : Start update. @S6 % 1101 10 SDM : Stop update. @S6 % 1102 3 SDM : WD up. @S6 % 1103 2 SDM : WD down. @S6 % 1104 2 SDM : Send alive to WD failed. @S6 % 1105 2 SDM : LIA switch error: Crate no. @D1, Group no. @D2, Slot no. @H3.@S3 % 1106 2 SDM : WD F/W error. @S6 % 1107 1 SDM : LINK DOWN, STATUS = @H1.@S5 % 1108 3 SDM : LINK UP.@S6 % 1110 2 SDM : Loss of buffers on DTM link. @S6 % 1111 2 SDM : Rubbish from link. @S6 % 1112 2 SDM : Invalid buffer type on DTM link. @S6 % 1113 2 SDM : Rubbish input from LTU F/W. @S6 % 1114 1 SDM : ERROR IN DTL-LTU, ERROR CODE FROM LTU = @H1.@S5 % 1115 2 SDM : No answer from LTU. @S6 % 1116 2 SDM : Rubbish received from user. @S6 % 1117 2 SDM : Software error detected, program location @H1. @S5 % 1118 2 SDM : IO error, completion code = @H2, location @H1. @S4 % 1119 1 SDM : OTHER FEP IS DOWN.@S6 % 1200 3 STATS : Statistics collection stopped.@S11 % 1201 3 STATS : Statistics collection started.@S11 % 1202 3 STATS : Statistics collection continues.@S11 % 1203 1 STATS : STATISTICS COLLECTION TERMINATED.@S11 % 1210 3 STATS : Node @D3 : No response.@S10 % 1211 3 STATS : Node @D3 : Transfer in progress.@S10 % 1212 2 STATS : Node @D3 : Transfer time-out.@S10 % 1213 3 STATS : Node @D3 : Transfer suspended.@S10 % 1214 3 STATS : Node @D3 : Transfer completed.@S10 % 1215 2 STATS : Node @D3 : TRANSFER ERROR.@S10 % 1230 1 STATS : INTERVENTION REQUIRED, FULL CAPACITY REACHED ON FILE @A4,8.@S3 % 1231 1 STATS : WARNING MESSAGE : 90@37 CAPACITY REACHED ON @A4,8.@S3 % 1232 2 STATS : Warning message : 80@37 capacity reached on @A4,8.@S3 % 1233 3 STATS : Warning message : 70@37 capacity reached on @A4,8.@S3 % 1250 1 STATS : INTERVENTION REQUIRED, FILE @A4,8 CANNOT BE CREATED ( CC= @H2 ).@S2 % 1251 1 STATS : INTERVENTION REQUIRED, FILE @A4,8 CANNOT BE OPENED (CC= @H2).@S2 % 1252 1 STATS : INTERVENTION REQUIRED, FILE @A4,8 CANNOT BE ACCESSED (CC= @H2).@S2 % 1299 1 STATS : S/W TERMINAL STATE : @H1 @H2 @H3 @H4 @H5 @H6 @H7 @H8 @H9 @H10 @H11. % 1300 1 OLD : BQM ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3 % 1301 1 OLD : REGION ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3 % 1302 1 OLD : ERM ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3 % 1303 1 OLD : PTI ERROR IN MODULE @D1, LOCATION @H2, COMPLETION CODE @H3.@S3 % 1304 1 OLD : SOFTWARE ERROR IN MODULE @D1, LOCATION @H2,COMPLETION CODE @H3.@S3 % 4000 3 LINEHANDLER EVENT CODE: @D2 AT LOCATION: @H1. SEE MANUAL.@S2 % 4001 3 LHR: LINE @D1 UP.@S3 % 4002 3 LHR: LINE @D1 DOWN.@S3 % 4003 3 LHR: CONTROLLER @D2 ON LINE @D1 UP.@S2 % 4004 3 LHR: CONTROLLER @D2 ON LINE @D1 DOWN.@S2 % 4005 3 LHR: TERMINAL @D3 ON CONTROLLER @D2 ON LINE @D1 UP.@S1 % 4006 3 LHR: TERMINAL @D3 ON CONTROLLER @D2 ON LINE @D1 DOWN.@S1 % 4007 3 LHR: CONTROLLER @D2 ON LINE @D1 REMOVED FOR LTU-SWITCH.@S2 % 4008 3 LHR: TERMINAL @D3 ON CONTROLLER @D2 ON LINE @D1 MOVED.@S1 % 4009 3 LHR: ????? @H1 @H2 @H3 @H4 % 4010 3 LHR: ????? @H1 @H2 @H3 @H4 % 4011 3 LHR: ????? @H1 @H2 @H3 % 4012 3 LHR: ????? @H1 @H2 % 4013 3 LHR: ????? @H1 % 4014 3 LHR: LINE-FALURE ON LINE @D1 CAUSED BY LTU-EVENT ON LTU @H2.@S2 % 4015 3 LHR: CURRENT THRESHOLD ON LINE @D1 (@D4 ERRORS / @D3@48 SECONDS) EXEEDED: @D2 ERRORS IN LAST PERIOD. % 4020 1 LHR: IRRECOVERABLE ERROR AT LOC: @H1 (INFORM. FOR PROGRAMMER:@H2,@H3,@H4) % 4021 1 LHR: RECOVERABLE ERROR AT LOC: @H1 (INFORM. FOR PROGRAMMER:@H2,@H3,@H4) % 4030 3 LHR: LINE @D1 UP ACCEPTED.@S3 % 4031 3 LHR: LINE @D1 DOWN ACCEPTED.@S3 % 4032 3 LHR: CLUSTER @D1 UP ACCEPTED.@S3 % 4033 3 LHR: CLUSTER @D1 DOWN ACCEPTED.@S3 % 4034 3 LHR: LINE-SPEED CHANGE ON LINE @D1 TO @H2 ACCEPTED.@S2 % 4035 3 LHR: LINE-THRESHOLD CHANGE ON LINE @D1 TO: SAMPLETIME = @D2 SECONDS, THRESHOLD = @D3 ACCEPTED.@S1 % 4036 3 LHR: TERMINAL SWITCH BETWEEN TERMINAL @D1 AND TERMINAL @D2 ACCEPTED.@S2 % 4037 3 LHR: BLOCSIZE CHANGE ON LINE @D1 TO @D2 ACCEPTED.@S2 % 4038 3 LHR: @H1 @H2 @H3 @H4 % 4039 3 LHR: @H1 @H2 @H3 @H4 % 4040 3 LHR: LINE @D1 UP REJECTED.@S3 % 4041 3 LHR: LINE @D1 DOWN REJECTED.@S3 % 4042 3 LHR: CLUSTER @D1 UP REJECTED.@S3 % 4043 3 LHR: CLUSTER @D1 DOWN REJECTED.@S3 % 4044 3 LHR: LINE-SPEED CHANGE ON LINE @D1 TO @H2 REJECTED.@S2 % 4045 3 LHR: LINE-THRESHOLD CHANGE ON LINE @D1 TO: SAMPLETIME = @D2 SECONDS, THRESHOLD = @D3 REJECTED.@S1 % 4046 3 LHR: TERMINAL SWITCH BETWEEN TERMINAL @D1 AND TERMINAL @D2 REJECTED.@S2 % 4047 3 LHR: BLOCSIZE CHANGE ON LINE @D1 TO @D2 REJECTED.@S2 % 4048 3 LHR: @H1 @H2 @H3 @H4 % 4049 3 LHR: @H1 @H2 @H3 @H4 % 4050 3 LHR: ILLEGAL OPERATION CODE IN WORKING MODE: "@H4" REJECTED.@S3 % 4051 3 LHR: ILLEGAL OPERATION CODE IN STAND BY MODE: "@H4" REJECTED.@S3 % 4099 2 LHR: EVENT AT LOC: @H1. CAUSE: COMPLETION CODE = @H3 FROM FSTP.@10CONNECTED TO: GET CONFIGURATION FILE @H4.@S1 % 4101 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: LINE @D2 UP.@S2 % 4106 3 LHR: EVENT AT LOC: @H1. CAUSE: LINE ALREADY UP.@10CONNECTED TO: LINE @D2 UP.@S2 % 4111 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: LINE @D2 DOWN.@S2 % 4116 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: REMOVE CLUSTER.@S3 % 4121 2 LHR: EVENT AT LOC: @H1. CAUSE: TERMINAL NOT ASSIGNED.@10CONNECTED TO: REMOVE TERMINAL.@S3 % 4126 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: POLL COMMAND.@S3 % 4131 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER ALREADY ASSIGNED.@10CONNECTED TO: ASSIGN CLUSTER.@S3 % 4136 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: ASSIGN TERMINAL.@S3 % 4141 2 LHR: EVENT AT LOC: @H1. CAUSE: TERMINAL NOT ASSIGNED.@10CONNECTED TO: REMOVE TERMINAL.@S3 % 4146 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: REMOVE TERMINAL.@S3 % 4151 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL OPCODE.@10CONNECTED TO: STANDBY MODE.@S3 % 4156 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER.@10CONNECTED TO: LINE THRESHOLD STATISTICS INFO.@S3 % 4161 2 LHR: EVENT AT LOC: @H1. CAUSE: 1'ST TERMINAL NOT ASSIGNED.@10CONNECTED TO: TERMINAL SWITCH.@S3 % 4166 2 LHR: EVENT AT LOC: @H1. CAUSE: 2'ND TERMINAL NOT ASSIGNED.@10CONNECTED TO: TERMINAL SWITCH.@S3 % 4171 2 LHR: EVENT AT LOC: @H1. CAUSE: NO PREVEUS CLUSTER DOWN.@10CONNECTED TO: CLUSTER UP.@S3 % 4176 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: CLUSTER UP.@S3 % 4181 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER ALREADY COMMANDED DOWN.@10CONNECTED TO: CLUSTER DOWN.@S3 % 4186 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: CLUSTER DOWN.@S3 % 4188 1 LHR: ERROR AT LOC: @H1. CAUSE: INCONSISTENT MESSAGE FROM PRM.@10CONNECTED TO: NEW DEVICE (LTU).@S3 % 4189 1 LHR: DEVICE TABLES CORRUPTED DEGRADET MODE SELECTED.@10NEW LTU: @H2, OLD LTU: @H3, PROTOCOL: @H4 COULD NOT BE SOLVED.@S1 % 4191 2 LHR: EVENT AT LOC: @H1. CAUSE: DEVICE TABLE NOT FOUND.@10CONNECTED TO: FIND DEVICE TABLE.@S3 % 4196 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER (TO BIG).@10CONNECTED TO: FIND LINE TABLE.@S3 % 4201 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL LINE NUMBER (TO SMALL).@10CONNECTED TO: FIND LINE TABLE.@S3 % 4106 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL CLUSTER NUMBER (TO BIG).@10CONNECTED TO: FIND CLUSTER TABLE.@S3 % 4211 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL CLUSTER NUMBER (TO SMALL).@10CONNECTED TO: FIND CLUSTER TABLE.@S3 % 4216 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL TERMINAL NUMBER.@10CONNECTED TO: FIND TERMINAL TABLE.@S3 % 4218 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL OPCODE.@10CONNECTED TO: DATA FROM LTD/LTU.@S3 % 4221 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL TERMINAL NUMBER.@10CONNECTED TO: TEXT INPUT.@S3 % 4226 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER TABLE NOT FOUND.@10CONNECTED TO: FIND VARIOUS TABLES.(CAD = @H4)@S2 % 4231 2 LHR: EVENT AT LOC: @H1. CAUSE: LINE TABLE NOT FOUND.@10CONNECTED TO: FIND VARIOUS TABLES.@S3 % 4236 2 LHR: EVENT AT LOC: @H1. CAUSE: CLUSTER NOT ASSIGNED.@10CONNECTED TO: REMOVE CLUSTER.@S3 % 4241 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL DIAL-UP TRY.@10CONNECTED TO: DIAL UP CALL DETECTED.@S3 % 4246 2 LHR: EVENT AT LOC: @H1. CAUSE: ILLEGAL OPCODE.@10CONNECTED TO: STATUS FROM LTD.@S3 % 4300 1 LHR: MODULE RESTARTET AT LOC: @H1. FATAL ERROR COUNT: @D2.@10DEGRATED MODE AND LOSS OF INFORMATION EXPECTED.@S2 % 4301 1 LHR: MODULE RESTARTIMPOSSIBLE DUE TO ERROR TYPE OR COUNT.@10LOC: @H1. FATAL ERROR COUNT: @D2.@S2 % 4321 3 PACKET COUNT ON QUEUE @H1 - @H2: @D5 @D6 @D7 @D8 @D9 @D10 @D11 @D12 @D13 @D14 @D15 @D16 @D17 @D18 @D19 @D20@S2 $ «a5»