top - download
⟦10a705006⟧ Wang Wps File
Length: 18098 (0x46b2)
Types: Wang Wps File
Notes: CPS/TPR/042
Names: »4341A «
Derivation
└─⟦fa2167417⟧ Bits:30006184 8" Wang WCS floppy, CR 0396A
└─ ⟦this⟧ »4341A «
WangText
…13……00……00……00……00…5…02……00……00…5
4…0b…4…0f…4 3…0a……86…1 …02… …02… …02…
…02…CPS/TPR/042
…02…CSV/831122…02……02…
FACTORY ACCEPTANCE TEST SPECIFICATION AND
PROCEDURE SITE 5A, 14A, AND SITE 15 PRINTERS…02……02…CAMPS
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
1 GENERAL .......................................
1
1.1 PURPOSE ....................................
1
1.2 APPLICABLE DOCUMENTS .......................
1
1.3 INSPECTION AND TEST PROCEDURES .............
1
2 TEST SPECIFICATION AND EVALUATION ..............
2
2.1 TEST SPECIFICATION .........................
2
2.1.1 Test Purpose ...........................
2
2.2 TEST METHODS AND CONSTRAINTS ...............
2
2.2.1 Test Conditions ........................
2
2.2.2 Data Recording .........................
3
2.2.3 System Test Constraints ................
3
2.2.4 Test Location ..........................
3
2.3 TEST EVALUATION ............................
3
3 TEST DESCRIPTION AND PROCEDURES ................
4
3.1 Testgroup No. 1 ............................
4
3.1.1 General Description ....................
4
3.1.2 Test Procedure .........................
4
3.1.2.1 Test Initialization ................
4
3.1.2.2 Test Steps .........................
4
3.2 TESTGROUP NO. 2 ............................
7
3.2.1 General Description ....................
7
3.2.2 Test Procedure .........................
7
3.2.2.1 General Description ................
7
3.2.2.1.1 Test Set Up ....................
7
3.2.2.1.2 Test Initialization ............
8
3.2.2.1.3 Test Steps .....................
8
3.2.3.1.4 Test Termination ...............
14
Appendix A .....................................
Appendix B .....................................
Appendix C .....................................
1̲ ̲ ̲G̲E̲N̲E̲R̲A̲L̲
1.1 P̲U̲R̲P̲O̲S̲E̲
The purpose of this document is:
a) to identify:
1) the test object
2) the requirements to be verified
b) to define:
1) the test methods and constraints
2) the test evaluation criteria
3) the detailed procedure for test execution
1.2 A̲P̲P̲L̲I̲C̲A̲B̲L̲E̲ ̲D̲O̲C̲U̲M̲E̲N̲T̲S̲
The following documents are applicable to the extent
specified herein:
a) CAMPS System Requirements Specification,
CPS/210/SYS/0001
b) CAMPS Acceptance Test Specification Overview,
CPS/TSS/001
c) CAMPS Hardware Assembly Breakdown/Hardware Tree
CPS/SDS/017, Issue 3
d) CAMPS System Design Specification
CPS/SDS/001
e) Additional configuration list for site 5A spare
Eq., 14A Spare Eq. and Site 15
f) Factory Acceptance Test Specificaton and Procedures,
Site 10.
1.3 I̲N̲S̲P̲E̲C̲T̲I̲O̲N̲ ̲A̲N̲D̲ ̲T̲E̲S̲T̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲S̲
1) Inspection and Test Procedure for Tracor MSP Model
8000, CPS/TPR/019 (1) 820225.
2̲ ̲ ̲T̲E̲S̲T̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲A̲N̲D̲ ̲E̲V̲A̲L̲U̲A̲T̲I̲O̲N̲
2.1 T̲E̲S̲T̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲A̲T̲I̲O̲N̲
2.1.1 T̲e̲s̲t̲ ̲P̲u̲r̲p̲o̲s̲e̲
The purpose of this test is to provide a Factory Acceptance
on Tracor Printers for site 5A, 14A, and site 15. These
sites are Factory Accepted without or with too few
printers. The test is carried out by use of CAMPS site
10 system.
2.2 T̲E̲S̲T̲ ̲M̲E̲T̲H̲O̲D̲S̲ ̲A̲N̲D̲ ̲C̲O̲N̲S̲T̲R̲A̲I̲N̲T̲S̲
2.2.1 T̲e̲s̲t̲ ̲C̲o̲n̲d̲i̲t̲i̲o̲n̲s̲
This test is a hardware qualification test, and the
verification methods to be applied will consist of:
- examination
- analysis
- demonstration/test
a) Examination
This method is a non-functional verification such
as visual inspection of the physical characteristics
of the item or of the documentation associated
with the item.
b) Analysis
This method is a non-functional verification, such
as reductions or translation of data, review of
analytical data, or review of performances from
a detailed test. Data may be brought forward from
previous tests.
c) Test/Demonstration
This method of testing is to functionally exercise
the equipment such that measurements and observations
of correct operation can be made. Elements not
directly measured or observed are demonstrated
by implication.
2.2.2 D̲a̲t̲a̲ ̲R̲e̲c̲o̲r̲d̲i̲n̲g̲
All test results or indication of compliance with expected
results shall be recorded in a report by CR's test
engineer in charge of test execution.
Test executions must be witnessed by CR's QA and the
purchaser's QAR.
The Test Report shall be signed by CR's test engineer
and the test witnesses.
The original test reference copy will be filed by CR
QA.
2.2.3 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲s̲t̲r̲a̲i̲n̲t̲s̲
The basic functional capabilities of the hardware and
the related system firmware will be verified.
Requirements specifying CAMPS functions provided by
both software, application firmware, and hardware will
be verified during the functional software test.
2.2.4 T̲e̲s̲t̲ ̲L̲o̲c̲a̲t̲i̲o̲n̲
When the CAMPS hardware has been integrated at the
factory, a functional test will be performed. The
location for execution of the test is a CR decision.
2.3 T̲E̲S̲T̲ ̲E̲V̲A̲L̲U̲A̲T̲I̲O̲N̲
Evaluation of the test results will be performed by
comparison of test results with expected results or
by assurance of compliance between requirements and
the referenced documentation.
3̲ ̲T̲E̲S̲T̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲ ̲A̲N̲D̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲S̲
3.1 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲1̲
3.1.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the site
configuration.
3.1.2 T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲
3.1.2.1 T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲
The testengineers and testwitnesses are in the testroom
and ready to perform and supervise the test.
3.1.2.2 T̲e̲s̲t̲ ̲S̲t̲e̲p̲s̲
The teststeps for testgroup no. 1 are given in the
following, with an overview description and the teststeps
to follow.
T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲ T̲E̲S̲T̲ ̲N̲O̲.̲ ̲1̲ ̲ ̲ ̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲S̲i̲t̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Test Case Action SRS Refence
R̲e̲f̲e̲r̲e̲n̲c̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1 Verification of the site N/A
Configuration
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲ T̲E̲S̲T̲
̲N̲O̲.̲
̲1̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲S̲i̲t̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
S̲P̲S̲ ̲R̲e̲f̲e̲r̲e̲n̲c̲e̲:̲ ̲ ̲N̲/̲A̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Case. Test Action Expected Results
Step no. Station
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.1 Verify, for the actual
equipment to be tested, that
the configuration is in
accordance with that
specified in document C and
E. Use the checklist in
Appendix C, for result
recordings.
Verification
OK
Check Document E to ensure
that all applicable ECOs
have been implemented.
For each connected periphe-
ral check the associated
Certificate Of Conformance
(COC) to verify that each
connected peripheral has
been certified. Verification
OK
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:
T̲E̲S̲T̲
̲W̲I̲T̲N̲E̲S̲S̲E̲S̲
TEST
QA
QAR
3.2 T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲2̲
3.2.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
The purpose of this test group is to verify basic functional
capabilities of the CAMPS MSP.
The test will be performed for four MSPs at a time,
by sending 24 lines of alphanumeric characters to the
MSPs connected. Verification of the transmitted data
are performed by visual inspection of the printout.
To ease identification of terminals connected to the
TDX system via signal adapters and LTUX-Ss, each terminal
and the link between the terminal and the signal adapter
is given a three digit identifier. Each digit is a
hexadecimal number. The format of the identifier is
…08…XYZ…08… and the terminal having this identification is
connected via link (opto or V24) XYZ to channel Z (1-4)
of LTUX-S X (1-2) in TDX Unit (TU) Y (1-E). E.g.: a
MSP has the identifier 2A3 that the MSP is connected
via link 2A3 to channel 3 of LTUX-S no. 2 in TDX Unit
10.
3.2.2 T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲
3.2.2.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testprocedure serves to verify functional capabilities
of the MSPs.
3.2.2.1.1 T̲e̲s̲t̲ ̲S̲e̲t̲ ̲U̲p̲
Ref: Factory Acceptance Test Specification and Procedures,
Site 10.
3.2.2.1.2 T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲
The test engineers and testwitnesses are in the testroom
and ready to perform and supervise the test.
Power up the system as follows:
a) Power up the connected MSPs
b) Power up the site 10 system, ref. document f.
3.2.2.1.3 T̲e̲s̲t̲ ̲S̲t̲e̲p̲s̲
The teststeps for testgroup no. 2 are given in the
following preceded by a testoverview.
T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲ T̲E̲S̲T̲ ̲N̲O̲.̲ ̲1̲ ̲ ̲ ̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲S̲i̲t̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Test Case Action SRS Refence
R̲e̲f̲e̲r̲e̲n̲c̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1 LTUX-S Link 13X N/A
2 LTUX-S Link 23X N/A
3 LTUX-S Link 15X N/A
4 LTUX-S Link 25X N/A
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲ T̲E̲S̲T̲
̲N̲O̲.̲:̲
̲2̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲
S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Case Test
Step No. Station Action Expected Results
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.1 OC Examine printout on OC OC print out
as specified
in Appendix B,
Sec. 1.1
1.2 OC Boot the TDX1 test OC print out
as spe-
programs as follows: cified in appendix
B,
section 1.2
BA 1025 (CR)
BM 140 (CR)
BO 62F (CR)
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲
TEST QA QAR
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲ T̲E̲S̲T̲
̲N̲O̲.̲:̲
̲2̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲
S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Case Test
Step No. Station Action Expected Results
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.3 OC Activate the link 13x
LTUX-S test as fol-
lows:
Enter from the OC: MSP 13X print
out as
DO OPEN13(CR) Specified in
appendix
(Appendix A, sec. 2.2a) B, sec. 2
DO MSP(CR)
(Appendix A, sec. 2.1) OC print out
as
DO CLOSE13(CR) specified in
Appen-
(Appendix A, sec. 2.2b) dix B, sec. 1.3
1.4 OC Activate the link 23x
LTUX-S test as fol-
lows:
Enter from the OC: MSP 23x print
out
DO OPEN23(CR) as specified
in appen-
(Appendix A, sec. 2.3a) dix B, Section
2
DO MSP(CR)
(Appendix A, sec. 2.1) OC print out
as
DO CLOSE23(CR) specified in
Appen-
(Appendix A, sec. 2.3b) dix B, sec. 1.4
1.5 OC Quit the test program by OC print out
as spe-
entering from the OC: cified in appendix
B,
QUIT (CR) sec. 1.5
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲
T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲
TEST QA QAR
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲ T̲E̲S̲T̲
̲N̲O̲.̲:̲
̲2̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲
S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Case Test
Step No. Station Action Expected Results
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.6 OC Boot the TDX2 test
program as follows:
BA 1025 (CR)
BM 140 (CR) Refer to Appendix
B
BO 630 (CR) sec. 1.6
1.7 OC Activate the link 15x
LTUX-S test as fol-
lows:
Enter from the OC: MSP 15X print
out
DO OPEN15(CR) as specified
in ap-
(Appendix A, sec.2.4a) pendix B, sec.
2
DO MSP (CR)
(Appendix A, sec.2.1) OC print out
as
DO CLOSE15(CR) specified in
appen-
(Appendix A, sec.2.4b) dix B sec. 1.7
1.8 OC Activate the link 25x
LTUX-S test as fol-
lows:
Enter from the OC: MSP 25X print
out
DO OPEN25(CR) as specified
in ap-
(Appendix A, sec. 2.5a) pendix B, sec.
2
DO MSP (CR)
(Appendix A, sec. 2.1) OC print out
as
DO CLOSE25(CR) specified in
appen-
(Appendix A, sec. 2.5) dix B sec. 1.8
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲
T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲
TEST QA QAR
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲ T̲E̲S̲T̲
̲N̲O̲.̲:̲
̲2̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲
S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Case Test
Step No. Station Action Expected Results
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.9 OC Quit the test program by OC print out
as spe-
entering from the OC: cified in appendix
B,
QUIT (CR) sec. 1.9
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲
T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲
TEST QA QAR
3.2.3.1.4 T̲e̲s̲t̲ ̲T̲e̲r̲m̲i̲n̲a̲t̲i̲o̲n̲
Power down the system as follows:
a) Power down the connected MSPs
b) Power down the site 10 system, ref. document f.
A P P E N D I X A
********************************
1̲ ̲G̲E̲N̲E̲R̲A̲L̲
During the Factory Acceptance test a number of inputcommands
of the type:
DO (BODY)
are used.
This commandtype is used to activate a testsequence resident
in main memory, i.e the actual testprogram now accepts testcommands
from this testsequence and not from the OC. When the activated
testsequence has finished, commandinputs are again taken from
the OC. Testsequences used in the testprocedures are explained
in the following.
2̲ ̲ ̲L̲T̲U̲X̲-̲S̲ ̲T̲E̲S̲T̲ ̲S̲E̲Q̲U̲E̲N̲C̲E̲S̲,̲ ̲V̲D̲U̲,̲ ̲M̲S̲P̲
These test sequences consist of a common test sequence
(common to all link tests) and for each link to be
tested two specific link sequences.
2.1 M̲S̲P̲ ̲C̲O̲M̲M̲O̲N̲ ̲T̲E̲S̲T̲S̲E̲Q̲U̲E̲N̲C̲E̲,̲ ̲D̲O̲ ̲M̲S̲P̲
DEFINE (1,'(:13:)(:10:)THE QUICK BROWN FOX JUMPS OVER
THE LAZY DOGS BACK 0123456789')
DEFINE(2,#481B #000D)
GENERATE(1,1,31)
GENERATE(2,2,2)
REPEAT 60
BEGIN
TDX.WRITE(1,1,62)
TDX.WRITE(2,1,62)
TDX.WRITE(3,1,62)
TDX.WRITE(4,1,62)
END
TDX.WRITE(1,2,3)
TDX.WRITE(2,2,3)
TDX.WRITE(3,2,3)
TDX.WRITE(4,2,3)
2.2 L̲I̲N̲K̲ ̲1̲3̲X̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲ ̲T̲E̲S̲T̲ ̲S̲E̲Q̲U̲E̲N̲C̲E̲S̲
a) O̲p̲e̲n̲,̲ ̲D̲O̲ ̲O̲P̲E̲N̲1̲3̲
TDX.INITIALIZE(#32,1)
TDX.OPEN ̲BUS(#32,0)
TDX.OPEN ̲SUBDEVICE(#32,0,#13,8)
TDX.OPEN ̲VDU(#32,0,#13,2,8,1)
TDX.OPEN ̲VDU(#32,0,#13,3,8,2)
TDX.OPEN ̲VDU(#32,0,#13,4,8,3)
TDX.OPEN ̲VDU(#32,0,#13,5,8,4)
b) C̲l̲o̲s̲e̲,̲ ̲D̲O̲ ̲C̲L̲O̲S̲E̲1̲3̲
TDX.CLOSE ̲VDU(1)
TDX.CLOSE ̲VDU(2)
TDX.CLOSE ̲VDU(3)
TDX.CLOSE ̲VDU(4)
TDX.CLOSE ̲SUBDEVICE(#32,0,#13)
TDX.CLOSE ̲BUS(#32,0)
TDX.SHUTDOWN(#32)
2.3 L̲I̲N̲K̲ ̲2̲3̲X̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲ ̲T̲E̲S̲T̲ ̲S̲E̲Q̲U̲E̲N̲C̲E̲S̲
a) O̲p̲e̲n̲,̲ ̲D̲O̲ ̲O̲P̲E̲N̲2̲3̲
TDX.INITIALIZE(#32,1)
TDX.OPEN ̲BUS(#32,0)
TDX.OPEN ̲SUBDEVICE(#32,0,#23,8)
TDX.OPEN ̲VDU(#32,0,#23,2,8,1)
TDX.OPEN ̲VDU(#32,0,#23,3,8,2)
TDX.OPEN ̲VDU(#32,0,#23,4,8,3)
TDX.OPEN ̲VDU(#32,0,#23,5,8,4)
b) C̲l̲o̲s̲e̲,̲ ̲D̲O̲ ̲C̲L̲O̲S̲E̲2̲3̲
TDX.CLOSE ̲VDU(1)
TDX.CLOSE ̲VDU(2)
TDX.CLOSE ̲VDU(3)
TDX.CLOSE ̲VDU(4)
TDX.CLOSE ̲SUBDEVICE(#32,0,#23)
TDX.CLOSE ̲BUS(#32,0)
TDX.SHUTDOWN(#32)
2.4 L̲I̲N̲K̲ ̲1̲5̲X̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲ ̲T̲E̲S̲T̲ ̲S̲E̲Q̲U̲E̲N̲C̲E̲S̲
a) O̲p̲e̲n̲,̲ ̲D̲O̲ ̲O̲P̲E̲N̲1̲5̲
TDX.INITIALIZE(#32,1)
TDX.OPEN ̲BUS(#32,0)
TDX.OPEN ̲SUBDEVICE(#32,0,#15,8)
TDX.OPEN ̲VDU(#32,0,#15,2,8,1)
TDX.OPEN ̲VDU(#32,0,#15,3,8,2)
TDX.OPEN ̲VDU(#32,0,#15,4,8,3)
TDX.OPEN ̲VDU(#32,0,#15,5,8,4)
b) C̲l̲o̲s̲e̲,̲ ̲D̲O̲ ̲C̲L̲O̲S̲E̲1̲5̲
TDX.CLOSE ̲VDU(1)
TDX.CLOSE ̲VDU(2)
TDX.CLOSE ̲VDU(3)
TDX.CLOSE ̲VDU(4)
TDX.CLOSE ̲SUBDEVICE(#32,0,#15)
TDX.CLOSE ̲BUS(#32,0)
TDX.SHUTDOWN(#32)
2.5 L̲I̲N̲K̲ ̲2̲5̲X̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲ ̲T̲E̲S̲T̲ ̲S̲E̲Q̲U̲E̲N̲C̲E̲S̲
a) O̲p̲e̲n̲,̲ ̲D̲O̲ ̲O̲P̲E̲N̲2̲5̲
TDX.INITIALIZE(#32,1)
TDX.OPEN ̲BUS(#32,0)
TDX.OPEN ̲SUBDEVICE(#32,0,#25,8)
TDX.OPEN ̲VDU(#32,0,#25,2,8,1)
TDX.OPEN ̲VDU(#32,0,#25,3,8,2)
TDX.OPEN ̲VDU(#32,0,#25,4,8,3)
TDX.OPEN ̲VDU(#32,0,#25,5,8,4)
b) C̲l̲o̲s̲e̲,̲ ̲D̲O̲ ̲C̲L̲O̲S̲E̲2̲5̲
TDX.CLOSE ̲VDU(1)
TDX.CLOSE ̲VDU(2)
TDX.CLOSE ̲VDU(3)
TDX.CLOSE ̲VDU(4)
TDX.CLOSE ̲SUBDEVICE(#32,0,#25)
TDX.CLOSE ̲BUS(#32,0)
TDX.SHUTDOWN(#32)
A P P E N D I X B…01…********************************
A P P E N D I X C…01…********************************
1.1 G̲E̲N̲E̲R̲A̲L̲
Check list used for Verification of the Configuration.
In the check list the specified quantity for each item
is tabulated. Further, a inspected quantity column,
to be used for result recording, exists to ensure the
compliance between the specified and inspected configuration.
MEDIUM SPEED PRINTER SPEC. INSPEC COMPLIANCE
QTY QTY
MSP SITE 15 8
MSP SITE 15A 2
MSP SITE 15B 2
MSP SITE 15A Spare 1
MSP SITE 15B Spare 1
MSP SITE 5A Spare 1
MSP SITE 14A Spare 1
