top - download
⟦1147a3ce2⟧ Wang Wps File
Length: 7770 (0x1e5a)
Types: Wang Wps File
Notes: CPS/TCN/030
Names: »1268A «
Derivation
└─⟦2a70d8cf1⟧ Bits:30006046 8" Wang WCS floppy, CR 0073A
└─ ⟦this⟧ »1268A «
WangText
…02…CPS/TCN/030
…02…JRD/810916…02……02…#
DSMT H/W TEST REQUIREMENT SPECIFICATION
…02……02…CAMPS
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
1 SCOPE .........................................
4
2 APPLICABLE DOCUMENTS ..........................
4
3 MANUFACTURING REQUIREMENTS ....................
5
3.1 MANUFACTURING PROCESSES AND PRACTICES
REQUIREMENTS ..............................
5
3.2 PARTS AND COMPONENTS REQUIREMENTS .........
6
3.3 DESIGN AND CONSTRUCTION CRITERIA
REQUIREMENTS ..............................
6
3.4 ENVIRONMENTAL RESISTANCE ..................
8
4 FUNCTIONAL DESIGN CHARACTERISTICS .............
9
4.1 HARDWARE FUNCTIONAL REQUIREMENTS ..........
9
4.2 EXTERNAL INTERFACE CHARACTERISTICS ........
9
4.3 SPECIFIC EQUIPMENT CHARACTERISTICS ........
10
4.4 SECURITY RELATED SYSTEM DESIGN REQUIREMENTS
11
1̲ ̲ ̲S̲C̲O̲P̲E̲
This document is written to give an overall outline
of the requirements applicable for the DSMT hardware
test (line item 5.3.1) as extracted from the "CAMPS
System Requirement Specification).
References to this document as well as to the appropriate
standards are made.
2̲ ̲ ̲A̲P̲P̲L̲I̲C̲A̲B̲L̲E̲ ̲D̲O̲C̲U̲M̲E̲N̲T̲S̲
CAMPS System Requirement Specification
CPS/210/SYS/0001
CAMPS System Design Specification
CPS/SDS/001
NGTS40 Ammended as Applicable for CR80 Hardware 801222
General Manufacturing Requirements
ED/STD/0002 (NGTS 45)
Design and Construction Criteria for Electronic Material
ED/STD/0003 (NGTS 50)
Configuration Item Identification Standard
SD/STD/001
3̲ ̲ ̲M̲A̲N̲U̲F̲A̲C̲T̲U̲R̲I̲N̲G̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲S̲
3.1 M̲A̲N̲U̲F̲A̲C̲T̲U̲R̲I̲N̲G̲ ̲P̲R̲O̲C̲E̲S̲S̲E̲S̲ ̲A̲N̲D̲ ̲P̲R̲A̲C̲T̲I̲C̲E̲S̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲S̲
3.1.1 M̲a̲t̲e̲r̲i̲a̲l̲s̲
Selection of materials for encapsulation and embedment.
SRS 3.5.2.3/STD 02 - 6.1.2.2.
3.1.2 C̲o̲v̲e̲r̲ ̲P̲l̲a̲t̲e̲s̲
Mechanical requirements to fasteners for cover plates.
SRS 3.5.2.6/STD 02 - 6.1.2.3/SDT 03 - 2.2.2.3.
3.1.3 F̲l̲u̲x̲ ̲a̲n̲d̲ ̲S̲o̲l̲d̲e̲r̲i̲n̲g̲
Workmanship of solderings.
SRS 3.5.2.8/STD 02 - 6.1.2.6.7.8.
3.1.4 N̲a̲m̲e̲ ̲P̲l̲a̲t̲e̲s̲ ̲a̲n̲d̲ ̲M̲a̲r̲k̲i̲n̲g̲s̲
Content of identification marking of sub-assemblies,
units, and modules.
SRS 3.5.2.14/STD 02 - 6.1.2.4.2/SD/STD/001.
3.2 P̲A̲R̲T̲S̲ ̲A̲N̲D̲ ̲C̲O̲M̲P̲O̲N̲E̲N̲T̲S̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲S̲
3.2.1 C̲o̲n̲t̲r̲o̲l̲s̲
Layout of controls shall be such as to avoid errors
as a result of bumping, touching, or catching of clothing.
SRS 3.5.2.15.
3.3 D̲E̲S̲I̲G̲N̲ ̲A̲N̲D̲ ̲C̲O̲N̲S̲T̲R̲U̲C̲T̲I̲O̲N̲ ̲C̲R̲I̲T̲E̲R̲I̲A̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲S̲
3.3.1 A̲c̲o̲u̲s̲t̲i̲c̲ ̲N̲o̲i̲s̲e̲
Maximum sound level emitted shall be less than 70 dB
(A) at 2 meters distance.
SRS 3.5.2.16/STD 02 - 6.3.2.6.
3.3.2 S̲a̲f̲e̲t̲y̲
Personnel shall be protected from voltages in excess
of 30 volts. Markings on equipment where dangerous
voltages may be encountered. Location and construction
of circuit breakers, switches, and fuses. Grounding.
SRS 3.5.2.13/STD 02 - 6.3.2.7.
3.3.3 V̲e̲n̲t̲i̲l̲a̲t̲i̲o̲n̲ ̲a̲n̲d̲ ̲C̲o̲o̲l̲i̲n̲g̲
Requirements to intake and exhaustion of cooling air.
Air filter thickness of 2.5 cm. No deterioration of
equipment performance caused by resonance and vibration.
SRS 3.5.2.9/STD 02 - 6.3.2.8.4.
3.3.4 A̲v̲a̲i̲l̲a̲b̲i̲l̲i̲t̲y̲ ̲a̲n̲d̲ ̲M̲a̲i̲n̲t̲a̲i̲n̲a̲b̲i̲l̲i̲t̲y̲
Availability calculation. Availiability and reliability
performance requirements. Equipment redundancy.
SRS 3.4.4.
3.3.5 I̲n̲t̲e̲r̲c̲h̲a̲n̲g̲e̲a̲b̲i̲l̲i̲t̲y̲
Modular hardware construction. Minimum different types
of cables, connectors, components and accessories.
Units and sub-assemblies shall be interchangeable without
modification or regard to the source of manufacture.
SRS 3.5.2.4/STD 02 - 6.3.2.4/STD 03 - 2.4.
3.3.6 C̲a̲b̲l̲i̲n̲g̲ ̲a̲n̲d̲ ̲F̲i̲t̲t̲i̲n̲g̲s̲
Proper connection of cable shielding. Requirements
to identification of cables.
SRS 3.5.2.7/STD 02 - 6.3.2.7.5.4/STD 03 - 4.6.3.
3.3.7 T̲e̲s̲t̲ ̲a̲n̲d̲ ̲R̲e̲p̲a̲i̲r̲
Accessibility. Testpoints.
SRS 3.5.2.11/STD 02 - 6.3.2.1/STD 03 - 2.2./STD 03
- 4.8.2.
3.3.8 P̲o̲w̲e̲r̲ ̲I̲n̲p̲u̲t̲
Phases. Voltages. Frequency. Harmonic Distortion. Transients.
SRS 3.4.2.2.
3.4 E̲N̲V̲I̲R̲O̲N̲M̲E̲N̲T̲A̲L̲ ̲R̲E̲S̲I̲S̲T̲A̲N̲C̲E̲
3.4.1 T̲e̲m̲p̲e̲r̲a̲t̲u̲r̲e̲
Range: 10 to 40 deg. C
change: Max. 10 deg. C per hour
SRS 3.4.3.1/Amd. NGTS 40 Method 501 Proc. II
3.4.2 H̲u̲m̲i̲d̲i̲t̲y̲
Range: 40 to 90% RH, non-condensing
Change: Max. 6% RH per hour, non-condensing
SRS 3.4.3.1/Amd. NGTS 40 Method 507 Proc. II
3.4.3 A̲l̲t̲i̲t̲u̲d̲e̲
Range: Sea level to 2000 meters
SRS 3.4.3.1/Amd. NGTS 40 Method 500 Proc. I
3.4.4 B̲e̲n̲c̲h̲ ̲H̲a̲n̲d̲l̲i̲n̲g̲
Dropped onto a hard surface from a 30…0e…o…0f… angle using
anyone edge of the unit as a pivot.
SRS 3.5.2.5/Amd NGTS 40 Method 516 proc. V.
3.4.5 D̲u̲s̲t̲ ̲a̲n̲d̲ ̲F̲u̲m̲e̲s̲
Requirement to air environment.
SRS 3.4.3.2.
4̲ ̲ ̲F̲U̲N̲C̲T̲I̲O̲N̲A̲L̲ ̲D̲E̲S̲I̲G̲N̲ ̲C̲H̲A̲R̲A̲C̲T̲E̲R̲I̲S̲T̲I̲C̲S̲
4.1 H̲A̲R̲D̲W̲A̲R̲E̲ ̲F̲U̲N̲C̲T̲I̲O̲N̲A̲L̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲S̲
To be extracted from the SDS.
4.2 E̲X̲T̲E̲R̲N̲A̲L̲ ̲I̲N̲T̲E̲R̲F̲A̲C̲E̲ ̲C̲H̲A̲R̲A̲C̲T̲E̲R̲I̲S̲T̲I̲C̲S̲
4.2.1 C̲o̲n̲n̲e̲c̲t̲i̲v̲i̲t̲y̲
Standardization of hardware and software to provide
the required facilities of any of the installations.
Equipment provided at all installations shall differ
only in the number of units in each configuration.
The equipment shall have sufficient capacity to allow
for increase of size of control programs up to 10%.
Definition of equipped -, wired- and connected capacity
for each site installation.
SRS 3.4.1.7.
4.2.2 E̲x̲p̲a̲n̲d̲a̲b̲i̲l̲i̲t̲y̲
Upgrade of message traffic capacity by a maximum of
30%.
Possibility by addition of hardware to increase the
number of terminals.
SRS 3.4.1.8.
4.2.3 I̲n̲t̲e̲r̲f̲a̲c̲e̲ ̲C̲a̲p̲a̲b̲i̲l̲i̲t̲i̲e̲s̲
According to table in SRS 3.4.1.9.
4.3 S̲P̲E̲C̲I̲F̲I̲C̲ ̲E̲Q̲U̲I̲P̲M̲E̲N̲T̲ ̲C̲H̲A̲R̲A̲C̲T̲E̲R̲I̲S̲T̲I̲C̲S̲
4.3.1 V̲i̲s̲u̲a̲l̲ ̲D̲i̲s̲p̲l̲a̲y̲ ̲U̲n̲i̲t̲s̲
Characteristics for:
Keyboard, Screen, Character Code, Interfaces, Editing
funtions, Video functions, Modes of operation, Key
function, Radiation and Audio alarm.
SRS 3.4.1.10.1.
4.3.2 M̲e̲d̲i̲u̲m̲ ̲S̲p̲e̲e̲d̲ ̲T̲e̲l̲e̲p̲r̲i̲n̲t̲e̲r̲s̲
Characteristics for:
Printing format, printing speed, Interface, Character
code, Warning signals, Paper control, Radiation and
Acoustic noise.
SRS 3.4.1.10.2.
4.3.3 P̲a̲p̲e̲r̲ ̲T̲a̲p̲e̲ ̲R̲e̲a̲d̲e̲r̲
Characteristics for:
Reading speed Paper tape, Interface, Tape loading,
Control, Key function, Mechanical layout and Radiation.
SRS 3.4.1.10.3.
4.3.4 P̲a̲p̲e̲r̲ ̲T̲a̲p̲e̲ ̲P̲u̲n̲c̲h̲e̲r̲
Characteristics for:
Punching speed, Paper tape, Interface, Tape loading,
Control, Mechanical Layout, Special Facilities and
Radiation.
SRS 3.4.1.10.4.
4.3.5 L̲i̲n̲e̲ ̲P̲r̲i̲n̲t̲e̲r̲s̲
Characteristics for:
Speed, Paper control and Radiation.
SRS 3.4.1.10.5.
4.3.6 F̲l̲o̲p̲p̲y̲ ̲D̲i̲s̲k̲
Dual drive floppy disk. Each diskette shall have a
storage capacity of 256K bytes.
SRS 3.4.1.10.6.
4.3.7 M̲o̲d̲e̲m̲s̲ ̲f̲o̲r̲ ̲R̲e̲m̲o̲t̲e̲ ̲N̲I̲C̲S̲ ̲T̲A̲R̲E̲
FSK modem according to CPS/ICD/004.
SRS 3.4.1.10.7.
4.4 S̲E̲C̲U̲R̲I̲T̲Y̲ ̲R̲E̲L̲A̲T̲E̲D̲ ̲S̲Y̲S̲T̲E̲M̲ ̲D̲E̲S̲I̲G̲N̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲S̲
A clean architectual design where unassigned codes
must cause a trap.
Protection of memory program and data areas.
Normal and privileged instructions shall exist.
The occurrence and/or attempted execution of any illegal
code shall be signalled and result in an abort. Key
switches on all VDUs and MSPs. A read/write memory
erase function feature shall be provided.
All hardware shall be individually addressable by the
computer.
SRS 3.4.5.7.
