top - download
⟦1d6e93b2e⟧ Wang Wps File
Length: 7654 (0x1de6)
Types: Wang Wps File
Notes: DUNN CAMERE
Names: »3103A «
Derivation
└─⟦67e26c09b⟧ Bits:30006222 8" Wang WCS floppy, CR 0244A
└─ ⟦this⟧ »3103A «
WangText
1982-12-01 FE/amn
to: dunn camera
att: sales department
cc: jan hendriksen, loge/dk
fm: christian rovsing a/s
flemming enevoldsen
our ref: sys/tlx/090
subject: request for quotation for supply of one graphic
digitizer, one color camera, one color graphic copier
and
10 video copiers
------------------------------------------------------------
Your are hereby invited to submit a quotation for the supply
of the above equipment in accordance with the specifications
and conditions stated below.
1 general technical requirements
1.1 graphic digitizers
----------------------
A flatbed (tablet) digitizer must be provided with an accompanying
color graphics monitor. It must convert lines or graphic representations
into digital data that can be processed by the central system
processors. This device must interface through the system to
subsystem files to enter and store graphic data. The following
features are also required:
1) An electronic cursor (pen or stylus)
2) Resolution of not less than 100 points per inch
3) Accuracy to .01 inches
4) An active input area of not less than 8 1/2 x 11 inches
1.2 Color graphics camera.
-------------------------
the color graphics camera must interface directly with the system
and have the following capabilities:
1) minimum throughput copying rate of one copy every
two minutes.
2) reproduce images created by both VDU's and color
graphic display units onto
a) 35 mm color slides
b) 8'' x 10'' color prints, on self, on self-developing
stock
c) and 8'' x 10'' color transparencies, on self-developing
stock.
3) create accurate reproductions of the images in
both color and detail, providing both high image
resolution and accurate rendition of color brightness.
1.3 Video copier
----------------
the video copier shall reproduce on paper, monocolor images
created on the color graphics terminals. the copier must have
the following capabilities:
1) each copier shall be connected directly to a color
graphic display units.
2) the resolution of the copier shall be at least 100
dots per linear inch
3) print at least (five) 5 copies per minute
4) meet the tempest requirements of nacsim 5100a.
1.4 color graphic copier
------------------------
this device will be used only for output from the system. the
following features are required:
1) resolution of at least 100 points per inch
2) at least 7 colors, black, red, blue, green, yellow,
cyan, and magenta must be provided
3) output, in monocolor or color, any digitized data
displays contained in the data base.
4) output on both paper and transparency materials
5) print an aggregate speed of three pages (8 1/2 x
11 inches) per minute.
6) interface directly with the host system.
2. power input
--------------
the equipment must be able to operate with a power source of
120/208 volts plus or minus 10 per cent, 60 hz plus or minus
1 per cent, three-phase, four wire system. power input harmonic
distortion requirement must be less than 5 per cent.
3. air conditioning
--------------------
the equipment must be able to operate within a temperature range
of 70 degrees f, plus or minus 20 degrees f. and a relative
humidity between 35 per cent and 95 per cent.
4. software
-----------
detailed information on software is requested, especially host
resident s/w. Can you supply it? What is language is it written
in?
5. interface
-------------
the interface requirement to the host must be specified.
6. Logistics
------------
6.1 documentation
-----------------
6.1.1
the supplier will be requested to submit documentation to component
level, covering only the equipment supplied.
6.1.2
the parts list to component level must include true manufacturer's
part numbers.
6.1.3
the documentation standard and quality shall enable reproduction
and the supplier will be requested to grant permission to reproduce
for the purpose of the this program.
6.1.4
the documentation shall include information suitable for the
user, for maintenance at subassembly level, and for maintenance
at component level at depot.
6.1.5
all documentation shall be subject to review and approval by
cr before delivery.
6.2 training
------------
6.2.1
self-study training package or other training documentation
must be supplied as part of the contract.
6.3 serviceability
--------------------
6.3.1
it shall be easy to diagnose and fault-find to module level.
fault shall be identifiable to a single module.
6.3.2
a thorough and easily understandable checking and calibration
procedure must be supplied with the equipment
6.3.3
all necessary special tools and special test instruments should
be listed and unit prices quoted.
6.3.4
a recommended spare parts list must be submitted and a not-to-exceed
cost of a 90 days spare stock quoted.
6.3.5
meantime between failures (mtbf.), meantime to repair (mttr)
as well as down-time must be specified in quotation.
6.3.6
the rspl shall be submitted for site level (module exchange)
and depot level (component repair) and mtbf must be specified
for all subassemblies and components.
6.3.7
the manufacturers configuration management procedures shall
be submitted.
6.3.8
field change notices must be supplied with necessary parts
and with documentation change notices as long as the equipment
exists in the manufacturers product line.
7. general conditions
----------------------
7.1 delivery schedule:
2 months after contract award(contract expected july 1983)
7.2 terms of delivery:
delivery shall be made cif cr's facility in ballerup, copenhagen.
delivery charges should be quoted separately
7.3 origin
bidder shall warrant the origin country of the equipment
7.4 packaging
packaging shall be for air, sea, and land transportation to
best commercial practice.
container which can be used for re-export are required, bidder
is asked to specify his packaging method.
7.5 warranty
except as otherwise provided in this clause, the bidder warrants
that all items to be delivered shall be fit and sufficient for
the purpose intended, as stated in the specifications, new,
merchantable, of good material and workmanship free from defect,
and conforming to the specifications. the warranty shall remain
in effect for a period of twelve (12) months after cr's acceptance
7.6 acceptance
acceptance of delivery will be given upon incoming inspection
at cr's facility
7.7 supply warranty
bidder are requested to warrant the supply of similar units
and spares for a period of 10 years
7.8 quality assurance
bidder are requested to accept source inspection by national
qa authorities in accordance with mil-i-45208a.
7.9 terms of payment
bidder are requested to accept and base their quotation on payment
120 days from delivery to cr's facility.
7.10 type of quotation
quotations should be firm fixed prices valid for 270 days from
submission of quotation
quotations should include all necessary or recommended accessories.
7.11 submission of quotation
quotation should be received by cr no later than 19 december
1982.
quotation should be sent to:
christian rovsing a/s
2, lautrupvang
dk-2750 ballerup
denmark
attn: mr Flemming Enevoldsen
7.12 notice to cr
please confirm your intention to quote by telex to cr (35111
cr dk).
please by telex inform of actual submittal of quotation on date
of your submittal.
please submit technical information without delay.
hoping that you will accept this invitation, we are looking
forward to receiving your quotation.
yours sincerely,
christian rovsing A/S
flemming enevoldsen
