top - download
⟦1f1a3d8c9⟧ Wang Wps File
Length: 5456 (0x1550)
Types: Wang Wps File
Notes: Spelunked
Names: »~ORPHAN76.08«
Derivation
└─⟦67e26c09b⟧ Bits:30006222 8" Wang WCS floppy, CR 0244A
└─ ⟦this⟧ »~ORPHAN76.08«
WangText
1982-12-14 ALF/amn
to: S G C/George Brazel, VP Marketing
fm: Christian Rovsing A/S
A.L. Friedman
Subject: ACCESS : RFQ FOR
1. VIDEO COPIE
2. VDU
3. Color Graphic Display Unit (CGDU)
4. Letter Quality Printer
Following our telephone conversation of the 13th December, which
I found most informative and helpful, SGC is invited to submit
a quotation for supplyof the above listed ites in accordance
with the specifications and conditions given below.
1. general technical requirements (ACCESS RFP)
-------------------------------------------
1.1 Video Copier (GC ref. T 5122)
The Video Copier shall reproduce on paper, monocolor
images created on the color graphics terminals. The
copier must have the following capabilities:
1) Each copier shall be connected directly to CGDU.
2) The resolution of the opier shall be at least
100 dots per linear inch.
3) Print at least (five) 5 copies per minute
4) Meet the TEMPEST requirements of NACSIM 5100A
1.2 VDU (sgc ref. t 5140)
1) a) a minimum of 24 lines of 80 characters each
b) a display area of t least 70 square inches
c) a minimum matrix of 7x9, if the dot matrix
character generation technique is used.
d) a cursor symbol that does not obscure any
information (excluding underline).
e) No visible flicker, jitter, or distortion
in dislay.
f) display easily read in an ambient light of
50 footcandles.
g) non-glare viewing surface.
h) designed so that no moire patterns are generated
by anay device inserted between the CRT and
the operator.
i) highlighting (either reverse vdeo, or different
shade/color, or different intensity, etc.)
under operator and application program control
and available for word, line, or paragraph.
j) brightness control.
k) a programmable audible signal.
l) display the 95-character ASCIIsubset as specified
in FIPS PUB 15 section 1.
m) selectable, switchable terminal rates of
1200, 2400, 4800, and 9600 bps.
n) Keyboard.
1 separate from the terminal and attached
by cable.
2 generate the 128 character set specified
in FIPS
PUB 1.
3 layout conforming with ansi standar x4.14-1971.
4 repeat function for all keys
6 not less than eight programmable function
keys.
o) cursor and screen control. The following
cursor and and screen controlfunction must
be provided for both operator and program
control:
1 up, down, right, left, home
2 cursor return to beginning of next line
3 clear screen
4 set and reset tab stops in any column
5 set and reset vertical tab stops
6 backspacng with erasing of character
7 clear from cursor position to end of line
8 clear from cursor postion to end of page
p) Paging. access a minimum of 7,680 alphanumeric
characters for display and action as indicated
below.
1) selectively dispay and transmit by page.
2) insert, delete, clear, and change the 7,680
characters via the terminal keyboard
3) roll the display up and down through the stored
data. as a line of data scrolls off the top or
bottom of the display, the nxt line of stored
data must be display at the bottom or top of
the display, respectively.
q) meet the TEMPEST requirements of NACSIM 5100a.
1.3 color graphic display unit (sgc ref. t 5127 -
oem 4027)
the cgdu must meet all the requirements of th vdu plus
the following:
a) create and display text and graphic information.
b) a display area of not less than 75 square inches.
c) screen definition of not less than 512 x 476
individually addressable and color definable
pixels.
d) drive thevideo copier in a slave mode.
e) minimum data rate of 9600 bps.
f) graphics capabilities as listed below:
1 alphanumeric formats in uppper and lower case
in multiple font styles and sizes (displayable
within a single graphics screen image).
2circles
3 pie charts
4 squares and rectangles
5 bar charts
6 curves
7 vectors
8 line drawing
9 tabular data
10 automatic layout. (take tabulated data and
automatically create the desired chart without
requiring the user to plot or daw the chart on
the terminal).
11 shading patterns
12 stacked or hidden bars
13 precomposed images (logos and maps)
g) edit and randomly move representation on the
screen.
h) basic foreground and background colors of black,
red, green, blue yellow, magenta, cyan, and white.
i) eight colors to be represented on the screen
at any one time.
1.4 letter quality printer (sgc ref. t 5162)
(please note that we have not yet received the relevant
rfp amendment)
the following are required:
1. printing
a) a minimum speed of 35 cps.
b) the 95 character subset as specified in fips
pub 15, section 1.
c) use of the control characters designated
by the 128 character set specified in fips
pub 1.
d) a minimum of eighty (80) charactrs per line
on continuous form paper.
e) single and double spacing under program control
f) lines of both 10 and 12 cpi.
g) print six and eight lines per inch
h) interchangeable character sets including
the fips pub 32, ocr-a size 1.
i) oe original plus five legible copies from
carbon interleaved paper.
j) program controlled forms spacing without
using carriage control tapes.
k) interchangeable tractor feeding and manual
single sheet feeding.
l) print descenders
m) interfac
