top - download
⟦1fdfe4717⟧ Wang Wps File
Length: 3710 (0xe7e)
Types: Wang Wps File
Notes: Spelunked
Names: »~ORPHAN41.03«
Derivation
└─⟦e9ca1be93⟧ Bits:30006183 8" Wang WCS floppy, CR 0382A
└─ ⟦this⟧ »~ORPHAN41.03«
WangText
…86…1 …02… …02… …02… …02…
4.2 S̲T̲R̲U̲C̲T̲U̲R̲E̲ ̲O̲F̲ ̲T̲H̲E̲ ̲S̲P̲M̲V̲
The SPMV has been divided into six chapters and one Annex common to all packages.
Further chapters shall be added as chapter 7 to N.
4.3 G̲U̲I̲D̲E̲L̲I̲N̲E̲S̲ ̲F̲R̲ ̲T̲H̲E̲ ̲C̲H̲A̲P̲T̲E̲R̲S̲ ̲O̲F̲ ̲T̲H̲E̲ ̲S̲P̲M̲V̲
4.3.1 C̲h̲a̲p̲t̲e̲r̲ ̲1̲ ̲o̲g̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
a) Section 1.1 shall describe the purpose of the volume using the following as a
guide:
1) To provide information of the physical location of software units.
2) To provide informatio necessary to maintain the XXX Package.
b) Section 1.2 shall identify all documents describing the Package Design and all
Disks containing software pertinent to the package.
1) Section 1.2.1 shall include the following documents:
- CPS/SDS001
- CPS/SDS/xxx
- CPS/ICD/009
- CPS/DBD/001
2) Section 1.2.2 shall include the identification of the following disks:
- Package Configuration Disk
- Package Integration Disk
4.3.2 C̲h̲a̲p̲t̲e̲r̲ ̲2̲ ̲o̲f̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
Chapter 2 shall contin the Configuration Log as delivered to Configuration Management,
i.e the release/version number shall be present.
a) Section 2.x shall contain the Package Log. If a
package has been further subdivided into subpackages,
which each conceptually is thought of as a package
itself, a section 2.x, .x.y shall exist for each
such subpackage.
b) Section 2.x.y shall contain the subpackage log.
4.3.3 C̲h̲a̲p̲t̲e̲r̲ ̲3̲ ̲o̲f̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
Chapter 3 shall describe the Package Configuration
Disk.
a) Section 3.1 shall identify the contents of the
disk and Drectory Structure for the Package Directory.
If doc. CPS/AUX/023 has been strictly followed
a reference to this document together with a figure
as the one presented in CPS/AUX/023 will be sufficient.
b) Section 3.2 shall identify all the jobfilesof the
Package Directory, what they do and how they are
executed (i.e. from which directory shall they
be invoked etc.)
If CPS/AUX/023 has been strictly used a reference
to this document will be sufficient.
4.3.4 C̲h̲a̲p̲t̲e̲r̲ ̲4̲ ̲o̲f̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
Chaptr 4 shall for each module/procedure of the package
identify: The CAMPS Prefixes, the CAMPS DATA, Package
Prefixes and Data, the subpackage prefixes and data
utilized/used by the modules/procedures.
The formes to be used and filled out for section4.1
and 4.2 refer Annex A. The forms for section 4.3 and
4.4 shall have a layout similar to the ones in Annex
A.
4.3.5 C̲h̲a̲p̲t̲e̲r̲ ̲5̲ ̲o̲f̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
Chapter 5 shall for each Common Package Procedure and
for each Common Subpackage Procedure identify th Package/Subpackage
modules calling it.
An examble of the formula to be filled out is contained
in Annex B. A similar layout shall be produced and
inserted.
4.3.6 C̲h̲a̲p̲t̲e̲r̲ ̲6̲ ̲o̲f̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
Chapter 6 shall contain a desription of the Contents
of the Package Integration Disk.
a) Section 6.1 shall identify the contents and describe
the Directory Structure.
b) Section 6.2 shall identify the jobfiles, what they
do and how to execute them.
4.3.7 C̲h̲a̲p̲t̲e̲r̲ ̲7̲ ̲t̲o̲ ̲N̲ ̲f̲ ̲t̲h̲e̲ ̲S̲P̲M̲V̲
These chapters shall contain all information pertinent
for the maintenance of the package, which are not described
in the previous chapters.
4.3.8 A̲n̲n̲e̲x̲ ̲A̲
Annex A shall contain the Package Integration Test
Procedures. If these aredefined in files residing on
the integration disk, these files shall be referenced.
ANNEX A
ANNEX B
