top - download
⟦239beb306⟧ Wang Wps File
Length: 11274 (0x2c0a)
Types: Wang Wps File
Notes: Spelunked
Names: »~ORPHAN50.01«
Derivation
└─⟦b22bdc4b4⟧ Bits:30006159 8" Wang WCS floppy, CR 0248A
└─ ⟦this⟧ »~ORPHAN50.01«
WangText
DI Discussion
DE Demonstration
L Lecture
GW Group Work
T Test
I Informal Talk
S Self Study
EX Exercise
LG Laboratory Guide
OH Overhead/Handout…86…1 …02… …02… …02…
2793A
840620
WEEK SPECIFIC ABBREVIATIONS
WEEK NO 4 CAMPS
HBK CR80 MINICOMPUTER HANDBOOK 82/83
SLM CPS/TCM/005 (SITE LEVEL MAINTENANCE MANUAL)
HWB CS/SDS/017 (HARDW. ASSY BREAKDOWN)
2793A/rt…02…4:1:4-6
…02…NEN/840620…02……02…1
STUDENT LABORATORY GUIDE
…02… CAMPS
No exercise in Lesson 4:1:4-6
but Instructor Guided practice subjects as follows:
- TDX SYSTEM INTRODUCTION & DEMONSTRATION
- INTRODUCTION OF THE TDX RELATED SECTIONS OF THE
SLM & HWB.…86…1 …02… …02… …02… …02…
2793A/rt…02…4:2:4-6
…02…NEN/840620…02……02…1
STUDENT LABORATORY GUIDE
…02… CAMPS
T̲D̲X̲ ̲S̲Y̲S̲T̲E̲M̲ ̲S̲T̲A̲T̲U̲S̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- CONFIGURATE a VDU for TDX-CONTROLLER CONNECTION
- STATE the RELATIONSHIP of DEVICE ADDRESS and
LOCATION in the TDX UNITS
- STTE the DIFFERENCE between M&D TDX SYSTEM
TESTS and TDX SYSTEM STATUS TEST
- DESCRIBE the BSM-X BUS SWITCHING
- DESCRIBE the RELATIONSHIP OF BSM-X, TDX-BUS,
and TDX CONTROLLER
REFERENCE: CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:̲
GUIDE: SECTION 4.3.3.4, FIGURE 4.3.3.4-2
NOTE! This TEST PROGRAM is part of the APPLICATION
SOFTWARE stored in the TDX CONTROLLER MEMORY.
RESPNSE ON S̲L̲M̲:
THE VDU: SECTION 4.3.3.4, FIGURE 4.3.3.4-2
NOTE! "DEVICE NO." is DECIMAL NO. (See 4:1:1:OH5-7…86…1
…02… …02… …02… …02…
2793A/rt…02…4:2:4-6
…02…NEN/840620…02……02…2
STUDENT LABORATORY GUIDE
…02… CAMPS
B̲O̲O̲T̲ ̲U̲P̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲S̲ ̲f̲o̲r̲ ̲t̲h̲e̲…01…M̲&̲D̲ ̲T̲D̲X̲ ̲S̲Y̲S̲T̲E̲M̲ ̲T̲E̲S̲T̲ ̲P̲R̲O̲G̲R̲A̲M̲S̲
OBJECTIVES: Enable the STUDENTS to BOOT UP the M&D TDX SYSTEM
TEST PROGRAMS from
- FLOPPY DRIVE (FD)
- STORAGE MODULE DRIVE (SMD)
REFEENCE: CAMPS S̲ITE L̲EVEL M̲AINTENANCE MANUAL, CPS/TCM/005
EXERCISE
GUIDE: The following COMMANDS will be entered from the
MAINTENANCE POSITION
l. SELECT an OFF-LINE PU
COMMAND: PU#1 ^ENTER^
or PU#2 ^ENTER^
2. RSET the selected PU
COMMAND: RSET ^ENTER^
3. ENABLE the selected PU
COMMAND: ENPU ^ENTER^
4. ENABLE the "TAKE OWNERSHIP" possibility of
the respective I/O Bus in the CU.
COMMAND: ENTO ^ENTER^
5. ENABLE the resective DISK CONTROLLER.
COMMAND: IR 1A .. ^CR^
MODULE ADDRESS (MA)…86…1
…02… …02… …02… …02…
2793A/rt…02…4:2:4-6
…02…NEN/840620…02……02…3
STUDENT LABORATORY GUIDE
…02… CAMPS
6. BOOT UP from FLOPPY DRIVE (FD)
NOTE! The TEST PROGRAMS concerning the LTUX-S
MODULES associated one TDX UNIT are stored
in the resective DISKETTE labeled with
the TDX UNIT N̲O̲.
Each of these DISKETTES are also containing
the STI TEST PROGRAM and the TDX BUS TEST
PROGRAM.
6.1 INSERT the selected DISKETTE in FLOPPY DISK
DRIVE [ or 1.
6.2 Perform the BOOT COMMANDS acording to S̲L̲M̲,̲
SECTION 4.7.2.1.8, STEP [.
7. BOOT UP from STORAGE MODULE DRIVE (SMD).
NOTE! The TEST PROGRAMS concerning the LTUX-S
MODULES associated one TDX UNIT are stored
in the FILE numbered with the BFD NO. according
to the table elow.
Each of these FILES are also containing
the STI TEST PROGRAM and the TDX BUS TEST
PROGRAM.
TDX SYSTEM TEST PROGRAMS STORED ON THE
DISK PACK:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
^ ̲ ̲T̲D̲X̲ ̲U̲N̲I̲T̲ ̲N̲O̲.̲ ̲^̲ ̲ ̲ ̲ ̲B̲F̲D̲ ̲N̲O̲.̲ ̲ ̲ ̲ ̲^
^ ^ ^
^ 1-5 ^ 2E6 ^
^ 6-A ^ 2E7 ^
^ B-F ^ 2E8 ^
^ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲^̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲^
7.1 INSTALL the DISK PACK in the SMD,
7.2 Perform he BOOT COMMANDS according to S̲L̲M̲,̲
SECTION 4.7.2.1.8, STEP [.
2793A/rt…02…4:2:4-6
…02…NEN/840620…02……02…4
STUDENT LABORATORY GUIDE
…02… CAMPS
S̲T̲I̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- STATE the TDX DEVICES which are ACCESSED by
the TEST
- DESCRIBE the FUNCTION of the TEST
- BOOT UP the TEST PROGRAM
- FULLFIL an ERROR FREE TEST
- STATE the RESPONSE appearing on the VDU
- STATE the ERROR CODES and MESSAGES
REFERENCE: CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:
GUIDE: SECTION 4.7.2.1.8, STEP 2-5
RESPONSE ON S̲L̲M̲:̲
THE VDU: SECTION 4.7.2.2, POINT g.2
ERROR CODES S̲L̲M̲:
AND MESSAGES: SECTION 4.7.2.2, POINTS g.8 and g.9…86…1
…02… …02… …02… …02…
2793A/rt…02…4:3:4-6
…02…NEN/840620…02……02…1
STUDENT LABORATORY GUIDE
…02… CAMPS
T̲D̲X̲ ̲B̲U̲S̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- STATE the TDX DEVICES which are ACCESSED by
the TEST
- DESCRIBE the FUNCTION of the TEST
- BOOT UP the TEST PROGRAM
- FULLFIL an ERROR FREE EST
- STATE the RESPONSE appearing on the VDU
- STATE the ERROR CODES and MESSAGES
REFERENCE: CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:̲
GUIDE: SECTION 4.7.2.1.8, STEP 6-10
RESPONSE ON S̲L̲M̲:̲
TE VDU: SECTION 4.7.2.2, POINT g.3
ERROR CODES S̲L̲M̲:̲
AND MESSAGES: SECTION 4.7.2.2, POINTS g.8 and g.9…86…1
…02… …02… …02… …02…
2793A/rt…02…4:3:4-6
…02…NEN/840229…02……02…2
STUDENT LABORATORY GUIDE
…02… CAMPS
L̲T̲U̲X̲ ̲S̲T̲A̲T̲U̲S̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- STATE the TDX DEVICES which are ACCESSED by
the TEST
- DESCRIBE the FUNCTION of the TEST
- BOOT UP the TEST PROGRAM
- FULLFIL an ERROR FEE TEST
- STATE the RESPONSE appearing on the VDU
- STATE the ERROR CODES and MESSAGES
REFERENCE : CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:̲
GUIDE: SECTION 4.7.2.1.8, STEP 11-14
NOTE! The LTUX ̲STATUS NO." is the respective
LTUX-S PORT ID. (See 4:1:1:OH5-7)
RESPONSE ON S̲L̲M̲:̲
THE VDU: SECTION 4.7.2.2, POINT g.4
ERROR CODES S̲L̲M̲:̲
AND MESSAGES: SECTION 4.7.2.2, POINTS g.8 and g.9…86…1
…02… …02… …02… …02…
2793A/rt…02…4:4:4-6
…02…NEN/840620…02……02…1
STUDENT LABORATORY GUIDE
…02… CAMPS
T̲D̲X̲ ̲L̲T̲U̲X̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- STATE the TDX DEVICES which are ACCESSED by
the TEST
- DESCRIBE the FUNCTION of the TEST
- BOOT UP the TEST PROGRAM
- FULLFIL an ERROR FREETEST
- STATE the RESPONSE appearing on the VDU
- STATE the ERROR CODES and MESSAGES
REFERENCE : CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:̲
GUIDE: SECTION 4.7.2.1.8, STEP 15-18
NOTE! OPEN "NO." is the resective LINE PORT ID.
(See 4:1:1:OH5-7)
RESPONSE ON S̲L̲M̲:̲
THE VDU: SECTION 4.7.2.2, POINT g.5
ERROR CODES S̲L̲M̲:̲
AND MESSAGES: SECTION 4.7.2.2, POINTS g.8 and g.9…86…1
…02… …02… …02… …02…
2793A/rt…02…4:4:4-6
…02…NEN/840620…02……02…2
STUDENT LABORATORY GUIDE
…02… CAMPS
T̲D̲X̲ ̲L̲O̲O̲P̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- STATE the TDX DEVICES, ADAPTORS, and PERIPHERALS,
which are ACCESSED by the TEST
- DESCRIBE the FUNCTION of the TEST
- BOOT UP the TEST PROGRA
- FULLFIL an ERROR FREE TEST
- STATE the RESPONSE appearing on the VDU
- STATE the ERROR CODES and MESSAGES
REFERENCE : CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:̲
GUIDE: SECTION 4.7.2.1.8, STEP 19-22
NOTE! LOOP "NO." is the respective LINE PORT ID.
(See 4:1:1:OH5-7)
RESPONSE ON S̲L̲M̲:̲
THE VDU: SECTION 4.7.2.2, POINT g.6
ERROR CODES S̲L̲M̲:̲
AND MESSAGES: SECTION 4.7.2.2, POINTS g.8 and g.9…86…1
…02… …02… …02… …02…
2793A/rt…02…4:5:4-6
…02…NEN/840620…02……02…1
STUDENT LABORATORY GUIDE
…02… CAMPS
T̲D̲X̲ ̲V̲D̲U̲ ̲I̲/̲O̲ ̲T̲E̲S̲T̲
OBJECTIVES: ENABLE the STUDENT to
- STATE the TDX DEVICES which are ACCESSED by
the TEST
- DESCRIBE the FUNCTION of the TEST
- BOOT UP the TEST PROGRAM
- FULLFIL an ERROR FEE TEST
- STATE the RESPONSE appearing on the VDU
- STATE the ERROR CODES and MESSAGES
REFERENCE : CAMPS SITE LEVEL MAINTENANCE MANUAL, CPS/TCM/005
EXERCISE S̲L̲M̲:̲
GUIDE: SECTION 4.7.2.1.8, STEP 23-26
NOTE! IO "NO." is the repective LINE PORT ID.
(See 4:1:1:OH5-7)
RESPONSE ON S̲L̲M̲:̲
THE VDU: SECTION 4.7.2.2, POINT g.7
ERROR CODES S̲L̲M̲:̲
AND MESSAGES: SECTION 4.7.2.2, POINTS g.8 and g.9…86…1
…02… …02… …02… …02…
2793A/rt…02…4:5:4-6
…02…NEN/840620…02……02…2
STUDENT LABORATORY GUIDE
…02… CAMPS
C̲R̲A̲T̲E̲ ̲C̲A̲B̲L̲I̲N̲G̲
OBJECTIVES: ENABLE the STUDENT to identify all cables and cable
connections in the TDX SYSTEM.
REFERENCES: CAMPS HARDWARE ASSEMBLY BREAKDOWN/HARDWARE TREE
(CPS/SDS/017).
OH 4 & 5 of te LESSON 4:4:2.
EXERCISE
GUIDE: Switch OFF the MAINS POWER to the TDX CRATES.
Check all TDX CABLE CONNECTIONS according to this
LAB.GUIDE, page 3-7.
Check the INTERNAL CABLE CONNECTIONS according
the OH4 & 5 of the LESSON 4:4:2.
INSERT/CNNECT the MODULES/CABLES if any are REMOVED/DISCONNECTED.
Switch ON the MAINS POWER.
