DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦25f1a4a26⟧ Wang Wps File

    Length: 1148 (0x47c)
    Types: Wang Wps File
    Notes: Spelunked
    Names: »~ORPHAN45.11«

Derivation

└─⟦e48583e73⟧ Bits:30006141 8" Wang WCS floppy, CR 0514A
    └─ ⟦this⟧ »~ORPHAN45.11« 

WangText

en the FIKS network and the NICS-TARE network.

 The point to point connection between FIKS and NICS-TARE is a 600 baud synchronous
 full duplex channel. The link control protocol employed by this channel is the LITSYNC
 Error Detection and Connectio Protocol …0e…1)…0f… (EDC), which ensures an error-free transmission
 across the link.

 Messages for transmission to the NICS-TARE network are enqueued in the NICS-TARE
 Transmission Queue (NT) by the MSS subsystem. Upon transmission, the message is dequeed
 from NT and an acknowledgement (ACK), which confirms a successfully transmission
 of this specific message, is returned to the MSS. Inbound messages received from
 the NICS-TARE network are enqueued in the ACP/SMF conversion queue (CQ1) by the NTSsubsystem
 for onward processing by the MSS. 

 Control and supervision of the NTS is performed by the NSC subsystem. Unrecoverable
 errors (line loss) are reported to the NSC for display on the Supervisor Positions
 VDU. Channel control, i.e. setup, pen and close, are a subset of the supervisors
 interactive functions that monitor the NTS subsystem.





 1) Ref. Doc. FIX/1163/SPC/0005, Issue 1, 800313.