top - download
⟦2fa1434a2⟧ Wang Wps File
Length: 14587 (0x38fb)
Types: Wang Wps File
Notes: Spelunked
Names: »~ORPHAN55.03«
Derivation
└─⟦5254aaab5⟧ Bits:30006166 8" Wang WCS floppy, CR 0227A
└─ ⟦this⟧ »~ORPHAN55.03«
WangText
VAL KEY C format is presented on the VDU screen.
You can use this format to retrieve both incoming and outgoing messages.
2 Observe that the system Refer to Figure 3.3.4.4-1.a.
outputs an identity in the
field TRANSACTION ID and
informaion about the
transaction is sent to your
LOG PRINTER.
3 The TIME STAMP is a
mandatory entry item.
On Keyboard, enter the Refer to Figure 3.3.4.4-1.b.
TIMESTAMP. You must enter the moment from which you search retrieval of a message.
The timestamp must consist of 14 characters.
DATE (2) HOUR (2) MINUTE (2)
ZONE (1) SPACE (1) MONTH (3)
SPACE (1) YEAR (2).
For instance:
192135Z ̲FEB ̲82
4 The WINDOW is an
optional entry item.
If you do not wish to
definethis entry,
proceed to step 6.
3.3.4.4 Retrieval Key Type C (cont'd)
5 On Keyboard, enter Refer to Figure
3.3.4.4-3.a.
HOUR and/or MINUTES This identifies
a time window used
to limit the search
of he catalogue.
You can enter max
upto 6 hours.
For instance:
1 hour 30 minutes
The search will
start at the time
specified in the
time stamp and stop
1 hour and 30 minutes
later.
6 The DATE TIME GROUP
is an optional entry item.
If you do not wish to
define this entry,
proceed to step 8.
7 On Keyboard, enter Refer to Figure
3.3.4.4-3.b.
the DTG The DTG contains
information about
format line 5 of
ACP 127 messages.
The DTG must consist
of 11 characters.
DAE (2) HOUR (2)
Minute (2)
ZONE (1) SPACE (1)
MONTH (3)
For instance: 192135Z
̲FEB
3.3.4.4 Retrieval Key Type C (cont'd)
8 The HEADQUARTERS ID
is an optional entry item.
If you do not wish to
define this entry,
proceed to step 10.
9 On Keybard, enter Refer to Figure
3.3.4.4-5.a.
the ID. The ID contains
information about
format line 6 of
ACP 127 messages.
You can enter the
originating headquarter
using plain language
address (PLA) or
PLA reference number.
10 The SIC is an optonal
entry item.
If you do not wish to
define this entry,
proceed to step 12.
11 On Keyboard, enter Refer to Figure
3.3.4.4-5.b.
the SIC. The subject indicator
code (SIC) contains
a list of SDLs which
distribute an incoming
message.
6 Press ENTER key and Refer to Figure
3.3.4.4-6.a.
proceed to section 3.3.4.7 If more than one
message
Catalogue Key Type C + D + E. satisfied the retrieval
parameters, a catalogue
is presented on
the VDU screen.
If you have employed
and fiished your
retrieve data from
key type C, D, or
E, the same catalogue
will be presented.
This catalogue is
described in section
3.3.4.7 - Catalogue
key type C + D +
E.
3.3.4.5 Retrieval Key Type D (cont'd)
1 Observe that the system Refer to Figure
3.3.4.5-1.
outputs a new format If you have selected
on the VDU screen. D, the RETRIVAL
KEY D format is
presented on the
VDU screen.
You can use this
format to retrieve
both incoming and
outgoing messages.
2 Observe that the system Refer to Figure
3.3.4.5-1.a.
outputs an identity in the
field TRANSACTION ID and
informaion about the
transaction is sent to your
LOG PRINTER.
3 The TIME STAMP is a
mandatory entry item.
On Keyboard, enter the Refer to Figure
3.3.4.5-1.b.
TIMESTAMP. You must enter the
moment from which
you search retrieval-
first draft-, elease
notification- or
comment of a message.
The timestamp must
consist of 14 characters.
DATE (2) HOUR (2)
MINUTE (2)
ZONE (1) SPACE (1)
MONTH (3)
SPACE (1) YEAR (2).
For instance:192135Z
̲FEB ̲82.
4 The WINDOW is an
optional etry item.
If you do not wish to
define this entry,
proceed to step 6.
3.3.4.5 Retrieval Key Type D (cont'd)
5 On Keyboard, enter Refer to Figure
3.3.4.5-3.a.
HOUR and/or MINUTES This identifies
a time window used
to limit the search
of te catalogue.
You can enter max
upto 6 hours.
For instance:
1 hour 30 minutes
The search will
start at the time
specified in the
time stamp and stop
1 hour and 30 minutes
later.
6 The ITEM REF. ID.
is a mandatory entry
item.
On Keyboard, enter Refer to Figure
3.3.4.5-3.b.
the ID. This is the identity
of a message, defined
by the system.
You must enter the
number which identify
the search message.
7 Press ENTER key and Refer to Figure
3.3.4.5-4.a.
proceed tosection 3.3.4.7. If more than one
message
Catalogue Key Type C + D + E. satisfied the retrieval
parameters, a catalogue
is presented on
the VDU screen.
If you have employed
and finished your
retrieve data from
key type C, D, or
E, the same cataloue
will be presented.
This catalogue is
described in section
3.3.4.7 - Catalogue
Key Type C + D +
E.
3.3.4.6 Retrieval Key Type E (cont'd)
1 Observe that the system Refer to Figure
3.3.4.6-1.
outputs a new format If you have selected
on the VDU screen. E, the RETRIVAL
KEY E format is
presented on the
VDU screen.
You can only use
this format to retrieve
incoming messages
2 Observe that the system Refer to Figure
3.3.4.6-1.a.
outputs an identity in the
field TRANSACTION ID and
information about the transaction is
sent to your
LOG PRINTER.
3 The DATE TIME GROUP
is a mandatory entry item.
On Keyboard, enter the Refer to Figure
3.3.4.6-1.b.
DTG. The DTG contains
information about
format line 5 of
ACP 127 messages.
The DTG must cosist
of 11 characters.
DATE (2) HOUR (2)
MINUTE (2)
ZONE (1) SPACE (1)
MONTH (3)
For instance: 192135Z
̲FEB
4 The HEADQUATER ID
is an optional entry item.
If you do not wish to
define this entry,
proceed to step 6.
3.3.4.6 Retrieval Key Type E (cont'd)
5 On Keyboard, enter the ID, Refer to Figure
3.3.4.6-3.a.
The ID contains
information about
format line 6 of
ACP 127 messages.
You can enter the
originating headquarter
using plain language
address (PLA) or
PLA reference number.
6 Press ENTER key and Refer to Figure
3.3.4.6-4.a.
proceed to section 3.3.4.7 If more than one
message
Catalogue Key Type C + D + E. satsfied the retrieval
parameters, a catalogue
is presented on
the VDU screen.
If you have employed
and finished your
retrieve data from
key type C, D, or
E, the same catalogue
will be presented.
This catalogue is
described in section
3.3.4.7 - Cataloue
Key Type C + D +
E…86…1 …02… …02…
…02… …02…
3.3.4.7 Catalogue Key Type C + D + E (cont'd)
1 If only one message
satisfies the retrieval
parameters, proceed to
step 9.
2 If more than one message Refer toFigure 3.3.4.7-1.
satisfies the retrieval For every message
this
parameters, a catalogue is catalogue informs
you about:
presented on the VDU screen
KEY TYPE
TIME STAMP
ITEM REFERENCE ID
HEADQUARTERS ID
DATE TIME GROUP
SICs
3 You can select the
searched message from
the information in the
catalogue.
4 You must enter new command,
and if you want a message
for local use (RELU), re-
addressal (READ), redistribu-
tion (REDS) or deletion (REDE)
belongng to a specific cata-
logue data you must enter the
desired command, and go back
to start in the associated
section and input exactly
this data.
5 On Keyboard, press the Refer to Figure
3.3.4.7-2.a.
program function Key F1. Pressin the F1-Key
informs the system
that the next instruction
is a "command".
3.3.4.7 Retrieval Key Type C + D + E (cont'd)
6 On Keyboard, enter the
desired command.
7 Press ENTER Key. Refer to Figure
3.3.4.7-4.a.
8 If you have selected
the command RELU, proceed
back to step 1 in section
3.3.4, otherwise proceed
to the section associated
with the entered command.
3.3.4.7 Retrieval Key Type C + D + E (cont'd)
9 Observe that the message Refer to Figure
3.3.4.7-5.
is displayed on the VDU
screen.
10 The system displays max
pto 27 lines at once.
If the message is longer
proceed to step 11,
otherwise to step 12.
11 On Keyboard, press Refer to Figure
3.3.4.7-6.a.
the desired DISPLAY You can get the
following
CONTROL Key. page by use of "page
forward" or th opposite
by use of "page
back".
"Scroll forward"
will get you one
line forward and
the opposite by
use of "scroll back".
12 If you do not want a
print of the message,
proceed to step 15.
13 On Keyboard, press Refer to Figure
3.3.4.7-6b.
the program function
Key F3.
14 Press Enter Key. Refer to Figure
3.3.4.7-6.c.
The system will
print out the whole
message on your
SUPERVISOR PRINTER.
3.3.4.7 Retrieval Key Type C + D + E (cont'd)
15 If you have started
the retrieval from
readdressal (READ),
redestribution (REDS)
or deletion (REDE).
Press ENER Key. Refer to Figure
3.3.4.7-8.a.
The system will
send you back to
continue the readdressal,
redistribution or
deletion for the
specific message.
If you need further
information for
continue the readdressal,
proceed to section
3.3.5 - ste 5 and
for continue the
redistribution,
proceed to section
3.3.7 step 2 and
for continue the
deletion, proceed
to section 3.3.8
step 2.
16 If you have started the
retrieval from local use
(RELU), you can break off
by use of a new command
r go back to the message
handling menu (MSGH).
17 If you do not wish to
enter a new command,
proceed to step 21.
3.3.4.7 Retrieval Key Type C + D + E (cont'd)
18 On Keyboard, press the Refer to Figure
3.3.7-10.a.
program function Key F1. Pressing the F1-Key
informs the system
tat the next instruction
is a command.
19 On Keyboard, enter the
command.
20 Proceed to step 22.
21 On Keyboard, press the Refer to Figure
3.3.4.7-10.b.
program function Key F12. Pressing the F12-Key
informs the system
for return to the
mssage handling
menu (MSGH).
22 Press ENTER Key. Refer to Figure
3.3.4.7-10.c.
23 Proceed to the section
associated with your
choice.
3.3.5 Retrieval For Readdressal (READ) (cont'd)
If you have selected
READ, the RETRIEVAL
FOR READDRESSAL
format is presented
on the VDU screen.
Refer to Figure
. .3.5-1.
NOTE: The retrieval
for readdressal
format will be displayed
in 4 different formats:
1. Entry of key
type.
2. Entry of retrieval
data.
3. Display of message.
If more than one
message satisfies
the retrieval parameters,
a ctalogue with
these message data
will be displayed.
You can go back
and enter the specific
data for the desired
message.
3a. Display of catalogue.
4. Display of header
data.
1 Select one of the
following options:
A TIME STAMP + CHNNEL
ID + CHANNEL SERIES
NO.
B TIME STAMP + STATION
ID + STATION SERIES
NO + FILE TIME
E DATE TIME GROUP
+ HQ ID.
3.3.5 Retrieval For Readdressal (READ) (cont'd)
2 On Keyboard, enter Refer to Figure
3.3.5-3.a.
KEY TYPE You must enter one
of the possibilities:
A, B, E.
Ths identify the
code for the key
type by which the
message is to be
retrieved.
Only the key types
A, B, E can be used
under readdressal.
3 Press ENTER Key. Refer to Figure
3.3.5-4.a.
4 The "entry of retrieval
data" is similar to these
decribed during retrieval
for local use.
If you need further You will find the
3 key
information, proceed to sections as described
the selected key section below:
Key A - Section
3.3.4.1
Key B - Section
3.3.4.2
Key E - Section
3.3..6
3.3.5 Retrieval For Readdressal (READ) (cont'd)
5 Observe that the system Refer to Figure
3.3.5-5.
outputs a new format on If you have selected
the VDU screen. REA and retrieved
the specific message,
the READDRESSAL
format is presented
on the VDU screen.
6 Observe that the system Refer to Figure
3.3.5-5.a.
outputs an identity in
the field TRANSACTION ID
and information about the
transaction is sen to
your LOG PRINTER.
7 NOTE: The system inserts Refer to Figure
3.3.5-5.b.
the TIME STAMP and the
ORIGINATING HEADQUARTERS
ID referenced to the
message.
8 The FROM is a mandatory Refer to Figure
3.3.5-5.c.
entry item. You must ente the
On Keyboard, enter the name of one of your
"name". local headquarters
using plain language
address (PLA) of
PLA reference number.
9 The TO ACTION is a Refer to Figure
3.3.5-5.d.
mandatory entry item. You must enter the
On Keyboard, 2̲6̲7̲9̲A̲…00…CPS/OPM/002 (V) …00…rt
…00…CLA …00…SUPERV OPERATION
MAN…00…2̲4̲…00…0̲8̲…00…8̲2̲…00…0̲9̲…00…5̲1̲…00… ̲ ̲ ̲7̲…00…0̲3̲…00… ̲2̲5̲9̲9̲2̲…00…0̲2̲…00…0̲5̲…00…8̲4̲…00…1̲5̲…00…1̲6̲…00… ̲ ̲ ̲ ̲…00…00…00… ̲ ̲ ̲ ̲
̲6…00…2̲7̲…00…0̲4̲…00…8̲4̲…00…1̲0̲…00…3̲6̲…00…07…00…06…00…84…00…14…00…50…00…0227A…00… 16…00… ̲ ̲1̲4̲…00…58…00… 148…00… ̲3̲9̲3̲2̲2…00……1d……00……00……00……07…Q…00……10……00……01……10……05…'…10……11……01…p*̲J̲…15……05……00……00……00……00……00……00……00…B
0…00……19……00……00……00……00…3…02……00……00……86…1 …02…
…02… …02…
2679A/rt …02… CPS/OPM/002
…02… CLA/840406 …02…
CAMPS SUPERVISOR OPERATION MANUAL
…02… Issue 3…02… CAMPS
3.2.12 S̲y̲s̲t̲e̲m̲ ̲P̲a̲r̲a̲m̲e̲t̲e̲r̲ ̲C̲o̲n̲t̲r̲o̲l̲
3.2.12.1 S̲y̲s̲t̲e̲m̲ ̲P̲a̲r̲a̲m̲e̲t̲e̲r̲ ̲C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲n̲u̲ (SYPC)
The menu to this section will give you the possibility
for control of different system parametes like:
- PRINTER/PUNCHER
- CHANNELS
- ACP 127 (allied communication procedures)
- MESSAGE DISTRIBUTION
- SPECIAL DISTRIBUTION
- CRISES INDICATOR
- QUIET HOURS
- FLASH QUEUE
- CAMPS INFORMATION FILE
- CAMPS De RI
- STATISTICS RINT
3.2.12.2 P̲r̲i̲n̲t̲/̲P̲u̲n̲c̲h̲ ̲P̲a̲r̲a̲m̲e̲t̲e̲r̲ ̲C̲o̲n̲t̲r̲o̲l̲ (PPPC)
PRINT/PUNCH PARAMETER CONTROL is part of the system
parameter control.
This section enables you to:
- Specify the number of ines per page and between
pages for the printers.
- Specify how many seconds a message must be delayed
before writing out must take place.
In the format, you can jump forward or backward by
moving the cursor to the desirable entries.
After va
