top - download
⟦37393bc82⟧ Wang Wps File
Length: 11396 (0x2c84)
Types: Wang Wps File
Notes: ACCESS
Names: »3155A «
Derivation
└─⟦67e26c09b⟧ Bits:30006222 8" Wang WCS floppy, CR 0244A
└─ ⟦this⟧ »3155A «
WangText
1982-12-14 ALF/amn
to: S G C/George Brazel, VP Marketing
fm: Christian Rovsing A/S
A.L. Friedman
Subject: ACCESS : RFQ FOR
1. VIDEO COPIER
2. VDU
3. Color Graphic Display Unit (CGDU)
4. Letter Quality Printer
Following our telephone conversation of the 13th December, which
I found most informative and helpful, SGC is invited to submit
a quotation for supplyof the above listed items in accordance
with the specifications and conditions given below.
1. general technical requirements (ACCESS RFP)
-------------------------------------------
1.1 Video Copier (SGC ref. T 5122)
The Video Copier shall reproduce on paper, monocolor
images created on the color graphics terminals. The
copier must have the following capabilities:
1) Each copier shall be connected directly to CGDU.
2) The resolution of the copier shall be at least
100 dots per linear inch.
3) Print at least (five) 5 copies per minute
4) Meet the TEMPEST requirements of NACSIM 5100A
1.2 VDU (sgc ref. t 5140)
1) a) a minimum of 24 lines of 80 characters each
b) a display area of at least 70 square inches
c) a minimum matrix of 7x9, if the dot matrix
character generation technique is used.
d) a cursor symbol that does not obscure any
information (excluding underline).
e) No visible flicker, jitter, or distortion
in display.
f) display easily read in an ambient light of
50 footcandles.
g) non-glare viewing surface.
h) designed so that no moire patterns are generated
by anay device inserted between the CRT and
the operator.
i) highlighting (either reverse video, or different
shade/color, or different intensity, etc.)
under operator and application program control
and available for word, line, or paragraph.
j) brightness control.
k) a programmable audible signal.
l) display the 95-character ASCII subset as
specified in FIPS PUB 15 section 1.
m) selectable, switchable terminal rates of
1200, 2400, 4800, and 9600 bps.
n) Keyboard.
1 separate from the terminal and attached
by cable.
2 generate the 128 character set specified
in FIPS
PUB 1.
3 layout conforming with ansi standar x4.14-1971.
4 repeat function for all keys
6 not less than eight programmable function
keys.
o) cursor and screen control. The following
cursor and and screen controlfunctions must
be provided for both operator and program
control:
1 up, down, right, left, home
2 cursor return to beginning of next line
3 clear screen
4 set and reset tab stops in any column
5 set and reset vertical tab stops
6 backspacing with erasing of character
7 clear from cursor position to end of line
8 clear from cursor postion to end of page
p) Paging. access a minimum of 7,680 alphanumeric
characters for display and action as indicated
below.
1) selectively display and transmit by page.
2) insert, delete, clear, and change the 7,680
characters via the terminal keyboard
3) roll the display up and down through the stored
data. as a line of data scrolls off the top or
bottom of the display, the next line of stored
data must be display at the bottom or top of
the display, respectively.
q) meet the TEMPEST requirements of NACSIM 5100a.
1.3 color graphic display unit (sgc ref. t 5127 -
oem 4027)
the cgdu must meet all the requirements of the vdu plus
the following:
a) create and display text and graphic information.
b) a display area of not less than 75 square inches.
c) screen definition of not less than 512 x 476
individually addressable and color definable
pixels.
d) drive the video copier in a slave mode.
e) minimum data rate of 9600 bps.
f) graphics capabilities as listed below:
1 alphanumeric formats in uppper and lower case
in multiple font styles and sizes (displayable
within a single graphics screen image).
2 circles
3 pie charts
4 squares and rectangles
5 bar charts
6 curves
7 vectors
8 line drawing
9 tabular data
10 automatic layout. (take tabulated data and
automatically create the desired chart without
requiring the user to plot or draw the chart
on the terminal).
11 shading patterns
12 stacked or hidden bars
13 precomposed images (logos and maps)
g) edit and randomly move representation on the
screen.
h) basic foreground and background colors of black,
red, green, blue, yellow, magenta, cyan, and
white.
i) eight colors to be represented on the screen
at any one time.
1.4 letter quality printer (sgc ref. t 5162)
(please note that we have not yet received the relevant
rfp amendment)
the following are required:
1. printing
a) a minimum speed of 35 cps.
b) the 95 character subset as specified in fips
pub 15, section 1.
c) use of the control characters designated
by the 128 character set specified in fips
pub 1.
d) a minimum of eighty (80) characters per line
on continuous form paper.
e) single and double spacing under program control
f) lines of both 10 and 12 cpi.
g) print six and eight lines per inch
h) interchangeable character sets including
the fips pub 32, ocr-a size 1.
i) one original plus five legible copies from
carbon interleaved paper.
j) program controlled forms spacing without
using carriage control tapes.
k) interchangeable tractor feeding and manual
single sheet feeding.
l) print descenders
m) interface directly with the system
2) keyboard.
a) layout conforming with ansi standard x 4.14-1971.
b) generate the 128 character set specified
in fips pub 1.
c) repeat function for all keys.
3) meet the tempest requirements of NACSIM 5100a.
2. power input
----------------
the equipment must be able to operate with a power source
of 120/208 volts plus or minus 10 per cent, 60hz plus
or minus 1 per cent, three-phase, four wire system. power
input harmonic distortion requirement must be less than
5 per cent.
3. air conditioning
---------------------
the equipment must be able to operate within a temperature
range of 70 degrees f plus or minus 20 degrees and a relative
himidity between 35 per cent and 95 per cent.
4. reserved
-------------
5. interface
---------------
the interface requirement to the host must be specified.
6. logistics
-------------
6.1 documentation
------------------
6.1.1
the supplier will be requested to submit documentation
to component level, covering only the equipment supplied.
6.1.2
the parts list to component level must include true manufacturer's
part numbers
6.1.3
the documentation standard and quality shall enable reproduction
and the supplier will be requested to grant permission
to reproduce for the purpose of the this program.
6.1.4
the documentation shall include information suitable for
the user, for maintenance at subassembly level, and for
maintenance at component level at depot.
6.1.5
all documentation shall be subject to review and approval
by cr before delivery
6.2 training
-------------
6.2.1
self-study training package or other training documentation
must be supplied as part of the contract.
6.3 serviceability
-------------------
6.3.1
it shall be easy to diagnose and fault-find to module
level. fault shall be identifiable to a single module.
6.3.2
a thorough and easily understandable checking and alibration
procedure must be supplied with the equipment
6.3.3
all nessary special tools and special test instruments
should be listed and unit prices quoted.
6.3.4
a recommended spare parts list must be submitted and a
not-to-exceed cost of a 90 days spare stock quoted.
6.3.5
meantime between failures (mtbf.), meantime to repair
(mttr) as well as down-time must be specified in quotation.
6.3.6
the rspl shall be submitted for site level (module exchange)
and depot level (component repair) and mtbf must be specified
for all subassemblies and components.
6.3.7
the manufacturers configuration management procedures
shall be submitted.
6.3.8
field change notices must be supplied with necessary parts
and with documentation change notices as long as the equipment
exists in the manufacturers product line.
7. general conditions
-----------------------
7.1 delivery schedule to usaf
item 1 july 83+7 mo. 1 jul 83+18 mo. 1 jul 83 + 36
mo.
----------------------------------------------------------
video
copier 10 units 36 0
vdu 137 24 100
cgdu 43 3 140
letter
quality
printer 113 14 140
delivery to Christian Rovsing A/S 3 months before delivery
to usaf.
7.2 terms of delivery:
delivery shall be made cif (cost incl. freight) to cr's
facility in ballerup, (copenhagen), denmark.
delivery charges should be quoted separately.
7.3 origin
bidder shall specify equipment country of origin
7.4 packing
packaging shall be for air, sea, and land transportation
to best commercial pactice.
containers which can be used for re-export are required.
bidder is asked to specify his packaging method.
7.5 warrenty
except as otherwise provided in this clause, the bidder
warrants that all items to be delivered shall be fit and
sufficient for the purpose intended, as stated in the
specifications, new, merchantable, of good material and
workmanship free from defect, and conforming to the specification.
the warranty shall remain in effect for a period of twelve
(12) months after cr's acceptance
7.6 acceptance
acceptance of delivery will be given upon incoming inspection
at cr's facility
7.7 supply guarantee
bidder are requested to ensure the supply of similar units
and spares for a period of 10 year
7.8 quality assurance
bidder are requested to accept source inspection by national
qa authorities in accordance with mil-i-45208a.
7.9 terms of payment
the bidder is requested to base the price quotation on
payment 120 days after delivery to cr's facility
7.10 type of quotation
in light of the access firm fixed price, indefinite delivery,
indefinite quantity contract, the bidder is requested
to provide the prices for the delivery schedule given
in 7.1 with a price variation factor as a function of
quantity and delivery date relative to the nominal schedule
for each item. quotation should include all necessary
or recommended assessories.
7.11 submission of quotation
final quotation should be received by cr no later than
20 dec 1982.
general remarks:
1. intention to quote: please notify by return telex which
items sgc will quote, taking into account the schedule
and the tempest requirement.
2. information to cr: for each item quoted the following
information is requested asap:
a) price (accurate but not necessarily final)
b) dimensions
c) power
d) environmental requirements
e) weight
f) mtbf
g) spare parts info
h) training/self-instruction(description)
i) documentation(available)
3. means of transmittal
a) telex 35111 cr dk4373
b) telefax +45 2 654373
c) telephone 45 2 651144 (45: denmark , 2: area code
in dk)
d) full address:
Christian Rovsing A/S
lautrupvang 2
dk-2750 ballerup
denmark
please transmit items in point 2 above by telex/telefax
and full documentation by courier, e.g. dhl.
thank you again for your help. I look forward to a positive
response from sgc.
sincerely yours,
Christian Rovsing A/S
a.l. friedman
