DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦37c59f568⟧ Wang Wps File

    Length: 68053 (0x109d5)
    Types: Wang Wps File
    Notes: CPS/TPR/005               
    Names: »1547A «

Derivation

└─⟦0d10b442a⟧ Bits:30005805 8" Wang WCS floppy, CR 0109A
    └─ ⟦this⟧ »1547A « 

WangText

…02……00……00……00……00…;…02……00……00…;
;…07…:…0e…:…05…9…0b…9…0d…9
9 8…08…8…0d…8…02…8…07…7…08…7…0b…7…00…7 6…08…6…0d…6…01…6…05…5…09…5…0d…5…01…5…05…4…09…4…0e…4…86…1                                             …02…           …02…  
           …02…        

…02…CPS/TPR/005

…02…820419…02……02…
DSMT (PROTOTYPE) HARDWARE TEST SPECIFICATION
AND PROCEDURES…02…811218…02…CAMPS








3.7      T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲7̲



3.7.1    G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲

         The purpose of this test group is to verify basic functional
         capabilities of the CAMPS hardware.

         Functional capabilities to be verified are:

         1.  CPU

         2.  Memory Mapping, MAP

         3.  Memory, RAM

         4.  Disk I/O

         5.  Floppy Disk I/O

         6.  LTU I/O, incl. links to circuits/terminals

         7.  TDX I/O, incl. links to circuits/terminals

         8.  Watchdog functions

         Furthermore the following requirements to system security
         will be verified during the functional tests:

         9.  Power Line Filtering (SRS sec. 3.4.5.1.o)

         10. CPU instruction set  (SRS sec. 3.4.5.7.a.4)

         11. Hardware addressing  (SRS sec. 3.4.5.7.a.7)

         The CAMPS DSMT configuration is given in appendix A.

         The different DSMT communication interfaces will be
         tested as follows:

         a) T̲e̲r̲m̲i̲n̲a̲l̲s̲ ̲(̲o̲p̲t̲o̲ ̲o̲r̲ ̲V̲2̲4̲/̲V̲2̲8̲(̲L̲/̲L̲)̲)̲

             1)  Each Opto link to be tested has a VDU or a
                 MSP connected. The test wil be performed for
                 one 


                 link at a time by sending 20 lines of alphanumeric
                 characters to the VDU/MSP connected. In case
                 of a connected VDU, a command setting the VDU
                 in transmit mode is send to the VDU. The 20
                 lines previously received by the VDU is transmitted
                 back to the DSMT system. Outputdata and inputdata
                 are compared for equality. In case of a connected
                 MSP verification of the transmitted data are
                 performed by visual inspection of the print
                 out.

             2)  L̲o̲w̲ ̲S̲p̲e̲e̲d̲ ̲M̲e̲d̲i̲a̲ ̲i̲n̲t̲e̲r̲f̲a̲c̲e̲ ̲(̲V̲2̲4̲/̲V̲2̲8̲(̲L̲/̲L̲)̲)̲

                 These lines are terminated in the V24 Filter
                 Box. Each of the links are tested one at a
                 time using a TEST VDU which is connected to
                 the actual plug in the filter box. 20 lines
                 of alphanumeric characters are send to the
                 TEST VDU connected. A command setting the TEST
                 VDU in transmit mode is outputted. The 20 lines
                 previously received by the TEST VDU is transmitted
                 back to the DSMT system. Outputdata and inputdata
                 are compared for equality.

             3)  P̲T̲R̲/̲P̲T̲P̲ ̲i̲n̲t̲e̲r̲f̲a̲c̲e̲ ̲(̲V̲2̲4̲/̲V̲2̲8̲(̲L̲/̲L̲)̲)̲

                 A PTR/PTP is connected to the actual plug in
                 the V24 Filter Box. The test includes output
                 of 20 lines of alphanumeric characters which
                 shall be punched. The punched tape is then
                 fed back into the PTR part and send back to
                 the DSMT system. Inputdata are compared to
                 outputdata for equality.

             4)  O̲C̲R̲ ̲i̲n̲t̲e̲r̲f̲a̲c̲e̲ ̲(̲V̲2̲4̲/̲V̲2̲8̲(̲L̲/̲L̲)̲)̲

                 This test requires an OCR (SHAPE supplied).
                 If an OCR is not available at the time of the
                 test, a VDU is used to simulate the OCR. The
                 test is run by inputting data from the connected
                 OCR/VDU and printing the received data on the
                 OC. Thus verification is based upon visual
                 inspection of the OC print out.


         b)  E̲x̲t̲e̲r̲n̲a̲l̲ ̲C̲i̲r̲c̲u̲i̲t̲s̲ ̲(̲V̲2̲4̲/̲V̲2̲8̲(̲L̲/̲L̲)̲)̲

             1)  A̲C̲C̲I̲S̲/̲S̲C̲A̲R̲S̲I̲I̲ ̲i̲n̲t̲e̲r̲f̲a̲c̲e̲

                 These lines are terminated in the V24 Filter
                 Box. Each of the links are tested one at a
                 time using a TEST VDU which is connected to
                 the actual plug in the filter box. 20 lines
                 of alphanumeric characters are send to the
                 TEST VDU connected. A command setting the TEST
                 VDU in transmit mode is outputted. The 20 lines
                 previously received by the TEST VDU is transmitted
                 back to the DSMT system. Outputdata and inputdata
                 are compared for equality.

             2)  T̲A̲R̲E̲ ̲i̲n̲t̲e̲r̲f̲a̲c̲e̲

                 These lines are terminated in the V24 Filter
                 Box.
                 Two testconfigurations are defined for this
                 test:
                 TEST EQUIPMENT 1 consists of a TEST VDU and
                 a CRYPTO/MODEM link (The CRYPTO is SHAPE supplied)
                 and will be used during the test if the CRYPTO
                 is available at the time of the test. Loading
                 of CRYPTO key(s) and verification of the CRYPTO
                 equipment prior to integration with the DSMT
                 equipment and TEST VDU is a SHAPE responsibility.
                 TEST EQUIPMENT 2 is a TEST VDU and will be
                 used during the test if the CRYPTO equipment
                 is unavailable at the time of the test. 20
                 lines of alphanumeric characters are send to
                 the TESTCONFIGURATION connected. A command
                 setting the TESTCONFIGURATION in transmit mode
                 is outputted. The 20 lines previously received
                 by the TESTCONFIGURATION is transmitted back
                 to the DSMT system. Outputdata and inputdata
                 are compared for equality.


3.7.2    V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲C̲r̲o̲s̲s̲ ̲R̲e̲f̲e̲r̲e̲n̲c̲e̲ ̲I̲n̲d̲e̲x̲ ̲(̲V̲C̲R̲I̲)̲

         The VCRI, table 3.7.2-1, identifies functional capabilities
         to be verified along with the verification method.



 REQUIREMENT                               VERIFICATION
                                          METHOD

                                          N/A  EXAM.
                                                      ANAL.
                                                             TEST
 ----------------------------------------------------------------

 F FUNCTIONAL CAPABILITIES
   F.1 PU#1/CU/TDX#1 FUNCTIONAL TEST
     F.1.1  CPU#0/#1/#2 Test                                 X
     F.1.2  MAP/MIA Test                                     X
     F.1.3  RAM Test                                         X
     F.1.4  Disk Ctrl/DCA/Disk#1/#2/
            #3/ Test                                         X
     F.1.5  LTU/LIA-N/LINK#1/#2/#3/#4
            Test                                             X
     F.1.6  Floppy Ctrl/SFA/Floppy Disk
            Test                                             X
     F.1.7  STI/TIA#1/TIA#2 Test                             X
     F.1.8  TDX Ctrl#1 Test                                  X
     F.1.9  BSM-X Test                                       X
     F.1.10 LTUX-S Test                                      X

   F.2 PU#2/CU/TDX#2 FUNCTIONAL TEST
     F.2.1  CPU#0/#1/#2 Test                                 X
     F.2.2  MAP/MIA Test                                     X
     F.2.3  RAM Test                                         X
     F.2.4  Disk Ctrl/DCA/Disk#1/#2/
            #3/ Test                                         X
     F.2.5  LTU/LIA-N/LINK#1/#2/#3/#4
            Test                                             X
     F.2.6  Floppy Ctrl/SFA/Floppy Disk
            Test                                             X
     F.2.7  STI/TIA#1/TIA#2 Test                             X
     F.2.8  TDX Ctrl#2 Test                                  X
     F.2.9  BSM-X Test                                       X
     F.2.10  LTUX-S Test

   F.3 WDP FUNCTIONAL TEST                                   X
     F.3.1  LTU/WCA Test                                     X
     F.3.2  CCA Test                                         X
     F.3.3  BSM-X Test                                       X
     F.3.4  CUCP Test                                        X
     F.3.5  CCBA Test                                        X

                  TABLE 3.7.2-1



3.7.3    R̲e̲f̲e̲r̲e̲n̲c̲e̲d̲ ̲D̲o̲c̲u̲m̲e̲n̲t̲s̲

         1.          CAMPS System Requirement Specification
                     CPS/210/SYS/0001

         2.          CAMPS System Design Specification CPS/SDS/001

         3.          CPU test program product specification

         4.          MAP test program product specification

         5.          RAM test program product specification

         6.          Disk/Floppy Disk/LTU/TDX test program product
                     specification

         7.          Watchdog system software Product specification
                     CSS-MIC/0420/PSP/1010



3.7.4    T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲s̲



3.7.4.1  T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲ ̲1̲

         This testprocedure serves to verify functional capabilities
         of PU#1, the associated part of the CU and the connected
         TDX#1 system as identified in the VCRI. The DSMT configuration
         under test is given in appendix A.



3.7.4.1.1    T̲e̲s̲t̲ ̲S̲e̲t̲ ̲U̲p̲

         One copy of the documents mentioned in sec 3.7.3 must
         be present in the testroom. 

         The test is performed via an Operator Console (OC)
         which is a printer and keyboard.

         The OC is connected to the system as follows:

             1.  Substitute the leftmost OPTO transceiver in
                 the rack C Adapter crate with a V24/V28(L/L)
                 adapter (1 channel), and connect the OC to
                 the V24 connector on the front panel of the
                 adaptor.

             2.  Remove the two V24 cables from J1 and J4 located
                 on the front panel of the WCA (rear crate of
                 the Watchdog Processor crate).

             3.  Connect the two V24 cables via a short extension
                 cable.

         The OC is now connected to the V24 port on the MIA
         in the rear crate of PU#1 (ref. fig. 3.7.4.1.1-1).

         Carry out/control the following:

         a)  OC Set up:

             The communication part of the OC is set to:

             1)  Asynchronous communication
             2)  7 bit character length
             3)  Even parity check/generation
             4)  1 stop bit
             5)  1200 Baud communication speed
















































                    FIGURE 3.7.4.1.1-1

            C̲o̲n̲n̲e̲c̲t̲i̲o̲n̲ ̲o̲f̲ ̲t̲h̲e̲ ̲O̲p̲e̲r̲a̲t̲o̲r̲ ̲C̲o̲n̲s̲o̲l̲e̲



         b)  Switch settings in PU#1 and PU#2 front crate modules:

             1)  The NRM/MAIN switch on the MAP module front
                 panel is set to NRM.

             2)  The EN/DIS switch on the MAP module front panel
                 is set to EN.

         c)  Switch settings in PU#1 and PU#2 rear crate modules:

             1)  The Baudrate select switches 1-4 (S1) on the
                 MAP Interface Adapter (MIA) Printed Circuit
                 Board (PCB) is set to #7 which corresponds
                 to a transmission speed of 1200 Baud:

                 Switch 1:  OPEN
                 Switch 2:  OPEN
                 Switch 3:  OPEN
                 Switch 4:  CLOSED

             2)  The EN/DIS switch on the Configuration Control
                 Adaptor (CCA) front panel is set to DIS.

         d)  Switch settings in CU front crate modules:

             1)  Switches on the Channel Unit Control Panel
                 (CUCP) front panel is set as:

                 a)  The CU Bus A Switch DIS/AUTO is set to
                     AUTO

                 b)  The CU Bus B switch DIS/AUTO is set to
                     AUTO

                 c)  The Disk Ctrl. No. 1 switch AAEN/AUTO/BAEN
                     is set to AUTO



                 d)  The Disk Ctrl. No. 2 switch AAEN/AUTO/BAEN
                     is set to AUTO

                 e)  The Disk Ctrl. No. 3 switch AAEN/AUTO/BAEN
                     is set to AUTO

                 f)  The LTU No. 1 switch AAEN/AUTO/BAEN is
                     set to AUTO

                 g)  The LTU No. 2 switch AAEN/AUTO/BAEN is
                     set to AUTO

                 h)  The LTU No. 3 switch AAEN/AUTO/BAEN is
                     set to AUTO

                 i)  The LTU No. 4 switch AAEN/AUTO/BAEN is
                     set to AUTO

                 k)  The LTU No. 5 switch AAEN/AUTO/BAEN is
                     set to AUTO

                 l)  The SD.FD.CTRL switch AAEN/AUTO/BAEN is
                     set to AUTO

         e)  Switch settings in CU rear crate modules:

             1)  The EN/DIS switch on the CCA module front panel
                 is set to DIS

         f)  Switch settings in TU modules

             1)  All BSM-Xs:

                 a)  The AUTO/MAN/OFF switch is set to MAN

                 b)  The BUS 1/Bus 2 switch is set to BUS 1.

             2)  All LTUX-Ss:

                 a)  The CH 1 switch ON/OFF is set to ON

                 b)  The CH 2 switch ON/OFF is set to ON

                 c)  The CH 3 switch ON/OFF is set to ON

                 d)  The CH 4 switch ON/OFF is set to ON

         g)  Switch settings on frequency stabilizer rack:



             1)  The input power switch on all three stabilizers
                 are set to off.

             2)  The three rotary switches on the By-Pass panel
                 are all set to the Frequency Stabilizer position.

         h)  Setting of power switches in Computer racks:

             1)  Power switch (2) on each Mains switch is set
                 to OFF.

             2)  Power switch (2) on the Disk Drive rear panel
                 is set to "ON"

             3)  Power switch (1) on the Floppy Disk Drive rear
                 panel is set to "ON".

             4)  Power switch (1) on the Watchdog Processor
                 Unit rear panel is set to "OFF".

             5)  Power switch (2) in the rear crate of PU#1
                 is set to "ON"

             6)  Power switch (2) in the rear crate of the CU
                 is set to "ON"

             7)  Power switch (2) in the rear crate of the PU#2
                 is set to "ON".

             8)  Power switch (2) in the rear panel of each
                 80D fan unit is set to "ON".

             9)  Power switch (2) in the rear crate of the Adaptor
                 Crate is set to "ON"

             10) Power switch (1) in the rear panel of the 80S
                 Blower Unit is set to "ON"

             11) Power switch (1) on each CR80D Power supply
                 (6 front crate mounted modules) is set to "ON".

         i)  Setting of Power Switche in Line Termination racks:

             1)  Power Switch (2) on each Mains Switch is set
                 to "OFF".



             2)  Power Switch (1) on the rear panel of each
                 80S Blower Unit is set to "ON".

             3)  Power Switch (2) in the rear crate of each
                 TU is set to "ON".

             4)  Power Switch (1) on each CR80S Power Supply
                 (1 in the front crate of each TU) is set to
                 "ON".


3.7.4.1.2    T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲

         The testengineers and testwitnesses are in the testroom
         and ready to perform and supervise the test.

         Power Up the DSMT System as follows (Refer to appendix
         A):

         a)  Power Up all connected terminals i.e. VDUs, MSPs,
             OC, PTP/PTR, OCR as applicable.

         b)  The input Power Switch on the front panel of each
             Frequency Stabilizer is set to "ON".

         c)  The power switch (2) on Mains switch no. 1 is set
             to "ON" wait 15 secs.

         d)  The power switch (2) on each of the remaining Mains
             Switche is set to "ON".

         e)  Mount a Disk Pack with the DSMT test software in
             Disk Drive no. 2, close the lid and push the drive
             back in rack B.

         f)  Activate "START" push button on Disk Drive No.
             2 and wait until the "READY" indicator stays "ON".

         g)  Insert a scratch Floppy Disk in each of the two
             drives in the Floppy Disk drive of rack B, and
             close the lids.


3.7.4.1.3    T̲e̲s̲t̲ ̲S̲t̲e̲p̲s̲

         The teststeps for testgroup no. 7, testprocedure no.
         1 (7/1), is given in the following preceded by a testoverview.




T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲7̲/̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲C̲a̲p̲a̲b̲i̲l̲i̲t̲i̲e̲s̲                                 
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1.               CPU test                      N/A

2.               MAP test                      N/A

3.               RAM test                      N/A

4.               Disk/Floppy Disk/LTU/TDX      N/A
                 test

All              Power line filtering          sec. 3.4.5.1.o

All              CPU instruction set           sec. 3.4.5.7.a.4

All              Hardware addressing           sec. 3.4.5.7.a.7




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1      OC          Examine printout on OC    Refer to Appendix
                                               D sec. 1.1

1.2      OC          Boot the CPU test pro-
                     gram as follows:

                     Enter from the OC:
                     BA(SP)1025(CR)
                     BM(SP)140(CR)
                     BT(SP)SMD80(CR)
                     BE(SP)#Bfd no.(CR)        Refer to Appendix
                                               D sec. 1.2

1.3      OC          Enter from the OC
                     REPORTLEVEL(SP)=(SP)0(CR)
                     TEST(SP)CPU(SP)0(SP)1(SP)
                     2(CR)                     Refer to Appendix
                                               D section 1.3.

1.4      OC          Quit the CPU test by en-
                     tering from the OC:
                     QUIT(CR)                  Refer to Appendix
                                               D section 1.4





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

2.1      OC          Boot the MAP test pro-
                     gram as follows:

                     Enter from the OC:
                     BE(SP)#Bfd no.(CR)        Refer to Appendix
                                               D sec. 2.1

2.2      OC          Enter from the OC:

                     REPORTLEVEL(SP)=(SP)0(CR)
                     TEST(SP)ALL(CR)           Refer to Appendix
                                               D section 2.2

2.3      OC          Quit the MAP test by en-
                     tering from the OC:
                     QUIT(CR)                  Refer to Appendix
                                               D section 2.3












 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲3̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

3.1      OC          Boot the RAM test pro-
                     gram as follows:

                     Enter from the OC:
                     BE(SP)#Bfd no.(CR)        Refer to Appendix
                                               D sec. 3.1

3.2      OC          Enter from the OC:

                     REPORTLEVEL(SP)=(SP)0(CR)
                     TEST ALL(TBD)(CR)         Refer to Appendix
                                               D section 3.2

3.3      OC          Quit the RAM test by en-
                     tering from the OC:
                     QUIT(CR)                  Refer to Appendix
                                               D section 3.3












 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.1      OC          Boot the Disk/Floppy
                     Disk/LTU/TDX  test pro-
                     gram as follows:

                     Enter from the OC:
                     BE(SP)#Bfd no.(CR)        Refer to Appendix
                                               D
                                               sec. 4.1

4.2      N/A         Depress the "START"       N/A.
                     pushbutton on disk
                     drive #2 and wait un-
                     til the "START"and
                     "READY" indicators are
                     "OFF". Replace the test
                     software disk pack in
                     Disk Drive # 2 with a
                     scratch disk pack.
                     Push the drive back
                     into rack B.
                     Activate the "START"
                     pushbutton on Drive #2
                     and wait until the
                     "READY"indicator stays
                     "ON".




 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.3      OC          Activate the Disk test
                     as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.2
                     ment(CR)
                     (Appendix C, sec. 2.1)

4.4      OC          Activate the Floppy
                     Disk test as fol-
                     lows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.3
                     ment(CR)
                     (Appendix C, sec. 2.2)












 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.5      N/A         Connect the TEST VDU      N/A
                     to J30 in the V24 fil-
                     ter box.

4.6      OC          Activate the LTU#1
                     channel 1 test as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.4
                     ment(CR)
                     (Appendix C, sec. 3.1)

















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.7      N/A         Connect the TEST VDU      N/A
                     to J31 in the V24 fil-
                     ter box.

4.8      OC          Activate the LTU#2
                     channel 1 test as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.5
                     ment(CR)
                     (Appendix C, sec. 3.2)

















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.9      N/A         Connect the available     N/A
                     testconfiguration
                     to J26 in the V24 fil-
                     ter box.

4.10     OC          Activate the LTU#3
                     channel 1 test as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.6
                     ment(CR)
                     (Appendix C, sec. 3.3)
















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.11     N/A         Connect the available     N/A
                     testconfiguration
                     to J27 in the V24 fil-
                     ter box.

4.12     OC          Activate the LTU#3
                     channel 2 test as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.7
                     ment(CR)
                     (Appendix C, sec. 3.4)
















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.13     N/A         Connect the available     N/A
                     testconfiguration
                     to J28 in the V24 fil-
                     ter box.

4.14     OC          Activate the LTU#4
                     channel 1 test as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.8
                     ment(CR)
                     (Appendix C, sec. 3.5)
















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.15     N/A         Connect the available     N/A
                     testconfiguration
                     to J29 in the V24 fil-
                     ter box.

4.16     OC          Activate the LTU#4
                     channel 2 test as follows:

                     Enter from the OC:        Refer to Appendix
                                               D
                     DO #page.displace-        sec. 4.9
                     ment(CR)
                     (Appendix C, sec. 3.6)

4.17     N/A         Remove the test confi-    N/A
                     guration from J29 in
                     the V24 filter box.












 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.17     OC          Activate the link 111
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.3a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 111 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.3b)   dix D, sec. 4.10

4.18     OC          Activate the link 112
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.4a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 112 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.4b)   dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.19     OC          Activate the link 113
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.5a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 113 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.5b)   dix D, sec. 4.10

4.20     OC          Activate the link 114
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.6a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 114 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.6b)   dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.21     OC          Activate the link 121
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.7a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 121 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.7b)   dix D, sec. 4.10

4.22     OC          Activate the link 122
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.8a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 122 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.8b)   dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.23     OC          Activate the link 123
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.9a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 123 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.9b)   dix D, sec. 4.10

4.24     OC          Activate the link 124
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.10a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 124 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.10b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.25     OC          Activate the link 211
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.11a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 211 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.11b)  dix D, sec. 4.10

4.26     OC          Activate the link 212
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.12a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 212 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.12b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.27     OC          Activate the link 213
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.13a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 213 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.13b)  dix D, sec. 4.10

4.28     OC          Activate the link 214
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.14a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 214 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.14b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.29     OC          Activate the link 221
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.15a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 221 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.15b)  dix D, sec. 4.10

4.30     OC          Activate the link 222
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.16a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 222 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.16b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.31     OC          Activate the link 223
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.17a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 223 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.17b)  dix D, sec. 4.10

4.32     OC          Activate the link 224
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.18a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 224 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.18b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.33     OC          Activate the link 411
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.23a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 411 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.23b)  dix D, sec. 4.10

4.34     OC          Activate the link 412
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.24a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 412 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.24b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.35     OC          Activate the link 413
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.25a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 413 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.25b)  dix D, sec. 4.10

4.36     OC          Activate the link 414
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.26a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 414 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.26b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.37     OC          Activate the link 421
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.27a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 421 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.27b)  dix D, sec. 4.10

4.38     OC          Activate the link 422
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.28a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 422 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.28b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.39     OC          Activate the link 423
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.29a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 423 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.29b)  dix D, sec. 4.10

4.40     OC          Activate the link 424
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.30a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 424 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.30b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.41     OC          Activate the link 511
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.31a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 511 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.31b)  dix D, sec. 4.10

4.42     OC          Activate the link 512
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.32a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 512 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.32b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.43     OC          Activate the link 513
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.33a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 513 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.33b)  dix D, sec. 4.10

4.44     OC          Activate the link 514
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.34a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 514 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.34b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.45     OC          Activate the link 521
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.35a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 521 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.35b)  dix D, sec. 4.10

4.46     OC          Activate the link 522
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.36a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 522 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.36b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.47     OC          Activate the link 523
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.37a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    VDU 523 display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.37b)  dix D, sec. 4.10

4.48     OC          Activate the link 524
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.38a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.2)    MSP 524 print
                                               out as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.38b)  dix D, sec. 4.10





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.49     N/A         Connect the TEST VDU
                     (V24 I/F) to J1 in
                     the V24 filter box        N/A

4.50     OC          Activate the link 311
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.19a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.19b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.51     N/A         Connect the TEST VDU
                     (V24 I/F) to J2 in
                     the V24 filter box        N/A

4.52     OC          Activate the link 312
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.20a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.20b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.53     N/A         Connect the TEST VDU
                     (V24 I/F) to J3 in
                     the V24 filter box        N/A

4.54     OC          Activate the link 313
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.21a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.21b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.55     N/A         Connect the TEST VDU
                     (V24 I/F) to J4 in
                     the V24 filter box        N/A

4.56     OC          Activate the link 314
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.22a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.22b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.57     N/A         Connect the TEST VDU
                     (V24 I/F) to J5 in
                     the V24 filter box        N/A

4.58     OC          Activate the link 611
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.39a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.39b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.59     N/A         Connect the TEST VDU
                     (V24 I/F) to J6 in
                     the V24 filter box        N/A

4.60     OC          Activate the link 612
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.40a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.40b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.61     N/A         Connect the TEST VDU
                     (V24 I/F) to J7 in
                     the V24 filter box        N/A

4.62     OC          Activate the link 613
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.41a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.41b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.63     N/A         Connect the TEST VDU
                     (V24 I/F) to J8 in
                     the V24 filter box        N/A

4.64     OC          Activate the link 614
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.42a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.42b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.65     N/A         Connect the TEST VDU
                     (V24 I/F) to J9 in
                     the V24 filter box        N/A

4.66     OC          Activate the link 711
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.43a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.43b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.67     N/A         Connect the TEST VDU
                     (V24 I/F) to J10 in
                     the V24 filter box        N/A

4.68     OC          Activate the link 712
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.44a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.44b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.69     N/A         Connect the TEST VDU
                     (V24 I/F) to J11 in
                     the V24 filter box        N/A

4.70     OC          Activate the link 713
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.45a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.45b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.71     N/A         Connect the TEST VDU
                     (V24 I/F) to J12 in
                     the V24 filter box        N/A

4.72     OC          Activate the link 714
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.46a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.46b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.73     N/A         Connect the TEST VDU
                     (V24 I/F) to J13 in
                     the V24 filter box        N/A

4.74     OC          Activate the link 811
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.47a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.47b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.75     N/A         Connect the TEST VDU
                     (V24 I/F) to J14 in
                     the V24 filter box        N/A

4.76     OC          Activate the link 812
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.48a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.48b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.77     N/A         Connect the TEST VDU
                     (V24 I/F) to J15 in
                     the V24 filter box        N/A

4.78     OC          Activate the link 813
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.49a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.49b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.79     N/A         Connect the TEST VDU
                     (V24 I/F) to J16 in
                     the V24 filter box        N/A

4.80     OC          Activate the link 814
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.50a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.50b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.81     N/A         Connect the TEST VDU
                     (V24 I/F) to J17 in
                     the V24 filter box        N/A

4.82     OC          Activate the link 911
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.51a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.51b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.83     N/A         Connect the TEST VDU
                     (V24 I/F) to J18 in
                     the V24 filter box        N/A

4.84     OC          Activate the link 912
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.52a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.52b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.85     N/A         Connect the TEST VDU
                     (V24 I/F) to J19 in
                     the V24 filter box        N/A

4.86     OC          Activate the link 913
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.53a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.53b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.87     N/A         Connect the TEST VDU
                     (V24 I/F) to J20 in
                     the V24 filter box        N/A

4.88     OC          Activate the link 914
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.54a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.54b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.89     N/A         Connect the TEST VDU
                     (V24 I/F) to J21 in
                     the V24 filter box        N/A

4.90     OC          Activate the link 921
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.55a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.55b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.91     N/A         Connect the TEST VDU
                     (V24 I/F) to J22 in
                     the V24 filter box        N/A

4.92     OC          Activate the link 922
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.56a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.56b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.93     N/A         Connect the TEST VDU
                     (V24 I/F) to J23 in
                     the V24 filter box        N/A

4.94     OC          Activate the link 923
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.57a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.57b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.95     N/A         Connect the TEST VDU
                     (V24 I/F) to J24 in
                     the V24 filter box        N/A

4.96     OC          Activate the link 924
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.58a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.58b)  dix D, sec. 4.10













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.97     N/A         Connect the PTP/PTR
                     (V24 I/F) to J25 in
                     the V24 filter box        N/A

4.98     OC          Activate the link A11
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:        A peace of tape
                                               is
                     DO #page displacement(CR) punched. Tear
                                               it off
                     (Appendix C, sec. 5.1)    and feed it into
                                               the
                                               reader.OC print
                                               out
                                               as specified
                                               in appen
                                               dix D sec. B.4.10














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.99     N/A         If the OCR is unavailable
                     then proceed from step
                     4.102 else continue from
                     4.100.

4.100    N/A         Connect the OCR to J32
                     in the V24 filterbox      N/A

4.101    OC          Activate the link A21
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:        OC print out
                                               in con-
                     DO #page.displace-        formance with
                                               the OCR
                     ment(CR)                  input.
                     (Appendix C, sec. 5.2)

                     Proceed from step 4.104.










 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲7̲/̲1̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲#̲1̲/̲C̲U̲/̲T̲D̲X̲#̲1̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲T̲e̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲S̲e̲c̲s̲.̲ ̲3̲.̲4̲.̲5̲.̲1̲.̲o̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲4̲,̲ ̲3̲.̲4̲.̲5̲.̲7̲.̲a̲.̲7̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.102    N/A         Connect the TEST VDU to
                     J32 in the V24 filterbox  N/A

4.103    OC          Activate the link A21
                     LTUX-S test as fol-
                     lows:

                     Enter from the OC:
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.59a)
                     DO #page.displacement(CR)
                     (Appendix C, sec. 4.1)    TEST VDU display
                                               as
                     DO #page.displacement(CR) specified in
                                               appen-
                     (Appendix C, sec. 4.59b)  dix D, sec. 4.10

4.104    OC          Quit the test by
                     entering from the OC:
                     QUIT(CR)                  Ref. to Appendix
                                               D sec. 4.11

4.105    N/A         Remove the TEST VDU
                     from J32 in the fil-
                     ter box.                  N/A





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR


3.7.4.1.4            T̲e̲s̲t̲ ̲T̲e̲r̲m̲i̲n̲a̲t̲i̲o̲n̲

         Power Down the DSMT system as Follows:

         a)          Depress "START" push button on Disk Drive
                     # 2 and wait until he "START" and "READY"
                     indicators are "OFF".

         b)          Remove the Disk Pack from Disk Drive #
                     2, close the lid and push the drive back
                     in rack B

         c)          The two scratch Floppy Disks are removed
                     from the Floppy Disk drive in rack C. Close
                     the lids.

         d)          The Power Switch (2) on each Mains Switch
                     is set to "OFF".

         e)          The input power switch on each Frequency
                     Stabilizer is set to "OFF"

         f)          Power Down all connected Terminals i.e.
                     VDUs, MSPs, OC, PTP/PTR, as applicable.

         g)          Disconnect the OC from the leftmost V24/V28(L/L)
                     adaptor in the Adaptor crate of rack C,
                     and replace this adaptor with the originally
                     mounted OPTO transceiver.

         h)          Disconnect the two V24 cables (at the WDP
                     rear crate), remove the short extension
                     cable and reconnect the two cables to J1
                     and J4 respectively.