DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦3a8352b9b⟧ Wang Wps File

    Length: 18846 (0x499e)
    Types: Wang Wps File
    Notes: CPS/TPR/008               
    Names: »1286A «

Derivation

└─⟦12f38d4ad⟧ Bits:30006052 8" Wang WCS floppy, CR 0081A
    └─ ⟦this⟧ »1286A « 

WangText

…00……00……00……00……00…0…02……00……00…0
0…07…/…0b…/…0f…/ .…86…1                                             …02…           …02…   …02…        

…02…CPS/TPR/008

…02…840615…02……02…
FUNCTIONAL SOFTWARE TEST SPECIFICATION 
AND PROCEDURES…02…ISSUE 1.1…02…CAMPS









T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲2̲7̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲,̲ ̲S̲T̲N̲.̲ ̲I̲D̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

27.1     VDU MSB     #COMMAND# RELU
                     #ENTER#                   Display of screen
                                               
                     B#ENTER#                  format RELU-B

27.2     VDU MSB     Select from the results
                     of test case 26 a set
                     of TOC, STN. ID that
                     corresponds to exactly
                     one message.  Enter
                     these values #ENTER#      Display of the
                                               message

27.3     VDU MSB     Repeat step no. 27.1
                     and 27.2 but so that
                     no messages fit.          Item not found.














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲2̲8̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲-̲W̲D̲,̲ ̲S̲T̲N̲-̲I̲D̲,̲
 ̲S̲T̲N̲.̲ ̲S̲E̲R̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

28.1     VDU MSB     #COMMAND# RELU
                     B#ENTER#                  Display of screen
                                               format RELU-B

28.2     VDU MSB     Select from the results
                     of case 26 a set of TOC,
                     TOC-WD, STN. ID and STN.
                     SER corresponding to one
                     message. Enter these
                     values #ENTER#            Display of the
                                               message.

28.3     VDU MSB     Enter a set that does
                     not correspond to a
                     message #ENTER#           Item not found.













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲2̲9̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲,̲ ̲S̲T̲N̲-̲I̲D̲,̲ ̲S̲T̲N̲.̲
 ̲S̲E̲R̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

29.1     VDU MSB     #COMMAND# RELU
                     B#ENTER#                  Display of screen
                                               format RELU-B

29.2     VDU MSB     Proceed as for test
                     case 28 but by using
                     TOC instead of TOC +
                     TOC-WINDOW




















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲3̲0̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲-̲W̲D̲,̲ ̲S̲T̲N̲-̲I̲D̲,̲
 ̲T̲O̲F̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

30.1     VDU MSB     #COMMAND# RELU
                     B#ENTER#                  Display of screen
                                               format RELU-B

30.2     VDU MSB     Select from the results
                     of test no. 1 and 26 a
                     set of TOC, TOC-WD, STN.
                     ID and TOF.  The set shall
                     correspond to exactly one
                     message.  Enter the values
                     #ENTER#                   Display of the
                                               message

30.3     VDU MSB     Repeat steps 30.1 and 30.2
                     but with a set that
                     corresponds to several
                     messages (if possible)    Display of Transmission
                                               Catalogue

30.4     VDU MSB     Repeat steps 30.1 and 30.2
                     but with a set that does not
                     correspond with any message.
                                               Item not found.






 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲3̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲,̲ ̲S̲T̲N̲-̲I̲D̲,̲ ̲T̲O̲F̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

31.1     VDU MSB     #COMMAND# RELU
                     B#ENTER#                  Display of screen
                                               format RELU-B

31.2     VDU MSB     Proceed as for test
                     case 30 but by using
                     TOC instead of TOC +
                     TOC-WINDOW




















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲3̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲-̲W̲D̲,̲ ̲S̲T̲N̲-̲I̲D̲,̲
 ̲S̲T̲N̲.̲ ̲S̲E̲R̲,̲
         T̲O̲F̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

32.1     VDU MSB     #COMMAND# RELU
                     B#ENTER#                  Display of screen
                                               format RELU-B

32.2     VDU MSB     Select from the results
                     of test case 1, 26 or 28
                     a set of TOC, TOC-WD, 
                     STN. ID, STN. SER and
                     TOF.  The set should be
                     chosen so that it corre-
                     sponds to one message.
                     Enter these values 
                     #ENTER#                   Display of the
                                               message

32.3     VDU MSB     Repeat steps 32.1 and
                     32.2 but with a set
                     that does not correspond
                     with any message.         Item not found.









 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲0̲/̲a̲)̲2̲-̲3̲3̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲R̲e̲t̲r̲i̲e̲v̲a̲l̲ ̲b̲y̲ ̲S̲u̲p̲e̲r̲v̲i̲s̲o̲r̲,̲ ̲F̲o̲r̲m̲a̲t̲ ̲B̲,̲ ̲T̲O̲C̲-̲W̲D̲,̲ ̲S̲T̲N̲-̲I̲D̲,̲
 ̲S̲T̲N̲.̲ ̲S̲E̲R̲,̲
         T̲O̲F̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲7̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

33.1     VDU MSB     #COMMAND# RELU
                     B#ENTER#                  Display of screen
                                               format RELU-B

33.2     VDU MSB     Proceed as for test
                     case 32 but by using TOC
                     instead of TOC + TOC-WD.




















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR


         T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲1̲0̲/̲b̲

         This test is implemented by Testgroup 10/a.




3.11     T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲1̲1̲



3.11.1   G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲

         This testgroup will give a verification of "Control
         of Record Output"



3.11.2   T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲

         Execution of this Testgroup will consist of an analysis
         of the record output generated during implementation
         of the specified test cases.



3.11.2.1 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲

         Input Data for this testgroup is the input data used
         for the specified test cases.



3.11.2.2 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲

         N.A.



3.11.2.3 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲

         Output os divided into 3 categories:

                     1)                        print out

                     2)                        punched paper
                                               tape

                     3)                        removable storage
                                               media

         Output identification shall be in accordance with the
         SRS para. 3.4.5.2.





3.11.2.4 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲.̲

         N.A.



3.11.3   T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲s̲



3.11.3.1 T̲e̲s̲t̲ ̲S̲e̲t̲-̲u̲p̲



3.11.3.2 T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲

         The specified test cases are executed.



3.11.3.3 T̲e̲s̲t̲ ̲S̲t̲e̲p̲s̲




T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲o̲n̲t̲r̲o̲l̲ ̲o̲f̲ ̲R̲e̲c̲o̲r̲d̲ ̲O̲u̲t̲p̲u̲t̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                Control of Print-Out          3.4.5.2.1

2                Control of Punched Paper      3.4.5.2.2
                 Tape

Ref. 5/b)11      Control of Removable Storage  3.4.5.2.3
                 Media





T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲o̲n̲t̲r̲o̲l̲ ̲o̲f̲ ̲R̲e̲c̲o̲r̲d̲ ̲O̲u̲t̲p̲u̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1      MSP MSM     A security Report is
                     printed out according
                     to test 5/h)1 case 1

1.2                  Control the print-out

2.1                  A message is punched
                     according to test 8/b)4)e
                     case 2.1.

2.2                  Control the papertape.



3.12     T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲1̲2̲



3.12.1   G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲

         This testgroup will give a verification of the CAMPS
         facilities regarding:

         a)  Software Maintenance and modification

         b)  Support Software

             In this testgroup the facilities mentioned in a)
             and b) above are tested for those related to all
             sites.



3.12.2   T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲

         Execution of this testgroup is controlled from the
         supervisor or operator position. Exercise of the above
         facilities can only be done on the off-line part of
         the CAMPS equipment.



3.12.2.1 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲

         Dedicated Terminal Position connected to a LTU.



3.12.2.2.    I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲

         All commands related to the under 3.12.1 listed facilities
         shall be exercised.

         Test halt or interruption can be accomplished by execution
         of the "Cancel" or "Suspend" functions.



3.12.2.3 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲

         VDU and MSP connected to a LTU.




3.12.2.4 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         System status will be displayed on the operators VDU.



3.12.3   T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲s̲



3.12.3.1 T̲e̲s̲t̲ ̲S̲e̲t̲u̲p̲

         CAMPS is booted to normal operational mode in PU#1
         and PU#2 is booted as offline with a software development
         bootmodule.

         A VDU and a MSP are connected to a LTU, which is enabled
         to the B-bus. The development system is opened.







T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲a̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲o̲f̲t̲w̲a̲r̲e̲ ̲M̲a̲i̲n̲t̲e̲n̲a̲n̲c̲e̲ ̲a̲n̲d̲ ̲M̲o̲d̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

7/c              Accommodation of hardware     3.5.11.4

1                Change in data tables




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲1̲2̲/̲a̲)̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲o̲f̲t̲w̲a̲r̲e̲ ̲M̲a̲i̲n̲t̲e̲n̲a̲n̲c̲e̲ ̲a̲n̲d̲ ̲M̲o̲d̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲1̲1̲.̲4̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1      VUD SUP     #COMMAND# OPST
                     "ZZI" #ENTER#             Display of empty
                                               Operating Signal
                                               Table format
                                               apart from specified
                                               MHI.

1.2      VDU SUP     Enter text: Request
                     your acknowledge.

1.3      VDU SUP     Enter CC
                     #ENTER#                   Display of Addressing
                                               Scheme Menu 
















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲u̲p̲p̲o̲r̲t̲ ̲S̲o̲f̲t̲w̲a̲r̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                System Generation             3.5.11.5

2                Debugger

3                Format Generation



























T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲u̲p̲p̲o̲r̲t̲ ̲S̲o̲f̲t̲w̲a̲r̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                EDIT Utility                  3.5.11.5

2                PARAM Utility

3                SWELL Compiler

4                LINK Utility

5                COPY Utility

6                PRINT Utility

7                RESOURCE Correction

8                BOOTGEN Utility

9                DEBUG Utility















T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                     T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲y̲s̲t̲e̲m̲ ̲G̲e̲n̲e̲r̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1         VDU OP    Assign the LTU

1.2         VDU OP    Create the subdevices
                      TERM0 and LP000

1.3         VDU OP    Start PRINTER ̲TASK

1.4         TERM0     LOGIN KJU

1.5         TERM0     USE   SYSGEN.D*TOS.D

1.6         TERM0     EDIT TEMPL1.T            1.Edit a textfile

1.7         TERM0     Delete the line:
                      $ set ̲time

1.8         TERM0     Save the file

1.9         TERM0     QUIT the job

2.1         TERM0     Run the PARAM Utility    1.Procedure of a
                                               SWELL source file

3.1         TERM0     Run the SWELL compiler   1.Produce of input
                                               file to LINKER





 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                     T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲y̲s̲t̲e̲m̲ ̲G̲e̲n̲e̲r̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.1         TERM0     Run the LINK utility     1.Produce of an
                                               object file

5.1         TERM0     Run the COPY utility     1.Produce of an
                                               inputfile for BOOTGEN
                                               utility

6.1         TERM0     PRINT TEMPL1.T           1.TEMPL1.T is printed

7.1         TERM0     RESOURCES FILSYS
                      CONNEC 20                1.Connection resource
                                                 (to FILSYS) is
                                                 increased to 20

8.1         TERM0     Run the BOOTGEN utility  1.BOOTMODULE is
                                               generated 














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲y̲s̲t̲e̲m̲ ̲G̲e̲n̲e̲r̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

8.2         VDU OP    Close development
                      system

8.3         VDU OP    BOOT PU#2 with
                      bootmodule generated
                      in testcase 8.1

                      Verify that the system
                      does not promt for TIME





















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                     T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲D̲e̲b̲u̲g̲g̲e̲r̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1         VDU OP    Start up development
                      system.
                      TEST STEP 1.1-1.4

1.2         TERM0     USE MD

1.3         TERM0     DO RESCMD                1.Change resources

1.4         TERM0     USE USERS.D*KJU.D
                      *DEMO.D

1.5         TERM0     DEBUG                    1.Debugger ready

1.6         TERM0     LOAD DEMO.C              1.KJU000 LOADED

1.7         TERM0     USE OKJU000*DSMT:        1.*

1.8         TERM0     DU 0 P #20               1.Hexdump of the
                                                 first 32(DEC)
                                                 locations in program

1.9         TERM0     BR 0.140                 1.Breakpoint at
                                                 line 140

1.10        TERM0     BR 0.165                 1.Breakpoint at
                                               
                                                 line 165

1.11        TERM0     BR 0.190                 1.Breakpoint at
                                                 line 190

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                     T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲D̲e̲b̲u̲g̲g̲e̲r̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.12        TERM0     BL                       1.List of breakpoint

1.13        TERM0     BO 0.190                 1.Deletion of
                                                 breakpoint

1.14        TERM0     BL

                      Verify that breakpoint
                      in line 190 is deleted

1.15        TERM0     START KJU000             1.Stop at breakpoint

1.16        TERM0     DI R70                   1.Display registers

1.17        TERM0     START KJU000

                      Program asks for input

1.18        TERM0     Enter: 2(CR)











 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                     T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲D̲e̲b̲u̲g̲g̲e̲r̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.19        TERM0     START KJU000             1.Stop at breakpoint

1.20        TERM0     DI R70                   1.Display registers

1.21        TERM0     START KJU00              1.Program asks for
                                                 input

1.22        TERM0     Break to KJU00 TASKS     1.KJU000 .. RUNNUNG

1.23        TERM0     STOP KJU000

1.24        TERM0     TASKS                    1.KJU000 .. STOPPED

1.25        TERM0     KILL KJU000              1.*

1.26        TERM0     TASKS                    1.*

1.27        TERM0     QUIT                     1.Out of DEBUG

1.28        VDU OP    CLOSE                    1.System Closed










 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR




T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                    T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲3̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲o̲r̲m̲a̲t̲ ̲G̲e̲n̲e̲r̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/
Reference   Action                             SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.          Format Generation                  3.5.11.4







T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                     T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲ ̲1̲2̲/̲b̲)̲3̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲o̲r̲m̲a̲t̲ ̲G̲e̲n̲e̲r̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/  Test
Reference   Station   Action                   SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1         TERM0     USE FORMAT.D

1.2         TERM0     Inspect DISP ̲FIL         1.Comment format
                                               G1

1.3         TERM0     EDIT G1 ̲1 ̲033.E

1.4         TERM0     Delete the second to
                      last line

1.5         TERM0     Run the FORMAT GENERATOR

1.6         TERM0     Inspect DISP ̲FIL

                      Verify that the last local
                      distribution field has been
                      removed














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR