top - download
⟦40da4e46c⟧ Wang Wps File
Length: 21830 (0x5546)
Types: Wang Wps File
Notes: Spelunked
Names: »~ORPHAN45.09«
Derivation
└─⟦61695b6f0⟧ Bits:30006170 8" Wang WCS floppy, CR 0291A
└─ ⟦this⟧ »~ORPHAN45.09«
WangText
3.2.6 Retrieval For Readdressal (READ) (cont'd)
Refer to Figure
3.2.6-7.a.
10 On Keyboard, enter the You must enter the
address. address(es) f the
intended
action addresses.
You must begin with
address indicator
groups (AIGs) or
address groups (AGs),
if any.
By using groups,
you must first enter
the 2- or 3 letter
combination AG/AIG
followed by the
actual address data.
For istance: AIG
5000.
This should be followed
by PLAs and/or PLA
reference number.
11 The TO INFO is an optional
entry item.
If you do not wish to
define this entry, proceed
to step 13.
12 On Keyboard, enter the Refer to Figure
3.2.6-7.b
ADDRESS(es) You can enter the
address(es) of the
intented info addresses.
You must use the
same procedure as
described for action
addresses.
NOTE: If you defines
any info address,
the precedence info
field must be defined
too.
13 Either TO ACTION address
or an INFO address must be
defined.
3.2.6 Retrieval For Readdressal (READ) (cont'd)
14 The EXEMPT is an
optional entry item.
If you do not wish to
define this entry,
proceed to step 16.
15 On Kyboard, enter the Refer to Figure
3.2.6-9.a.
ADDRESS(es). You can define PLAs
and/or PLA reference
number of addresses
to be excluded from
AIG(s) used in the
TO ACTION and TO
INFO LINES.
16 The LOCAL PRINT is Refer to Figure
3.2.6-9.b.
a mandtory entry item. If you enter Yes,
On Keyboard, enter Y(yes) the system will
print out
or N(no). a copy of the readdressal
assignment on the
associated PRINTER.
17 VALIDATION Refer to Figure
3.2.6-10.a.
On Keyboard, depress the If invalidentry,
ENTER Key and the system an error message
will validate all data number appears in
entries. the left hand margin.
You must correct
your mistake by
entering valid data.
If you need further
error number explanation
proceed to theerror
messages and error
handling section.
When all entries
are valid, the message
will be transmitted
and you will be
presented with the
message handling
menu (MSGH).
3.2.7 Retrieval For Rerun (RERN) (cont'd)
If you have selected
RERN, the RETRIEVAL
KEY A format is
presented on the
VDU screen.
Refer to Figure
3.2.7-1.
This s the only
key type available
for rerun.
NOTE: The retrieval
for rerun will be
displayed in 2 different
formats.
1. Entry of retrieval
data
2. Display of message.
If more than one
message satisfies
the retrieval parameters,
a cataloge with
these messages data
will be displayed.
You can go back
and enter the specific
data for the desired
message.
2a. Display of catalogue.
1 The "entry of retrieval The only difference
for the
data" for Key A is similar two transactios
will be the
to this described during terminal function
field
retrieval for local use which will display
Key A. RETRIEVAL FOR RERUN.
Refer to Figure
3.2.7-1.a.
If you need further
information, proceed
to section 3.2.5.1
Retrival Key Type A.
3.2.7 Retrieval For Rerun (RERN) (cont'd)
2 NOTE: A transmission If you have selected
RERN,
pilot will be automatically retrieved the specific
generated and the spcific message and have
pressed
message sent for rerun. the ENTER Key the
specific message
will be sent for
rerun.
Only messages transmitted
earlier from this
CAMPS site can be
retrieved for rerun.
When rerun is generated
you will be preseted
with the message
handling menu (MSGH).
3.2.8 Retrieval For Redistribution (REDS) (cont'd)
If you have selected
REDS, the RETRIEVAL
KEY C format is
presented on the
VDU screen.
Refer to Figure
3.2.8-1.
This is the only key type available for redistribution.
NOTE: The retrieval
for redistribution
will be displayed
in 3 different formats.
1. Entry of retrieval
data.
2. Display of message.
If more than one
message satisfies
the retreval parameters,
a catalogue with
the data will be
displayed.
You can go back
and enter the specific
data for the desired
message.
2a. Display of catalogue.
3. Display of header
data.
1 The "entry of retrieval The only difference
for he
data" for Key C is similar two transactions
will be the
to this described during terminal function
field
retrieval for local use which will display
RETRIEVAL
Key C. FOR REDIST
If you need further Refer to Figure
3.2.8-1.a.
informatin, proceed
to section 3.2.5.4
Retrieval Key Type C.
3.2.8 Retrieval For Redistribution (REDS) (cont'd)
2 Observe that the system Refer to Figure
3.2.8-3.
outputs a new format If you have selected
on the VDU screen RDS and retrieved
the specific message,
the REDISTRIBUTION
format is presented
on the VDU screen.
3 Observe that the system Refer to Figure
3.2.8-3.a.
outputs an identity in
the field TRANSACTION
ID.
4 NOTE: The system inserts Refer to Figre 3.2.8-3.b.
TIME STAMP and the
ORIGINATING HEADQUARTERS
ID referenced to the
message.
5 Observe that the nominal Refer to Figure
3.2.8-3.c.
distribution list in the
retrieved message will be
presented in the unprotected
SCD fiels.
6 Action/info SCDs (staff cell
designator) are optional
entry items.
If you do not wish to change
some of these entries,
proceed to step 8.
3.2.8 Retrieval For Redistribution (REDS) (cont'd)
7 On Keyboard, do the Refer to Figure
3.2.8-5.a.
changes. You can specify
new SCDs to which
the retrieved message
hall be distributed,
and delete SCDs
from the nominal
distribution.
This redistribution
will not change
the nominal distribution
list.
8 NOTE: Either one action or
one info SCD must be
defined.
9 The LOCAL PRINT is Refer to Figure
3.2.85.b.
a mandatory entry item. If you can enter
yes, the
On Keyboard, enter system will print
out a
Y (yes) or N (no). copy of the redistribution
list on your SUPERVISOR
PRINTER.
10 VALIDATION Refer to Figure
3.2.8-6.a.
On Keyboard, depres If invalid entry,
an
the ENTER Key and the error message number
system will validate all appears in the left
hand
data entries. margin.
You must correct
your mistake by
inserting valid
data.
If you need further
error number explanatin
proceed to the error
messages and error
handling section.
When all entries
are valid, the message
will be redistributed
and you will be
presented with the
message handling
menu (MSGH).
3.2.9 Retrieval For Deletion (REDE) (cont'd)
If you have selected
REDE, the RETRIEVAL
KEY TYPE D format
is presented on
the VDU screen.
Refer to Figure
3.2.9-1.
This is the only key type available for message
deletion.
NOTE: The retrieval
for Deletion will
be displayed in
3 different formats.
1. Entry of retrieval
data
2. Display of message
If more than one
message satisfies
the retrieval prameters,
a catalogue with
the data will be
displayed.
You can go back
and enter the specific
data for the desired
message.
2a.Display of catalogue
3. Display of Deletion
format.
1 The "entry of retrieval The only difference
for the
ata" for key D is si- two transactions
will be
milar to this described the terminal function
field
during retrieval for which will display
RETRIEVAL
local use key D. FOR DELETION.
If you need further Refer to Figure
3.2.9-1.a.
informatin, proceed
to section 3.2.5.5.
Retrieval Key Type D.…86…1 …02… …02…
…02… …02…
3.2.9 Retrieval For Deletion (REDE) (cont'd)
2 Observe that the system Refer to Figure
3.2.9-3.
outputs a new format If you have selected
REDE
on the VDU screen. ad retrieved the
specific message,
the DELETION format
is presented on
the VDU screen.
3 The DELETE is a mandatory Refer to Figures
3.2.9-3.a.
entry item. If you enter Yes,
the
On Keyboard, enter Y system will delete
the
(yes) or N (no). speific message.
Only messages transmitted
from this CAMPS
site can be deleted.
4 press ENTER key Refer to Figure
3.2.9-4.a.
If you have entered
N (no), the VDU
will display the
Message Handling
Menu.
5 Observe that PLEASE ENTER Refer to Fiure 3.2.9-3.b:
YOUR CONFIRMATION-CODE
appears in the system line.…86…1 …02… …02…
…02… …02…
3.2.9 Retrieval For Deletion (REDE) (cont'd)
6 If you do not wish to Refer to Figure
3.2.9-4.a.
confirm the transaction, Pressing the Special
press F11 key. Otherwse Function key - F11
cause to
proceed to step 7. CANCEL this transaction
and the system will
contain the same
information as before
the transaction
was started.
The VDU format area
will be cleared
and you will be
able to start a
new transactin.
7 On keyboard, enter the
confirmation code, CC.
8 Press ENTER key. Refer to Figure
3.2.9-4.b.
The system will
continue by asking
you for the confirmation-code
until you have entered
the valid confirmation-code,
or, used the Special
Funcion key F11-CANCEL.
If the system accepts
the confirmation-code,
the actual message
will be deleted
and the VDU will
display the Message
Handling Menu.
3.2.10 Response Message (RESP) (cont'd)
1 Before presentation of If you have selected
RESP,
the message, you can the system will
present
be prompted for a message fom the
respon-
security procedrues. se queue on your
VDU screen.
If so, proceed to Refer to Figure
3.2.10-1.a.
section 3.1.4 If the queue is
empty, the system
will display QUEUE
IS EMPTY in the
response line.
Refer to Figure
3.2.10-1.b. Ifa
catalog is presented,
you can select the
desired message
and use its data
for a new retrieving
attempt.
2 If you do not wish to
'page' in the message
proceed to step 4.
3 On keyboard, press the Refer to Figure
3.2.10-2.a.
desired DISPLA CONTROL key. The system displays
max.
27 lines at once.
You can get the
following page by
use of "page forward"
and the opposite
by use of "page
back".
"Scroll forward"
will get you one
line forward and
the opposite by
use of Scroll back".
3.2.10 Response Message (RESP) (cont'd)
4 If you do not wish to
get a hard copy of the
message, proceed to
step 6.
5 On keyboard, press Refer to Figure
3.2.10-4a.
Special Function key F-3. The system will
print out the message
on your associated
printer.
6 Press ENTER key Refer to Figure
3.2.10-4.b.
The system will
give you a new format
dependent of the
retrieval start
command.
For further infomation
to continue the
actual transaction,
proceed to one of
the following possibilities:
READDRESSAL Section
3.2.6 step 5.
RERUN, section 3.2.7
step 2.
REDISTRIBUTION,
section 3.2.8 step
2.
DELETION, section
3.2.9 step 2.…86…1
…02… …02…
…02… …02…
3.2.11 Receive Message (RECV) (cont'd)
1 Before presentation of If you have selected
the comment, you can RECV, the system
will
be prompted for se- present a commnt
from
curity procedures. the receive queue
on
If so, proceed to your VDU screen.
section 3.1.4 Refer to Figure
3.2.11-1.a.
SECURITY PROCEDRUES. If the queue is
empty, the system
will display QUEUE
IS EMPTY in the
response line.
Refer t Figure 3.2.11-1.b.
If more than one
comments are placed
in the queue, the
system will present
the comment with
the highest level
of precedence at
first.
2 If you do not wish
to 'page' in the comment,
proceed to step 4.
3 On keyboard, pres the Refer to Figure
3.2.11-2.a.
desired DISPLAY The system displays
max
CONTROL key. 27 lines at one.
You can get the
following page by
use of "page forward"
or the opposite
by use of "page
back".
"Scroll forward"
will get you one
lin forward and
the opposite by
use of "Scroll back".
4 If you do not wish to
get a hard copy of the
comment, proceed to
step 6.
3.2.11 Receive Message (RECV) (cont'd)
5 On keyboard, press Refer to Figure
3.2.11-4.a.
special function key F-3. The system will
print out the comment
on your assocated
printer.
6 If you do not wish to You must now decide
whether
DELETE the actual com- the comment must
be deleted
ment from the queue, or kept in the queue.
proceed to step 9.
7 Press Special Function Refer to Figure
3.2.11-4.b.
ke-F10. Pressing the F10-key
informs the system
to delete the displayed
comment fron the
receive queue and
present next comment,
if there is any.
8 proceed to step 10
9 press Special Function Refer to Figure
3.2.11-4.c.
key F-9. Pressing the F9key
informs the system
to keep the displayed
comment in the receive
queue and present
next comment, if
there is any.
10 If more comments If the queue is
empty,
are still in the receive the system will
display
queue, proceed to step 1. QUEUE I EMPTY in
the re-
Otherwise, proceed to sponse line and
present
section 3.2.2 Message the Message Handling
Handling Menu. Menu on the VDU
screen. If more
than one comment
is placed in the
queue, the system
will present the
comment with the
hihest level of
precedence at first.…86…1
…02… …02…
…02… …02…
3.3 Message Distribution
Assistance (MDAS)
(cont'd)
If you have selected
MDAS, an "assistance"
format is presented
on the VDU, dependent
of what kind of
message plaed first
in the distribution
queue.
Refer to Figure
3.3-1.a.
The system splits
up the messages
in 3 different actions:
- INCOMING MESSAGE
ASSISTANCE
- ALTERNATIVE DISTRIBUTION
ASSISTANCE
- NON DELIVERABLE
OBJECTS FROM
SCARS OR CCIS
The terminal function
field will inform
you which of the
possibilities in
question.
Refer to Figure
3.3-1.b.
Proceed to the action
which the terminal
function field displays.
3.3.1 Incoming Message
Assistance (cont'd)
The message in the
distribution queue
is belonging to
"incoming message
assistance" because
of the following
reasons:
- Missing or garbled
SICs
- Detection of
Internal Handling
Instructions
- Detection of
Special Handling
Instruction of
categories exclusive
or crypto security
and no evidence
of a GR in FL10
- Detection of
more than one
Special Handlin
Instruction
- Supervisor specified
distribution
to MDCO
The annotation line
will inform you
why the message
is sent for assistance.
Refer to Figure
3.3.1-1.a
1 Observe that the system Refer to Figure
3.3.1-1.b.
outputs an identify in the field TRANSACTION
ID.
2 NOTE: The system inserts Refer to Figure
3.3.1-1.c
TIME STAMP and the
ORIGINATING HEADQUARTERS
ID referenced to the message.
3.3.1 Incoming Message
Assistance (cont'd)
3 Observe that the nominal Refer to Figure
3.3.1-3.a
distribution list for the
message will be presented
in theunprotected SCD
fields.
4 Action/info SCDs (staff cell
designator) are optional
entry items.
If you do not wish to change
some of these entries,
proceed to step 6.
5 On keyboard, do the changes Refer to Figure
3.3.1-3.a
You ca specify new
SCDs to which the
message shall be
distributed, and
delete SCDs from
the nominal distribution.
This re-distribution
will be the new
list which now belongs
to the message.
6 The LOCAL PRINT is a Refer to Figure
3.3.1-3.b
mandatory etry item. If you enter yes,
the system
On keybord, enter Y (yes) will print out a
copy of the
or N (no). redistribution list
on your PRINTER.
The time stamp and
the originating
headquarters id
are contained in
the print.
3.3.1 Incoming Message
Assistance (cont'd)
7 If you do not wish to look
through the message, proceed
to step 9.
8 On keyboard, press the Refer to Figure
33.1-6.a
desired DISPLAY CONTROL The message will
be
key. presented on the
VDU screen by using
the PAGE ON key.
For further SCD
updates you can
return to the SCD
format by using
the PAGE BACK key.
NOTE: All fields
within the message
forat are protected
and you will not
be capable of modifying
or correcting the
message.
9 If you do not want a print
of the message, proceed to
step 11.
10 On keyboard, press the Refer to Figure
3.3.1-6.b.
program funcion key F3. The system ill print
out the whole message
on your printer.
11 On keyboard, depress the Refer to Figure
3.3.1-6.c.
ENTER key. The system will
validate the entered
SCDs and if the
system does not
find defects, the
message will be
sent on and the
next messge in the
distribution queue
will be presented
on the VDU screen.
If assistance is
needed again, the
message will be
returned exactly
to you (the same
MDCO position).
3.3.2 Alternative Distribution
Assistance (cont'd)
The message in the
distribution queue
is belonging to
"alternative distribution
assistance" because
of the fllowing
reasons:
- Messages/comments
which cannot
be delivered
to all the SCDs
in the list
- Flash messages/comments
deferred because
of time-out
1 Observe that the system Refer to Figure
3.3.2-1.a.
outputs an identify in the
field TRNSACTION ID.
2. NOTE: The system inserts Refer to Figure
3.3.2-1.b
TIME STAMP and the
ORIGINATING HEADQUATERS ID
referenced to the message.
3 Observe that the system Refer to Figure
3.3.2-1.c.
inserts designators to In addition to the
erminal
which distribution should designator and the
have been carried out. associated SCDs,
a delivery code
is presented at
the end of each
line. This code
can be used to display
a delivery message.
4 If you do not wish to obtain
a disply of a delivery
message, proceed to step 8.
3.3.2 Alternative Distribution
Assistance (cont'd)
5 On keyboard, press program Refer to Figure
3.3.2-4.a.
function key F7. Pressing the F7-key
informs the sysem
that the next instruction
is a "display error
message".
6 On keyboard, enter the Refer to Figure
3.3.2-3.a.
DELIVERY CODE.
7 Press ENTER key. Refer to Figure
3.3.2-4.b.
The delivery message
associated to the
code will be displayed
in th response line.
Refer to Figure
3.3.2-3.b.
8 The ALTERNATIVE
DISTRIBUTION SCDs are
optional entry items. If
you do not wish to define
one of these entries,
proceed to step 10.
9 On keyboard, enter the SCDs. Refer to Figure
3.3.2-.c.
You can specify
alternative SCDs
to which the message
shall be distributed.
This re-distribution
will not change
the SCD list which
belongs to the message.
10 The LOCAL PRINT is a Refer to Figure
3.3.2-3.d.
mandatory entry item. If ou enter yes,
the
On keyboard, enter Y (yes) system will print
out a copy
or N (no). of the redistribution
list on the associated
PRINTER.
The TIME STAMP and
the ORIGINATING
HEADQUARTERS ID
are contained in
the print.
3.3.2 Alternative Distribution
Assistance (cont'd)
11 If you do not wish to look
through the message, proceed
to step 13.
12 On keyboard, press the Refer t Figure 3.3.2-6.a.
desired DISPLAY CONTROL The message will
be
key. presented on the
VDU screen by using
the PAGE ON key.
For further SCD
updates you can
return to the SCD
format by using
the PAGE BACK key.
NOTE: All fields
within the essage
format are protected
and you will not
be capable of modifying
or correcting the
message.
13 If you do not want a print
of the message, proceed to
step 16.
14 On keyboard, press the Refer to Figure
3.3.2-6.b.
program funcion key F3.The system will print out
the whole message
on your printer.
15 On keyboard, depress the Refer to Figure
3.3.2-6.c.
ENTER key. The system will
validate the entered
SCDs and if the
system does not
find defects, the
message will be
sent on an the next
message in the distribution
queue will be presented
on the VDU screen.
If assistance is
needed again, the
message will be
returned exactly
to you (the same
MDCO position).
3.3.3 Non Deliverable
objects From SCARS
or CCIS (cont'd)
You will n̲o̲t̲ be
able to enter data
and distribute if
the object in the
distribution queue
is receivedfrom
SCARS/ACCIS or from
terminal queues
due to security
changes in the terminal
profiles.
1 If you do not want a print
of the object, proceed to
step 4.
2 On keyboard, press the Refer to Figure
3.3.3-2.a.
program function key F3.
3 Pres ENTER key. Refer to Figure
3.3.3-2.b.
The system will
print out a hard
copy of the object.
4 You have the possibility of
sending a comment to SCARS
or CCIS and requesting a
retransmission of the object
with the correct SCD.
You mus change to U̲S̲E̲R̲ ̲M̲O̲D̲E̲
if you want to send a
comment.
