top - download
⟦42cbeb69d⟧ Wang Wps File
Length: 9967 (0x26ef)
Types: Wang Wps File
Notes: FIKS Demo for NICSMA
Names: »3290A «
Derivation
└─⟦0f96917ac⟧ Bits:30006134 8" Wang WCS floppy, CR 0287A
└─ ⟦this⟧ »3290A «
WangText
- # -
FIKS Demonstration…01…for…01…NICSMA
1983-01-27
D̲E̲M̲O̲N̲S̲T̲R̲A̲T̲I̲O̲N̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲
The procedure is divided into 4 sections:
1. ACP127 Handling
2. SCC Supervisor Procedures
3. Switchover/Failure - Recovery
4. Additional Procedures
The demonstration will be carried out in operational FIKS environment.
1. A̲C̲P̲1̲2̲7̲ ̲H̲A̲N̲D̲L̲I̲N̲G̲
1.1 C̲o̲r̲r̲e̲c̲t̲ ̲m̲s̲g̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare a SMF-message with an ACP127 msg
as text-part and an addressee indicating
request for internal converson.
Message format given overleaf.
Release message end verify printout.
M̲e̲s̲s̲a̲g̲e̲ ̲f̲o̲r̲m̲a̲t̲ ̲f̲o̲r̲ ̲1̲.̲1̲
A correct msg format for ACP127 to SMF conversion (internal)
msg printout
E̲x̲p̲e̲c̲t̲e̲d̲ ̲m̲e̲s̲s̲a̲g̲e̲ ̲f̲r̲o̲m̲ ̲1̲.̲1̲
1.2 M̲s̲g̲ ̲w̲i̲t̲h̲ ̲i̲l̲l̲e̲g̲a̲l̲ ̲A̲C̲P̲-̲s̲t̲a̲r̲t̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare message for internal conversion
ACP …0e……0e… ̲ ̲ ̲…0f……0f… SMF.
Message format is given overleaf.
Release message.
SCC Verify entry in Intercept queue.
Enter Intercept procedure and correct message.
(Illegal ACP start).
Reenter message for conversion.
N/M Verify printout.
M̲e̲s̲s̲a̲g̲e̲ ̲f̲o̲r̲m̲a̲t̲ ̲f̲o̲r̲ ̲1̲.̲2̲
The ACP-part starts in an illegal way.
msg printout
E̲x̲p̲e̲c̲t̲e̲d̲ ̲m̲e̲s̲s̲a̲g̲e̲ ̲f̲r̲o̲m̲ ̲1̲.̲2̲
1.3 M̲s̲g̲ ̲w̲i̲t̲h̲ ̲u̲n̲k̲n̲o̲w̲n̲ ̲R̲I̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare message for internal conversion
ACP …0e……0e… ̲ ̲ ̲…0f……0f… SMF.
Message format is given overleaf.
Release message.
SCC Verify entry in Intercept queue.
Enter Intercept procedure and locate the
error.
Enter routing indicator-to-ano procedure
(RIA) to insert missing RI.
Reenter message for conversion.
N/M Verify printout.
M̲e̲s̲s̲a̲g̲e̲ ̲f̲o̲r̲m̲a̲t̲ ̲f̲o̲r̲ ̲1̲.̲3̲
The ACP-part contains an unknown RI.
msg printout
E̲x̲p̲e̲c̲t̲e̲d̲ ̲m̲e̲s̲s̲a̲g̲e̲ ̲f̲r̲o̲m̲ ̲1̲.̲3̲
1.4 M̲s̲g̲ ̲w̲i̲t̲h̲ ̲i̲l̲l̲e̲g̲a̲l̲ ̲p̲r̲e̲c̲e̲d̲e̲n̲c̲e̲ ̲a̲n̲d̲ ̲c̲l̲a̲s̲s̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare message for internal conversion
ACP …0e……0e… ̲ ̲ ̲…0f……0f… SMF.
Message format is given overleaf.
SCC Verify entry in Intercept queue.
Enter Intercept procedure and correct precedence
error.
Reenter message for conversion.
Enter Intercept procedure and correct classification
error.
Reenter message for conversion.
N/M Verify printout.
M̲e̲s̲s̲a̲g̲e̲ ̲f̲o̲r̲m̲a̲t̲ ̲f̲o̲r̲ ̲1̲.̲4̲
The ACP-part contains illegal precedence and non-existing classification.
msg printout
E̲x̲p̲e̲c̲t̲e̲d̲ ̲m̲e̲s̲s̲a̲g̲e̲ ̲f̲r̲o̲m̲ ̲1̲.̲4̲
1.5 C̲o̲r̲r̲e̲c̲t̲ ̲m̲s̲g̲ ̲f̲o̲r̲ ̲S̲M̲F̲ ̲t̲o̲ ̲A̲C̲P̲ ̲c̲o̲n̲v̲e̲r̲s̲i̲o̲n̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare message for internal conversion
SMF …0e……0e… ̲ ̲ ̲…0f……0f… ACP.
Message format is given overleaf.
Release message.
Verify printout.
M̲e̲s̲s̲a̲g̲e̲ ̲f̲o̲r̲m̲a̲t̲ ̲f̲o̲r̲ ̲1̲.̲5̲
A correct msg format for SMF to ACP127 conversion (internal).
msg printout
E̲x̲p̲e̲c̲t̲e̲d̲ ̲m̲e̲s̲s̲a̲g̲e̲ ̲f̲r̲o̲m̲ ̲1̲.̲5̲
2. S̲C̲C̲ ̲S̲U̲P̲E̲R̲V̲I̲S̲O̲R̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲S̲
2.1 T̲a̲b̲l̲e̲ ̲h̲a̲n̲d̲l̲i̲n̲g̲ ̲-̲ ̲P̲r̲o̲f̲i̲l̲e̲s̲/̲A̲N̲O̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Try Logon with unknown user.
SCC Insert new user.
N/M Logon with new user.
Start message preparation.
Use an unkown ANO.
SCC Display the unknown ANO by means of DOI.
Insert new ANO.
Display ANO again, verify now known.
N/M Use previously unknown ANO and verify now
known.
Cancel the preparation.
2.2 R̲o̲u̲t̲i̲n̲g̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
SCC Display routing table (DRT).
N/M Display routing table and verify accordance
with table at the SCC.
SCC Close a trunk that affects the routing
from the N/M.
Display routing table and verify the change.
N/M Display routing table and verify the change.
SCC Open the closed trunk.
Display routing table and verify the change.
N/M Display routing table and verify the change.
SCC Change a trunk delay (DDU) to exchange
the primary and secondary routing at the
N/M.
N/M Display routing table and verify the change.
2.3 R̲e̲p̲o̲r̲t̲i̲n̲g̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
SCC Request online diagnostic (SOD).
Generate 24 hours statistic (GMS).
N/M Print the generate statistic (PST).
SCC Notice hourly reports automatically each
hour.
3. S̲W̲I̲T̲C̲H̲O̲V̲E̲R̲/̲F̲A̲I̲L̲U̲R̲E̲ ̲-̲ ̲R̲E̲C̲O̲V̲E̲R̲Y̲
3.1 M̲i̲n̲o̲r̲ ̲F̲a̲i̲l̲u̲r̲e̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare a message by means of the readdressing
facility.
(Retrieve keys; msg id: KMB788
dtg : 2512592 JAN 83).
Release message and verify start of printout
on the ROP.
Shortly after printout has started the
LTU to which the VDU-ROP is connected,
is removed.
Verify error log at system console and
verify dead terminal.
Install LTU again and initiate it via the
system console.
Verify that the interrupted printout will
start from the beginning again.
3.2 M̲a̲j̲o̲r̲ ̲f̲a̲i̲l̲u̲r̲e̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Shortly after printout has started:
Power off the user create in active branch.
Verify switchover and restart of printout.
4. A̲D̲D̲I̲T̲I̲O̲N̲A̲L̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲S̲
4.1 S̲H̲-̲d̲e̲l̲i̲v̲e̲r̲y̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare a special handling message.
Release message.
Verify entry in SH-queue at destination
terminal.
Request printout of SH-message (SPH).
4.2 S̲e̲c̲u̲r̲i̲t̲y̲ ̲I̲n̲t̲e̲r̲r̲o̲g̲a̲t̲i̲o̲n̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Start preparation of a message at a terminal.
At the supervisor terminal the security
interrogation procedure is entered (ISI).
This requests the user id and password
of the message operator when the preparation
has finished.
Finish preparation and verify interrogation.
4.3 R̲e̲t̲r̲i̲e̲v̲a̲l̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
N/M Retrieve for display the messages generated during demonstration. (RTR)
A dtg range is used as retrieve key.
Display retrieved messages.
Retrieve one message for distribution at 2 terminals in 1 and 2 copies. (RDT)
4.4 P̲r̲e̲c̲e̲d̲e̲n̲c̲e̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
N/M Prepare 3 messages for delivery at a local
terminal. The msg's shall be:
1 big routine (R) msg
(2 pages of text)
1 small routine (R) msg
1 small flash (Z) msg
Release quick in the following:
Big routine (R)
Small routine (R)
Small flash (Z)
Verify printout in the following order:
Big routine (R)
Small flash (Z)
Small routine (R)
4.5 O̲r̲b̲i̲t̲
L̲o̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲A̲c̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲
SCC Change the network to consist of 2 N/M.
N/M's Change the routing table to point a third
N/M via the other N/M.
N/M Prepare and release a message with the
third N/M as destination.
Verify entry in DT-queue (Orbit error).
…01…Technical Specifications for FIKS
related to the TARE Requirement Areas
R̲e̲q̲.̲ ̲A̲r̲e̲a̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲F̲I̲K̲S̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
6. Transmission Rates The following transmission
rates are used in FIKS:
1) To the terminals: 75,
200, 1200 bps
2) On internodal trunks:
9600 bps
3) To NICS/TARE: 600 bps
12. Throughput/Cross The total throughput for
an
Office Time average N/M in the FIKS
network is 5856 messages/hour
(1 message: 1000 characters).
Terminal response time
is less than 5 sec., and
total flash message delivery
time is less than 2 minutes.
24. Storage of 3000 FIKS Tables are presently
pre-
Routing Indicators pared for 2080 RI's. (800
National and 1280 NATO
RI's). Small S/W modifications
in the access S/W may allow
for up to 24.000 RI's.
28. Code Conversion FIKS operates internally
in ASCII (ITA/5) and supports
baudot code (ITA/2) terminals
by code conver-
sion in line termination
units.
