DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦4cc3c207c⟧ Wang Wps File

    Length: 1710 (0x6ae)
    Types: Wang Wps File
    Notes: Spelunked
    Names: »~ORPHAN55.01«

Derivation

└─⟦d10d3ed68⟧ Bits:30006014 8" Wang WCS floppy, CR 0055A
    └─ ⟦this⟧ »~ORPHAN55.01« 

WangText

n available card slot in the existing card case of the terminal.

 o The actual size of the board is to be determined by TRR along with VERSITRON Inc.

 o The opto board shall be powered with 18VAC taken into consideration that the net
   voltage of 20V/240V varies +10%/-15%).

  The actual power specifications shall be established by TRR along with VERSITRON
  Inc. prior to the opto board design review.

 o The existing V24 filter interface mounted at the V24 port shall stay as is.  However,
   an pening shall be made in the lid of the V24 port allowing the opto fiber and
   connectors to enter the terminal.

 o The opto cable shall enter the terminal at the available V24 port.  The existing
   V24 plate on the outside of the port shall be substitted by an outside wave guide.

  The existing V24 plate shall be delivered along with the terminal.

 o The opto cable wave guide shall have an inside diameter of at least 10 mm to allow
   free passage of the opto connector.…86…1         …02…   …02…   …02…   …02…                        
                     
 M̲E̲D̲I̲U̲M̲ ̲S̲P̲E̲E̲D̲ ̲P̲R̲I̲N̲T̲E̲R̲

 The medium speed teleprinters for the CAMPS system are receive only (RO) printers.
  They shall have the following characteristics as a minimum.

 P̲r̲i̲n̲t̲i̲n̲g̲ ̲F̲r̲m̲a̲t̲

 80-132 char. per line, 6 lines per inch.  Characters formed by a 7 x 9 dot matrix.

 P̲r̲i̲n̲t̲i̲n̲g̲ ̲S̲p̲e̲e̲d̲

 240 ASCII char. per second, and a throughput of 120 full 80 char. lines per minute.

 By the high printing speed combined with input characers buffer, the printer shall
 be able to handle 20 lines of 15 characters at 600 Bps without loss of characters.

 T̲r̲a̲n̲s̲m̲i̲s̲s̲i̲o̲n̲ ̲S̲p̲e̲e̲d̲

 In asynchronous mode, the transmission speed shall be selectable up to 2400 Bps.

 C̲h̲a̲r̲a̲c̲t̲e̲r̲ ̲C̲o̲d̲e̲

 US ASCII - 1