DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦525c7c61e⟧ Wang Wps File

    Length: 10429 (0x28bd)
    Types: Wang Wps File
    Notes: PC/SVR/002    (Site 02)   
    Names: »3487A «

Derivation

└─⟦2b05c95ac⟧ Bits:30006158 8" Wang WCS floppy, CR 0067A
    └─ ⟦this⟧ »3487A « 

WangText




       3487A/ktd…02…PC/SVR/002 

PROTOCOL CONVERTER SITE 02 …02…HAU/830405…02……02…#
SITE VERIFICATION INSPECTION
PROCEDURE AND REPORT…02……02…PC











                   PROTOCOL CONVERTER SITE 02
                 SITE VERIFICATION INSPECTION
                 PROCEDURE AND REPORT


                 PC/SVR/002














                 Hans Haureberg




                 B]rge Hermansen







                                                           
                     
















                                                


            1


            830405










      830405                  All      Issue 1 of document



                    T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲




     1 INTRODUCTION  ................................  
         
       1.1 SCOPE ....................................  
             
       1.2 DOCUMENT FORMAT ..........................  
             
       1.3 REFERENCE DOCUMENT .......................  
             
       1.4 SITE VERIFICATION PROCEDURE ..............  
             

     2 SUMMARY OF THE SITE VERIFICATION INSPECTION ..  
         
       2.1 INSPECTION ...............................  
             
       2.2 PARTICIPANTS .............................  
             
       2.3 REMARKS ..................................  
             
       2.4 STATEMENT OF VERIFICATION ................  
             
       2.5 LIST OF REMARKS MADE AT THE SITE 
           VERIFICATION INSPECTION ..................  
             

     3 SITE VERIFICATION INSPECTION PROCEDURE 
       AND CHECKLIST ................................  
         
       3.1 EQUIPMENT AREA ...........................  
             
       3.2 CIVIL/STRUCTURAL MODIFICATIONS ...........  
             
       3.3 POWER DISTRIBUTION .......................  
             
       3.4 GROUNDING ................................  
             
       3.5 METALLIC SIGNAL CABLES ...................  
             
       3.6 ENVIRONMENTAL CONTROL 
           AND THE OFFLINE CONVERTER ................  
             
       3.7 LOCATION OF THE MAINTENANCE TERMINAL        
             
           AND THE OFFLINE CONVERTER ................  
             

     4 APPENDICES PREPARED AT THE SITE
       VERIFICATION INSPECTION ......................  
         
       4.1 TABLE OF CONTENTS ........................  
             
       4.2 SUBJECT ..................................  
             

     APPENDIX A .....................................…86…1 
            …02…   …02…   …02…   …02…                                  
             
                   1  I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲ 



1.1  S̲C̲O̲P̲E̲

     The purpose of the site inspection is to verify if
     the site is ready for installation of the PC equipment.



1.2  D̲O̲C̲U̲M̲E̲N̲T̲ ̲F̲O̲R̲M̲A̲T̲

     This document is structured in the following sections:

     Section 1:  Introduction
     Section 2:  Summary of the site verification inspection
     Section 3:  Site verification inspection procedure
                 and checklist
     Section 4:  Appendices prepared at the site verification
                 inspection

     Appendix A: List of participants

     Section 1 provide a brief description of the site verification
     procedure.

     Section 2, summarized from section 3 and section 4
     at the end of the inspection, is the formal SITE VERIFICATION
     REPORT as issued at the site.

     Section 3 is a guidance or procedure/checklist for
     the inspection team in performing the verification
     effort. The findings/action items of the verification
     is to be summarized in section 2.

     Section 4 contains appendices prepared at the inspection
     to support the findings of section 3.





1.3      R̲E̲F̲E̲R̲E̲N̲C̲E̲ ̲D̲O̲C̲U̲M̲E̲N̲T̲

             Protocol converter
             As-to-be-built documentation site 02
             Contract SHNMO-82-9205-INF
             Document PC/ATB/002

             The documment is the basic requirements document
             for the site preparation works.

             The document also includes information of how all
             the major assemblies of the PC equipment are to
             be physically installed and electrically integrated
             by the PC contractor at the site.



1.4      S̲I̲T̲E̲ ̲V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲

         The site verification inspection is intended to be
         a technically oriented inspection, whose basic aim
         is the evaluation of the works implemented by the Host
         Nation in relation to the stated requirements. The
         inspection will verify if the site is ready for PC
         equipment installation.

         Requirements for the Host Nation preparation works
         are stated in the above referenced document, which
         will be used for the verification proceedings.

         The pages of section 3 follows the format of the ATBB
         document.



         Each main item (ref table of contents) contains:

             -   Reference to applicable part of reference document.

             -   A verification checklist.

         Applicable remarks to the different checks shall be
         noted in the item page or as separate appendices (section
         4) if more space is required.

         When section 3 and section 4 are completed, the applicable
         remarks shall be summarized in section 2 being the
         formal Site Verification Report.











      2  S̲U̲M̲M̲A̲R̲Y̲ ̲O̲F̲ ̲T̲H̲E̲ ̲S̲I̲T̲E̲ ̲V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲I̲N̲S̲P̲E̲C̲T̲I̲O̲N̲



2.1      I̲N̲S̲P̲E̲C̲T̲I̲O̲N̲

         The verification inspection was performed.



2.2      P̲A̲R̲T̲I̲C̲I̲P̲A̲N̲T̲S̲

         The list of participants is attached as Appendix A.



2.3      R̲E̲M̲A̲R̲K̲S̲

         The remarks made at the inspection is summarized in
         section 2.5.

         Each party will carry out the required works as defined
         in this section within agreed time and their responsibility.





2.4      S̲T̲A̲T̲E̲M̲E̲N̲T̲ ̲O̲F̲ ̲V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲



































         ......................./.....................


2.5      L̲I̲S̲T̲ ̲O̲F̲ ̲R̲E̲M̲A̲R̲K̲S̲ ̲M̲A̲D̲E̲ ̲A̲T̲ ̲T̲H̲E̲ ̲S̲I̲T̲E̲ ̲V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲I̲N̲S̲P̲E̲C̲T̲I̲O̲N̲

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         S̲E̲R̲I̲A̲L̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲A̲C̲T̲I̲O̲N̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3        SITE VERIFICATION INSPECTION 
         P̲R̲O̲C̲E̲D̲U̲R̲E̲ ̲A̲N̲D̲ ̲C̲H̲E̲C̲K̲L̲I̲S̲T̲

         This section contains checklists for preparation works
         concerning the PC rack, the offline PC and the maintenance
         terminal.



3.1      E̲Q̲U̲I̲P̲M̲E̲N̲T̲ ̲A̲R̲E̲A̲

         Reference:  1)   Para 3.1

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲

         Checklist:  1.   Room size
                     2.   Equipment layout
                     3.   Equipment intake route, limitations
                     4.   Unpacking area

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3.2      C̲I̲V̲I̲L̲/̲S̲T̲R̲U̲C̲T̲U̲R̲A̲L̲ ̲M̲O̲D̲I̲F̲I̲C̲A̲T̲I̲O̲N̲S̲

         Reference:  1)   Para 3.2

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         Checklist:  1.   Floor and cover type
                     2.   Depth of false floor
                     3.   False floor penetrations
                     4.   Room height
                     5.   1 through 4 when plinth is applicable

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3.3      P̲O̲W̲E̲R̲ ̲D̲I̲S̲T̲R̲I̲B̲U̲T̲I̲O̲N̲

         Reference:  1)   Para 3.4

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲

         Checklist:  1.   Power allocated for PC equipment
                     2.   Power characteristics
                     3.   Power distribution board
                     4.   Power cabling for PC rack
                     5.   Conduit interface/J-box
                     6.   Power outlets for the offline 
                          converter and the manitenance terminal
                     7.   Utility outlets
                     8.   Lighting level

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3.4      G̲R̲O̲U̲N̲D̲I̲N̲G̲

         Reference:  1)   Para 3.4

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲

         Checklist:  1.   Secure ground terminal
                     2.   Ground distribution for PC rack
                     3.   Ground distribution for offline 
                          converter and maintenance terminal

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3.5      M̲E̲T̲A̲L̲L̲I̲C̲ ̲S̲I̲G̲N̲A̲L̲ ̲C̲A̲B̲L̲E̲S̲

         Reference:  1)   Para 3.5 and 5.1

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲

         Checklist:  1.   Cabling plan (routing)
                     2.   Type of cable duct installed
                     3.   Cable duct interface (J-box/knock-out
                     4.   Cable tails and identification

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3.6      E̲N̲V̲I̲R̲O̲N̲M̲E̲N̲T̲A̲L̲ ̲C̲O̲N̲T̲R̲O̲L̲

         Reference:  1)   Para 3.6

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲

         Checklist:  1.   Environmental control system
                     2.   Cooling capacity for PC equipment
                     3.   Humidity control
                     4.   Ducting

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



3.7      LOCATION OF THE MAINTENANCE TERMINAL
         A̲N̲D̲ ̲T̲H̲E̲ ̲O̲F̲F̲L̲I̲N̲E̲ ̲C̲O̲N̲V̲E̲R̲T̲E̲R̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

         Reference:  1)   Para 4.1 and 5.1

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲

         Checklist:  1.   Locations
                     2.   H/N provided trolley/table
                     3.   Power outlets (plug types)
                     4.   Junction box for metallic cable
                          to offline PC
                     5.   Cable tails and identifications

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲ ̲



4        APPENDICES PREPARED AT THE SITE 
         V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲I̲N̲S̲P̲E̲C̲T̲I̲O̲N̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

         This section contains additional remarks and sketches
         prepared during the site verification to support the
         findings of section 3.


4.1      T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲
         A̲P̲P̲ ̲N̲O̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲P̲A̲G̲E̲
         ̲ ̲ ̲ ̲ ̲



4.2      S̲U̲B̲J̲E̲C̲T̲:

          ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲
         N̲O̲T̲E̲S̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
         ̲ ̲ ̲ ̲ ̲



LIST OF PARTICIPANTS

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
N̲A̲M̲E̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲O̲R̲G̲A̲N̲I̲S̲A̲T̲I̲O̲N̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲T̲E̲L̲E̲P̲H̲O̲N̲E̲
 ̲ ̲ ̲ ̲