top - download
⟦6335b08bc⟧ Wang Wps File
Length: 24328 (0x5f08)
Types: Wang Wps File
Notes: Spelunked
Names: »~ORPHAN75.08«
Derivation
└─⟦231b08da1⟧ Bits:30006068 8" Wang WCS floppy, CR 0022A
└─ ⟦this⟧ »~ORPHAN75.08«
WangText
…02…CPS/ICD/0001
…02…801017
USER PROCEDURES AND ASSOCIATED FORMATS
CAMPS
1̲2̲ ̲ ̲C̲O̲M̲M̲E̲N̲T̲ ̲E̲D̲I̲T̲I̲N̲G̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲G̲3̲)̲
This is a format including system/operator interaction.
The protocol is described below. Reference should also
be made to Figs. 12a and 12b.
12.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
ec(cr)(EOL)
This is entered by the operator. When the terminal
is in the rest mode, the system shall respond to the
above sequence by conditioning itself to follow the
protocol for comment editing embodied in this format.
2.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)
The system shall transmit this format line with variable
fields V1 and V2 as described in Section 2.2 and referring
to the transaction in course.
12.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
YOUR(sp)REF(sp)(v3)(cr)(EOL)
The sysem shall output the first part of this format
and await the entry of v3 by the operator. The composition
of v3 will be as described in Section 2.2.1.1, and
it will be the reference number of the "comment" which
the operator wishes to "edit". The reponse of the system
shall be one of the following appropriate to the circumstances.
12.3.1 V̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the serial number refers to a comment stored in
the system, the preparation of which has been completed
and is available for editing at that preparation postion,
the procedure shall continue with format line I.
12.3.2 I̲n̲v̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the entry is not of a valid form, the procedure
shall continue with a default sequence: The system
transmitting format line D and awaiting a new entry
for v3. If thee successive invalid entries occur the
system shall transmit from format line E and Q and
return to rest mode. No further action shall be taken
with respect to the editing procedure, except that
an entry shall be made in the system log.
12.3.3 o̲n̲-̲e̲x̲i̲s̲t̲e̲n̲t̲ ̲C̲o̲m̲m̲e̲n̲t̲
If the entry is valid in form but does not correspond
to a comment stored in the central equipment, the procedure
shall continue with the default sequence described
above, but with format line F1 instead for format line
D. A dfault log entry is required.
12.3.4 N̲o̲t̲ ̲A̲v̲a̲i̲l̲a̲b̲l̲e̲ ̲a̲t̲ ̲t̲h̲i̲s̲ ̲T̲e̲r̲m̲i̲n̲a̲l̲
If the entry is valid, but refers to a comment which
has not been originated from that terminal, the procedure
shall continue with format line F2 and format line
Q and return t rest mode with respect to that terminal.
An entry shall be made in the system log.
12.3.5 C̲o̲m̲m̲e̲n̲t̲ ̲h̲a̲s̲ ̲b̲e̲e̲n̲ ̲T̲r̲a̲n̲s̲m̲i̲t̲t̲e̲d̲
Once a comment has been transmitted, no further changes
can be made and it will be moved from the storage.
In these circumstances, the procedue shall continue
with the sequence format line H and format line Q.
The variable V4 shall be composed as described in Section
2.2.1.2 and shall be the time of release of the message.
The system shall return to rest mode with respect to
that termina, and an entry shall be made in the system
log.
12.3.6 C̲o̲m̲m̲e̲n̲t̲ ̲P̲r̲e̲p̲a̲r̲a̲t̲i̲o̲n̲ ̲n̲o̲t̲ ̲C̲o̲m̲p̲l̲e̲t̲e̲
If the comment referred to has not been completely
prepared (e.g. if the procedure under Format G1 has
been suspended by a higher precedence transaction th
system shall transmit format line R and recommence
Format G1 at the point at which interruption took place
if this was in a format line associated with the input
of text, otherwise with the format line following the
last complete format line. Whenstarting in "text" the
last line entered during the previous preparation or
editing procedure shall be printed out and the terminal
device shall be conditioned so that if a printing character
is entered from the keyboard it shall be printed/displayd
in the position immediately following the last character
of the previous entry.
12.4 F̲o̲r̲m̲a̲t̲ ̲l̲i̲n̲e̲ ̲I̲
CLEAN?(sp)COPY?(sp)(r)(cr)(EOL)
The system shall transmit the appropriate part of the
format line and await the response of the operator.
12.4.1 r̲ ̲-̲ ̲y̲e̲s̲ ̲o̲r̲ ̲n̲o̲
If the response is yes the procedure shall continue
either:
- with a format line K, if the comment is classified
to a level specified by the supervisor for that
position or higher, also if it belongs to the special
handling categories (as pecified by the supervisor
for that position), and if the sequence starting
with format line K has not already been entered
during this editing procedure.
- or otherwise by transmitting the comment as described
in Section 10.6.1 and continuing wth format line
O.
If the response is no, the procedure shall continue
with format line O.
12.4.2 D̲e̲f̲a̲u̲l̲t̲ ̲S̲e̲q̲u̲e̲n̲c̲e̲
If a valid response is not obtained, the system shall
output format line J and wait for further entry by
the operator. If a vald entry is not received after
five attempts, the system shall transmit format lines
E and Q and terminate the procedure and return to rest
mode with respect to the terminal. No further action
shall be taken with respect to the procedure so terminaed;
except an entry shall be made in the system log.
12.5 F̲o̲r̲m̲a̲t̲ ̲l̲i̲n̲e̲s̲ ̲K̲,̲ ̲L̲,̲ ̲M̲,̲ ̲D̲ ̲a̲n̲d̲ ̲N̲
These format lines constitute the security interrogation
sequence which is used when a copy of a classified
comment is requested. The sequence and compositon of
each format line shall be as for format lines B, C,
D, F and G of Format I (see Section 14). The procedure
shall be as described for that format; except that
when a valid entry is made, the system shall continue
after format line M (D of Formt I) by transmitting
the comment in Format G1, followed by the format line
O. The procedure may be terminated under the provisions
of Section 14, if the security interrogation aborts.
A log entry is then required.
12.6 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲O̲
CORRECTIONS?(sp)(r)(cr)(EOL)
The system shall transmit the appropriate part of this
format line and await operator response.
12.6.1 r̲ ̲-̲ ̲y̲e̲s̲ ̲o̲r̲ ̲n̲o̲
If theoperator enters yes, the procedure shall continue
with the correction sequence described in Section 31
and then return to formal line I (Section 12.4). If
the operator enters no, the procedure shall continue
with format line P.
12.6.2 D̲e̲f̲a̲u̲l̲t̲ ̲S̲e̲u̲e̲n̲c̲e̲
This shall be as described in Section 4.6.2, except
that line Q replaces line T.
12.7 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲P̲
TRANSMIT?(sp)(r)(cr)(EOL)
The system shall transmit the first part of this format
line and await operator response.
12.7.1 r̲ ̲-̲ ̲y̲e̲ ̲o̲r̲ ̲n̲o̲
If the operator responds with a valid entry, the system
shall transmit format line Q and return to rest mode
with respect to that terminal. If the response is yes,
the system shall then additionally initiate the transmission
of the commentin the format described in Section 11
to the nominated staff cells. If the response is no,
the system shall hold the comment until instructed
to proceed using Format G3 again.
The drafter shall be periodically notified of such
comments which are ithheld (see Section 21).
12.7.2 D̲e̲f̲a̲u̲l̲t̲ ̲S̲e̲q̲u̲e̲n̲c̲e̲
If the operator responds with an invalid entry, the
procedure shall continue with the default sequence
described in Section 12.6.2. System log is required
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A ec(cr)(EOL)
B (V1)(sp)(V2)(EOL)
C YOUR(sp)REF(sp)(v3)(cr)(EOL)
D INVALID(sp)-(sp)RY(sp)AGAIN(EOL)
E CONTACT(sp)SUPERVISOR(EOL)
F1 NON(sp)EXISTENT(EOL)
F2 NOT(sp)PREPARED(sp)FROM(sp)THIS(sp)TERMINAL(EOL)
H NOT(sp)AVAILABLE(sp)-(sp)TRANSMITTED(sp)(V4)(EOL)
I CLEAN(sp)COPY(sp)(r)(cr)(EOL)
J ANSWER(sp)YES(sp)OR(sp)NO(EOL)
KIDENTIFY(sp)YOURSELF(EOL)
L (x)(cr)(EOL)
M GO(sp)AHEAD(EOL)
N NO(sp)GOOD(sp)-(sp)UNATTENDED(sp)OPERATION(sp)FROM(sp)(V6)(EOL)
O CORRESTIONS?(sp)(r)(cr)(EOL)
P TRANSMIT?(sp)(r)(cr)(EOL)
Q END(EOL)
R PREPARATION(sp)NOT(sp)COMPLETE(EOL)
Fig 12a FORMAT G3 - EDITING FORMAT…86…1 …02… …02… …02… …02… …02…
A ec
B LOC130 160320Z JUN 80
C YOUR REF loa050
I CLEAN COPY? yes
O CORRECTIONS? yes
K IDENTIFY YOURSELF (Assuming that the comment is classified)
xxxxxxxxxxxx
GO AHEAD
(Correction procedures as specified in Section 31).
I CLEAN COPY? yes
(Comment is printed out in Format G1 (lines A through
I)
O CORRECTIONS? no
P TRANSMIT? yes
Q END
Fig. 12b FORMAT G3 - EDITING FORMAT (EXAMLE)…86…1 …02… …02… …02… …02…
1̲3̲ ̲ ̲R̲E̲T̲R̲I̲E̲V̲A̲L̲ ̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲H̲)̲
"This is a format including system/operator interaction.
It can be used to retrieve outgoing messages which
have been released (Format E2) and incomig messages
which have been previously distributed (Format E1),
comments (Format G1), notification of release (Format
F), and "first draft" copy for Format A. The system
will retain the initial version of the message prepared
using Format A separatey from the current version.
Reference should also be made to figs. 13a and 13b."
13.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
rm(cr)(EOL)
If this sequence is entered by the operator when the
terminal is in the rest mode, the system shall respons
by conditioning itsel to follow the protocol for retrieval
of messages starting with format line B below.
13.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)
The system shall transmit this format line with the
variable fields V1 and V2 as described in Section 2.2
and referringto the transaction in course.
13.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
YOUR(sp)(REF)(sp)(v3)(sp)(v4)(cr)(EOL)
The system shall output the first part of this format
line and await entry of v3 and v4 by the operator.
The composition of v3 and v4 will be as describe in
Section 2.2.1.1 and 2.2.1.2 and will be the reference
of the message or transaction which the operator wishes
to retrieve i.e. terminal designator plus transaction…86…1
…02… …02… …02… …02…
serial number and the time stamp for Format A, E1,
E2,F.The response of the system shall be one of the
following appropriate to the circumstances.
13.3.1 V̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the rference specified in line C refers to a stored
message which has been releases (outgoing) or distributed
to staff cells (incoming), or a transaction (Format
F or A) to which the terminal has access; the procedure
shall continue either as described n Section 13.4 if
the message or transaction is classified, or as described
in Section 13.5 if the message is unclassified.
13.3.2 I̲n̲v̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the entry is not a valid form, or refers to a message
or transaction to which the operator doesnot have access
the system shall continue with a default sequence by
tranmsmitting format line E and awaiting a new entry
for v3 and v4. If three successive invalid entries
are made by the operator, the system shall transmit
format line L and K andreturn to rest mode with respect
to the terminal. No further action shall be taken with
respect to the retrival request, except that a suitable
entry shall be made in the system log.
13.3.3 N̲o̲n̲-̲E̲x̲i̲s̲t̲e̲n̲t̲ ̲M̲e̲s̲s̲a̲g̲e̲
If the entry is valid in form bu does not correspond
to a message or transaction stored in the system, the
procedure shall continue with the default sequence
described in Section 13.3.2 but with the format line
F instead to format line E.
13.4 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲S̲ ̲H̲,̲ ̲I̲,̲ ̲D̲,̲ ̲E̲,̲ ̲a̲n̲d̲ ̲J̲
f appropriate, the system shall continue with the security
interrogation constituted by these lines. The sequence
and composition of each line shall be as described
for format lines B, C, D, F, and G of Format I (see
Section 14). The procedure shal be as described…86…1
…02… …02… …02… …02…
in that format except that when a valid entry is made,
the procedure shall, after format line D of Format
I, continue with the procedure described in Section
13.5. Default system og is required.
13.5 T̲R̲A̲N̲S̲M̲I̲S̲S̲I̲O̲N̲ ̲O̲F̲ ̲T̲H̲E̲ ̲M̲E̲S̲S̲A̲G̲E̲/̲T̲R̲A̲N̲S̲A̲C̲T̲I̲O̲N̲ ̲T̲O̲ ̲T̲H̲E̲ ̲T̲E̲R̲M̲I̲N̲A̲L̲S̲
Transactions in Format F or A shall be displayed in
Format F and C2, respectively except that the format
shall start with the format line G, RETRIEVAL(sp)(V1)(sp)(V2(EOL)
where V1 and V2 are the transaction identifications
for the transaction in course. The system shall transmit
a message in accordance with Format E1 (incoming message)
or Format E2 (outgoing message), except the format
shall start with format ine G followed by format line
N, PREVIOUSLY(sp)DELIVERED(sp)AS(sp)(V3)(sp)(v4)(EOL),
where V3 and V4 are the transaction identifications
for the original message.
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A rm(cr)(EOL)
B V1(sp)(V2)(EOL)
C YOUR(sp)REF(sp)(v3)(sp)(v4)(cr)(EOL)
D OK(EOL)
E INVALID(sp)-(sp)TRY(sp)AGAIN(EOL)
F NON(sp)EXISTANT(sp)-(sp)TRY(sp)GAIN(EOL)
G RETRIEVAL(sp)(V4)(sp)(V5)(EOL)
H IDENTIFY(sp)YOURSELF(EOL)
I (x)(cr)(EOL)
J NO(sp)GOOD(sp)-(sp)UNATTENDED(sp)OPERATION(sp)FROM(sp)(V6)(EOL)
L CONTACT(sp)SUPERVISOR(EOL)
K END(EOL)
N PREVIOUSLY(sp)DELIVERED(sp)AS(sp)(V7)(sp)(v8)(EL)
…01…Fig. 13a FORMAT H
MESSAGE RETRIEVAL FORMAT…86…1 …02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A rm
B CEA253 130330 AUG 80
C YOUR REF CEA123 121204Z AUG 80
D OK
K END
FIG 13b
MESSAGE RETRIEVAL FORMAT (EXAMPLE)
1̲4̲ ̲ ̲S̲E̲C̲U̲R̲I̲T̲Y̲ ̲I̲N̲T̲E̲R̲R̲O̲G̲A̲T̲I̲O̲N̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲I̲1̲)̲
This format is employed to ensure that a message preparation,
release or distribution terminal is manned by an operator
who is permittedto receive classified messages. Reference
should also be made to Figs. 14a and 14b. The security
interrogation sequence may be initiated by the system
in the Formats D, C1, G3, H, L, and P1.
14.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
(̲V̲1̲(̲s̲p̲)̲(̲V̲2̲)̲(̲E̲O̲L̲)̲
V1 and V2: SeeSection 2.2 for the description; except
the values shall be those applicable to the transaction
in course.
14.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
(x)(cr)(EOL)
After being interrogated in Line B, the operator is
required to enter his password x to indicate to th
system that transmission of the message will not cause
a breach of security:
14.2.1 x̲
It shall be of the form: eight letters. On entry, each
character shall be echoed by the system as the character,
"x". If the entry is valid, the system shal transmit
format line D and E, and commence immediately with
the transaction requiring the interrogation.
14.2.2 D̲e̲f̲a̲u̲l̲t̲ ̲S̲e̲q̲u̲e̲n̲c̲e̲s̲
If the entry is not valid, the system shall transmit
format line F and await a new entry. If after three
attempts a valid entry is not made, the system sall
output format lines G, H and E, and return to rest
mode with respect to the terminal. The system shall,
from that instant onwards, not transmit classified
messages to the terminal until instructed to do so
by the supervisor. The supervisor shal be notified
of the occurence. A log entry is required.…86…1 …02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A (V1)(sp)(V2)(EOL)
B IDENTIFY(sp)YOURSELF(EOL)
C (x)(cr)(EOL)
D OK(EOL)
E END(EOL)
F INVALID(sp)-(sp)TRY(sp)AGAIN(EOL)
G NO(sp)GOOD(sp)-(sp)UNATTENDD(sp)OPERATION(sp)FROM(sp)(V3)(EOL)
H CONTACT(sp)SUPERVISOR(EOL)
FIG. 14a FORMAT I1…01…SECURITY INTERROGATION FORMAT
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A INA083 230817Z JAN 80
B IDENTIFY YOURSELF
either, C xxxxxxxxxxxx
D OK
E END
or, C xxxxxxxxxxxxx
F INVALID - TRY AGAIN
C xxxxxxxxxxx
D OK
E END
or, C xxxxxxxxxx
F INVALID - TRY AGAIN
C xxxxxxxxx
F INVALID - TRY AGAIN
C xxxxxxxxxx
G NO GOOD - UNATTENDED OPERATION FROM 230822Z
JAN 80
H CONTACT SUPERVISOR
E END
FIG. 14b FORMAT I1…01…SECURITY INTERROGATION FORMAT…01…( EXAMPLES)…86…1 …02… …02… …02… …02…
1̲5̲ ̲ ̲S̲E̲C̲U̲R̲I̲T̲Y̲ ̲W̲A̲R̲N̲I̲N̲G̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲I̲2̲)̲
This procedure is initiated by the system before display
of information of certain security classification or
above, or beloging to the specia handling category
as specified by the supervisor. Reference should also
be made to Figs. 15a and 15b.
15.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)̲
V1 and V2: See Section 2.2 for the description; the
values shall be those applicable to the transactin
in course.
15.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
A warning message of upto 500 characters will be displayed.
The operator is then required to enter a security code.
15.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲D̲
After the warning message the operator shall enter
a security code x. I the entry is valid the system
shall display the classified information.
x: A letter sequence of five letters. The sequence
to be used shall be as specified by the supervisor.
It will be displayed on the VDU screen as "blank" characters.
15.4D̲E̲F̲A̲U̲L̲T̲ ̲S̲E̲Q̲U̲E̲N̲C̲E̲
If the entry is not valid, the system shall transmit
format line E and await a new entry. If after three
attempts a valid entry is not made, the system shall
output format lines F and G, and return to rest mode
with respect to te terminal. The supervisor shall
be notified of the occurrence and a log entry is required.…86…1
…02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A -
B (v1)(sp)(V2)(EOL
C (Warning message (upot 500 characters)
F CONTACT(sp)SUPERVISOR(EOL)
G END(EOL)
Fig. 15a
F̲O̲R̲M̲A̲T̲ ̲I̲2̲ ̲-̲ ̲E̲C̲U̲R̲I̲T̲Y̲ ̲W̲A̲R̲N̲I̲N̲…86…1 …02… …02… …02… …02…
1̲6̲.̲ ̲ ̲T̲I̲M̲E̲ ̲S̲T̲A̲T̲E̲M̲E̲N̲T̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲J̲)̲
This format is used to request a statement of the time.
This includes interactive procedures. Reference should
also be made to Figs. 16a and 1b.
16.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
pt(cr)(EOL)
This is entered by the operator. When the terminal
is in the rest mode, the system shall respond to the
above sequence by transmitting format line B and then
return to rest mode with respect to that termina.
16.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
TIME(sp)IS(sp)(V1)(sp)(V2)(EOL)
V1: This shall consist af a six digit representing
the day of the month, the time of day in hours, minutes
and zone-suffix in the format described in Section
2.2.1.2.
V2: This shall cosist of the first three letters of
the month and the last two digits for the year.…86…1
…02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A pt(cr)(EOL)
B TIME(sp)IS(sp)(V1)(sp)(V2)(EOL)
Fig. 16a
F̲O̲R̲M̲A̲T̲ ̲J̲ ̲-̲ ̲T̲I̲M̲E̲ ̲S̲T̲A̲T̲E̲M̲E̲N̲T̲ ̲F̲O̲R̲M̲A̲T̲
A pt
B TIME IS 121301Z AUG 80
Fig. 16b
F̲O̲R̲M̲T̲ ̲J̲ ̲-̲ ̲P̲R̲I̲N̲T̲ ̲T̲I̲M̲E̲ ̲F̲O̲R̲M̲A̲T̲ ̲(̲E̲X̲A̲M̲P̲L̲E̲)̲…86…1 …02… …02… …02… …02…
1̲7̲.̲ ̲ ̲S̲I̲G̲N̲I̲N̲G̲-̲I̲N̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲K̲1̲)̲
This format will be used by an operator when accepting
responsibility for terminal operation (e.g. when coming
on duty). Only after use of this fomat, the operator's
code becomes a valid code for security interrogation.
It includes interactive procedures. Reference should
also be made to Figs. 17a and 17b.
17.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
si(cr)(EOL)
This line is entered by the operator. If the erminal
is in rest mode, the system shall respond with line
B.
17.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(sp)YOUR(sp)IDENTIFICATION(sp)CODE(EOL)
V1 and V2: These are described in section 2.2.1.1
and 2.2.1.2 respectively. The values shall be those
appicable for the transaction in course.
17.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
y(cr)(EOL)
After the request in Line B, the operator is required
to enter his operator identification code y.
17.3.1 y̲
Operator identification code consisting of three letters.
n entry, each character shall be echoed as the character
"X". If the entry is valid, the system shall transmit
format line D.…86…1 …02… …02… …02… …02…
17.3.2 D̲e̲f̲a̲u̲l̲t̲ ̲S̲e̲q̲u̲e̲n̲c̲e̲
If the entry is not valid, the system shall transmit
format line H and await a new entry. If, after three
attempts, a valid entry has not been made by th operator,
the system shall output format line I followed by lines
J and G.
The terminal shall then return to unattended mode of
operation. The supervisor shall be notified of the
occurrence. A log entry is required.
17.4 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲E̲
x(c)(EOL)
After being interrogated by the system in line D, the
operator is required to enter his password x.
17.4.1 x̲
Password consisting of eight letters.
On entry, each letter shall be echoed as the character
"X". If the entry is valid, th system shall transmit
format line F and G.
If the entry is not valid, then the system shall follow
the sequence described in section 17.3.2.
17.5 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲F̲
OK(sp)-(sp)ATTENDED(sp)OPERATION(sp)FROM(sp)(T1)(EOL)
T1: This shall be the tme stamp that the terminal
comes into attended operation mode. T1 shall be composed
as described in Section 2.2.1.2.
17.6 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲J̲
NO(sp)GOOD(sp)-(sp)UNATTENDED(sp)OPERATION(sp)FROM(sp)
(T2)(EOL)
T2: This shall be the time stamp that the terminal
returns to unattended mode operation. 2 shall be composed
similar to T1.…86…1 …02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A si(cr)(EOL)
B (V1)(sp)(V2)(sp)YOUR(sp)IDENTIFICATION(sp)CODE(EOL)
C (y)(cr)(EOL)
D IDENTIFY(sp)YOURSELF(EOL)
E (x)(cr)(EOL)
F OK(sp)-(sp)ATTENDED(sp)OPERATON(sp)FROM(sp)(T1)(EOL)
G END(EOL)
H INVALID(sp)-(sp)TRY(sp)AGAIN(EOL)
I CONTACT(sp)SUPERVISOR(EOL)
J NO(sp)GOOD(sp)-(sp)UNATTENDED(sp)OPERATION(sp)FROM(sp)
(T2)(EOL)
Fig. 17a
F̲O̲R̲M̲A̲T̲ ̲K̲1̲ ̲S̲I̲G̲N̲I̲N̲G̲ ̲I̲N̲ ̲F̲O̲R̲M̲A̲T̲…86…1 …02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A si
B CEA035 120749Z AUG 80 YOUR IDENTIFICATION CODE
C xxx
D IDENTIFY YOURSELF
E xxxxxxxx
F OK - ATTENDED OPERATION FROM 120800Z AUG 80
G END
Fig. 17
F̲O̲R̲M̲A̲T̲ ̲K̲1̲ ̲S̲I̲G̲N̲I̲N̲G̲-̲I̲N̲ ̲F̲O̲R̲M̲A̲T̲ ̲(̲E̲X̲A̲M̲P̲L̲E̲)̲…86…1 …02… …02… …02… …02…
1̲8̲.̲ ̲ ̲S̲I̲G̲N̲I̲N̲G̲-̲O̲U̲T̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲K̲2̲)̲
This format will be used by an operator when he relinguishes
his responsibility for a terminal. His code will cease
to be a valid code for securiy interrogation until
he again "signs-in" using format K1, and then only
if this is done before the validity of the code expires
(see section 17). Reference should also be made to
Figs. 18a and 18b.
18.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
so(cr)(EOL)
This line s entered by the operator. If the terminal
is in rest mode the system shall respond with format
line B (see section 2.2.1) and then display format
line C.
18.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
UNATTENDED(sp)OPERATION(sp)FROM(sp)(T1)(EOL)END(EOL)
T1: This shal be the time stamp that the terminal
turns to unattended operation. T1 shall be composed
and described in Section 2.2.1.2.…86…1 …02…
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A so(cr)(EOL
B (V1)(sp)(V2)
C UNATTENDED(sp)OPERATION(sp)FROM(sp)(T1)(EOL)END(EOL)
Fig. 18a
F̲O̲R̲M̲A̲T̲ ̲K̲2̲ ̲S̲I̲G̲N̲I̲N̲G̲-̲O̲U̲T̲ ̲F̲O̲R̲M̲A̲T̲
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A so
CEA038 120816Z AUG 80
C UNATTENDED OPERATION FROM 120816Z AUG 80
END
Fig. 18b
F̲O̲R̲M̲A̲T̲ ̲K̲2̲ ̲S̲I̲G̲N̲I̲N̲G̲-̲O̲U̲T̲ ̲F̲O̲R̲M̲A̲T̲ ̲(̲E̲X̲A̲M̲P̲L̲E̲)̲…86…1 …02… …02… …02… …02…
1̲9̲.̲ ̲ ̲C̲H̲A̲N̲G̲E̲ ̲O̲F̲ ̲P̲A̲S̲S̲W̲O̲R̲D̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲L̲)̲
This Format is deleted.…86…1 …02… …02… …02… …02…
2̲0̲.̲ ̲ ̲T̲E̲X̲T̲ ̲F̲O̲R̲M̲A̲T̲S̲ ̲(̲F̲O̲R̲M̲A̲T̲S̲ ̲M̲1̲ ̲T̲O̲ ̲M̲n̲)̲
Pre-defined text formats shall assist the drafter in
preparing the text part of a message. According to
the selected text format, the syste shall prompt the
drafter through the text preparation line by line.
Text formats are related to pre-defined message types.
This format is activated if a Message Type with a related
text format is specified in line B2 of Format A.
Maximum numbr of text formats to be stored is 200.
Each data entered by the drafter must be one of the
following character types:
- alphanumeric
- alphabetic
- numeric
Upon each entry of data, the system shall only perform
syntax validation checksconsisting of:
o check of mandatorial data
o check of length of data
o check of character types.
If an entry is invalid, then an error message shall
be displayed.
