top - download
⟦8b47ee4e7⟧ Wang Wps File
Length: 42009 (0xa419)
Types: Wang Wps File
Notes: CPS/SDS/008
Names: »1012A «
Derivation
└─⟦b282628ca⟧ Bits:30006035 8" Wang WCS floppy, CR 0059A
└─ ⟦this⟧ »1012A «
WangText
…00……00……00……00……00…@…02……00……00…@
@…05…@…06…(…0b…(…0c…(…0d…(
(…07…'…08…'…0e…'…05…'…06…&…09…&…0a…&…0c…&…0d…&…0e…&…0f…&…00…&…01…&…02…%…08…%…0b…%…0c…%…01…%…05…%…06…$…08…$…09…$…0a…$…0b…$…0c…$…86…1 …02…
…02… …02…
…02…CPS/SDS/008
…02…RIM/810801…02……02…
STP DESIGN SPECIFICATION
…02……02…CAMPS
4.2.4 S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲G̲e̲n̲e̲r̲a̲t̲i̲o̲n̲ ̲S̲u̲b̲-̲P̲a̲c̲k̲a̲g̲e̲
Sub-package, statistics generation, describes the creation
mechanisms invoked, upon production of hourly, dayly
and weekly statistics.
4.2.4.1 F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
The 3 functions carried out by this sub-package are;
see overview diagram on figure 4.2.4.1-1.
- generation of hourly statistics
- generation of daily statistics
- generation of weekly statistics
FIGURE 4.2.4.1-1…01…STATISTICS GENERATOR MAIN FUNCTIONAL SPECIFICATIONS
4.2.4.1.1 G̲e̲n̲e̲r̲a̲t̲i̲n̲g̲ ̲H̲o̲u̲r̲l̲y̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
The task of this part of the sub-package is to generate
intermediate statistical information, which is used
as basis for print-out of hourly statistics and generation
of daily statistics.
Overall functions of HSG are listed below and shown
on figure 4.2.4.1.1-1.
- calculate input addr. information
- input statistics sub-group data
- input processing information
- accumulate sub-group data
- store accumulated data
4.2.4.1.1.1 L̲o̲o̲p̲ ̲O̲v̲e̲r̲ ̲A̲l̲l̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲s̲
The number of times to initiate the accumulation procedure
below is indicated in the SDA table. No. of sub-groups
in SDA, level 1, contains this information.
4.2.4.1.1.2 C̲a̲l̲c̲u̲l̲a̲t̲e̲ ̲I̲n̲p̲u̲t̲ ̲A̲d̲d̲r̲e̲s̲s̲ ̲I̲n̲f̲o̲r̲m̲a̲t̲i̲o̲n̲
The 10 interval sub-group sections to be input to main
memory are addressed in the following way. From STP,
the starting addresses of the 10 interval subgroups
are derived. Further, the sub-group data area size
is calculated.
FIGURE 4.2.4.1.1-1…01…HOURLY GENERATOR FUNCTIONAL SPECIFICATION
FIGURE 4.2.4.1.1-2…01…HOURLY STATISTICS GENERATOR
4.2.4.1.1.3 I̲n̲p̲u̲t̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲ ̲D̲a̲t̲a̲
According to the above derived address information,
sub-group intervals are transferred from on-line disk
to main memory.
4.2.4.1.1.4 I̲n̲p̲u̲t̲ ̲P̲r̲o̲c̲e̲s̲s̲i̲n̲g̲ ̲I̲n̲f̲o̲r̲m̲a̲t̲i̲o̲n̲
Once during the use of HSG the STP information area
is transferred from disk to main memory. Processing
information during accumulation is contained in this
area.
4.2.4.1.1.5 A̲c̲c̲u̲m̲u̲l̲a̲t̲e̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲ ̲D̲a̲t̲a̲
The data locations contained in the 10 interval areas
are accumulated during a loop mechanism. Loop information,
i.e. number of times to go through all different loops,
is fetched from SDA. Three addressing pointers keep
track of interval sub-group data locations, hour section
data location, and processing location respectively.
4.2.4.1.1.6 S̲t̲o̲r̲e̲ ̲A̲c̲c̲u̲m̲u̲l̲a̲t̲e̲d̲ ̲D̲a̲t̲a̲
Accumulated data stored in main memory as sub-groups
are transferred to the corresponding sub-group area
contained in the hour section in use. The hour in use
status information is contained in the STP file information
area, hour section.
4.2.4.1.2 G̲e̲n̲e̲r̲a̲t̲i̲n̲g̲ ̲D̲a̲i̲l̲y̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
Incarnated once per day at 24.00 hour by the previously
described main program. The functions of DSG are:
- calculate input addressing information
- input statistics sub-group data
- accumulate sub-group data
- store accumulated data
4.2.4.1.2.1 L̲o̲o̲p̲ ̲O̲v̲e̲r̲ ̲A̲l̲l̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
The number of times to initiate the accumulation procedure
below is indicated in the SDA table. No. of sub-groups
in SDA, level 2, contains this information.
4.2.4.1.2.2 C̲a̲l̲c̲u̲l̲a̲t̲e̲ ̲I̲n̲p̲u̲t̲ ̲A̲d̲d̲r̲e̲s̲s̲i̲n̲g̲ ̲I̲n̲f̲o̲r̲m̲a̲t̲i̲o̲n̲
Addressing information, i.e. address specifying sub-group
hour data section and size of sub-group, is derived
from the STP file information area. STP file has previously
been transferred to main memory during generation of
the hourly statistics. DSG statistics are always produced
in conjunction with the hourly statistics.
FIGURE 4.2.4.1.2-1…01…DSG FUNCTIONAL SPECIFICATIONS
4.2.4.1.2.3 I̲n̲p̲u̲t̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲ ̲D̲a̲t̲a̲
Based on of the above calculated address and size information,
data are transferred from STP file, hour section, to
main memory. One I/O performs this transfer.
4.2.4.1.2.4 A̲c̲c̲u̲m̲u̲l̲a̲t̲e̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲ ̲D̲a̲t̲a̲
The data locations contained in the 24 hour sections
are accumulated during a loop mechanism. Loop information,
i.e. number of times to go through all loops, record,
field and subfield loops, is contained in the STP file
information area. Three addressing pointers keep track
of hour data location, day data location and processing
location respectively.
4.2.4.1.2.5 S̲t̲o̲r̲e̲ ̲A̲c̲c̲u̲m̲u̲l̲a̲t̲e̲d̲ ̲D̲a̲t̲a̲
Accumulated data stored in main memory as sub-groups
are transferred to the corresponding sub-group area
contained in the day section in use. The day in use
status information is contained in the STP file information
area, day section.
4.2.4.1.3 G̲e̲n̲e̲r̲a̲t̲i̲n̲g̲ ̲W̲e̲e̲k̲l̲y̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
The DSG handles the generation of weekly statistics
incarnated by the main program each 7 days. Functions
performed by DSG are:
- calculate input addressing information
- input statistics sub-group data
- accumulate sub-group data
- store accumulated data
4.2.4.1.3.1 L̲o̲o̲p̲ ̲O̲v̲e̲r̲ ̲A̲l̲l̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲s̲
The number of times to initiate the accumulation procedure
below is indicated in the SDA table. No. of sub-groups
in SDA, level 1, contains this information.
4.2.4.1.3.2 C̲a̲l̲c̲u̲l̲a̲t̲e̲ ̲I̲n̲p̲u̲t̲ ̲A̲d̲d̲r̲e̲s̲s̲i̲n̲g̲ ̲I̲n̲f̲o̲r̲m̲a̲t̲i̲o̲n̲
Addressing information i.e. address specifying sub-group
day data section, and size of sub-group is derived
from the STP file information area. STP file has previously
been transferred to main memory during generation of
the hourly statistics. WSG statistics are always produced
in conjunction with hourly statistics.
4.2.4.1.3.3 I̲n̲p̲u̲t̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲ ̲D̲a̲t̲a̲
Based on the above calculated address and size information,
data are transferred from STP file, day sections to
main memory. One I/O performs this transfer.
4.2.4.1.3.4 A̲c̲c̲u̲m̲u̲l̲a̲t̲e̲ ̲S̲u̲b̲-̲G̲r̲o̲u̲p̲ ̲D̲a̲t̲a̲
The data locations contained in the 7 day sections
are accumulated during a loop mechanism. Loop information,
i.e. number of times to go through all loops, record,
field-, and sub-field loops are contained in the STP
file information area. Three addressing pointers keep
track of day data location, week data location, and
processing location respectively.
4.2.4.1.3.5 S̲t̲o̲r̲e̲ ̲A̲c̲c̲u̲m̲u̲l̲a̲t̲e̲d̲ ̲D̲a̲t̲a̲
Accumulated data stored in main memory as subgroups
are transferred to the corresponding sub-group area
contained in the week section. The week data address
is contained in the STP file information area.
FIGURE 4.2.4.1.3-1…01…WSG FUNCTIONAL SPECIFICATIONS
4.2.4.2 S̲o̲f̲t̲w̲a̲r̲e̲ ̲S̲t̲r̲u̲c̲t̲u̲r̲e̲
On figure 4.2.4.2-1 the statistics generation sub-package
software structure is depicted.
For the HSG the following shall be noted. The input
calculation information procedure is incarnated once
upon a HSG call. Next module "loop over all sub-groups"
is initiated afterwards. This module invokes each of
the modules pictured below by each run-thorugh of a
sub-group. DSG and WSG follow the same roules outlined
above except that the "input processing information"
module is not present.
FIGURE 4.2.4.2-1…01…OVERALL SOFTWARE STRUCTURE FOR HSG, DSG, AND WSG
4.2.4.3 D̲a̲t̲a̲ ̲F̲l̲o̲w̲ ̲a̲n̲d̲ ̲C̲o̲n̲t̲r̲o̲l̲ ̲L̲o̲g̲i̲c̲
HIPO diagrams 5 1/3 through 5 3/3 show the data flow
and control logic for the statistics generation sub-package.
Diagram 5, 1/3, contains the flow for HSG.
Diagram 5, 2/3, shows the flow for DSG.
Diagram 5, 3/3, illustrates the flow for WSG.
Diagram 5 1/6
DIAGRAM 5 2/6 STP SP PD HOURLY STATISTICS GENERATOR
DIAGRAM 5 3/6 STP SP PD HOURLY STATISTICS GENERATOR
DIAGRAM 5 4/6 STP SP PD HOURLY STATISTICS GENERATOR
DIAGRAM 5 5/6 STP SP PD HOURLY STATISTICS GENERATOR
DIAGRAM 5 6/6 STP SP PD HOURLY STATISTICS GENERATOR
4.2.4.4 S̲u̲b̲-̲P̲a̲c̲k̲a̲g̲e̲ ̲D̲a̲t̲a̲
Data handled by sub-package 3 are statistics file resident.
The main functions of this sub-package are carried
out by the 3 generators HSG, DSG, and WSG. HSG works
on data from the 10 interval areas which are accumulated
and transferred to one of the hours in the hour section.
DSG works on 3 data areas, the above hour sections
are accumulated to form the current day data area.
Current day data area is in advance accumulated to
the data in the accumulating day section.
WSG data are the accumulated day area mentioned above
they are transferred to the week data area. Figure
4.1.4.2-4, last figure page, shows the different data
areas used by this sub-package.
4.2.4.5 S̲u̲b̲-̲P̲a̲c̲k̲a̲g̲e̲ ̲I̲n̲t̲e̲r̲f̲a̲c̲e̲s̲
Interface to dump sub-package is previously described
in paragraph 4.2.3.5. An indirect interface, via the
data areas described in 4.2.4.4, is the interface to
delivery sub-package.
Sub-package generate has produced the hourly, daily,
and weekly statistics, which sub-package delivery uses
as basis for generating the temporary CIFs.
Interface to main program sub-package is described
in paragraph 4.2.2.5.
4.2.5 D̲e̲l̲i̲v̲e̲r̲y̲ ̲S̲u̲b̲-̲P̲a̲c̲k̲a̲g̲e̲
Statistics delivery sub-package handles the statistics
delivery to TEP every 24 hours. The delivery in question
is the 24 one hour statistics, day statistics, and
week statistics.
4.2.5.1 F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Included in the specification is how the sub-package;
- generates temporary CIF
- appends statistics to CIF
- 24 one hour statistics
- 1 day statistics
- 1 week statistics
- delivery of CIF
- storage occupancy request response
4.2.5.1.1 G̲e̲n̲e̲r̲a̲t̲e̲ ̲T̲e̲m̲p̲o̲r̲a̲r̲y̲ ̲C̲I̲F̲
The statistics information to be delivered to TEP is
transferred via a CIF. A CSF CREATE CIF function call
performs this action. A view reference, is returned,
used for a later reference, during append and send
CIF.
FIGURE 4.2.5.1-1…01…DELIVERY STATISTICS FUNCTIONAL SPECIFICATION
4.2.5.1.2 A̲p̲p̲e̲n̲d̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲t̲o̲ ̲C̲I̲F̲
Information to be appended to the created CIF is contained
in the data area of the STP file. Information about
start address and amount of data to be appended, resides
in the informtion area of the STP file. Refer to figure
4.1.4.2-1. The information area has previously been
transferred to main memory in conjunction with generation
of the statistics.
4.2.5.1.2.1 C̲a̲s̲e̲ ̲H̲o̲u̲r̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
As seen on figure 4.1.4.2-2, location "hour 1 data
addr." contains the start address of the hour data
to be appended to the hourly CIF. 24 multiplied by
"hour size" gives the amount of data to be appended.
4.2.5.1.2.2 C̲a̲s̲e̲ ̲D̲a̲y̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
The "day 1 data addr" (L) location in the STP file
contains the data starting address of the previous
day data to be appended to the CIF. Contents of the
"day size" inform about amount of day data to be appended.
4.2.5.1.2.3 C̲a̲s̲e̲ ̲W̲e̲e̲k̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
Referring to figure 4.1.4.2-2, location "week data
addr" (0) holds the start address of the week information
to be appended to the week CIF. "Week size" (P) holds
the amount of information to be appended.
4.2.5.1.3 D̲e̲l̲i̲v̲e̲r̲y̲ ̲o̲f̲ ̲C̲I̲F̲
Each of the above completed CIF is sent to the queue
related to the statistics printer. Queue monitor under
CSF performs the delivey by the function call SEND
CIF. The item reference, is input parameter during
this function call. Final step for STP is to DISMANTLE
CIF acknowledging that STP has completed processing
the temporary CIF.
4.2.5.1.4 R̲e̲q̲u̲e̲s̲t̲ ̲S̲t̲o̲r̲a̲g̲e̲ ̲O̲c̲c̲u̲p̲a̲n̲c̲y̲
The CSF function request reply technique is used to
acknowledge TEP about the asychronous storage occupancy
request. STP passes on the request to MMS which returns
the actual value to STP.
4.2.5.2 S̲o̲f̲t̲w̲a̲r̲e̲ ̲S̲t̲r̲u̲c̲t̲u̲r̲e̲
On figure 4.2.5.2-1, the software structure of statistics
delivery is shown. The three upper left hand boxes
are related to delivery of statistics once every 24
hour. Storage occupancy module can be activated asynchronously
by TEP.
FIGURE 4.2.5.2-1…01…DELIVERY STATISTICS SOFTWARE STRUCTURE
4.2.5.3 D̲a̲t̲a̲ ̲F̲l̲o̲w̲ ̲a̲n̲d̲ ̲C̲o̲n̲t̲r̲o̲l̲ ̲L̲o̲g̲i̲c̲
The HIPO diagrams show the data flow and control covering
delivery statistics. The following modules are mapped
into the diagrams.
- hourly delivery
- daily delivery
- weekly delivery
- storage occupancy
All modules are activated or called from the main program
described in paragraph 4.2.2.
DIAGRAM 6 1/4 STP SP PD HOURLY STATISTICS DELIVERY
DIAGRAM 6 2/4 STP SP PD DAILY STATISTICS DELIVERY
DIAGRAM 6 3/4 STP SP PD WEEKLY STATISTICS DELIVERY
DIAGRAM 6 4/4 STP SP PD STORAGE OCCUPANCY
4.2.5.4 S̲u̲b̲-̲P̲a̲c̲k̲a̲g̲e̲ ̲D̲a̲t̲a̲
Data handled by subpackage 4 are listed below according
to the action carried out by the subpackage.
Request of hour statistics.
Data are fetched from the 24 hour sections in the statistics
file, and loaded into a temporary item.
Request of day statistics.
Data are fetched from the current day section in the
statistics file and loaded into a generated temporary
item.
Request of week statistics.
Data are fetched from the week section in the statistics
file and loaded into a generated temporary item.
Figure 4.1.4.2-1 depicts the different data areas containing
the sub-package data illustrated on figure 4.1.4.1.1.1-2.
4.2.5.5 S̲u̲b̲-̲P̲a̲c̲k̲a̲g̲e̲ ̲I̲n̲t̲e̲r̲f̲a̲c̲e̲s̲
Sub-package delivery interfaces to sub-package generate
indirectly, as already described in paragraph 4.2.4.5.
Interface to main program sub-package is described
in paragraph 4.2.2.5.
4.3 M̲E̲M̲O̲R̲Y̲ ̲L̲A̲Y̲-̲O̲U̲T̲
The memory areas pertinent to STP are program area
and data areas. Program area size is 3k word and fully
on-line resident in one PU.
The data areas handled by STP have previously been
defined in subsection 4.1.4 package data. Areas in
question are:
- Shared data area (SDA) (data area), and
- Statistics file area (data area)
which are described in detail taking into account the
present information.
SDA is main memory resident and covers 8 kbytes.
Statistics file area resides on the online disk and
occupies 700 kbytes.
4.3.1 S̲D̲A̲ ̲D̲a̲t̲a̲ ̲A̲r̲e̲a̲
This area contains the actual statistics information
being collected and accumulated. Format for present
seven groups (can be expanded to 10) are as follows:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 1 start addr.
Incoming message area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 2 start addr.
Outgoing message area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ .
Channel availability
and occupancy
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ .
Incoming message distr.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ .
Outgoing message distr.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Use of formats 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 7 start addr.
Use of formats 2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 8 start addr.
FIGURE 4.3.1-1…01…SDA DATA AREA LAY-OUT
Each of the seven present areas is described emphasizing
the lay-out.
4.3.1.1 I̲n̲c̲o̲m̲i̲n̲g̲ ̲M̲e̲s̲s̲a̲g̲e̲ ̲A̲r̲e̲a̲
Area consists of an array of records, one record per
channel and a maximum of 32 channels. Each record contains
a number of fields for accumulation of the statistics
information. The logical lay-out is shown overleaf
following a top down description.
F̲i̲e̲l̲d̲ ̲d̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
a) Number of messages received
b) Summarized message length
c) Number of received messages per precedence level
d) Number of received messages per security classification
e) Number of received messages per special handling
category
f) Number of rejected messages
FIGURE 4.3.1.1-1…01…INCOMING MESSAGE AREA, SDA
For each channel a record exists with fields and subfields
as shown below:
FIGURE 4.3.1.1-2…01…SHARED DATA AREA, GROUP 1 RECORD LAY-OUT
4.3.1.2 O̲u̲t̲g̲o̲i̲n̲g̲ ̲M̲e̲s̲s̲a̲g̲e̲ ̲A̲r̲e̲a̲
As for incoming messages, this area consists of an
array of records. Logical lay-out is shown overleaf,
top down.
F̲i̲e̲l̲d̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
a) Number of messages sent
b) Summarized message length
c) Number of messages sent per precedence level
d) Number of messages sent per security classification
e) Number of messages sent per special handling category
FIGURE 4.3.1.2-1…01…OUTGOING MESSAGE AREA, SDA
R̲e̲c̲o̲r̲d̲ ̲T̲y̲p̲e̲
For each channel a record exists in the outgoing message
group in the shared data area. The record consists
of the following fields and sub-fileds as shown below.
FIGURE 4.3.1.2-2…01…SHARED DATA AREA, GROUP 2 RECORD LAYOUT
4.3.1.3 C̲h̲a̲n̲n̲e̲l̲ ̲A̲v̲a̲i̲l̲a̲b̲i̲l̲i̲t̲y̲ ̲a̲n̲d̲ ̲O̲c̲c̲u̲p̲a̲n̲c̲y̲ ̲A̲r̲e̲a̲
One record per channel with a maximum of 32 channels.
Overleaf an overview diagram shows the top down description
of this area.
F̲i̲e̲l̲d̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲s̲
a) latest open or close indicator (LOCI) opened =
1, 0 = closed.
b) SUMDTG, summation field for open/close transactions.
FIGURE 4.3.1.3-1…01…CHANNEL AVAILABILITY AND OCCUPANCY AREA, SDA
R̲e̲c̲o̲r̲d̲ ̲T̲y̲p̲e̲
For each channel a record exists in group 3, channel
availability and occupancy, in the shared data area.
The record consists of the following fields as shown
below:
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
a b
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1 4
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.1.3-2…01…SHARED DATA AREA, GROUP 3 RECORD LAY-OUT
4.3.1.4 I̲n̲c̲o̲m̲i̲n̲g̲ ̲M̲e̲s̲s̲a̲g̲e̲ ̲D̲i̲s̲t̲r̲i̲b̲u̲t̲i̲o̲n̲ ̲A̲r̲e̲a̲
Next page shows the overview diagram for group number
4. Contents of one record refer to terminal statistics
information. Max. number of terminals is 32.
F̲i̲e̲l̲d̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
a) Number of messages delivered
b) Max. length of messages delivered
c) Summarized message length
d) Number of messages delivered per precedence level
e) Number of messages delivered per classification
f) Number of messages delivered per special handling
category
g) Summarized number of terminals in the distribution
h) Max. number of terminals included in the distribution
i) Number of messages requiring assistance
FIGURE 4.3.1.4-1…01…INCOMING MESSAGE DISTRIBUTION AREA, SDA
R̲e̲c̲o̲r̲d̲ ̲T̲y̲p̲e̲
For each terminal a record exists in group 4, in the
shared data area. The record consists of the following
fields as shown below.
FIGURE 4.3.1.4-2…01…SHARED DATA AREA, GROUP 4 RECORD LAY-OUT
4.3.1.5 O̲u̲t̲g̲o̲i̲n̲g̲ ̲M̲e̲s̲s̲a̲g̲e̲ ̲D̲i̲s̲t̲r̲i̲b̲u̲t̲i̲o̲n̲ ̲A̲r̲e̲a̲
Overview diagram describing the logical contents of
group number 5 is shown overleaf. Each record contains
terminal statistics information. A maximum of 32 terminals
may be present.
F̲i̲e̲l̲d̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
a) Number of messages locally received
b) Max. length of messages locally received
c) Summarized message length
d) Number of messages locally received per precedence
level
e) Number of messages locally received per classification
f) Number of messages locally received per special
handling category.
g) Summarized number of terminals in the local distribution.
h) Max. number of terminals included in the local
distribution
i) Number of messages requiring assistance
FIGURE 4.3.1.5-1…01…OUTGOING MESSAGE DISTRIBUTION, SDA
R̲e̲c̲o̲r̲d̲ ̲T̲y̲p̲e̲
For each terminal a record exists in group 5, in the
shared data area, for accumulation of statistics information.
The record consists of the following fields as shown
below.
FIGURE 4.3.1.5-2…01…SHARED DATA AREA, GROUP 5 RECORD LAY-OUT
4.3.1.6 U̲s̲e̲ ̲o̲f̲ ̲F̲o̲r̲m̲a̲t̲s̲,̲ ̲T̲y̲p̲e̲ ̲1̲ ̲A̲r̲e̲a̲
This area is 4 levels deep as shown overleaf. Each
terminal area is split into 5 format records corresponding
to the formats in question.
F̲i̲e̲l̲d̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
a) Number of times in use for format
b) Summarized duration time for format
c) Max. duration time for format
d) Number of time in use per precedence level
e) Number of times in use per security classification
FIGURE 4.3.1.6-1…01…USE OF FORMATS TYPE 1, SDA
R̲e̲c̲o̲r̲d̲ ̲T̲y̲p̲e̲
For each terminal a record exists in the shared data
area, for accumulation of the use of the format. The
record consists of the following fields as shown below.
FIGURE 4.3.1.6-2…01…SHARED DATA AREA, GROUP 6 RECORD LAY-OUT
4.3.1.7 U̲s̲e̲ ̲o̲f̲ ̲F̲o̲r̲m̲a̲t̲s̲,̲ ̲T̲y̲p̲e̲ ̲2̲ ̲A̲r̲e̲a̲
A 4 levels deep partitioning of the area is present
as shown overleaf in overview diagram. The extra partition
is caused by terminals and associated formats.
F̲i̲e̲l̲d̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
a) Number of times in use for format
FIGURE 4.3.1.7-1…01…USE OF FORMATS TYPE 2, SDA
R̲e̲c̲o̲r̲d̲ ̲T̲y̲p̲e̲
For each terminal a record exists in the shared data
area, for accumulation of the use of formats type 2.
The record consists of the following fields as shown
below.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
a
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.1.7-2…01…SHARED DATA AREA, GROUP 7 RECORD LAYOUT
4.3.2 S̲T̲P̲ ̲F̲i̲l̲e̲ ̲A̲r̲e̲a̲ ̲(̲D̲a̲t̲a̲ ̲A̲r̲e̲a̲)̲
This disk resident file keeps the STP information used
for generation of hourly, daily, and weekly statistics.
The produced statistics are kept in the file as well.
Overall structure of STP file data area is shown overleaf.
Each one of the 10 interval sections is equal to the
structure of SDA described in sub-section 4.3.1.
During this sub-section each of the later section is
outlined. Format of different sections, hour, day,
and week section is equal and therefore only described
once.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ i̲n̲f̲o̲ ̲a̲r̲e̲a̲ ̲ ̲ ̲ ̲
data area
1. interval section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲.̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
10. interval section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1. hour section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲.̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
24. hour section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1. day section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲.̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
7. day section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1. week section
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2-1…01…STP FILE, DATA AREA
4.3.2.1 G̲r̲o̲u̲p̲ ̲1̲ ̲L̲a̲y̲-̲O̲u̲t̲
Incoming messages per channel, maximum of 32 channels.
Size each channel: 68 bytes
Size group 1: 2176 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 32 group 1 area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.1-1
4.3.2.2 G̲r̲o̲u̲p̲ ̲2̲ ̲L̲a̲y̲-̲O̲u̲t̲
Outgoing messages per channel. Maximum of 32 channels.
Size each channel: 66 bytes
Size group 2: 2112 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 32 group 2 area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.2-1
4.3.2.3 G̲r̲o̲u̲p̲ ̲2̲a̲
Storage occupancy.
Maximum of 1 storage location per section group 2a:
2 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲
a
̲ ̲ ̲ ̲ ̲ ̲ ̲
group 2 a record lay-out
2
̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.3-1
4.3.2.4 G̲r̲o̲u̲p̲ ̲3̲
Channel availability and occupancy. Maximum of 32 channels.
Size each channel: 4 bytes
Size group 3: 128 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel N group 3 area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
a b
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
2 2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Channel/record lay-out
FIGURE 4.3.2.4-1
4.3.2.5 G̲r̲o̲u̲p̲ ̲4̲
Incoming message distribution per terminal maximum
of 32 channels.
Size each channel: 74 bytes
Size group 4: 2368 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel N group 4 area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.5-1
4.3.2.6 G̲r̲o̲u̲p̲ ̲4̲a̲
Incoming message distribution, total system maximum
of 1 record.
Size of record: 74 bytes
Size group 4a: 74 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
total system group 4a area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.6-1
4.3.2.7 G̲r̲o̲u̲p̲ ̲5̲
Outgoing message distribution per terminal maximum
of 32 channels.
Size each channels: 74 bytes
Size group 5: 2368 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
channel N group 5 area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.7-1
4.3.2.8 G̲r̲o̲u̲p̲ ̲5̲a̲
Outgoing message distribution, total system maximum
of 1 record.
Size of record: 74 bytes
Size group 5a: 74 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
total system group 5a area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.8-1
4.3.2.9 G̲r̲o̲u̲p̲ ̲6̲
Use of formats, type 1 per terminal maximum of 32 terminals.
Size each terminal: 28 bytes
Size sub-group N: 896 bytes
Size group 6: 4480 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 1, format A
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 2, format C1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 3, format G1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 4, format M
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 5, format O
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 6 area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
terminal 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
terminal N subgroup N area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.9-1
4.3.2.10 G̲r̲o̲u̲p̲ ̲6̲a̲
Use of formats, type 1 total system maximum of 1 record.
Size of record: 28 bytes
Size of sub-group: 28 bytes
Size of group 6a: 140 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 1, format A
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 2, format C1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 3, format G1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 4, format M
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 5, format O
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 6a area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
total system subgroup N area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
FIGURE 4.3.2.10-1
4.3.2.11 G̲r̲o̲u̲p̲ ̲7̲
Use of formats, type 2 per terminal maximum of 32 terminals.
Size each terminal: 2 bytes
Size subgroup N: 64 bytes
Size group 7: 768 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 1, format B
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 2, format D
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 3, format F
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 4, format G2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 5, format H
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 6, format I1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 7, format I2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 8, format N
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 9, format P1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 10, format P2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 11, format Q
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 12, format R
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 7 area
FIGURE 4.3.2.11-1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
terminal 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
.
.
.
.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
terminal N subgroup N area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲
a
̲ ̲ ̲ ̲ ̲ ̲ ̲
2
̲ ̲ ̲ ̲ ̲ ̲ ̲ terminal/record lay-out
FIGURE 4.3.2.11-2
4.3.2.12 G̲r̲o̲u̲p̲ ̲7̲a̲
Use of formats, type 2 total system maximum of 1 record.
Size each record: 2 bytes
Size Sub-group N: 2 bytes
Size group 7a: 24 bytes
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 1, format A
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 2, format D
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 3, format F
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 4, format G2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 5, format H
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 6, format I1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 7, format I2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 8, format N
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 9, format P1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 10, format P2
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 11, format Q
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
subgroup 12, format R
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ group 7a area
FIGURE 4.3.2.12-1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
total system subgroup N area
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲
a
̲ ̲ ̲ ̲ ̲ ̲ ̲
2
̲ ̲ ̲ ̲ ̲ ̲ ̲ terminal/record lay-out
FIGURE 4.3.2-12-2
A P P E N D I X A
A.1 S̲P̲E̲C̲I̲F̲I̲C̲ ̲I̲N̲P̲U̲T̲ ̲D̲A̲T̲A̲
Application packages contributing with statistics information
delivered to STP collection sub-package are:
- Traffic Handling, THP
- CAMPS System Function, CSF
- Message Distribution, MDP
- Terminal Package, TEP
- System Status and Control, SSC
A.1.1 T̲H̲P̲ ̲C̲o̲n̲t̲r̲i̲b̲u̲t̲i̲o̲n̲
THP delivers a statistics record related to each of
the following groups:
- incoming messages per channel
- outgoing messages per channel
A.1.2 C̲S̲F̲ ̲C̲o̲n̲t̲r̲i̲b̲u̲t̲i̲o̲n̲
CSF delivers a statistics record related to the following
group:
- storage occupancy
A.1.3 M̲D̲P̲ ̲C̲o̲n̲t̲r̲i̲b̲u̲t̲i̲o̲n̲
MDP delivers a statistics record related to each of
the following groups:
- incoming message distribution per terminal
- outgoing messag distribution per terminal
A.1.4 T̲E̲P̲ ̲C̲o̲n̲t̲r̲i̲b̲u̲t̲i̲o̲n̲
TEP delivers a statistics record related to each of
the following groups:
- use of message formats, type 1
- use of message formats, type 2
A.1.5 SSC Contribution
SSC delivers a statistics record related to each of
the following groups:
- use of message formats, type 2, format I1 and format
I2.
A.2 W̲H̲A̲T̲ ̲T̲O̲ ̲C̲O̲L̲L̲E̲C̲T̲
The information to be collected, delivered by the previously
mentioned packages, is listed below. Data are delivered
in form of a record consisting of a header and a variable
number of parameters.
A.2.1 R̲e̲c̲o̲r̲d̲ ̲H̲e̲a̲d̲e̲r̲
Identify the event and involved equipment. The header
parameters are:
a) Group Number
Group number identifies which of the following
groups the parameters are related to:
Group Category
1 Incoming messages per channel
2 Outgoing messages per channel
3 Storage occupancy
4 Channel availability and occupancy
5 Incoming message distribution per terminal
6 Outgoing message distribution per terminal
7 Use of message formats, type 1
8 Use of message formats, type 2
Format of number is an integer (1:8).
b) S̲u̲b̲-̲g̲r̲o̲u̲p̲ ̲N̲u̲m̲b̲e̲r̲
Sub-group number identifies which of the formats
from group 7 or 8 (use of formats) the parameters
are related to. Format of number is an interger
(1:200). For group 7 numbers are as follows:
1 equal to format A
2 equal to format C1
3 equal to format G1
6 equal to format M
8 equal to format O
For group 8 numbers are as follows:
20 equal to format B
60 equal to format D
40 equal to format F
23 equal to format G2
5 equal to format H
100 equal to format I1
101 equal to format I2
2 equal to format N
9 equal to format P1
41 equal to format P2
10 equal to format Q
11 equal to format R
c) R̲e̲c̲o̲r̲d̲ ̲N̲u̲m̲b̲e̲r̲
The record number identifies which of the equipment
i.e. channel or terminal, the parameters are related
to. Format of number is an integer (1:32).
A.2.2 R̲e̲c̲o̲r̲d̲ ̲P̲a̲r̲a̲m̲e̲t̲e̲r̲s̲
Parameters are grouped as specified in 6.1.1.2.1. The
following groups and contents are present.
G̲r̲o̲u̲p̲ ̲1̲
Incoming messages per channel
- message length, integer (0:12000)
- precedence level, integer (1:6), level routine
equal to 6, and level super flash equal to 1.
- classification category, integer (0:4), unclassified
equal to 0, and cosmic top secret equal to 4.
- special handling category, format: byte:
bit equal to 1, specifies that corresponding special
handling designator is present for the message.
LSB bit 0 corresponds to ATOMAL
bit 1 " " data message
bit 2 " " crypto security
bit 3 " " Exclusive
bit 4 " " Eyes only
bit 5 " " -
bit 6 " " -
MSB bit 7 " " -
- Message rejected indicator, integer (0:1), message
not rejected equal to 0, message rejected equal
to 1.
G̲r̲o̲u̲p̲ ̲2̲
Outgoing messages per channel
- message length, integer (0:12000)
- precedence level, integer (1:6), level routine
equal to 6, and level super flash equal to 1.
- classification category, integer (0:4), unclassified
equal to 0, and cosmic top secret equal to 4.
- special handling category, format: byte:
bit equal to 1, specifies that corresponding special
handling designator is present for the message.
LSB bit 0 corresponds to ATOMAL
bit 1 " " data message
bit 2 " " crypto security
bit 3 " " Exclusive
bit 4 " " Eyes only
bit 5 " " -
bit 6 " " -
MSB bit 7 " " -
G̲r̲o̲u̲p̲ ̲3̲
Storage Occupancy
- occupancy, integer (0:100)
G̲r̲o̲u̲p̲ ̲4̲
Channel availability and occupancy
- open/close indicator integer (0:1), close indicator
equal to 0, open indicator equal to 1.
- open/close time, minutes since 2400, integer (0:1440)
G̲r̲o̲u̲p̲ ̲5̲
Incoming messages per distribution
- message length, integer (0:12000)
- precedence level, integer (1:6), level routine
equal to 6, and level super flash equal to 1.
- classification category, integer (0:4), unclassified
equal to 0, and cosmic top secret equal to 4.
- special handling category, format: byte:
bit equal to 1, specifies that corresponding special
handling designator is present for the message.
LSB bit 0 corresponds to ATOMAL
bit 1 " " data message
bit 2 " " crypto security
bit 3 " " Exclusive
bit 4 " " Eyes only
bit 5 " " -
bit 6 " " -
MSB bit 7 " " -
- number of terminals in the distribution of the
message, integer (0:32)
- message requiring assistance indicator, integer
(0,1), no assistance equal to 0, assistance required
equal to 1.
G̲r̲o̲u̲p̲ ̲6̲
Outgoing messages per distribution
- message length, integer (0:12000)
- precedence level, integer (1:6), level routine
equal to 6, and level super flash equal to 1.
- classification category, integer (0:4), unclassified
equal to 0, and cosmic top secret equal to 4.
- special handling category, format: byte:
bit equal to 1, specifies that corresponding special
handling designator is present for the message.
LSB bit 0 corresponds to ATOMAL
bit 1 " " data message
bit 2 " " crypto security
bit 3 " " Exclusive
bit 4 " " Eyes only
bit 5 " " -
bit 6 " " -
MSB bit 7 " " -
- number of terminals in the distribution of the
message, integer (0:32)
- message requiring assistance indicator, integer
(0:1), no assistance equal to 0, assistance required
equal to 1.
G̲r̲o̲u̲p̲ ̲7̲
Use of formats 1
- duration time minutes, integer (0:1440)
- precedence level, integer (1:6), level routine
equal to 6, level superflash equal to 1
- classification category, integer (0:4), unclassified
equal to 0, cosmic top secret equal to 4.
G̲r̲o̲u̲p̲ ̲8̲
Use of formats 2
- no parameters delivered.
