DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦a5b49775a⟧ Wang Wps File

    Length: 10105 (0x2779)
    Types: Wang Wps File
    Notes: Spelunked
    Names: »~ORPHAN55.00«

Derivation

└─⟦12f38d4ad⟧ Bits:30006052 8" Wang WCS floppy, CR 0081A
    └─ ⟦this⟧ »~ORPHAN55.00« 

WangText

:…00……00……00……00…7…02…7
7 7…07…6…0b…6…00…6…05…5…0a…5…0e…5
4…08…4…0d…4…02…4…06…3…0b…3…00…3…01…3…02…3
3 3…05…3…06…3…07…2…08…2…09…2…0a…2…0b…2…0c…2…0d…2…0e…2…0f…2…02…2…07…1…0c…1…0e…1
1…07…0…0b…0…00…0 /…08…/…0c…/…0d…/…86…1                                             …02…           …02…   …02…        

…02…CPS/TPR/008

…02…840102…02……02…
FUNCTIONAL SOFTWARE TEST SPECIFICATION
AND PROCEDURES…02…ISSUE 1.1…02…CAMPS







3.7      T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲7̲




3.7.1    G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲

         This testgroup will give a verification of the CAMPS
         operator function as listed below:

         a)  PU reconfiguration

         b)  Operator comands direct to the watchdog

         c)  Peripheral reconfiguration

         d)  Software commands (e.g. patch, trace mask)

         e)  Start - up and Error Handling

         f)  Expandability



3.7.2    T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲

         Execution of this testgroup will be controlled by manual
         opertion of the operator functions.



3.7.2.1  I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲

         N.A.



3.7.2.2  I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲

         All commands related to the operator functions will
         be exercised.

         Test halt or interruption can be accomplished by execution
         of the "Cancel" function.…86…1         …02…   …02…   …02…   …02…      
                                             
3.7.2.3  O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲

         System status information is displayed on the operator
         VDU and detailed error reports system printout and
         logs are printed at the operator's printer.



3.7.24   O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         All output on the operator's VDU and printer shall
         be in accordance with CPS/230/ICD/0002. Any output
         not in accordance with this document will be due to
         departure from the specified system function.



3.7.3    T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲s̲


3.7.3.1  T̲e̲s̲t̲ ̲S̲e̲t̲u̲p̲

         This test procedure describes the start-up of the CAMPS
         system. The mirrored disks and the offline disk have
         to be physical mounted prior to the execution of the
         test procedures.



3.7.3.2  T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲

         The operatorshall via the OP ̲VDU issue the commands
         according to test 7/a.…86…1         …02…   …02…   …02…   …02…         
            …02…           …02… …02…  …02…            

T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                    T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲

Test Case/
Reference        Action                          SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1            Start ̲up DEAD 1,
             with initial (AP+SYS) SW          3.2.4.6

2,4,10       Emergency Close ̲down

3            Start ̲up COLD with initia
             (AP+SYS) SW

5            Start ̲up DEAD 2 with modi-
             fied (AP+SYS) SW

6,16         Close ̲down

7            Start ̲up STANDBY PU (initial SW)

8            Start ̲up WARM 1 with modified
             (AP+SYS) software

9,14         Close ̲down STANDBY PU

11           Start ̲up STANDBY PU (modified
             SYS SW)
12           Start ̲up DEAD 1 with modified
             SYS software and initial AP SW

13           Emergency Close ̲down

15           Start ̲up DEAD 1 with initial
             SYS software and modified AP SW

17           Start ̲up WARM 3 with initial 
             SYS SW and modified AP SW

18           Attempt to Start ̲upboth PU's as active

19           Start ̲up Standby PU (with initial SYS SW)

20           Switchover from the Active PU to the
             Standby PU…86…1         …02…   …02…   …02…   …02…             …02…    
                   …02… …02…  …02…                

T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1      OP ̲VDU      #COMMAND# BOOT CI,OF      1.Log of the
                     #ENTER#                     command 
                                                 and version
                                                 of YS 
                                                 SW (Annex 1.1)

1.2      OP ̲VDU      #COMMAND# STAC #ENTER#    1.Display format
                                               STAC
                                                 (Fig.7/a)-1

1.3      OP ̲VDU      Enter data from fig.      1.Log of command,
                                               DTG 
                     7/a)-1 #ENTER#                 and version
                                                    of AP SW
                                                 (Annex 1.1)

                                               2.Updating of
                                               config
                                                 display.

                                               3.Format display
                                               
                                                 cleared

1.4                  Perform Terminal and
                     Traffic Activity

2.1      OP ̲VDU      #COMMAND# CLOS #ENTER#    1.Display format
                                               CLOS
                                                 (Fig.7/a)-2

2.2      OP ̲VDU      Enter data from fig.      1.Log of command
                                               and
                     7/a)- #ENTER#             DTG
                                               2.Config.display
                                               
                                                 cleared
                                               3.Format display
                                                 cleared
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:



                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR…86…1
                                                       …02…   …02… 
                                                …02…   …02…        
                                                   …02…        
                                                 …02… …02…  …02…       
                                                       
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expectd Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

3.1      OP ̲VDU      #COMMAND# BOOT CI,ON      1.Log of the
                                               command
                     #ENTER#                     and version
                                                 of 
                                                 SYS. SW.

3.2      OP ̲VDU      #COMMAND# STAC #ENTER#    1.Display format
                                               STAC
                                                 Fig.7/a)-3)

3.3      OP ̲VDU      Enter data from fig.      1.Log of the
                                               command,
                     7/a)-3 #ENTER#              DTG and version
                                                 of
                                                 AP. SW

                                               2.Updating of
                                               config.
                                                 display

                                               3.Format split
                                               cleared

3.4      SUP ̲VDU     Verify System Parameters

4.1      OP ̲VDU      a 2.1

4.2      OP ̲VDU      as 2.2

5.1      OP ̲VDU      #COMMAND# BOOT CM,OF
                     #ENTER#                   1.Log of the
                                               command 
                                                 and version
                                                 of 
                                                 SYS. SW

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:




                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TST  QA  QAR…86…1
                                                       …02…   …02… 
                                                …02…   …02…        
                                                   …02…        
                                                 …02… …02…  …02…       
                                                       
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expectd Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

5.2      OP ̲VDU      as 1.2

5.3      OP ̲VDU      Enter data from           1.Log of the
                                               command
                     fig.7/a)-4 #ENTER#          DTG and version
                                                 of AP.SW

                                               2.Updating of
                                               config.
                                                 dispay

                                               3.Format split
                                               cleared

5.4      VDU 21      Verify system Parameters

5.5                  Perform terminal and 
                     traffic activity

6.1      OP ̲VDU      #COMMAND# CLOS #ENTER#    1.Display format
                                               CLOS
                                                 (Fig.7/a)-5)

6.2      OP ̲VDU      Enter data from fig.      1.Log of commad
                                               and 
                     7/a)-5 #ENTER#              DTG
                                               2.Config.display
                                               
                                                 cleared
                                               3.Format display
                                                 cleared


 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:




                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR…86…1
                                                       …02…   …02… 
                                                …02…   …02…        
                                                   …02…        
                                                 …02… …02…  …02…       
                                                       
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expectd Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

6.3      VDU 1       Message Preparation 
                     Reception

7.1      OP ̲VDU      #COMMAND# (PU#2)          1.'Communication
                                               to
                     #ENTER#                     PU#2' displayed
                                                 on
                                                 the command
                                                 split

7.2      OP ̲VDU  #COMMAND# BOOT CI,ON          1.Log of command
                     #ENTER#                     and 
                                                 version of
                                                 SW

7.3      OP ̲VDU      #COMMAND# STSB# ENTER#    1.Display format
                                               STSB
                                                 (Fig.7/a)-6)

7.4      OP ̲VDU      Enter data from fig.      1.Log of command
                                               
                     7/a)-6 #ENTER#              and DTG

7.5      OP ̲VD       #COMMAND# (PU#1) #ENTER#  1.'Communication
                                               to 
                                                 PU#1' displayed
                                                 on the command
                                                 split

8.1      OP ̲VDU      #COMMAND# BOOT CM,ON      1.Log of command
                                               and
                     #ENTER#                     version of
                                                 SYS SW

8.2      OP ̲VDU      #COMMAND# STAC #ENTER#    1.Display format
                                               STAC
                                                 (Fi. 7/a)-7,empty)

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:




                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR…86…1
                                                       …02…   …02… 
                                                …02…   …02…        
                                                   …02…        
                                                 …02… …02…  …02…       
                                                       
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expectd Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

8.3      OP ̲VDU      Enter data from           1.Log of command,DTG
                     fig.7/a)-7 #ENTER#          and version
                                                 of AP.SW
                                               2.Config.display
                                                 updated
                                               3.Format display
                                               
                                                 clared

8.4                  Verify historical data;
                     Use Retrieval Procedure

8.5      VDU 1       Verify messages in queues,
                     on user VDU display

8.6      VDU 21      Verify system parameters,
                     use search procedure

9.1      OP ̲VDU      #COMMAND# CLOS #ENTER#    1.Display format
                                               CLO 
                                                 (Fig. 7/a)-8,empty)

9.2      OP ̲VDU      Enter data from           1.Log of command
                                               and 
                     fig.7/a)-8 #ENTER#          DTG

10.1     OP ̲VDU      As 2.1

10.2     OP ̲VDU      As 2.2


 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:




                                               T̲E̲S̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR…86…1
                                                       …02…   …02… 
                                                …02…   …02…        
                                                   …02…        
                                                 …02… …02…  …02…       
                                                       
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expectd Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

11.1     OP ̲VDU      #COMMAND# (PU#2)          1.'Communication
                                               to 
                     #ENTER#                     PU#2' display
                                                 on the command
                                                 split

11.2     OP ̲VDU      #COMMAND# BOOT CM,OF      1.Log of command
                                               and
                     #ENTE#                      version of
                                                 SYS SW

11.3     OP ̲VDU      #COMMAND# STSB #ENTER#    1.Display format
                                               STSB
                                                 (Fig.7/a)-9)

11.4     OP ̲VDU      Enter data from           1.Log of Command,
                                               DTG
                     fig.7/a)-9 #ENTER#

11.5     OP ̲VDU      #COMMAND# (PU# 1)         1.'Communication
                                               to 
                     #ENTER#                     PU#1'displayed
                                                 on
                                                 the command
                                                 split

12.1     OP ̲VDU      #COMMAND# BOOT CM,OF      1.Log of command
                                               and
                     #ENTER#                     version of
                                                 SYS.SW

12.2     OP ̲VDU      As 1.2




 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
COMMENTS:




                                               T̲E̲S̲T̲ ̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST  QA  QAR…86…1
                                                       …02…   …02… 
                                                …02…   …02…        
                                                   …02…        
                                                 …02… …02…  …02…       
                                                       
T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                       T̲E̲S̲T̲ ̲N̲O̲.̲ ̲7̲/̲a̲)̲
F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲U̲ ̲R̲e̲c̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲2̲.̲4̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expectd Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

12.3     OP ̲VDU      Enter data from           1.Log of command,
                                               DTG
                     fig.7/a)-10 #ENTER#         and version
                                                 of AP.SW
                                               2.Conf.display
                                               updated
                                               3.Format display
                                               
                                                 cleared
12.4                 Perform terminal and
                     traffic activity

13.1     OP ̲VDU      as 2.1

13.2     OP ̲VDU      as 2.2

14.1     OP ̲VDU      as 9.1

14.2     OP ̲VDU      as 9.2

15.1     OP ̲VDU      #COMMAND# BOOT CI,OF      1.Log of command
                                               and
                     #ENTER#                     version of
                                                 SYS.SW

15.2     OP ̲VDU      As 1.2

15.3