top - download
⟦ae36f026e⟧ Wang Wps File
Length: 2938 (0xb7a)
Types: Wang Wps File
Notes: CPS/SDS/042
Names: »1494A «
Derivation
└─⟦c606dccac⟧ Bits:30005804 8" Wang WCS floppy, CR 0108A
└─⟦this⟧ »1494A «
WangText
…02…CPS/SDS/042
…02…URH/811210…02……02…#
CTDS SYSTEM DESIGN SPECIFICATION
…02……02…CAMPS
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲
1 GENERAL .......................................
4
1.1 PURPOSE ...................................
4
1.2 APPLICABLE DOCUMENTS ......................
4
1.3 TERMS AND ABRREVIATIONS ...................
4
1.3.1 Acronyms ..............................
4
2 CTDS OUTLINE ..................................
5
APPENDIX A
ATES System Design Specification ..............
6
1̲ ̲ ̲G̲E̲N̲E̲R̲A̲L̲
1.1 P̲U̲R̲P̲O̲S̲E̲
The CAMPS Test Drive System (CTDS) System Design Specification
has the purpose:
- to provide the baseline for the detailed design,
and
- to outline the functional capabilities and the
operating procedures.
1.2 A̲P̲P̲L̲I̲C̲A̲B̲L̲E̲ ̲D̲O̲C̲U̲M̲E̲N̲T̲S̲
The following documents are applicable to the extend
specified herein:
CPS/210/SYS/0001, CAMPS System Requirement Specification.
Contract between CR and CRC on supply of TDS, dated
12th March, 1981.
1.3 T̲E̲R̲M̲S̲ ̲A̲N̲D̲ ̲A̲B̲B̲R̲E̲V̲I̲A̲T̲I̲O̲N̲S̲
1.3.1 A̲c̲r̲o̲n̲y̲m̲s̲
Within this document the following definitions apply
for the interpretation of the listed acronyms:
ATES Automatic Test and Emulation System.
Throughout this document ATES is synonymous
with CTDS.
CR Christian Rovsing A/S, Ballerup, Denmark.
CRC Christian Rovsing Corporation,
Thousand Oaks, 91362 Calif., U.S.A.
CTDS CAMPS Test Drive System.
EDC Error Detection and Correction
FCM Frame Control Module
LTU Line Termination Unit
SCM Setup & Control Monitor
TTM Terminal Transducer Module
2̲ ̲ ̲C̲T̲D̲S̲ ̲O̲U̲T̲L̲I̲N̲E̲
The CTDS is designed to emulate the operational environments
of the CAMPS system. It interfaces to all CAMPS external
and internal I/O channels and handles all types of
level 1 and 2 protocols involved herein.
The CTDS can impose on the CAMPS System a workload
which resembles, as closely as possible, the external
traffic generated by NICS-TARE, SCARS II, CCIS and
low speed channels, and the internal traffic generated
from the users' terminal positions.
The workload is specified by means of scripts. The
scripts are written in a specially designed simulation
language SCRIPTGEN. SCRIPTGEN offers the test operator
a wide range of possibilities for specifying workloads,
plus it has a straight forward syntax, that makes it
easy to use.
The detailed System Design Specification is contained
in Appendix A.
A P P E N D I X A…01……01…ATES System Design Specification
