DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦b2c69c466⟧ Wang Wps File

    Length: 62780 (0xf53c)
    Types: Wang Wps File
    Notes: CPS/TPR/005               
    Names: »1529A «

Derivation

└─⟦0d10b442a⟧ Bits:30005805 8" Wang WCS floppy, CR 0109A
    └─ ⟦this⟧ »1529A « 

WangText

6…00……00……00……00…(…0a……00……00…(…0b…(…0f…(…02…(…06…'…0b…'…0c…'…00…' &…08…&…0b…&…0e…&…01…& &…07…%…0a…%…0d…%…02…%…07…$…0a…$…01…$
#…08…#…0d…#…01…#…07…"…0c…"…01…"
"…86…1                                             …02…           …02…   …02…        

…02…CPS/TPR/005

…02…820419…02……02…
DSMT (PROTOTYPE) HARDWARE TEST SPECIFICATION
AND PROCEDURES…02…811218…02…CAMPS








3.5      T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲5̲.



3.5.1    G̲E̲N̲E̲R̲A̲L̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲

         The purpose of this tesgroup is to verify requirements
         to system security as specified in CPS/210/SYS/0001
         sec. 3.4.5.1 and 3.4.5.7.a.

         Requirements to be verified are:

         1.  Special earthing arrangements (CPS/210/SYS/0001,
             sec. 3.4.5.1c.)

         2.  Low level Keying (CPS/210/SYS/0001 sec. 3.4.5.1.d)

         3.  Waveshaping (CPS/210/SYS/0001 sec. 3.4.5.1m-n)

         4.  Detection of unassigned codes
             (CPS/210/SYS/0001 sec. 3.4.5.7.a.1)

         5.  Access protection mechanisms
             (CPS/210/SYS/0001 sec. 3.4.5.7.a.2)

         6.  System state/User state instructions
             (CPS/210/SYS/0001 sec. 3.4.5.7.a.3)

         7.  Key switch (CPS/210/SYS/0001 sec. 3.4.5.7.a.5)

         8.  Read/Write memory erase
             (CPS/210/SYS/001 sec. 3.4.5..7.a.6)




3.5.2    V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲C̲r̲o̲s̲s̲ ̲R̲e̲f̲e̲r̲e̲n̲c̲e̲ ̲I̲n̲d̲e̲x̲ ̲(̲V̲C̲R̲I̲)̲

         The VCRI, table 3.5.2-1, identifies requirements to
         be verified and for each requirement the verification
         method.



3.5.3    R̲e̲f̲e̲r̲e̲n̲c̲e̲d̲ ̲D̲o̲c̲u̲m̲e̲n̲t̲s̲

         1.                 CAMPS SYSTEM REQUIREMENT SPECIFICATION
                            (CPS/210/SYS/0001)

         2.                 CAMPS SYSTEM DESIGN SPECIFICATION
                            (CPS/SDS/001)

         3.                 ACCEPTANCE TEST PROCEDURE FOR V24/V28
                            (L/L) ADAPTER 
                            TYPE 1 AND 2.

         4.                 Techn. Manual for DELTA DATA VDU

         5.                 Techn. Manual for TRACOR MSP

         6.                 Techn. Manual for Adaptor power
                            supply




 REQUIREMENT                               VERIFICATION
                                          METHOD

                                          N/A  EXAM.
                                                      ANAL.
                                                             TEST
 ----------------------------------------------------------------

     3.4.5  Security                           
       3.4.5.1 TEMPEST Acceptance
       3.4.5.1 c Special Earthing                     X
       3.4.5.1 d Low Level Keying                     X
       3.4.5.1 m Waveshaping                          X
       3.4.5.7 System Design
               Requirements
       3.4.5.7 a H/W Design Requirements  
       3.4.5.7 a.1 Unassigned Codes                   X
       3.4.5.7 a.2 Access Protection                  X
       3.4.5.7 a.3 System/User State                  X
       3.4.5.7 a.5 Key Switch                         X
       3.4.5.7 a.6 Memory erase                       X

























                  TABLE 3.5.2-1


3.5.4    T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲s̲



3.5.4.1  T̲e̲s̲t̲ ̲S̲e̲t̲ ̲U̲p̲

         The starting point for execution of this procedure
         is that the system is assembled in accordance with
         the configuration document. One copy of each of the
         documents mentioned in sec. 3.5.3 is present in the
         testroom.

         As the test 5/8 requires part of the system to be powered
         up following setup must be performed prior to the test
         initialization.

         The test 5/8 is performed via an Operator Console (OC)
         which is a printer and keyboard.

         The OC is connected to the system as follows:

             1.  Substitute the leftmost OPTO transceiver in
                 the rack C Adapter crate with a V24/V28(L/L)
                 adapter (1 channel), and connect the OC to
                 the V24 connector on the front panel of the
                 adaptor.

             2.  Remove the two V24 cables from J1 and J4 located
                 on the front panel of the WCA (rear crate of
                 the Watchdog Processor crate).

             3.  Connect the two V24 cables via a short extension
                 cable.

         The OC is now connected to the V24 port on the MIA
         in the rear crate of PU#1 (ref. fig. 3.5.4.1-1).

















































                     FIGURE 3.5.4.1-1

            C̲o̲n̲n̲e̲c̲t̲i̲o̲n̲ ̲o̲f̲ ̲t̲h̲e̲ ̲O̲p̲e̲r̲a̲t̲o̲r̲ ̲C̲o̲n̲s̲o̲l̲e̲


         Carry out/control the following:

         a)  OC Set up:

             The communication part of the OC is set to:

             1)  Asynchronous communication
             2)  7 bit character length
             3)  Even parity check/generation
             4)  1 stop bit
             5)  1200 Baud communication speed

         b)  Switch settings in PU#1 front crate modules:

             1)  The NRM/MAIN switch on the MAP module front
                 panel is set to MAIN.

             2)  The EN/DIS switch on the MAP module front panel
                 is set to DIS.

         c)  Switch settings in PU#1 rear crate modules:

             1)  The Baudrate select switches 1-4 (S1) on the
                 MAP Interface Adapter (MIA) Printed Circuit
                 Board (PCB) is set to #7 which corresponds
                 to a transmission speed of 1200 Baud:

                 Switch 1:  OPEN
                 Switch 2:  OPEN
                 Switch 3:  OPEN
                 Switch 4:  CLOSED

             2)  The EN/DIS switch on the Configuration Control
                 Adaptor (CCA) front panel is set to DIS.



         d)  Setting of power switches in Computer racks:

             1)  Power switch (2) on each Mains switch is set
                 to OFF.

             2)  Power switch (2) in the rear crate of PU#1
                 is set to "ON"

             3)  Power switch (2) in the rear crate of the CU
                 is set to "OFF"

             4)  Power switch (2) in the rear panel of the RACK
                 A 80D fan unit is set to "ON".

             5)  Power switch (2) in the rear crate of the Adaptor
                 Crate is set to "ON"

             6)  Power switch (1) in the rear panel of the RACK
                 B 80S Blower Unit is set to "ON"

             7)  Power switch (1) on each PU#1 CR80D Power supply
                 (2 front crate mounted modules) is set to "ON".

3.5.4.2  T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲

         The testengineers and the testwitnesses are in the
         testroom and ready to perform and supervise the test.

3.5.4.3  T̲e̲s̲t̲ ̲S̲t̲e̲p̲s̲

         The teststeps to be performed for testgroup no. 5 are
         given in the following preceded by a testoverview.





T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲5̲)̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲e̲c̲u̲r̲i̲t̲y̲ ̲r̲e̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲                                   
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                Special earthing arrange-     sec. 3.4.5.1.c
                 ments.

2                Low level keying              sec. 3.4.5.1.d

3                Waveshaping                   sec. 3.4.5.1.m-n

4                Detection of unassigned       sec. 3.4.5.7.a.1
                 codes

5                Access protection mechanisms  sec. 3.4.5.7.a.2

6                System/User state instruc-    sec. 3.4.5.7.a.3
                 tions

7                Key Switch                    sec. 3.4.5.7.a.5

8                Read/Write memory erase       sec. 3.4.5.7.a.6




T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲1̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲E̲a̲r̲t̲h̲i̲n̲g̲ ̲A̲r̲r̲a̲n̲g̲e̲m̲e̲n̲t̲s̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲1̲ ̲c̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1      N/A         Examine ref. 2
                     (Secs. 5.5.5.2.4,
                     5.2.2.6, and
                     5.1.4.1.9), ref. 3
                     and ref. 6.               Conformance with
                                               the requirements.





















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲2̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲L̲o̲w̲ ̲L̲e̲v̲e̲l̲ ̲K̲e̲y̲i̲n̲g̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲1̲ ̲d̲ ̲a̲n̲d̲ ̲3̲.̲4̲.̲5̲.̲1̲ ̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

2.1      N/A         Examine ref. 3 for
                     verification of
                     low level keying          Conformance with
                                               the requirements
                                               in SRS
                                               Reference























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲3̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲W̲a̲v̲e̲s̲h̲a̲p̲i̲n̲g̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲1̲ ̲m̲ ̲a̲n̲d̲ ̲3̲.̲4̲.̲5̲.̲1̲ ̲n̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

3.1      N/A         Examine ref. 3 for
                     verification of
                     waveshaping               Conformance with
                                               the requirements
                                               in SRS
                                               Reference























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲4̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲H̲/̲W̲ ̲D̲e̲s̲i̲g̲n̲,̲ ̲D̲e̲t̲e̲c̲t̲i̲o̲n̲ ̲o̲f̲ ̲u̲n̲a̲s̲s̲i̲g̲n̲e̲d̲
 ̲c̲o̲d̲e̲s̲.̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲7̲ ̲a̲.̲1̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

4.1      N/A         Examine ref. 2
                     sec. 5.1.4.1.3.1          Conformance with
                                               the requirements
                                               in SRS
                                               Reference
























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲5̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲H̲/̲W̲ ̲D̲e̲s̲i̲g̲n̲,̲ ̲A̲c̲c̲e̲s̲s̲ ̲p̲r̲o̲t̲e̲c̲t̲i̲o̲n̲.̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲7̲ ̲a̲.̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

5.1      N/A         Examine ref. 2
                     sec. 5.1.4.1.4.1          Conformance with
                                               the requirements
                                               in SRS
                                               Reference
























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲6̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲H̲/̲W̲ ̲D̲e̲s̲i̲g̲n̲,̲ ̲S̲y̲s̲t̲e̲m̲ ̲s̲t̲a̲t̲e̲/̲U̲s̲e̲r̲ ̲s̲t̲a̲t̲e̲.̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲7̲ ̲a̲.̲3̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

6.1      N/A         Examine ref. 2
                     sec. 5.1.4.1.4.1 and
                     Sec. 5.1.4.1.3.1          Conformance with
                                               the requirements
                                               in SRS
                                               Reference























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲7̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲H̲/̲W̲ ̲D̲e̲s̲i̲g̲n̲,̲ ̲T̲e̲r̲m̲i̲n̲a̲l̲ ̲K̲e̲y̲ ̲S̲w̲i̲t̲c̲h̲.̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲7̲ ̲a̲.̲5̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

7.1      N/A         Examine ref. 4            Conformance with
                                               the requirements

7.2      N/A         Examine ref. 5            Conformance with
                                               the requirements























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲8̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲H̲/̲W̲ ̲D̲e̲s̲i̲g̲n̲,̲ ̲R̲e̲a̲d̲/̲w̲r̲i̲t̲e̲ ̲m̲e̲m̲o̲r̲y̲ ̲e̲r̲a̲s̲e̲.̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲7̲ ̲a̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

8.1      N/A         Power Up the OC.
                     The rightmost power       OC print out:
                     switch on RACK A and C    07 MAP/BIT:OK
                     Mains switch is set       *
                     to "ON".

8.2      OC          Enter from the OC:
                     M 91 E800 0002(CR)003F
                     M 90 0FC0 0001(CR)0001
                     M E1 0000 0100(CR)A5A5
                     M 60 0000 0100(CR)        256 words equal
                                               to A5A5 is dumped
                                               on the OC.

8.3      N/A         The rightmost power       
                     switch on RACK A          
                     Mains switch is set       
                     to "OFF". Wait until
                     all power indicators are
                     off.








 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲5̲/̲8̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲H̲/̲W̲ ̲D̲e̲s̲i̲g̲n̲,̲ ̲R̲e̲a̲d̲/̲w̲r̲i̲t̲e̲ ̲m̲e̲m̲o̲r̲y̲ ̲e̲r̲a̲s̲e̲.̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲4̲.̲5̲.̲7̲ ̲a̲.̲6̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

8.4      N/A         The rightmost power       OC print out:
                     switch on RACK A          07 MAP/BIT:OK
                     Mains switch is set       *
                     to "ON".

8.5      OC          Enter from the OC:
                     M 91 E800 0002(CR)003F
                     M 90 0FC0 0001(CR)0001
                     M E1 0000 0100(CR)A5A5
                     M 60 0000 0100(CR)        Some words different
                                               from A5A5 are
                                               dumped on the
                                               OC terminated
                                               with a parity
                                               error indication
                                               (P).

8.6      N/A         The rightmost power       
                     switch on RACK A          
                     Mains switch is set       
                     to "OFF". Wait until
                     all power indicators are
                     off.







 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR


3.5.4.4  T̲e̲s̲t̲ ̲T̲e̲r̲m̲i̲n̲a̲t̲i̲o̲n̲

         Power Down the DSMT system as Follows:

         a)  The Power Switch on the RACK C Mains Switch is
             set to "OFF".

         b)  Power Down the OC.

         c)  Disconnect the OC from the leftmost V24/V28(L/L)
             adaptor in the Adaptor crate of rack C, and replace
             this adaptor with the originally mounted OPTO transceiver.

         d)  Disconnect the two V24 cables (at the WDP rear
             crate), remove the short extension cable and reconnect
             the two cables to J1 and J4 respectively.



3.6      T̲E̲S̲T̲ ̲G̲R̲O̲U̲P̲ ̲N̲O̲.̲ ̲6̲



3.6.1    G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲

         This testgroup will give a verfification of the following
         requirements:

         a)  CR produced Equipment

         b)  Subcontractor Produced Equipment

         c)  Products from Other Suppliers

         d)  Special Requirements for the CAMPS System

              1) Materials
              2) Interchangeability
              3) Bench Handling
              4) Cover Plates
              5) Cabling and Fittings, Shield Continuity
              6) Cabling and Fittings, Wiring identification
              7) Cabling and Fittings, Bus bars
              8) Cabling and Fittings, CR part Numbers
              9) Flux and Soldering, Flux
             10) Flus and Soldering, Soldering
             11) Ventilation and Cooling, Intake and Exhaust
             12) Ventilation and Cooling, Resonance
             13) Ventilation and Cooling, Air Filters
             14) Accessibility, Parts Inside Containers
             15) Accessibility, Withdrawal Slides
             16) Accessibility, Plug-in Board Extractors
             17) Testpoints, Banana Plug
             18) Test points, Measuring/Injection
             19) Personnel Safety, Interlocks
             20) Personnel Safety, Excess of 30 Volts
             21) Personnel Safety, Marking
             22) Personnel Safety, Warning Principles
             23) Equipment Safety, Circuit Breakers
             24) Equipment Safety, Protection of Equipment
             25) Equipment Safety, Fuse location and indication
             26) Grounding, Three Ground Circuits
             27) Grounding, AC Power Neutral
             28) Grounding, Panels, Drawers and Subassemblies
             29) Grounding, Signalling and Contact Ground
             30) Nameplates and Product Marking
             31) Controls
             32) Acoustic Noise



3.6.2    V̲e̲r̲i̲f̲i̲c̲a̲t̲i̲o̲n̲ ̲C̲r̲o̲s̲s̲ ̲R̲e̲f̲e̲r̲e̲n̲c̲e̲ ̲I̲n̲d̲e̲ ̲(̲V̲C̲R̲I̲)̲

         The verification methods to be applied for each of
         the requirements are indicated in the VCRI shown in
         table 3.6.2-1 through 3.6.2-3




 REQUIREMENT                               VERIFICATION
                                          METHOD

                                          N/A  EXAM.
                                                      ANAL.
                                                             TEST
 ----------------------------------------------------------------

   3.5  DESIGN AND CONSTRUCTION
        REQUIREMENTS                      X
     3.5.1  General                       X
       3.5.1.1 Equipment Produced by
               CR A/S                     X
       3.5.1.1 a                               X
       3.5.1.1 b                          X
       3.5.1.1 b 1                        X
       3.5.1.1 b 2                        X
       3.5.1.1 b 3                        X
       3.5.1.1 c                          X
       3.5.1.1 d                          X
       3.5.1.1 e                          X
       3.5.1.2 Equipment Produced by
               Subcontractors             X
       3.5.1.2 a                               X
       3.5.1.2 b                               X
       3.5.1.3 Products From Other
               Suppliers                  X
       3.5.1.3 a                          X
       3.5.1.3 b                               X
       3.5.1.3 b.1                             X

       3.5.1.3 b.2                             X
       3.5.1.3 b.3                             X
       3.5.1.3 b.4                             X

     3.5.2  Special Requirements for
             the CAMPS System             X
     3.5.2 a                              X
     3.5.2 b                              X
       3.5.2.1  Environmental Testing     X
       3.5.2.3  Materials                      X
       3.5.2.4  Interchangeability        X







                  TABLE 3.6.2-1




 REQUIREMENT                               VERIFICATION
                                          METHOD

                                          N/A  EXAM.
                                                      ANAL.
                                                             TEST
 ----------------------------------------------------------------

       3.5.2.4 a                          X
       3.5.2.4 b                          X
       3.5.2.4 c                                             X
       3.5.2.4 d                                             X
       3.5.2.4 e                                             X
       3.5.2.5  Bench Handling                               X
       3.5.2.6  Cover Plates                   X
       3.5.2.7  Cabling and Fittings      X
       3.5.2.7 a                               X
       3.5.2.7 b                               X
       3.5.2.7 c                               X
       3.5.2.7 d                               X
       3.5.2.8  Flux and Soldering        X
       3.5.2.8.1  Flux                    X
         3.5.2.8.2  Soldering             X

       3.5.2.9  Ventilation and Cooling   X
       3.5.2.9 a                               X
       3.5.2.9 b                               X
       3.5.2.9 c                               X
       3.5.2.11  Test and Repair          X
         3.5.2.11.1  Accessibility        X
         3.5.2.11.1 a                          X
         3.5.2.11.1 b                          X
         3.5.2.11.1 c                          X

         3.5.2.11.2  Testpoints           X
         3.5.2.11.2 a                          X
         3.5.2.11.2 b                          X

       3.5.2.12  Consumable Parts         X
       3.5.2.13  Safety                   X
         3.5.2.13.2  Personnel Safety     X
         3.5.2.13.2 a                          X
         3.5.2.13.2 b                          X
         3.5.2.13.2 c                          X
         3.5.2.13.2 d                          X




                  TABLE 3.6.2-2



 REQUIREMENT                               VERIFICATION
                                          METHOD

                                          N/A  EXAM.
                                                      ANAL.
                                                             TEST
 ----------------------------------------------------------------

         3.5.2.13.2 d.1                        X
         3.5.2.13.2 d.2                        X
         3.5.2.13.2 d.3                        X
         3.5.2.13.3  Equipment Safety     X
         3.5.2.13.3 a                          X
         3.5.2.13.3 b                          X
         3.5.2.13.3 c                          X
         3.5.2.13.4  Grounding            X
         3.5.2.13.4 a                          X             X
         3.5.2.13.4.a.1                        X
         3.5.2.13.4.a.2                        X             X
         3.5.2.13.4.a.3                        X             X
         3.5.2.13.4 b                                        X
         3.5.2.13.4 c                          X
         3.5.2.13.4 d                          X

       3.5.2.14  Nameplates and Product
                 Marking                       X
       3.5.2.15  Controls                      X
       3.5.2.16  Acoustic Noise                X





















                  TABLE 3.6.2-3


3.6.3    R̲e̲f̲e̲r̲e̲n̲c̲e̲d̲ ̲D̲o̲c̲u̲m̲e̲n̲t̲s̲

          1. Design Review Report for Processor Crate

          2. Design Review Report for Channel Crate

          3. Design Review Report for Watchdog Crate

          4. Design Review Report for CTX Crate

          5. Design Review Report for D-Fan Assy.

          6. Design Review Report for S-Fan Assy.

          7. Design Review Report for Mains Switch

          8. Design Review Report for X-Net Terminal Outlet

          9. Design Review Report for Floppy Disk          
                

         10. Design Review Report for Power Supply CR80S   
                

         11. Design Review Report for Power Supply CR80D   
                 

         12. Design Review Report for MAP I/O DMA          
                

         13. Design Review Report for RAM                  
                 

         14. Design Review Report for CPU-CACHE            
                

         15. Design Review Report for STI                  
                 

         16. Design Review Report for TIA                  
                

         17. Design Review Report for MIA                  
                 

         18. Design Review Report for CCA                  
                

         19. Design Review Report for MBT                  
                 

         20. Design Review Report for Disk Controller      
                

         21. Design Review Report for Floppy Disk Ctrl.    
                 

         22. Design Review Report for CUCP                 
                

         23. Design Review Report for LTU                  
                 



         24. Design Review Report for LIA-N                
                

         25. Design Review Report for SFA                  
                

         26. Design Review Report for DCA                  
                 

         27. Design Review Report for CIA-A/B              
                

         28. Design Review Report for WCA                  
                 

         29. Design Review Report for TDX Controller       
                

         30. Design Review Report for BSM-X/BSM-X Panel    
                 

         31. Design Review Report for LTUX-S               
                

         32. Design Review Report for Back Panel Type 8    
                 

         33. Design Review Report for CCBA Panel           
                 

         34. Design Review Report for Power Switch Panel for
             
             Frequency Stabilizer

         35. Inspection and Test Procedure for Versitron Fiber
             Optic Modems CPS/TPR/015

         36. Inspection and Test Procedures for ARC V24/V28
             (L/L)
             Adapters.

         37. Inspection and Test Procedure for ARC Filter Box.

         38. Inspection and Test Procedure for Captor Power
             Line
             Filter.

         39. Inspection and Test Procedure for CDC 80Mb SMD.
             9762 CPS/TPR/013.

         40. Inspection and Test Procedure for CDC 80Mb MMD.

         41. Inspection and Test Procedure for Abacus Frequency
             Stabilizer.



         42. Inspection and Test Procedure for Delta Data Terminal
             7260TC CPS/TPR/012

         43. Inspection Test Procedure for Tracor Medium Speed
             Printer.

         44  Inspection and Test Procedure for TBD Paper Tape
             Punch.

         45. Inspection and Test Procedure for TBD Paper Tape
             Reader.

         46. Inspection and Test Procedure for Electronic Enclosure
             Rack.

         47. NGTS 40 Environmental Test Methods Amended as applicable
             for CR80 hardware.

         48. CAMPS Hardware Assembly Breakdown CPS/SDS/017.

         49. General Manufacturing Requirements ED/STD/0002.

         50. Design and Construction Criteria for Electronic
             Material ED/STD/0003.

         51. Quality Requirements for Equipment Purchased for
             the CAMPS Project CPS/AUX/009.

         52. Test Report, Acoustic Noise.



3.6.4    T̲e̲s̲t̲ ̲P̲r̲o̲c̲e̲d̲u̲r̲e̲s̲



3.6.4.1  T̲e̲s̲t̲ ̲S̲e̲t̲u̲p̲

         According to paragraph 3.6.2 table 3.6.2-1 through
         3.6.2-3, the verification methods to be applied in
         this test group is examination and test/demonstration.

         The documents listed in paragraph 3.6.3 shall be provided
         for the verification.

         The hardware under test must be fully integrated and
         operable.




3.6.4.2  T̲e̲s̲t̲ ̲I̲n̲i̲t̲i̲a̲l̲i̲z̲a̲t̲i̲o̲n̲

         Activities associated with initialization of the individual
         tests/demonstrations are described by teststeps under
         the affected testprocedure.



3.6.4.3  T̲e̲s̲t̲ ̲S̲t̲e̲p̲s̲

         The test steps for testgroup no. 6 are given in the
         following, consisting of overview descriptions followed
         by detailed test steps. The test numbers reference
         to paragraph 3.6.1.




T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲6̲/̲a̲)̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲R̲ ̲P̲r̲o̲d̲u̲c̲e̲d̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲                                   
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                CR Produced Equipment         3.5.1.1.a



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲a̲/̲0̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲R̲ ̲P̲r̲o̲d̲u̲c̲e̲d̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲,̲ ̲S̲t̲a̲n̲d̲a̲r̲d̲ ̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲1̲.̲1̲ ̲a̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.01                 Examine if the Design
                     Review Reports
                     certifying conformance
                     with the CR
                     standards are available
                     for the following
                     equipment:

                     Processor Crate           Available
1.02                 Channel Crate             Available
1.03                 Watchdog Crate            Available
1.04                 CTX Crate                 Available
1.05                 D-Fan Assy.               Available
1.06                 S-Fan Assy.               Available
1.07                 Mains Switch              Available
1.08                 X-Net Terminal Outlet     Available
1.09                 Floppy Disk               Available
1.10                 Power Supply CR 80S       Available
1.11                 Power Supply CR 80D       Available
1.12                 MAP I/O DMA               Available
1.13                 RAM                       Available
1.14                 CPU-CACHE                 Available
1.15                 STI                       Available
1.16                 TIA                       Available
1.17                 MIA                       Available
1.18                 CCA                       Available
1.19                 MBT                       Available
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲a̲/̲0̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲R̲ ̲P̲r̲o̲d̲u̲c̲e̲d̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲,̲ ̲S̲t̲a̲n̲d̲a̲r̲d̲ ̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲1̲.̲1̲ ̲a̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.20                 Disk Controller           Available
1.21                 Floppy Disk Controller    Available
1.22                 CUCP                      Available
1.23                 LTU                       Available
1.24                 LIA-N                     Available
1.25                 SFA                       Available
1.26                 DCA                       Available
1.27                 CIA-A/B                   Available
1.28                 WCA                       Available
1.29                 TDX Controller            Available
1.30                 BSM-X                     Available
1.31                 LTUX-S                    Available
1.32                 Back Panel Type 8         Available
1.33                 BSM-X Panel               Available
1.34                 CCBA Panel                Available
1.35                 CCB Panel                 Available
1.36                 Power Switch Panel for
                     Freq. Stabl.              Available










 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲6̲/̲b̲)̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲u̲b̲c̲o̲n̲t̲r̲a̲c̲t̲o̲r̲ ̲P̲r̲o̲d̲u̲c̲e̲d̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲                        
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                Subcontractor Produced
                 Equipment                     3.5.1.2 a and b



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲b̲/̲0̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲u̲b̲c̲o̲n̲t̲r̲a̲c̲t̲o̲r̲ ̲P̲r̲o̲d̲u̲c̲e̲d̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲,̲ ̲S̲t̲a̲n̲d̲a̲r̲d̲ ̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲1̲.̲2̲ ̲a̲ ̲a̲n̲d̲ ̲b̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.1                  Examine if "Inspection
                     and Test
                     Procedures" are available
                     for the following
                     equipment:


                     Versitron Fiber Optic
                     Modems                    Available

1.2                  ARC V24/V28 (L/L)
                     Adapters                  Available

1.3                  ARC Filter Box            Available

1.4                  Captor Power Line Filters Available

1.5                  Select at random:
                     3 pc. Fiber Optic Modems
                     3 pc. V24/V28 (L/L)
                     Adapters
                     1 pc. Filter Box
                     1 pc. Power Line Filter   N/A




 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲b̲/̲0̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲u̲b̲c̲o̲n̲t̲r̲a̲c̲t̲o̲r̲ ̲P̲r̲o̲d̲u̲c̲e̲d̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲,̲ ̲S̲t̲a̲n̲d̲a̲r̲d̲ ̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲1̲.̲2̲ ̲a̲ ̲a̲n̲d̲ ̲b̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

1.6                  Examine if the selected
                     modules and
                     sub-assemblies are
                     equipped with an
                     acceptance tag certifying
                     they have
                     passed the inspection and
                     test procedure.           Accepted tags
                                               on the selec-
                                               ted equipment

















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲6̲/̲c̲)̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲r̲o̲d̲u̲c̲t̲s̲ ̲f̲r̲o̲m̲ ̲O̲t̲h̲e̲r̲ ̲S̲u̲p̲p̲l̲i̲e̲r̲s̲                           
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

1                Products from other 
                 Suppliers                     3.5.1.3 b



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲c̲/̲0̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲r̲o̲d̲u̲c̲t̲s̲ ̲f̲r̲o̲m̲ ̲o̲t̲h̲e̲r̲ ̲s̲u̲p̲p̲l̲i̲e̲r̲s̲,̲ ̲Q̲u̲a̲l̲i̲t̲y̲ ̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲1̲.̲3̲ ̲b̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.01     Examine if "Inspection and Test
         Procedures" are available for the
         following equipment:
         CDC Disk Drive SMD                    Available
1.02     CDC Disk Drive MMD                    Available
1.03     Abacus Frequency Stabilizer           Available
1.04     Delta Data Terminal                   Available
1.05     Tracor Medium Speed Printer           Available
1.06     TBD Paper Tape Punch                  Available
1.07     TBD Paper Tape Reader                 Available
1.08     Electronic Enclosure Rack             Available
1.09     Select at random
         1 pc. Disk Drive
         1 pc. Frequency Stabilizer
         5 pc. Terminals
         3 pc. Medium Speed Printers
         1 pc. Paper Tape Punch
         1 pc. Paper Tape Reader
         2 pc. Racks                           N/A
1.10     Examine if the selected modules and
         subassemblies are equipped with an
         acceptance tag certifying they have
         passed the inspection and test proce-
         dure                                  Accepted tags
                                               
                                               on the selec-
                                               ted equipment


 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲6̲/̲d̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲R̲E̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲ ̲f̲o̲r̲ ̲t̲h̲e̲ ̲C̲A̲M̲P̲S̲ ̲S̲y̲s̲t̲e̲m̲ ̲              
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

 1               Materials                     3.5.2.3 
 2               Interchangeability            3.5.2.4 c, d and e
 3               Bench Handling                3.5.2.5
 4               Cover Plates                  3.5.2.6
 5               Cabling and Fittings, 
                 Shield Continuity             3.5.2.7 a
 6               Cabling and Fittings,
                 Wiring identification         3.5.2.7 b
 7               Cabling and Fittings, 
                 Bus Cars                      3.5.2.7 c
 8               Cabling and Fittings, CR
                 Part Numbers                  3.5.2.7 d
 9               Flux and Soldering, Flux      3.5.2.8.1
10               Flux and Soldering, Soldering 3.5.2.8.2
11               Ventilation and Cooling,
                 Intake & Exhaust              3.5.2.9 a
12               Ventilation and Cooling,
                 Resonance                     3.5.2.9 b
13               Ventilation and Cooling,
                 Air Filters                   3.5.2.9 c
14               Accessibility, Parts Inside
                 Containers                    3.5.2.11.1 a
15               Accessibility, Withdrawal 
                 Slides                        3.5.2.11.1 b
16               Accessibility, Plug-in
                 board extractors              3.5.2.11.1 c
17               Testpoints, Banana Plug       3.5.2.11.2 a
18               Testpoints, Measuring/
                 Injection                     3.5.2.11.2 b
19               Personnel Safety, Interlocks  3.5.2.13.2 a
20               Personnel Safety, Excess of
                 30 Volts                      3.5.2.13.2 b
21               Personnel Safety, Marking     3.5.2.13.2 c
22               Personnel Safety, Warning 
                 Principles                    3.5.2.13.2 d
23               Equipment Safety, Circuit
                 Breakers                      3.5.2.13.3 a



T̲E̲S̲T̲ ̲O̲V̲E̲R̲V̲I̲E̲W̲                                  T̲E̲S̲T̲ ̲N̲O̲.̲:̲ ̲6̲/̲d̲

F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲R̲E̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲ ̲f̲o̲r̲ ̲t̲h̲e̲ ̲C̲A̲M̲P̲S̲ ̲S̲y̲s̲t̲e̲m̲ ̲              
    

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

Test Case/
Reference        Action                        SRS Reference
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲

24               Equipment Safety, Protection
                 of Equipment                  3.5.2.13.3 b
25               Equipment Safety, Fuse
                 location and indication       3.5.2.13.3 c
26               Grounding, Three Ground
                 Circuits                      3.5.2.13.4 a
27               Grounding, AC Power Neutral   3.5.2.13.4 b
28               Grounding, Panels, Drawers
                 and Sub-assys                 3.5.2.13.4 c
29               Grounding, Signalling and
                 Control Ground                3.5.2.13.4 d
30               Nameplates and Product
                 Marking                       3.5.2.14
31               Controls                      3.5.2.15
32               Acoustic Noise                3.5.2.16



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲R̲e̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲,̲ ̲M̲a̲t̲e̲r̲i̲a̲l̲s̲        

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲3̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1.1      Select at random the following
         modules and units:
         5 pc. Printed Circuit Boards
         2 pc. Power Supplies
         1 pc. Disk Drive
         1 pc. Delta Data Terminal
         1 pc. Medium Speed Printer
         1 pc. Frequency Stabilizer
         1 pc. Paper Tape Punch
         1 pc. Paper Tape Reader               N/A
1.2      Examine if the selected modules and
         units include hard curing compounds 
         to hold replaceable parts. (Parts
         soldered to terminals, printed wiring
         boards ets. are not considered replace-
         able in this context)                 They do not
                                               hold hard 
                                               curing com-
                                               pounds.









 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲2̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲I̲n̲t̲e̲r̲c̲h̲a̲n̲g̲e̲a̲b̲i̲l̲i̲t̲y̲                     

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲4̲.̲ ̲c̲,̲ ̲d̲ ̲a̲n̲d̲ ̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

2.01     In the following the concept swop-
         ping is composed of four actions:
         1) Switch of the system
         2) Swop the selected items
         3) Switch on the system
         4) Run the M & D program determined
         for test of the selected items in
         such a way that all swopped items
         will be exercised.                    N/A
2.02     Select at random 2
         CR 80S Power Supply and swop these.   No functional
                                               deterioration
2.03     Select at random 2
         CR 80D Power Supply and swop these.   No functional
                                               deterioration
2.04     Swop the MAP modules                  No functional
                                               deterioration
2.05     Select at random 2 RAM
         modules and swop these                No functional
                                               deterioration
2.06     Select at random 2 CPU-CACHE mo-
         dules and swop these.                 No functional
                                               deterioration
2.07     Swop the STI modules                  No functional
                                               deterioration
2.08     Select at random 2 TIA modules
         and swop these.                       No functional
                                               deterioration
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲2̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲I̲n̲t̲e̲r̲c̲h̲a̲n̲g̲e̲a̲b̲i̲l̲i̲t̲y̲                     

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲4̲.̲ ̲c̲,̲ ̲d̲ ̲a̲n̲d̲ ̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

2.09     Swop the MIA modules                  No functional
                                               deterioration
2.10     Select at random 2 CCA modules
         and swop these.                       No functional
                                               deterioration
2.11     Select at random 2 Disk controllers
         and swop these.                       No functional
                                               deterioration
2.12     Swop the Floppy Disk Cont. with
         a spare                               No functional
                                               deterioration
2.13     Select at random 2 LTU modules
         and swop these                        No functional
                                               deterioration
2.14     Select at random 2 DCA modules
         and swop these                        No functional
                                               deterioration
2.15     Swop a CIA module with a spare        No functional
                                               deterioration
2.16     Swop the WCA module with a spare      No functional
                                               deterioration
2.17     Swop the TDX controllers              No functional
                                               deterioration
2.18     Select at random 2 BSM-X modules
         and swop these                        No functional
                                               deterioration

 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲2̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲I̲n̲t̲e̲r̲c̲h̲a̲n̲g̲e̲a̲b̲i̲l̲i̲t̲y̲                     

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲4̲.̲ ̲c̲,̲ ̲d̲ ̲a̲n̲d̲ ̲e̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

2.19     Select at random 2 LTUX-S modules
         and swop these                        No functional
                                               deterioration
2.20     Select at random 2 Opto T/R modules
         and swop these                        No functional
                                               deterioration
2.21     Select at random 2 V24/V28 (L/L)
         1 channel Adapters and swop these     No functional
                                               deterioration
2.22     Select at random 2 V24/V28 (L/L)
         4 channel Adapters and swop these     No functional
                                               deterioration















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲3̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲B̲e̲n̲c̲h̲ ̲H̲a̲n̲d̲l̲i̲n̲g̲                         

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲5̲                                    
            

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

3.1      Select at random the following
         number of modules and units:
         2 pc. CR 80S PCBA's
         2 pc. CR 80D PCBA's
         1 pc. CR 80S Power Supply
         1 pc. CR 80D Power Supply
         1 pc. Mains Switch
         1 pc. CR 80S Fan Assy.
         1 pc. CR 80D Fan Assy.                                       1
                                                                      pc.
                                                                      PCBA
                                                                      from
                                                                      the
                                                                      VDU
                                                                      
                                                                      
         1 pc. PCBA from the MSP
         1 pc. CUCP
         1 pc. Floppy Disk
         1 pc. PCBA from the SMD
         1 pc. PCBA from the MMD
         1 pc. Adapter Power Supply            N/A
3.2      Operate the selected test items e.g.
         by using the M & D program relevant
         for each single item, and note the 
         results                               N/A
3.3      Perform the Bench Handling test on
         each one of the selected test items,
         as specified in NGTS 40 method 516 
         procedure V (see appendix B) with 
         the limit in step 1 (a) modified from
         45 degrees to 30 degrees              N/A
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲3̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲B̲e̲n̲c̲h̲ ̲H̲a̲n̲d̲l̲i̲n̲g̲                         

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲5̲                                    
            

Case     
Step No.             Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

3.4      Examine the test items as specified
         in NGTS 40 paragraph 3.2.4            No visible
                                               damage
3.5      Operate the test items as in test
         step 3.2 and compare the results      No functional
                                               deterioration





















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲4̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲o̲v̲e̲r̲ ̲P̲l̲a̲t̲e̲s̲                           

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲6̲                                    
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
4.1                  Examine if cover plates
                     are firmly
                     fixed in a way that are
                     consistent
                     with normal mechanical
                     strength requirements.    They are

4.2                  Examine if fasteners for
                     cover plates fitted on
                     modules are of the
                     "captive" type            They are

















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲5̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲a̲b̲l̲i̲n̲g̲ ̲a̲n̲d̲ ̲F̲i̲t̲t̲i̲n̲g̲s̲,̲ ̲S̲h̲i̲e̲l̲d̲ ̲C̲o̲n̲t̲i̲n̲u̲i̲t̲y̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲7̲ ̲a̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
5.1                  Examine if the cables
                     between
                     rack C and D is run in
                     a steel
                     conduit ensuring correct
                     grounding.                They are

5.2                  Examine if the shield in
                     cables
                     connecting low speed
                     devices with
                     the filter box are
                     connected to pin 
                     1 of the plug in one
                     end of the cable only     It is













 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲6̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲a̲b̲l̲i̲n̲g̲ ̲a̲n̲d̲ ̲F̲i̲t̲t̲i̲n̲g̲s̲,̲ ̲W̲i̲r̲i̲n̲g̲ ̲I̲d̲e̲n̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲7̲ ̲b̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
6.1                  Examine if all wires
                     which connect
                      units mounted in the
                     racks are 
                     marked in both ends
                     with a W-number, unique
                     to the individual wire    They are

6.2                  Examine if the colour
                     coding of
                     chassis wiring are
                     Yellow/Green              It is
















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲7̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲a̲b̲l̲i̲n̲g̲ ̲a̲n̲d̲ ̲F̲i̲t̲t̲i̲n̲g̲s̲,̲ ̲B̲u̲s̲ ̲B̲a̲r̲s̲             

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲7̲ ̲c̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
7.1                  Examine if bus bars are
                     used for
                     interconnection between
                     assemblies
                     and subassemblies         They are not
                                                used






















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲8̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲a̲b̲l̲i̲n̲g̲ ̲a̲n̲d̲ ̲F̲i̲t̲t̲i̲n̲g̲s̲,̲ ̲C̲R̲ ̲P̲a̲r̲t̲ ̲N̲u̲m̲b̲e̲r̲s̲      

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲7̲ ̲d̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
8.1                  Select at random 10
                     pc. cables
                     and wires or similar
                     connectors                N/A

8.2                  Examine if the 10
                     selected items
                     are marked with CR part
                     numbers                   They are

8.3                  Examine if the part
                     numbers corresponds with
                     the numbers indi-
                     cated in "CAMPS Hardware
                     Assembly
                     Breakdown" CPS/SDS/017    They correspond












 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲0̲9̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲l̲u̲x̲ ̲a̲n̲d̲ ̲s̲o̲l̲d̲e̲r̲i̲n̲g̲,̲ ̲F̲l̲u̲x̲                   

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲8̲.̲1̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
9.1                  This requirement is
                     stated in CR
                     standards "General
                     Manufacturing
                     Requirements"
                     ED/STD/0002 and in
                     "Quality Requirements
                     for Equipment Purchased
                     for the CAMPS Pro-
                     ject" CPS/AUX/009, and
                     is consequently already
                     verified in test
                     procedures: 6/a/1, 6/b/1
                     and 6/c/1.                N/A














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲0̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲F̲l̲u̲x̲ ̲a̲n̲d̲ ̲s̲o̲l̲d̲e̲r̲i̲n̲g̲,̲ ̲S̲o̲l̲d̲e̲r̲i̲n̲g̲              

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲8̲.̲2̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
10.1                 This requirement is
                     stated in CR
                     standards "General
                     Manufacturing
                     Requirements"
                     ED/STD/0002 and in
                     "Quality Requirements
                     for Equipment Purchased
                     for the CAMPS Pro-
                     ject" CPS/AUX/009, and
                     is consequently already
                     verified in test
                     procedures: 6/a/1, 6/b/1
                     and 6/c/1                 N/A














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲1̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲n̲t̲i̲l̲a̲t̲i̲o̲n̲ ̲a̲n̲d̲ ̲C̲o̲o̲l̲i̲n̲g̲,̲ ̲I̲n̲t̲a̲k̲e̲ ̲a̲n̲d̲ ̲E̲x̲h̲a̲u̲s̲t̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲9̲ ̲a̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
11.1                 Examine if cabinets have
                     filtered cooling air
                     intake                    They have

11.2                 Examine if cooling air
                     is exhausted
                     to the atmosphere at the
                     top of the 
                     cabinets                  It is



















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲2̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲n̲t̲i̲l̲a̲t̲i̲o̲n̲ ̲a̲n̲d̲ ̲C̲o̲o̲l̲i̲n̲g̲,̲ ̲R̲e̲s̲o̲n̲a̲n̲c̲e̲         

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲9̲ ̲b̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
12.1                 Examine if ventilation
                     and cooling
                     cause any resonance
                     effects and
                     vibrations                There are no
                                               resonance or
                                               vibration of
                                               any signifi-
                                               cance



















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲3̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲V̲e̲n̲t̲i̲l̲a̲t̲i̲o̲n̲ ̲a̲n̲d̲ ̲C̲o̲o̲l̲i̲n̲g̲,̲ ̲A̲i̲r̲ ̲F̲i̲l̲t̲e̲r̲s̲       

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲9̲ ̲c̲                                  
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
13.1                 Examine if the distributed
                     cooling
                     systems in the CR produced
                     equipment
                     are supplied with air
                     filters                   They are

13.2                 Measure the thickness of
                     filters in
                     the CR 80S Fan Assy.       5 mm.

13.3                 Measure the thickness of
                     filters in
                     the CR 80D Fan Assy       20 mm.














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲4̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲A̲c̲c̲e̲s̲s̲i̲b̲i̲l̲i̲t̲y̲,̲ ̲P̲a̲r̲t̲s̲ ̲I̲n̲s̲i̲d̲e̲ ̲C̲o̲n̲t̲a̲i̲n̲e̲r̲s̲     

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲1̲.̲1̲ ̲a̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
14.1                 Examine if connections
                     to parts
                     inside removable
                     containers run
                     through the container
                     by threading              This is the case
                                               
                                               only for the
                                               
                                               CR 80S Fan Assy
                                               which has a very
                                               low failure rate


















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲5̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲A̲c̲c̲e̲s̲s̲i̲b̲i̲l̲i̲t̲y̲,̲ ̲W̲i̲t̲h̲d̲r̲a̲w̲a̲l̲ ̲S̲l̲i̲d̲e̲s̲           

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲1̲.̲1̲ ̲b̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
15.1                 Examine if chassis and
                     assemblies
                     contained within
                     cabinets or
                     consoles which require
                     removal or
                     replacement during normal
                     maintenance and repair are
                     mounted on
                     withdrawable slides       SMD and MMD
                                               disk drives
                                               are mounted
                                               on withdraw-
                                               able slides














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲6̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲A̲c̲c̲e̲s̲s̲i̲b̲i̲l̲i̲t̲y̲,̲ ̲P̲l̲u̲g̲-̲i̲n̲ ̲B̲o̲a̲r̲d̲ ̲E̲x̲t̲r̲a̲c̲t̲o̲r̲s̲    

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲1̲.̲1̲ ̲c̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
16.1                 Examine if plug-in boards
                     are provided with build-in
                     ejectors/extractors       They are

























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲7̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲T̲e̲s̲t̲p̲o̲i̲n̲t̲s̲,̲ ̲B̲a̲n̲a̲n̲a̲ ̲P̲l̲u̲g̲s̲               

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲1̲.̲2̲ ̲a̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
17.1                 Examine if testjacks are
                     of the banana plug type   They are not


























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲8̲


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲T̲e̲s̲t̲p̲o̲i̲n̲t̲s̲,̲ ̲M̲e̲a̲s̲u̲r̲i̲n̲g̲/̲I̲n̲j̲e̲c̲t̲i̲o̲n̲        

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲1̲.̲2̲ ̲b̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
18.1                 Examine if test points/
                     tracing points are pro-
                     vided only to the extend
                     they form part of the 
                     maintenance/repair
                     concept                   They are






















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲1̲9̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲e̲r̲s̲o̲n̲n̲e̲l̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲I̲n̲t̲e̲r̲l̲o̲c̲k̲s̲           

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲2̲ ̲a̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
19.1                 Examine if it is possib-
                     le for unauthorised per-
                     sonnel to open major   
                     assemblies carrying high
                     tension voltages          This is not
                                               possible
                                               without the
                                               use of tools




















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲0̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲e̲r̲s̲o̲n̲n̲e̲l̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲E̲x̲c̲e̲s̲s̲ ̲o̲f̲ ̲3̲0̲ ̲V̲o̲l̲t̲s̲ ̲  

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲2̲ ̲b̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
20.1                 Examine if personnel,
                     with the equipment as-
                     sembled and set up for
                     operation, are pro-
                     tected from contact
                     with potentials in
                     excess of 30 volts to
                     ground, chassis or        
                     frame, including poten-
                     tials on charged capa-
                     citors                    They are

















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲1̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲e̲r̲s̲o̲n̲n̲e̲l̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲M̲a̲r̲k̲i̲n̲g̲              

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲2̲ ̲c̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
21.1                 Examine if relevant no-
                     tice and markings on the
                     equipment are provided to
                     points where dangerous
                     voltages are encountered  They are
                                               provided






















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲2̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲P̲e̲r̲s̲o̲n̲n̲e̲l̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲W̲a̲r̲n̲i̲n̲g̲ ̲P̲r̲i̲n̲c̲i̲p̲l̲e̲s̲   

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲2̲ ̲d̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲

2.1                  Examine if a suitable
                     warning is provided where
                     a voltage of 50 or more
                     volts are exposed during
                     the maintenance activit-                          ies It
                                                                           is
22.2                 Examine if the warning is
                     according to the follow-
                     ing principles:
                     1) "DANGER (xxx) VOLTS
                     WHEN COVER REMOVED" (in
                     aluminium or white let-
                     tering 1.5 cm high on a
                     read background) where
                     (xxx) is the nominal vol-
                     tage.
                     2) "DANGER HIGH VOLTAGE
                     (xxx) VOLTS" where (xxx)
                     is the nominal voltage.
                     3) "CAUTION (xxx) VOLTS.
                     DISCONNECT POWER BEFORE
                     REMOVAL OF COVER" where
                     (xxx) is the nominal vol-
                     tage                      It is



 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲3̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲C̲i̲r̲c̲u̲i̲t̲ ̲B̲r̲e̲a̲k̲e̲r̲s̲     

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲3̲ ̲a̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
23.1                 Examine if circuit break-
                     ers or switches which 
                     operate to make or break 
                     AC power lines will make 
                     or break all conductors at
                     the same time.            They will
23.2                 Examine if the neutral
                     wire pass through any 
                     fuse in three-phase cir-
                     cuits                     It does not


















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲4̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲P̲r̲o̲t̲e̲c̲t̲i̲o̲n̲ ̲o̲f̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲     

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲3̲ ̲b̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
24.1                 Examine if fuses and
                     circuit breakers are
                     provided within the e-
                     quipment to protect it
                     from damage due to over-                          load They
                                                                            are
                                               provided
24.2                 Examine if each major as-
                     sembly is individually 
                     protected so that a 
                     fault in one major as-
                     sembly cannot damage any
                     other major assembly      They are 
                                               individually
                                               protected














 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲5̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲E̲q̲u̲i̲p̲m̲e̲n̲t̲ ̲S̲a̲f̲e̲t̲y̲,̲ ̲F̲u̲s̲e̲ ̲L̲o̲c̲a̲t̲i̲o̲n̲ ̲a̲n̲d̲ ̲I̲n̲d̲i̲c̲a̲t̲i̲o̲n̲  
   

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲3̲ ̲c̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
25.1                 Examine if all fuses and
                     circuit breakers are lo-
                     cated such that they are
                     readily accessible        They are
25.2                 Examine if all fuses in-
                     corporate a visual sy-
                     stem of failure indica-
                     tion                      They do




















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲6̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲G̲r̲o̲u̲n̲d̲i̲n̲g̲,̲ ̲T̲h̲r̲e̲e̲ ̲G̲r̲o̲u̲n̲d̲ ̲C̲i̲r̲c̲u̲i̲t̲s̲                
   

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲4̲ ̲a̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
26.1                 Examine if the grounding
                     system will provide an
                     effective protection for
                     personnel and material a-
                     gainst insulation defects It will
26.2                 Examine if it is arranged 
                     so that there are three 
                     separate and isolated 
                     ground circuits, namely:
                     1) AC power neutral
                     2) Equipment frame ground
                     3) Signalling and control
                     ground                    It is arranged
                                               so
26.3                 Measure with an ohm-meter
                     it the "Equipment frame
                     ground" is isolated from
                     the "Signalling and con-
                     trol ground"              They are iso-
                                               lated from
                                               each other







 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲7̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲G̲r̲o̲u̲n̲d̲i̲n̲g̲,̲ ̲A̲C̲ ̲P̲o̲w̲e̲r̲ ̲N̲e̲u̲t̲r̲a̲l̲                     
   

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲4̲ ̲b̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
27.1                 Disconnect the equipment
                     from the mains            N/A
27.2                 Measure with an ohm-meter
                     if the "AC power neutral"
                     is isolated from the "e-
                     quipment frame ground"    They are iso-
                                               lated from 
                                               each other
27.3                 Connect the equipment to
                     the mains again           N/A


















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲8̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲G̲r̲o̲u̲n̲d̲i̲n̲g̲,̲ ̲P̲a̲n̲e̲l̲s̲,̲ ̲D̲r̲a̲w̲e̲r̲s̲ ̲a̲n̲d̲ ̲S̲u̲b̲-̲a̲s̲s̲y̲'̲s̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲4̲ ̲c̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
28.1                 Examine if all panels,
                     drawers and other sub-
                     assemblies, whether fixed
                     or removeable are fastened
                     or connected to the associ-
                     ated frame, in a manner 
                     that ensures they are se-
                     curely grounded           They are se-
                                               curely groun-
                                               ded


















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲2̲9̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲G̲r̲o̲u̲n̲d̲i̲n̲g̲,̲ ̲S̲i̲g̲n̲a̲l̲l̲i̲n̲g̲ ̲a̲n̲d̲ ̲C̲o̲n̲t̲r̲o̲l̲ ̲G̲r̲o̲u̲n̲d̲

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲3̲.̲4̲ ̲d̲                               
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
29.1                 Examine if the signalling
                     and control ground is 
                     routed via interconnecting
                     wires and cables          It is
























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲3̲0̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲N̲a̲m̲e̲p̲l̲a̲t̲e̲s̲ ̲a̲n̲d̲ ̲P̲r̲o̲d̲u̲c̲t̲ ̲M̲a̲r̲k̲i̲n̲g̲          

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲4̲                                   
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
30.1                 Examine if each major as-
                     sembly has a nameplate
                     attached in a prominent
                     position                  They have
30.2                 Examine if these name-
                     plates indicate:
                     - Serial number
                     - SHAPE contract number
                     - Date of manufacture
                     - Principal characteri-
                       stics
                     - Manufacturers name and
                       address                 They do















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲3̲1̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲C̲o̲n̲t̲r̲o̲l̲s̲                                

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲5̲                                   
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
31.1                 Examine if the type and
                     layout of controls are
                     such as to avoid an in-
                     terruption of service or
                     change of operational 
                     mode as a result of acci-
                     dental bumping, touching
                     or catching of clothing   It is




















 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR



T̲E̲S̲T̲ ̲S̲T̲E̲P̲S̲                                                           T̲E̲S̲T̲
                                                                     ̲N̲O̲.̲:̲
                                                                     ̲6̲/̲d̲/̲3̲2̲
                                                                     


F̲U̲N̲C̲T̲I̲O̲N̲:̲ ̲ ̲A̲c̲o̲u̲s̲t̲i̲c̲ ̲N̲o̲i̲s̲e̲                               

S̲R̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:̲ ̲ ̲3̲.̲5̲.̲2̲.̲1̲6̲                                   
            

Case     Test
Step No. Station     Action                    Expected Results
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
32.1                 Examine if a test report
                     verifying fullfulment of
                     the stated requirement is
                     available                 It is
























 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
 ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Comments:





                                                ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
                                               ̲ ̲
                                               T̲E̲S̲T̲ ̲W̲I̲T̲N̲E̲S̲S̲E̲S̲

                                               TEST QA   QAR