top - download
⟦b2c93116a⟧ Wang Wps File
Length: 17186 (0x4322)
Types: Wang Wps File
Notes: GECO
Names: »2614A «
Derivation
└─⟦67e26c09b⟧ Bits:30006222 8" Wang WCS floppy, CR 0244A
└─ ⟦this⟧ »2614A «
WangText
…0e……00……00……00……00…4…0a……00……00…4…0b…4…00……86…1 …02… …02… …02…
…02…
SEISMIC DATA PREPROCESSING SYSTEM…02…1982-08-09…02……02…
SECTION III page #
PRICE PROPOSAL…02……02…
SEISMIC DATA PREPROCESSING SYSTEM
SECTION III
PRICE PROPOSAL
DOC.NO. SDPS/PRP/002/CRA Issue 1
SUBMITTED TO: GEOPHYSICAL COMPANY OF NORWAY A.S.
VERITASVEIEN 1, P.O. Box 330
N-1322 H[VIK, NORWAY
IN RESPONSE TO: SPECIFICATION FOR ON-LINE VERSION
OF PREPROCESSING UNIT FOR "NESSIE"
PF/js/0479J 04.06.1982
PREPARED BY: P.E. HOLMDAHL
This proposal contains information proprietary to Christian
Rovsing A/S. The data contained herein, in whole or
in part, may not be duplicated, used or disclosed outside
the recipient as Purchaser for any purpose other than
to evaluate the proposal; provided that if a contract
is awarded to this offerer as a result of, or in connection
with the submission of this data, the Purchaser shall
have the right to duplicate, use, or disclose the data
to the extent provided in the contract. This restriction
does not limit the Purchaser's right to use information
contained in the data if it is obtained from another
source without restriction.
TABLE OF CONTENTS
1 INTRODUCTION ..................................
2 SCOPE OF WORK .................................
2.1 Basic Offer ................................
2.2 Deliverable Items ..........................
2.2.2 SDPS Phase II ..........................
2.2.1 SDPS Phase I ...........................
2.2.2.1 Documentation .....................
2.2.2.2 Hardware ...........................
2.2.2.3 Software ...........................
2.2.3 SDPS Phase III .........................
3 PRICE ..........................................
3.1 Phase I ....................................
3.2.1 Development Effort .....................
3.2.2 Hardware Cost ..........................
3.2.3 Standard Software Cost .................
3.3.1 Development Effort .....................
3.3.2 Hardware Cost ..........................
3.4 Recurring Cost .............................
3.5 Spare Parts ................................
4 MAINTENANCE ..............................
5 TRAINING .......................................
6 TERMS AND CONDITIONS ...........................
6.1 Contract Conditions ........................
6.2 Taxes and Duties ...........................
6.3 Terms of Payment ...........................
6.4 Validity ...................................
6.5 Patent Rights ..............................
6.6 Marketing Agreement ........................
1̲ ̲ ̲I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲
This section contains the price proposal for the Seismic
Data Preprocessing System, described in section I implemented
according to the project implementation plan of section
II of this proposal.
2̲ ̲ ̲S̲C̲O̲P̲E̲ ̲O̲F̲ ̲W̲O̲R̲K̲
The work is divided into three phases.
Phase I: System specification,
Hardware specification and
Software specification
Phase II: Design, development, procurement,
integration and delivery of a subset of
the phase III delivery, capable of recording
in Raw Data mode
Phase III: Design, development, procurement,
integration and delivery of upgrades to
the phase II delivery to provide the full
SDPS processing system.
As working-assumptions for this proposal, we have presumed
the following:
a) The phase II delivery is returned TBD months after
the delivery for upgrading to the full SDPS System.
b) The customer furnishes a simulator which provides
an interface equivalent to the "NESSIE", and sufficient
types of test data for development and, in particular,
for the Acceptance testing.
We want to emphasize that we are prepared to discuss
alternatives to these working assupmtions, or to other
explicit or implicit presumptions.
2.1 B̲a̲s̲i̲c̲ ̲O̲f̲f̲e̲r̲
The basic offer is described by the work packages,
found on figures 2-1, 2-2 and 2-3 on the subsequent
pages.
Figure 2-1
Figure 2-2
Figure 2-3
2.2 D̲e̲l̲i̲v̲e̲r̲a̲b̲l̲e̲ ̲I̲t̲e̲m̲s̲
2.2.1 S̲D̲P̲S̲ ̲P̲h̲a̲s̲e̲ ̲I̲
I̲t̲e̲m̲ ̲N̲o̲.̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 Requirements specification
2 System design specification
3 Hardware specification
4 Software specification
5 Test requirements specification
6 Documentation requirements
spec.
2.2.2 S̲D̲P̲S̲ ̲P̲h̲a̲s̲e̲ ̲I̲I̲
2.2.2.1 D̲o̲c̲u̲m̲e̲n̲t̲a̲t̲i̲o̲n̲
I̲t̲e̲m̲ ̲N̲o̲.̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 System design description
2 SDI design description
3 Tape ctrl design descr.
4 Application SW design descr.
5 Acceptance Test procedure
6 Progress reports, monthly
7 Meeting minutes
2.2.2.2 H̲a̲r̲d̲w̲a̲r̲e̲
See fig. 2-4 overleaf.
I̲t̲e̲m̲ ̲N̲o̲.̲ Q̲t̲y̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 1 Processor Unit with
2 CR8050M Power Supply
1 CR8003M CPU
4 CR8016M RAM, 128K
1 CR8020M MAP
1 CR8071M MIA
1 CR80XXM Seismic Data Interface
(wire wrap version)
1 CR80XXM DACA
2 1 Storage and I/O Unit with
1 CR8055M Power Supply
1 CR8016M RAM, 128K
1 CR80XXM Tape Controller
(wire wrap version)
1 CR80XXM 6250 TA
1 CR8047M FD Controller
1 CR8087M SFA
2 CR80XXM DCI
3 3 6250 BPI Tape drives
4 3 Racks
5 2 Mains filter
6 2 Power Distributer
7 - Cables
Figure 2-4: Record only config
2.2.2.3 S̲o̲f̲t̲w̲a̲r̲e̲
I̲t̲e̲m̲ ̲N̲o̲.̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 DAMOS system components
3 Terminal Operating System
4 DAMOS boot loader
5 System Management
6 SDI Handler
7 SDI M & D software
8 MUX SEG-D
9 6250 BPI Tape Handler
10 6250 BPI Tape M & D
11 Data Channel M & D
12 Factory Test SW
13 Accpetance Test SW
2.2.3 S̲D̲P̲S̲ ̲P̲h̲a̲s̲e̲ ̲I̲I̲I̲
2.2.3.1 D̲o̲c̲u̲m̲e̲n̲t̲a̲t̲i̲o̲n̲
I̲t̲e̲m̲ ̲N̲o̲.̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 FPP design description
2 Appl. SW design descr.
3 Acceptance Test procedure
4 Progress Reports, Monthly
5 Meeting Minutes
2.2.3.2 H̲a̲r̲d̲w̲a̲r̲e̲
I̲t̲e̲m̲ ̲N̲o̲.̲ Q̲t̲y̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 1 CR8050M Power Supply
2 4 Floating Point Processor
3 8 1 MW RAM
2.2.3.3 S̲o̲f̲t̲w̲a̲r̲e̲
I̲t̲e̲m̲ ̲N̲o̲.̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 FPP Handler
2 FPP M & D
3 Spatial Resampling
4 Time Resampling
5 DEMUX SEG-D
6 1 MW RAM test SW
7 Factory Test SW
8 Acceptance Test SW
3 P̲R̲I̲C̲E̲
The hourly and monthly costs for the different categories
of personnel are given in the table to follow. It should
be noted that a man-month is priced at 163 hours. All
prices are in Danish Crowns, exclusive VAT.
C̲a̲t̲e̲g̲o̲r̲y̲ ̲(̲G̲R̲A̲D̲E̲)̲ H̲o̲u̲r̲l̲y̲ ̲C̲o̲s̲t M̲o̲n̲t̲h̲l̲y̲ ̲C̲o̲s̲t̲
Senior Engineer (E1) 457 74,491
Engineer (E2) 348 56,724
Technician (T) 297 48,411
3.1 P̲h̲a̲s̲e̲ ̲I̲
W̲P̲ ̲N̲o̲.̲ E̲f̲f̲o̲r̲t̲ D̲P̲O̲
110 3 E1
120 2 E1
130 2 E1 19,951 (travel)
140 1 E1, 1 E2
150 1 E1, 1 E2
160 1 E1
1̲7̲0̲ 1̲ ̲E̲1̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
100 11 E1, 2 E2 19,951
Phase I, Cost 9̲5̲2̲,̲8̲0̲0̲
3.2 P̲h̲a̲s̲e̲ ̲I̲I̲
The price for phase II comprises:
Phase II development cost 10,273,884
Phase II hardware cost 1,321,666
Phase II Std. software cost ̲ ̲ ̲ ̲9̲3̲,̲6̲0̲0̲
1̲1̲,̲6̲8̲9̲,̲1̲5̲0̲
The price is detailed in the subsections to follow.
3.2.1 D̲e̲v̲e̲l̲o̲p̲m̲e̲n̲t̲ ̲C̲o̲s̲t̲
W̲P̲ ̲N̲o̲.̲ E̲f̲f̲o̲r̲t̲ D̲P̲O̲
210 12 E1
220 15 E1
230 100 E2, 14T 1,100K
240 2 E2
250 6 E2, 2T 50K
260 1 E2, 1T 50K
2̲7̲0̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲1̲ ̲E̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
200 27 E1, 110 E2, 17T 1,200K
Phase II development cost: 1̲0̲,̲2̲7̲3̲,̲8̲8̲4̲
Work Package 230 is detailed as follows:
W̲P̲ ̲N̲o̲.̲ E̲f̲f̲o̲r̲t̲ D̲P̲O̲
231 14 E2
232 3 E2, 4T 100K
233 34 E2, 3T 400K
234 2 E2
235 23 E2, 3T 450K
236 17 E2, 4T 150K
2̲3̲7̲ ̲ ̲7̲ ̲E̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
230 100 E2, 14 T 1,100K
3.2.2 H̲a̲r̲d̲w̲a̲r̲e̲ ̲C̲o̲s̲t̲
The pricing below is based on the delivery of the prototype
of the SDI interface and the 6250 BPI Tape Controller
(wire-wrap version). The manufacturing cost of these
prototypes is covered under the Development Cost.
Q̲t̲y̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲ ̲ C̲o̲s̲t̲
1 Processor Unit 581,320
1 Storage and I/O Unit 174,634
3 6250 BPI Tape drives 450,000
3 Racks 52,899
2 Mains filters 13,364
2 Power distributer 5,278
1 Dual Floppy drive 24,171
Cables ̲ ̲ ̲2̲0̲,̲0̲0̲0̲
1̲,̲3̲2̲1̲,̲6̲6̲6̲
3.2.3 S̲t̲a̲n̲d̲a̲r̲d̲ ̲S̲o̲f̲t̲w̲a̲r̲e̲ ̲C̲o̲s̲t̲
D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲ C̲o̲s̲t̲
DAMOS System components 72.0K
Terminal operating system 18.0K
DAMOS boot loader ̲3̲.̲6̲K̲
9̲3̲.̲6̲K̲
3.3 P̲h̲a̲s̲e̲ ̲I̲I̲I̲
The price for phase III comprises:
Phase III development cost 7,362,626
Phase III hardware cost, net 1̲,̲9̲8̲5̲,̲2̲4̲6̲
9̲,̲3̲4̲7̲,̲8̲7̲2̲
The price is detailed in the sections to follow.
Please note that WP's 380 and 390, documentation and
training are not quoted.
We are prepared to quote these efforts as soon as we
have a more firm knowledge on your requirements to
these activities.
3.3.1 D̲e̲v̲e̲l̲o̲p̲m̲e̲n̲t̲ ̲C̲o̲s̲t̲
W̲P̲ ̲N̲o̲.̲ E̲f̲f̲o̲r̲t̲ D̲P̲O̲
310 7 E1
320 8 E1
330 81 E2, 12T 600K
340 1T
350 6 E2
360 1/2T
3̲7̲0̲ ̲ ̲ ̲ ̲ ̲1̲ ̲E̲2̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
15 E1, 88 E2, 13.5T 600K
Development Cost 7̲,̲3̲6̲2̲,̲6̲2̲6̲
Work package 330 is detailed as follows:
W̲P̲ ̲N̲o̲.̲ E̲f̲f̲o̲r̲t̲ D̲P̲O̲
331 1 E2, 2T
332 49 E2, 8T 400K
333 10 E2
334 8 E2
335 2 E2
336 4 E2, 2T 200K
3̲3̲7̲ ̲7̲ ̲E̲2̲ ̲ ̲ ̲ ̲ ̲
330 81 E2, 12T 600K
3.3.2 H̲a̲r̲d̲w̲a̲r̲e̲ ̲C̲o̲s̲t̲
The pricing below is based on exchange of all five
128K RAM modules with a total of eight 1 MW RAM modules.
1 CR8050M Power Supply 17,246
4 Floating Point Processors 700,000
8 1 MW RAM 1,568,000
Return of five 128K RAM ̲-̲3̲0̲0̲,̲0̲0̲0̲
1̲,̲9̲8̲5̲,̲2̲4̲6̲
3.4 R̲e̲c̲u̲r̲r̲i̲n̲g̲ ̲C̲o̲s̲t̲
The recurring cost for a complete system delivered,
installed and tested is estimated to
A̲C̲T̲I̲V̲I̲T̲Y̲ E̲f̲f̲o̲r̲t̲ D̲P̲O̲
1. Procurement 1T
2. Hardware cost 3,389,629
3. Integration 2 E2, 2T
4. Delivery 1T
5. Acceptance Test 1̲ ̲E̲2̲,̲ ̲1̲T̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
3 E2, 5T 3.389,629
Total cost, each system 3̲,̲8̲0̲1̲,̲8̲5̲6̲
The hardware cost is detailed in
the subsection below.
3.4.1 H̲a̲r̲d̲w̲a̲r̲e̲ ̲C̲o̲s̲t̲
Q̲t̲y̲ D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
1 Processor crate with C̲o̲s̲t̲
2 CR8050M Power supplies
1 CR8003M CPU
1 CR80XXM 1MW RAM
1 CR8020M MAP
1 CR8071M MIA
1 CR80XXM SDI
4 CR80XXM FPP
1 CR80XXM SDA
1 CR80XXM DACA 1,288,427
1 Storage and I/O crate with
2 CR8050M Power supply
7 CR80XXM 1MW RAM
1 CR80XXM 6250 BPI Tape Controller
1 CR8047M FD controller
1 CR80XXM 6250 BPI Tape Adapter
1 CR8087M SFA
2 CR80XXM DCI 1,535,490
3 6250 BPI Tape drives 450,000
3 Racks 52,899
2 Mains Filters 13,364
2 Power Distributer 5,278
1 Dual Floppy drive 24,171
1 Cables 20,000
total HW cost 3̲,̲3̲8̲9̲,̲6̲2̲9̲
3.5 S̲p̲a̲r̲e̲ ̲P̲a̲r̲t̲s̲
The cost of CR80 spare parts is calculated according
to the preliminary list below:
1 CR8050M Power Supply
2 CR80XXM 1 MW RAM
1 CR8003M CPU
1 CR80XXM SDI
1 CR80XXM SDA
1 CR80XXM Tape controller
1 CR80XXM 6250 TA
1 CR8047M FD controller
1 CR8087M SFA
Total cost, CR80 spare parts: 6̲4̲5̲,̲6̲1̲7̲
3.6 O̲p̲t̲i̲o̲n̲s̲
We are prepared to quote additions, expansions and
changes to the baseline system upon request.
We are also prepared to quote e.g. a prototype SDPS
with less performance in terms of number of channels,
with easy upgrading by addition of modules. This reduction
in prototype performance would reduce the price by
approx. one million in hardware cost (two FPP's and
three RAM modules less).
We have been specifically askes to indicate the price
implications of the following options:
a) No format conditioning required on SDI.
This will reduce the development cost of the SDI
by approx. 15 percent. The per-item cost of the
SDI is reduced by about 10 percent.
b) No gain correction.
This would have no influence hardware, but the
software will have one requirement less.
The influence on the software development effort
will be very low, corresponding to about one man-week.
c) 65 constants in spatial resampling instead of 50.
The increase in the number of constants implies
both increased processing and increased storage
requirements.
Assuming that the processing power is unchanges
(e.g. less channels or lower sampling rate when
the number of constants is high), the increase
in storage capacity will increase the hardware
development effort by approx. 3 man-weeks and the
per-item cost of the FPP's by approx. 15,000.
4̲ ̲ ̲M̲A̲I̲N̲T̲E̲N̲A̲N̲C̲E̲
We have not quoted maintenance cost here, but we are
prepared to do so as soon as we have knowledge about
your requirements in this area.
5̲ ̲ ̲T̲R̲A̲I̲N̲I̲N̲G̲
We are prepared to quote Training cost after having
discussed requirements with you.
6̲ ̲ ̲B̲I̲D̲D̲I̲N̲G̲ ̲P̲R̲O̲V̲I̲S̲I̲O̲N̲S̲
Please find below the bidding provisions applicable
to Christian Rovsing A/SA present bid for the supply
of Seismic Data Preprocessing System.
Christian Rovsing A/S expects a detailed contraft negotiation
to take place at a later state.
6.1 V̲a̲l̲i̲d̲i̲t̲y̲
This proposal shall remain valid and open for accept
until September 15, 1982.
6.2 T̲e̲r̲m̲s̲ ̲o̲f̲ ̲P̲a̲y̲m̲e̲n̲t̲
Payment terms are to be negotiated. The baseline is
payment terms securing Christian Rovsing A/S a balanced
cash flow throughout the project execution. All Expenditures
in US Dollars are to be paid in US Dollars.
6.3 P̲r̲i̲c̲e̲ ̲V̲a̲r̲i̲a̲t̲i̲o̲n̲s̲
The prices for phase I and phase II are fixed prices
with provision for price escalation in accordnace with
official price index changes.
The price for phase III and the Recurring cost are
budgetary prices.
6.4 D̲e̲l̲i̲v̲e̲r̲y̲
Delivery will take place at customers site according
to section II, Management Proposal.
6.5 T̲a̲x̲e̲s̲ ̲a̲n̲d̲ ̲D̲u̲t̲i̲e̲s̲
All Prices quoted are exclusive of Danish value added
tax such tax are to be paid by customer. Currently,
export from Denmark is exempt from Danish value added
tax.
All taxes and duties which applies after the point
of delivery are to be paid by the customer.
6.6 R̲o̲y̲a̲l̲t̲y̲
It is assumes that no royalty has to be paid to any
third party.
6.7 G̲o̲v̲e̲r̲n̲m̲e̲n̲t̲ ̲R̲e̲s̲t̲r̲i̲c̲t̲i̲o̲n̲s̲
The proposal is prepared taking into consideration
only the legislation in force as of today. In case
of legislation affecting this project or in case Government
restrictions are imposed on Christian Rovsing A/S after
this date, the proposal shall be adjusted accordingly.
6.8 P̲r̲o̲p̲r̲i̲e̲t̲a̲r̲y̲ ̲R̲i̲g̲h̲t̲s̲
All proprietary rights to equipment and software developed
and built for the project shall remain the exclusive
property of Christian Rovsing A/S.
The customer shall have unrestricted rights of use
of the deliverables for purpose for which the deliverables
are intended.
6.9 F̲o̲r̲c̲e̲ ̲M̲a̲j̲e̲u̲r̲e̲
In the event Christian Rovsing A/S is delayed in performing
any of its respective obligations under this project
and such delay is caused by force majeure, such delay
shall be added to the time.
6.10 G̲o̲v̲e̲r̲n̲i̲n̲g̲ ̲L̲a̲w̲
The contract and the performance hereof shall be governed
and construed in accordance with the laws of the Kingdom
of Denmark.
6.11 A̲r̲b̲i̲t̲r̲a̲t̲i̲o̲n̲
In the event of any dispute or difference between the
parties hereto as to any matter or thing arising out
of or ralating to this project which cannot be settled
by the parties themselves, the dispute shall be settled
definitely and finally by arbitration in accordance
with the rule of procedure of the Copenhagen International
Court of Arbitration.
The language of arbitration shall be English.
