top - metrics - download
⟦b84669b87⟧ Wang Wps File
Length: 47157 (0xb835)
Types: Wang Wps File
Notes: CPS/TSS/000
Names: »0852A «
Derivation
└─⟦3eaaffc64⟧ Bits:30006034 8" Wang WCS floppy, CR 0057A
└─⟦this⟧ »0852A «
WangText
…0c……00……00……00……00……1a……0a……00……00……1a……0b……1a… …19……0c……19……06……18……0f……17……08……17……02……16……0b……16… …15……0e……15……07……14……09……14……0b……14……0d……14……01……14… …14……05……14……06……14……07……13……08……13……09……13……86…1 …02… …02… …02…
…02…CPS/TSS/000
…02…URH/810502…02……02…#
ACCEPTANCE TEST SPECIFICATION
…02……02…CAMPS
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
1 GENERAL.......................................
1
1.1 PURPOSE...................................
1
1.2 PROJECT REFERENCES........................
2
1.3 TERMS AND ABBREVIATIONS...................
3
2 REQUIREMENT MAPPING...........................
4
2.1 VERIFICATION DEFINITIONS..................
4
2.1.1 Examination...........................
4
2.1.2 Analysis..............................
5
2.1.3 Test/Demonstration....................
5
2.2 ACCEPTANCE TEST CROSS REFERENCE INDEX.....
5
3 DSMT H/W TEST.................................
19
3.1 TEST SPECIFICATION........................
19
3.1.1 Test Purpose..........................
19
3.1.2 Test Object Identification............
19
3.1.3 Requirements..........................
19
3.1.4 System Functions......................
19
3.1.5 Test/Function Relationship............
19
3.2 TEST METHODS AND CONSTRAINTS..............
20
3.2.1 System Test Condition.................
20
3.2.2 Extend of System Test..................
20
3.2.3 Data Recording........................
20
3.2.4 System Test Constraints...............
20
3.3 TEST EVALUATION...........................
20
3.3.1 Test Data Criteria....................
21
3.3.2 Test Data Reduction...................
21
3.4 TESTGROUP DESCRIPTION.....................
21
3.4.1 Testgroup No 1........................
21
3.4.1.1 General Description...............
21
3.4.1.2 Test Control......................
21
3.4.1.3-5 N.A...............................
21
3.4.1.6 Output Notification...............
22
3.4.2 Testgroup No 2........................
22
3.4.2.1 General Description...............
22
3.4.2.2 Test Control......................
22
3.4.2.3-5 N.A...............................
22
3.4.2.6 Output Notification...............
22
3.4.3 Testgroup No 3........................
22
3.4.3.1 General Description...............
23
3.4.3.2 Test Control......................
23
3.4.3.3-5 N.A...............................
23
3.4.3.6 Output Notification...............
23
3.4.4 Testgroup No 4........................
23
3.4.4.1 General Description...............
24 3.4.4.2 Test Control......................
24
3.4.4.3-6 N.A...............................
24
4 FACTORY ACCEPTANCE TEST.......................
24
4.1 TEST SPECIFICATION........................
24
4.1.1 Test Purpose..........................
24
4.1.2 Test Object Identification............
25
4.1.2.1 Hardware Configuration............
25
4.1.2.2 Software Configuration............
25
4.1.3 Requirements..........................
25
4.1.4 System Functions......................
25
4.1.5 Test/Function Relationship............
25
4.2 TEST METHODS & CONSTRAINTS................
27
4.2.1 System Test Conditions................
27
4.2.2 Extend of System Test.................
27
4.2.3 Data Recording........................
27
4.2.4 System Test Constraints...............
27
4.3 TEST EVALUATION...........................
27
4.3.1 Test Data Criteria....................
27
4.3.2 Test Data Reduction...................
27
4.4 TESTGROUP DESCRIPTION.....................
28
4.4.1 Testgroup No 1........................
28
4.4.1.1 General Description...............
28
4.4.1.2 Test Control......................
28
4.4.1.3 Input Data........................
28
4.4.1.4 Input Commands....................
28
4.4.1.5 Output Data.......................
29
4.4.1.6 Output Notification...............
29
4.4.2 Testgroup No 2........................
29
4.4.2.1 General Description...............
29
4.4.2.2 Test Control......................
30
4.4.2.3 Input Data........................
30
4.4.2.4 Input Commands....................
30
4.4.2.5 Output Data.......................
31
4.4.2.6 Output Notification...............
31
4.4.3 Testgroup No 3........................
31
4.4.3.1 General Description...............
31
4.4.3.2 Test Control......................
31
4.4.3.3 Input Data........................
32
4.4.3.4 Input Commands....................
32
4.4.3.5 Output Data.......................
32
4.4.3.6 Output Notification...............
32
4.4.4 Testgroup No 4........................
32
4.4.4.1 General Description...............
32
4.4.4.2 Test Control......................
33
4.4.4.3 Input Data........................
33
4.4.4.4 Input Commands....................
33
4.4.4.5 Output Data.......................
33
4.4.4.6 Output Notification...............
33
4.4.5 Testgroup No 5........................
33
4.4.5.1 General Description...............
33 4.4.5.2 Test Control......................
34
4.4.5.3 Input Data........................
34
4.4.5.4 Input Commands....................
34
4.4.5.5 Output Data.......................
34
4.4.5.6 Output Notification...............
34
4.4.6 Testgroup No 6........................
34
4.4.6.1 General Description...............
34
4.4.6.2 Test Control......................
35
4.4.6.3 Input Data........................
35
4.4.6.4 Input Commands....................
35
4.4.6.5 Output Data.......................
35
4.4.6.6 Output Notification...............
35
5 DSMT SW TEST..................................
36
5.1 TEST SPECIFICATION........................
36
5.1.1 Test Purpose..........................
36
5.1.2 Test Object Identification............
36
5.1.2.1 Hardware Configuration............
36
5.1.2.2 Software Configuration............
36
5.1.3 Requirements..........................
36
5.1.4 System Function.......................
37
5.1.5 Test/Function Relationship............
37
5.2 TEST METHODS & CONSTRAINTS................
39
5.2.1 System Test Conditions................
39
5.2.2 Extend of System Test.................
39
5.2.3 Data Recording........................
39
5.2.4 System Test Constraints...............
39
5.3 TEST EVALUATION...........................
40
5.3.1 Test Data Criteria....................
40
5.3.2 Test Data Reduction...................
40
5.4 TESTGROUP DESCRIPTION.....................
40
5.4.1 Testgroup No 1........................
40
5.4.1.1 General Description...............
40
5.4.1.2 Test Control......................
41
5.4.1.3 Input Data........................
41
5.4.1.4 Input Commands....................
41
5.4.1.5 Output Data.......................
41
5.4.1.6 Output Notification...............
41
5.4.2 Testgroup No 2........................
41
5.4.2.1 General Description...............
41
5.4.2.2 Test Control......................
42
5.4.2.3 Input Data........................
42
5.4.2.4 Input Commands....................
42
5.4.2.5 Output Data.......................
43
5.4.2.6 Output Notification...............
43
5.4.3 Testgroup No 3........................
43
5.4.3.1 General Description...............
43
5.4.3.2 Test Control......................
43 5.4.3.3 Input Data........................
44
5.4.3.4 Input Commands....................
44
5.4.3.5 Output Data.......................
44
5.4.3.6 Output Notification...............
44
5.4.4 Testgroup No 4........................
44
5.4.4.1 General Description...............
44
5.4.4.2 Test Control......................
45
5.4.4.3 Input Data........................
45
5.4.4.4 Input Commands....................
45
5.4.4.5 Output Data.......................
45
5.4.4.6 Output Notification...............
45
5.4.5 Testgroup No 5........................
45
5.4.5.1 General Description...............
45
5.4.5.2 Test Control......................
46
5.4.5.3 Input Data........................
46
5.4.5.4 Input Commands....................
46
5.4.5.5 Output Data.......................
46
5.4.5.6 Output Notification...............
46
5.4.6 Testgroup No 6........................
46
5.4.6.1 General Description...............
46
5.4.6.2 Test Control......................
47
5.4.6.3 Input Data........................
47
5.4.6.4 Input Commands....................
47
5.4.6.5 Output Data.......................
47
5.4.6.6 Output Notification...............
47
6 IN-PLANT S/W TEST.............................
48
6.1 TEST SPECIFICATION........................
48
6.1.1 Test Purpose..........................
48
6.1.2 Test Object Identification............
48
6.1.2.1 H/W Configuration.................
48
6.1.2.2 S/W Configuration.................
48
6.1.3 Requirements..........................
49
6.1.4 System Functions......................
50
6.1.5 Test/Function Relationship............
54
6.2 TEST METHODS & CONSTRAINTS................
60
6.2.1 System Test Conditions................
60
6.2.2 Extend of System Test.................
60
6.2.3 Data Recording........................
61
6.2.4 System Test Constraints...............
61
6.3 TEST EVALUATION...........................
61
6.3.1 Test Data Criteria....................
61
6.3.2 Test Data Reduction...................
61
6.4 TESTGROUP DESCRIPTION.....................
62
6.4.1 Testgroup No. 1.........................
62
6.4.1.1 General Description...............
62
6.4.1.2 Test Control......................
62
6.4.1.3 Input Data........................
63
6.4.1.4 Input Commands....................
63
6.4.1.5 Output Data.......................
63
6.4.1.6 Output Notification...............
63
6.4.2 Testgroup No 2........................
64
6.4.2.1 General Description...............
64
6.4.2.2 Test Control......................
64
6.4.2.3 Input Data........................
64
6.4.2.4 Input Commands....................
64
6.4.2.5 Output Data.......................
64
6.4.2.6 Output Notification...............
65
6.4.3 Testgroup No 3........................
65
6.4.3.1 General Description...............
65
6.4.3.2 Test Control......................
66
6.4.3.3 Input Data........................
66
6.4.3.4 Input Commands....................
67
6.4.3.5 Output Data.......................
67
6.4.3.6 Output Notification...............
68
6.4.4 Testgroup No 4........................
68
6.4.4.1 General Description...............
68
6.4.4.2 Test Control......................
69
6.4.4.3 Input Data........................
69
6.4.4.4 Input Commands....................
69
6.4.4.5 Output Data.......................
69
6.4.4.6 Output Notification...............
70
6.4.5 Testgroup No 5........................
70
6.4.5.1 General Description...............
70
6.4.5.2 Test Control......................
71
6.4.5.3 Input Data........................
71
6.4.5.4 Input Commands....................
71
6.4.5.5 Output Data.......................
72
6.4.5.6 Output Notification...............
72
6.4.6 Output Notification...................
72
6.4.6.1 General Description...............
72
6.4.6.2 Test Control......................
73
6.4.6.3 Input Data........................
73
6.4.6.4 Input Commands....................
73
6.4.6.5 Output Data.......................
73
6.4.6.6 Output Notification...............
73
6.4.7 Testgroup No 7........................
74
6.4.7.1 General Description...............
74
6.4.7.2 Test Control......................
74
6.4.7.3 Input Data........................
74
6.4.7.4 Input Commands....................
74
6.4.7.5 Output Data.......................
75
6.4.7.6 Output Notification...............
75
6.4.8 Testgroup No 8........................
75
6.4.8.1 General Description...............
75
6.4.8.2 Test Control......................
76
6.4.8.3 Input Data........................
76
6.4.8.4 Input Commands....................
77
6.4.8.5 Output Data.......................
77
6.4.8.6 Output Notification...............
77
6.4.9 Testgroup No 9........................
77
6.4.9.1 General Description...............
77
6.4.9.2 Test Control......................
78
6.4.9.3 Input Data........................
78
6.4.9.4 Input Commands....................
78
6.4.9.5 Output Data.......................
78
6.4.9.6 Output Notification...............
79
6.4.10 Testgroup No 10.....................
79
6.4.10.1 General Description.............
79
6.4.10.2 Test Control....................
79
6.4.10.3 Input Data......................
80
6.4.10.4 Input Commands..................
80
6.4.10.5 Output Data.....................
80
6.4.10.6 Output Notification.............
80
6.4.11 Testgroup No 11.....................
80
6.4.11.1 General Description.............
80
6.4.11.2 Test Control....................
81
6.4.11.3 Input Data......................
81
6.4.11.4 Input Commands..................
81
6.4.11.5 Output Data.....................
81
6.4.11.6 Output Notification.............
81
6.4.12 Testgroup No 12.....................
81
6.4.12.1 General Description.............
82
6.4.12.2 Test Control....................
82
6.4.12.3 Input Data......................
82
6.4.12.4 Input Commands..................
82
6.4.12.5 Output Data.....................
82
6.4.12.6 Output Notification.............
82
7 S/W FUNCTIONAL TEST...........................
83
7.1 TEST SPECIFICATION........................
83
7.1.1 Test Purpose..........................
83
7.1.2 Test Object Identification............
83
7.1.2.1 H/W Configuration.................
83
7.1.2.2 S/W Configuration.................
83
7.1.3 Requirements..........................
84
7.1.4 System Function.......................
85
7.1.5 Test/Function Relationship............
89
7.2 TEST METHODS AND CONSTRAINTS..............
95
7.2.1 System Test Conditions................
95
7.2.2 Extend of System Test.................
95
7.2.3 Data Recording........................
95
7.2.4 System Test Constraints...............
95
7.3 TEST EVALUATION...........................
95
7.3.1 Test Data Criteria....................
95
7.3.2 Test Data Reduction...................
96
7.4 TESTGROUP DESCRIPTION.....................
96
7.4.1 Testgroup No 1........................
96
7.4.1.1 General Description...............
96
7.4.1.2 Test Control......................
97
7.4.1.3 Input Data........................
97
7.4.1.4 Input Commands....................
97
7.4.1.5 Output Data.......................
97
7.4.1.6 Output Notification...............
98
7.4.2 Testgroup No 2........................
98
7.4.2.1 General Description...............
98
7.4.2.2 Test Control......................
98
7.4.2.3 Input Data........................
98
7.4.2.4 Input Commands....................
98
7.4.2.5 Output Data.......................
99
7.4.2.6 Output Notification...............
99
7.4.3 Testgroup No 3........................
99
7.4.3.1 General Description...............
99
7.4.3.2 Test Control......................
100
7.4.3.3 Input Data........................
100
7.4.3.4 Input Commands....................
100
7.4.3.5 Output Data.......................
101
7.4.3.6 Output Notification...............
101
7.4.4 Testgroup No 4........................
102
7.4.4.1 General Description...............
102
7.4.4.2 Test Control......................
102
7.4.4.3 Input Data........................
102
7.4.4.4 Input Commands....................
103
7.4.4.5 Output Data.......................
103
7.4.4.6 Output Notification...............
103
7.4.5 Testgroup No 5........................
104
7.4.5.1 General Description...............
104
7.4.5.2 Test Control......................
105
7.4.5.3 Input Data........................
105
7.4.5.4 Input Commands....................
105
7.4.5.5 Output Data.......................
105
7.4.5.6 Output Notification...............
106
7.4.6 Testgroup No 6........................
106
7.4.6.1 General Description...............
106
7.4.6.2 Test Control......................
106
7.4.6.3 Input Data........................
106
7.4.6.4 Input Commands....................
107
7.4.6.5 Output Data.......................
107
7.4.6.6 Output Notification...............
107
7.4.7 Testgroup No 7........................
107
7.4.7.1 General Description...............
108
7.4.7.2 Test Control......................
108
7.4.7.3 Input Data........................
108
7.4.7.4 Input Commands....................
108
7.4.7.5 Output Data.......................
109
7.4.7.6 Output Notification...............
109
7.4.8 Testgroup No 8........................
110
7.4.8.1 General Description...............
110
7.4.8.2 Test Control......................
111
7.4.8.3 Input Data........................
111
7.4.8.4 Input Commands....................
111
7.4.8.5 Output Data.......................
111
7.4.8.6 Output Notification...............
111
7.4.9 Testgroup No 9........................
112
7.4.9.1 General Description...............
112
7.4.9.2 Test Control......................
112
7.4.9.3 Input Data........................
112
7.4.9.4 Input Commands....................
112
7.4.9.5 Output Data.......................
113
7.4.9.6 Output Notification...............
113
7.4.10 Testgroup No 10.....................
113
7.4.10.1 General Description.............
113
7.4.10.2 Test Control....................
113
7.4.10.3 Input Data......................
114
7.4.10.4 Output Data.....................
114
7.4.10.5 Output Notification.............
114
7.4.11 Testgroup No 11.....................
114
7.4.11.1 General Description.............
114
7.4.11.2 Test Control....................
114
7.4.11.3 Input Data......................
115
7.4.11.4 Input Commands..................
115
7.4.11.5 Output Data.....................
115
7.4.11.6 Output Notification.............
115
7.4.12 Testgroup No. 12....................
115
7.4.12.1 General Description.............
116
7.4.12.2 Test Control....................
116
7.4.12.3 Input Data......................
116
7.4.12.4 Input Commands..................
116
7.4.12.5 Output Data.....................
116
7.4.12.6 Output Notification.............
116
8 S/W OPERATIONAL TEST..........................
117
8.1 TEST SPECIFICATION........................
117
8.1.1 Test Purpose..........................
117
8.1.2 Test Object Identification............
117
8.1.2.1 H/W Configuration.................
117
8.1.2.2 S/W Configuration.................
117
8.1.3 Requirements..........................
117
8.1.4 System Function.......................
119
8.1.5 Test/Function Relationship............
123
8.2 TEST METHODS AND CONSTRAINTS..............
123
8.2.1 System Test Conditions................
123
8.2.2 Extend of System Test.................
124
8.2.3 Data Recording........................
124
8.2.4 System Test Constraints...............
124
8.3 TEST EVALUATION...........................
124
8.3.1 Test Data Criteria....................
124
8.3.2 Test Data Reduction...................
126
9 S/W VERIFICATION SITE 2-16....................
126
9.1 TEST SPECIFICATION........................
126
9.1.1 Test Purpose..........................
126
9.1.2 Test Object Identification............
127
9.1.2.1 H/W Configuration.................
127
9.1.2.2 S/W Configuration.................
127
1̲ ̲G̲E̲N̲E̲R̲A̲L̲
1.1 P̲U̲R̲P̲O̲S̲E̲
The purpose of this document is:
a) to identify all requirements to be verified by
test/demonstration.
b) to map testable requirements onto the individual
Acceptance Test tasks
c) for each Acceptance Test task to specify:
1. Test methods
2. " constraints
3. " evaluation
4. " description
1.2 P̲R̲O̲J̲E̲C̲T̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲S̲
a) CAMPS System Requirements Spec. CPS/210/SYS/0001
b) CAMPS Acceptance Plan CPS/PLN/012
c) User Procedures and Associated Formats
CPS/230/ICD/0001
d) Supervisor Commands and Procedures
CPS/230/ICD/0002
1.3 T̲E̲R̲M̲S̲ ̲A̲N̲D̲ ̲A̲B̲B̲R̲E̲V̲I̲A̲T̲I̲O̲N̲S̲
CR C̲hristian R̲ovsing A/S
DSMT D̲evelopment, S̲oftware, M̲aintenance
and T̲est.
This is the CAMPS prototype
M & D M̲aintenance and D̲iagnostics
SRS CAMPS S̲ystem R̲equirement S̲pecification.
WP W̲ork P̲ackage
2̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲ ̲M̲A̲P̲P̲I̲N̲G̲
This section contains a listing of the CAMPS Requirements
as stated in the SRS table of contents.
For each of the listed requirements a cross reference
is made indicating the planned verification method.
For each requirement which is planned to be verified
by test it is further indicated in which Acceptance
Test task the verification is planned to take place.
The resulting mapping of stated requirements onto the
Acceptance Test tasks is used as basis for the elaboration
of the Acceptance Test Specifications contained in
sections 3-9 of this document.
2.1 V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲D̲E̲F̲I̲N̲I̲T̲I̲O̲N̲S̲
The following definitions apply for the planned verification
methods:
2.1.1 E̲x̲a̲m̲i̲n̲a̲t̲i̲o̲n̲
This method is a nonfunctional verification such as
visual inspection of the physical characteristics of
the item or of the documentation associated with the
item.
2.1.2 A̲n̲a̲l̲y̲s̲i̲s
This method is a nonfunctional verification, such as
reduction or translation of data, review of analytical
data, or review of performances from a detailed test.
Data may be brought forward from previous tests.
2.1.3 T̲e̲s̲t̲/̲D̲e̲m̲o̲n̲s̲t̲r̲a̲t̲i̲o̲n̲
This method of testing is to functionally exercise
the equipment such that measurements and observations
of correct operation can be made. Elements not directly
measured or observed are demonstrated by implication.
2.2 A̲C̲C̲E̲P̲T̲A̲N̲C̲E̲ ̲T̲E̲S̲T̲ ̲C̲R̲O̲S̲S̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲ ̲I̲N̲D̲E̲X̲
On the following pages is shown the requirement mapping.
SKEMA 1
SKEMA 2
SKEMA 3
SKEMA 4
SKEMA 5
SKEMA 6
SKEMA 7
SKEMA 8
SKEMA 9
SKEMA 10
SKEMA 11
SKEMA 12
SKEMA 13
3̲ ̲D̲S̲M̲T̲ ̲H̲/̲W̲ ̲T̲E̲S̲T̲
3.1 T̲E̲S̲T̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲A̲T̲I̲O̲N̲
3.1.1 T̲e̲s̲t̲ ̲P̲u̲r̲p̲o̲s̲e̲
The purpose of this test is to give a verification
of the SRS-stated testable requirements related to
the CAMPS H/W.
3.1.2 T̲e̲s̲t̲ ̲O̲b̲j̲e̲c̲t̲ ̲i̲d̲e̲n̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
The test will be conducted on the H/W comprised in
the DSMT (prototype) equipment:
3.1.3 R̲e̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲
With reference to para 2 the following requirements
will be verified during this test:
3.4.2.2 Power Input
3.5.2.1 Environmental Testing
3.5.2.4 Interchangeability
3.5.2.16 Acoustic Noise
3.1.4 S̲y̲s̲t̲e̲m̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲s̲
The requirements to be verified during this test are
describing H/W attributes rather than system functions.
3.1.5 T̲e̲s̲t̲/̲F̲u̲n̲c̲t̲i̲o̲n̲ ̲R̲e̲l̲a̲t̲i̲o̲n̲s̲h̲i̲p̲
N.A.
3.2 T̲E̲S̲T̲ ̲M̲E̲T̲H̲O̲D̲S̲ ̲A̲N̲D̲ ̲C̲O̲N̲S̲T̲R̲A̲I̲N̲T̲S̲
3.2.1 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲d̲i̲t̲i̲o̲n̲
During test conductance the functional ability of the
DSMT H/W is monitored by execution of the necessary
test drive software.
The verification of the requirements concerning:
a) Power input
b) Environment
c) Interchangeability
is accomplished by successful execution of the test
drive software.
3.2.2 E̲x̲t̲e̲n̲d̲ ̲o̲f̲ ̲S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲
This test is a qualification test for comprised hardware
3.2.3 D̲a̲t̲a̲ ̲R̲e̲c̲o̲r̲d̲i̲n̲g̲
Test Data will be manually recorded and supported by
relevant print-out.
3.2.4 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲s̲t̲r̲a̲i̲n̲t̲s̲
N.A.
3.3 T̲E̲S̲T̲ ̲E̲V̲A̲L̲U̲A̲T̲I̲O̲N̲
3.3.1 T̲e̲s̲t̲ ̲D̲a̲t̲a̲ ̲C̲r̲i̲t̲e̲r̲i̲a̲
The test acceptance criteria is compliance with the
requirements.
3.3.2 T̲e̲s̲t̲ ̲D̲a̲t̲a̲ ̲R̲e̲d̲u̲c̲t̲i̲o̲n̲
N.A.
3.4 T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲
The overall testactivity is divided into 4 testgroups.
3.4.1 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲1̲
3.4.1.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This test group will give a verification of requirement:
3.4.2.2 Power Input
3.4.1.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
Execution of this testgroup will be controlled by application
of worst case values regarding power amplitude and
-frequency.
3.4.1.3 - 5
N.A.
3.4.1.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Any H/W failure detected by the test drive software
during the test execution will be displayed on the
operator's VDU
3.4.2 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲2̲
3.4.2.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of requirement:
3.5.2.1 Environment Testing
3.4.2.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
Execution of this testgroup will be controlled by exposing
the equipment to varying ambient temperature and -humidity
conditions within the limits of the specified ranges.
The test method will be in accordance with NGTS, issue
2, Jan. 75.
3.4.2.3-5
N.A.
3.4.2.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Any H/W-failure detected by the test drive software
during the test execution will be displayed on the
operator's VDU.
3.4.3 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲3̲
3.4.3.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of requirement:
3.5.2.4 Interchangeability
3.4.3.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The execution of this testcase is controlled by interchanging
each interchangeable H/W module, one by one with an
identical module.
3.4.3.3 -5
N.A.
3.4.3.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Any H/W-failure detected by the test drive software
during the test execution will be displayed on the
operator's VDU
3.4.4 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲4̲
3.4.4.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of requirement:
3.5.2.16 Acoustic Noise
3.4.4.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
Execution of this testcase will consist of measuring
the acoustical noiselevel from the rackmounted equipment.
3.4.4.3 - 6
N.A.
4̲ ̲F̲A̲C̲T̲O̲R̲Y̲ ̲A̲C̲C̲E̲P̲T̲A̲N̲C̲E̲ ̲T̲E̲S̲T̲
4.1 T̲E̲S̲T̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲A̲T̲I̲O̲N̲
4.1.1 T̲e̲s̲t̲ ̲P̲u̲r̲p̲o̲s̲e̲
The purpose of this test is to verify that all H/W
comprised in an integrated CAMPS configuration fulfils
its functional specification.
4.1.2 T̲e̲s̲t̲ ̲O̲b̲j̲e̲c̲t̲ ̲I̲d̲e̲n̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
4.1.2.1 H̲a̲r̲d̲w̲a̲r̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
The test will be conducted on the H/W comprised in
each individual CAMPS site configuration.
4.1.2.2 S̲o̲f̲t̲w̲a̲r̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
The DAMOS S/W package.
4.1.3 R̲e̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲
The CAMPS H/W functions are implicitly verified through
verification of:
3.5.11.2 System Software
4.1.4 S̲y̲s̲t̲e̲m̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲s̲
The CAMPS H/W functions will implicitly be verified
through exercise of the following functions:
a) Multiprogramming and scheduling at run time
b) Store Management
c) Device control and interrupt response
d) Interprocess interfaces
e) Fault handling
f) Maintenance and diagnostics (M&D) S/W
4.1.5 T̲e̲s̲t̲/̲F̲u̲n̲c̲t̲i̲o̲n̲ ̲R̲e̲l̲a̲t̲i̲o̲n̲s̲h̲i̲p̲
The test activities are divided into 6 testgroups.
In each testgroup a set of related functions will be
verified. On the function/test matrix shown overleaf
is given an overview of the contents of the individual
testgroups.
FUNCTION/TEST-MATRIX
TESTGROUP NO.
FUNCTION 1 2 3 4 5 6
Device control and interrupt response
Fault handling
Maintenance and Diagnostics
Storage management
Multiprogramming and scheduling
at runtime
Interprocess interfaces
4.2 T̲E̲S̲T̲ ̲M̲E̲T̲H̲O̲D̲S̲ ̲&̲ ̲C̲O̲N̲S̲T̲R̲A̲I̲N̲T̲S̲
4.2.1 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲d̲i̲t̲i̲o̲n̲s̲
The H/W is exercised through execution of the functions
listed under 4.1.4. The functions will be invoked by
means of special purpose test S/W.
4.2.2 E̲x̲t̲e̲n̲d̲ ̲o̲f̲ ̲S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲
The test will provide a verification of the facilities
described in the SRS para 3.5.11.2.
4.2.3 D̲a̲t̲a̲ ̲R̲e̲c̲o̲r̲d̲i̲n̲g̲
All test results will be presented as printed output.
4.2.4 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲s̲t̲r̲a̲i̲n̲t̲s̲
The functional specification of the H/W is only verified
to the extend possible by means of the DAMOS kernel
functions.
4.3 T̲E̲S̲T̲ ̲E̲V̲A̲L̲U̲A̲T̲I̲O̲N̲
4.3.1 T̲e̲s̲t̲ ̲D̲a̲t̲a̲ ̲C̲r̲i̲t̲e̲r̲i̲a̲
Successful execution of the under 4.1.4 listed functions
will be the test acceptance criteria.
4.3.2 T̲e̲s̲t̲ ̲D̲a̲t̲a̲ ̲R̲e̲d̲u̲c̲t̲i̲o̲n̲
N.A.
4.4 T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲
4.4.1 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲1̲
4.4.1.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of DAMOS Device
Control and Interrupt Response functions. The following
devices will be considered:
Disk
Floppy Disk
LTU
LTUX
For all of the devices it shall be verified that data
can be transferred to and from the device.
Verification of the standardized interface for control
of the different devices is done by inspection of the
DAMOS product specification
4.4.1.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of special purpose
test S/W.
4.4.1.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
4.4.1.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU
4.4.1.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Test output data shall be presented as printed output
4.4.1.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notifed on the
operator's VDU
4.4.2 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲2̲
4.4.2.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the DAMOS
Fault Handling functions. In general the Fault Handling
mechanism consists of:
a) error detection
b) error reporting
The error reporting facility provides a standard interface
for sending error reports via an error synchronization
element.
The error detection facilities are provided by H/W
as well as S/W. S/W detected errors which cannot be
handled by the S/W unit itself are, as well as H/W
detected errors, reported via the error reporting facility.
The test shall consist of a simulation of the following
types of errors:
a) timer action
b) page faults
c) illegal instructions
d) memory parity error
e) device timeout
f) memory timeout
g) protection failure
h) privilege violation
Further the test shall contain examples of S/W initiated
error reporting.
4.4.2.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of testprograms
and H/W manipulation. Each of the H/W detectable errortypes
as well as S/W detected error reporting shall be simulated.
4.4.2.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
4.4.2.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
4.4.2.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Test output data shall be presented as printed output.
4.4.2.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU
4.4.3 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲3̲
4.4.3.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the availability
of the DAMOS Maintenance and Diagnostics (M & D) S/W
consisting of the following units:
a) CPU Test
b) Memory MAP, MIA "
c) RAM "
d) PROM "
e) CIA "
f) TDX I/F, TIA "
g) TDX Bus "
h) LTUX "
I) I/O Bus "
j) LTU "
k) Disk Controller "
l) Disk Drive "
m) Disk Pack "
n) Line Printer "
o) Floppy Disk "
4.4.3.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by a sequential execution of
the listed M & D S/W units.
4.4.3.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
4.4.3.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual M & D programs are invoked by operator
commands controlled from the operator's VDU.
4.4.3.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
All output data shall be presented as printed output.
4.4.3.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
4.4.4 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲4̲
4.4.4.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the DAMOS
Storage Management functions.
The following functions will be verified:
a) initialization of data areas
b) deletion of data areas
c) allocation of main memory
d) deallocation of main memory
e) allocation of backing memory
f) deallocation of backing memory
g) memory access control
4.4.4.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of special purpose
test S/W.
4.4.4.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
4.4.4.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
4.4.4.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Test output data shall be presented as printed output.
4.4.4.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
4.4.5 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲5̲
4.4.5.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the DAMOS
Process Management (Multiprogramming and scheduling
at run time) functions. The following fucntions will
be verified:
a) process creation
b) process deletion
c) time slicing
d) change of process priority
4.4.5.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of special purpose
test S/W.
4.4.5.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
4.4.5.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
4.4.5.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Output data shalll be presented as printed output.
4.4.5.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
4.4.6 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲6̲
4.4.6.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of DAMOS Interprocess
Interface functions.
The following functions will be verified:
a) send synchronization
b) await synchronization
c) send information
d) await information
4.4.6.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by ececution of special purpose
test S/W.
4.4.6.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
4.4.6.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
4.4.6.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Output data shall be presented as printed output.
4.4.6.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
5̲ ̲D̲S̲M̲T̲ ̲S̲W̲ ̲T̲E̲S̲T̲
5.1 T̲E̲S̲T̲ ̲S̲P̲E̲C̲I̲F̲I̲C̲A̲T̲I̲O̲N̲
5.1.1 T̲e̲s̲t̲ ̲P̲u̲r̲p̲o̲s̲e̲
The purpose of this test is to give a verification
of the facilities of the CAMPS system S/W described
in the SRS para 3.5.11.2.
5.1.2 T̲e̲s̲t̲ ̲O̲b̲j̲e̲c̲t̲ ̲I̲d̲e̲n̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
5.1.2.1 H̲a̲r̲d̲w̲a̲r̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
The test will be conducted on the H/W comprised in
the DSMT.
5.1.2.2 S̲o̲f̲t̲w̲a̲r̲e̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
The DAMOS S/W package.
5.1.3 R̲e̲q̲u̲i̲r̲e̲m̲e̲n̲t̲s̲
With reference to para 2 this test will verify requirement:
3.5.11.2 System Software
5.1.4 S̲y̲s̲t̲e̲m̲ ̲F̲u̲n̲c̲t̲i̲o̲n̲
This test will give a verification of the following
CAMPS system S/W functions:
a) Multiprogramming and scheduling at run time
b) Store management
c) Device control and interrupt response
d) Interprocess interfaces
e) Fault handling
f) Maintenance and diagnostics (M & D)
5.1.5 T̲e̲s̲t̲/̲F̲u̲n̲c̲t̲i̲o̲n̲ ̲R̲e̲l̲a̲t̲i̲o̲n̲s̲h̲i̲p̲
The test activities in this test are divided into 6
testgroups. In each testgroup a set of related functions
will be verified. On the function/test matrix shown
overleaf is given an overview of the contents of the
individual testgroups.
FUNCTION/TEST-MATRIX
TESTGROUP NO.
FUNCTION 1 2 3 4 5 6
Device control and interrupt response
Fault handling
Maintenance and Diagnostics
Storage management
Multiprogramming and scheduling
at runtime
Interprocess interfaces
5.2 T̲E̲S̲T̲ ̲M̲E̲T̲H̲O̲D̲S̲ ̲&̲ ̲C̲O̲N̲S̲T̲R̲A̲I̲N̲T̲S̲
5.2.1 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲d̲i̲t̲i̲o̲n̲s̲
All functions to be verified in this test are provided
by the DAMOS kernel, which does not in itself contain
any user interface.
In order to establish the user interface for test execution
control a standard Terminal Operating System (TOS)
is implemented as a test tool. Verification of the
functions listed in para 5.1.4 a - e will be performed
by means of special purpose test S/W
5.2.2 E̲x̲t̲e̲n̲d̲ ̲o̲f̲ ̲S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲
The test will provide a verification of the facilities
described in the SRS para 3.5.11.2.
5.2.3 D̲a̲t̲a̲ ̲R̲e̲c̲o̲r̲d̲i̲n̲g̲
All test results will be presented as printed output
5.2.4 S̲y̲s̲t̲e̲m̲ ̲T̲e̲s̲t̲ ̲C̲o̲n̲s̲t̲r̲a̲i̲n̲t̲s̲
The functions verified in this test will, except for
the M & D S/W, not explicitly be available as CAMPS
functions. Thus this test is a verification of the
availability of the necessary facilities required for
implementation of CAMPS functions.
5.3 T̲E̲S̲T̲ ̲E̲V̲A̲L̲U̲A̲T̲I̲O̲N̲
5.3.1 T̲e̲s̲t̲ ̲D̲a̲t̲a̲ ̲C̲r̲i̲t̲e̲r̲i̲a̲
The availability of the functions listed in para 5.1.4
a - f will be the test acceptance criteria.
5.3.2 T̲e̲s̲t̲ ̲D̲a̲t̲a̲ ̲R̲e̲d̲u̲c̲t̲i̲o̲n̲
N.A.
5.4 T̲E̲S̲T̲G̲R̲O̲U̲P̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲
5.4.1 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲1̲
5.4.1.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of DAMOS Device
Control and Interrupt Response functions. The following
devices will be considered:
Disk
Floppy Disk
LTU
LTUX
For all of the devices it shall be verified that data
can be transferred to and from the device.
Verification of the standardized interface for control
of the different devices is done by inspection of the
DAMOS product specification
5.4.1.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of special purpose
test S/W.
5.4.1.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
5.4.1.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU
5.4.1.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Test output data shall be presented as printed output
5.4.1.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notifed on the
operator's VDU
5.4.2 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲2̲
5.4.2.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the DAMOS
Fault Handling functions. In general the Fault Handling
mechanism consists of:
a) error detection
b) error reporting
The error reporting facility provides a standard interface
for sending error reports via an error synchronization
element.
The error detection facilities are provided by H/W
as well as S/W. S/W detected errors which cannot be
handled by the S/W unit itself are, as well as H/W
detected errors, reported via the error reporting facility.
The test shall consist of a simulation of the following
types of errors:
a) timer action
b) page faults
c) illegal instructions
d) memory parity error
e) device timeout
f) memory timeout
g) protection failure
h) privilege violation
Further the test shall contain examples of S/W initiated
error reporting.
5.4.2.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of testprograms
and H/W manipulation. Each of the H/W detectable errortypes
as well as S/W detected error reporting shall be simulated.
5.4.2.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
5.4.2.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
5.4.2.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Test output data shall be presented as printed output.
5.4.2.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU
5.4.3 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲3̲
5.4.3.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the availability
of the DAMOS Maintenance and Diagnostics (M & D) S/W
consisting of the following units:
a) CPU Test
b) Memory MAP, MIA "
c) RAM "
d) PROM "
e) CIA "
f) TDX I/F, TIA "
g) TDX Bus "
h) LTUX "
I) I/O Bus "
j) LTU "
k) Disk Controller "
l) Disk Drive "
m) Disk Pack "
n) Line Printer "
o) Floppy Disk "
5.4.3.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by a sequential execution of
the listed M & D S/W units.
5.4.3.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
5.4.3.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual M & D programs are invoked by operator
commands controlled from the operator's VDU.
5.4.3.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
All output data shall be presented as printed output.
5.4.3.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
5.4.4 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲ ̲4̲
5.4.4.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the DAMOS
Storage Management functions.
The following functions will be verified:
a) initialization of data areas
b) deletion of data areas
c) allocation of main memory
d) deallocation of main memory
e) allocation of backing memory
f) deallocation of backing memory
g) memory access control
5.4.4.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of special purpose
test S/W.
5.4.4.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
5.4.4.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
5.4.4.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Test output data shall be presented as printed output.
5.4.4.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
5.4.5 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲5̲
5.4.5.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of the DAMOS
Process Management (Multiprogramming and scheduling
at run time) functions. The following fucntions will
be verified:
a) process creation
b) process deletion
c) time slicing
d) change of process priority
5.4.5.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by execution of special purpose
test S/W.
5.4.5.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
5.4.5.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
5.4.5.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Output data shalll be presented as printed output.
5.4.5.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
5.4.6 T̲e̲s̲t̲g̲r̲o̲u̲p̲ ̲N̲o̲.̲ ̲6̲
5.4.6.1 G̲e̲n̲e̲r̲a̲l̲ ̲D̲e̲s̲c̲r̲i̲p̲t̲i̲o̲n̲
This testgroup will give a verification of DAMOS Interprocess
Interface functions.
The following functions will be verified:
a) send synchronization
b) await synchronization
c) send information
d) await information
5.4.6.2 T̲e̲s̲t̲ ̲C̲o̲n̲t̲r̲o̲l̲
The test is controlled by ececution of special purpose
test S/W.
5.4.6.3 I̲n̲p̲u̲t̲ ̲D̲a̲t̲a̲
N.A.
5.4.6.4 I̲n̲p̲u̲t̲ ̲C̲o̲m̲m̲a̲n̲d̲s̲
The individual testprograms are invoked by operator
commands controlled from the operator's VDU.
5.4.6.5 O̲u̲t̲p̲u̲t̲ ̲D̲a̲t̲a̲
Output data shall be presented as printed output.
5.4.6.6 O̲u̲t̲p̲u̲t̲ ̲N̲o̲t̲i̲f̲i̲c̲a̲t̲i̲o̲n̲
Test execution status information is notified on the
operator's VDU.
