top - download
⟦c6d600749⟧ Wang Wps File
Length: 20523 (0x502b)
Types: Wang Wps File
Notes: CPS/230/ICD/001
Names: »0257A «
Derivation
└─⟦e91c96c30⟧ Bits:30006069 8" Wang WCS floppy, CR 0025A
└─ ⟦this⟧ »0257A «
WangText
5…09…5…0e…5
5…06…4…86…1
…02…
…02… …02…
…02…CPS/230/ICD/0001
801017 #
USER PROCEDURES
AND ASSOCIATED
FORMATS
…02……02…CAMPS
2̲1̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲S̲T̲A̲T̲U̲S̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲N̲1̲)̲
This format will be employed by the system to inform
the terminals of the status of messages prepared at
this terminal position using Format A (or O) and comments
prepared using Format G1. Only those lines which are
applicable shall be used in a status message. Format
lines C to I are applicable for messages and format
lines K to M are applicable for comments. Reference
should be made to Figs. 21a and 21b.
A status message shall be transmitted when requested
by format N2 and by the system at an interval (time
elapsed since last report) applicable for terminals
and determined by the supervisor.
21.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)
V1 and V2: The variable fields shall be as described
in Section 2.2 referring to the transaction in course.
21.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲D̲
(V3)(sp)(V4)RELEASED(sp)(T1)(sp)AS(sp)(S)(EOL)
V3 and V4: The values of V1 and V2 of Format A of the
message in question (see Section 2.2).
T1: Time stamp of release. T1 shall be composed as
described in Section 2.2.1.2.
S: The serial number allocated to the released message.
This line shall be repeated for each message released
since the last status message.
21.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲E̲
(V5)(sp)(V6)(sp)AWAITING(sp)RELEASE(EOL)
V5 and V6: The values of V1 and V2 of Format A of each
message prepared at this terminal and with assigned
requests for release (see Section 2.2).
This line shall be repeated for each message awaiting
release.
21.4 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲F̲
(V7)(sp)(V8)(sp)AWAITING(sp)COORDINATION(EOL)
V7 and V8: The values of V1 and V2 of Format A of each
message prepared at this terminal and with assigned
request for coordination (see Section 2.2).
This line shall be repeated for each message awaiting
coodination.
21.5 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲G̲
(V9)(sp)(V10)(sp)IN(sp)ABEYANCE(sp)(X)(EOL)
V9 and V10: The values of V1 and V2 of Format A of
each message prepared at this terminal which is kept
waiting for further processing (see Section 2.2).
X: This shall have one of the following values, as
appropriate:
P = Preparation suspended
N = Not accepted for release
D = Release deferred
This line shall be repeated for each message awaiting
further processing.
21.6 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲H̲
(V11)(sp)(V12)DELETED(T2)(EOL)
V11 and V12: The values of V1 and V2 of Format A of
each message prepared at this terminal and deleted
before release using Format P1. The composition of
V1 and V2 will be as described in Section 2.2
This line shall be repeated for each message deleted
since the last status message.
21.7 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲I̲
(N)(sp)MESSAGES(sp)PREPARED(sp)SINCE(sp)(T3)(EOL)
N: A two-digit number which shall be the number of
messages prepared since the last status report.
T3: The date and time of the previous status message.
T3 shall be composed as described in section 2.2.1.2.
21.8 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲S̲ ̲K̲,̲ ̲L̲,̲ ̲M̲
These lines correspond to the status information for
the comments prepared at this terminal. The values
of the variable components in lines L and M are as
described for format lines G and I respectively except
that they refer to comments prepared using Format G1
and "release does not apply".
21.9 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲J̲ ̲-̲ ̲E̲N̲D̲(̲E̲O̲L̲)̲
The last format line of this format.
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A -(EOL)
B (V1)(sp)(V2)(EOL)
C STATUS(sp)OF(sp)OUTGOING(sp)MESSAGES(EOL)
D (V3)(sp)(V4)(sp)RELEASED(sp)T1)(sp)AS(sp)(S)(EOL)
E (V5)(sp)(V6)(sp)AWATING(sp)RELEASE(EOL)
F (V7)(sp)(V8)(sp)AWAITING(sp)COORDINATION(EOL)
G (V9)(sp)(V10)(sp)IN(sp)ABEYANCE(sp)(X)(EOL)
H (V11)(sp)(V12)(sp)DELETED(sp)(T2)(EOL)
I (N)(sp)MESSAGES(sp)PREPARED(sp)SINCE(sp)(T3)(EOL)
J END(EOL)
K STATUS(sp)OF(sp)COMMENTS
L (V9)(sp)(V10)(sp)IN(sp)ABEYANCE(EOL)
M (N)(sp)COMMENTS(sp)PREPARED(sp)SINCE(sp)T3(EOL)
…01…Fig. 21a…01…FORMAT N1 MESSAGE STATUS FORMAT
A -
B LOCO16 140830Z AUG 80
C STATUS OF OUTGOING MESSAGES
G LOC001 140347Z AUG 80 IN ABEYANCE P
G LOC008 140531Z AUG 80 IN ABEYANCE X
I 00 MESSAGE PREPARED SINCE 140730Z AUG 80
K STATUS OF COMMENTS
M 00 COMMENTS PREPARED SINCE 140730Z AUG 80
J END
FIG. 21b FORMAT N1…01…MESSAGE STATUS FORMAT (EXAMPLE)
2̲2̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲S̲T̲A̲T̲U̲S̲ ̲E̲N̲Q̲U̲I̲R̲Y̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲N̲2̲)̲
This format will be used by the operator to obtain
information with respect to messages prepared at the
terminal since the last periodic message status. The
use of this format causes the status message (Format
N1) to be transmitted to the terminal. Reference should
also be made to Figs. 22a and 22b.
22.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲2̲
sc(cr)(EOL)
The operator enters this line. When the system is in
rest mode with respect to the terminal, it shall respond
by transmitting the version of Format N1 with the status
at the time of enquiry (See Section 21).
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A sm(cr)(EOL)
B (V1)(sp)(V2)(EOL)
C STATUS(sp)OF(sp)OUTGOING(sp)MESSAGES(EOL)
D (V3)(sp)(V4)(sp)RELEASED(sp)(T1)(sp)AS(S)(EOL)
E (V5)(sp)(V6)(sp)AWAITING(sp)RELEASE(EOL)
F (V7)(sp)(V8)(sp)AWAITING(sp)COORDINATION(EOL)
G (V9)(sp)(V10)(sp)IN(sp)ABEYANCE(sp)(X)(EOL)
H (V11)(sp)(V12)(sp)DELETED(sp)(T2)(EOL)
I (N)(sp)MESSAGES(sp)PREPARED(sp)SINCE(sp)(T3)(EOL)
J END(EOL)
K STATUS(sp)(OF)(sp)COMMENTS
L (V9)(sp)(V10)(sp)IN(sp)ABEYANCE(EOL)
M (N)(sp)COMMENTS(sp)(PREPARED)(sp)SINCE(sp)(T3)(EOL)
FIG. 22a FORMAT N2…01…MESSAGE STATUS ENQUIRY
(This format is the same as format N1 with Format line
A replaced by the sequence sm entered by the operator).
FIG. 22b FORMAT N2…01…MESSAGE STATUS ENQUIRY (EXAMPLE)
2̲3̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲M̲E̲R̲G̲E̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲O̲)̲
This format will enable a drafter to merge two messages
already stored in the system to compose a new outgoing
message. The format includes system/operator interaction.
Reference should also be made to Figs. 23a and Fig.
23b.
23.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
mm(cr)(EOL)
The operator enters this line. When the system is in
rest mode with respect to the terminal it shall respond
to the above sequence by conditioning itself to follow
the protocol for message merge embodie in this format.
23.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)
The system shall transmit this format line with variable
fields V1 and V2 as described in section 2.2 and referring
to the transaction in course.
23.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
23.3.1 F̲o̲r̲m̲a̲t̲ ̲L̲i̲n̲e̲ ̲C̲1̲
YOUR(sp)(REF)(sp)(v3)(sp)(v4)(sp)(v5)(sp)(v6)(EOL)
The system shall output the first part of this format
line and await entry of the variables v3, v4, v5, and
v6. The variables are:
v3: is the terminal designator + transaction serial
number described in section 2.2.1.1
v4: is the time stamp described in section 2.2.1.2
v5 and v6: are the two digit line numbers defining
a section of the text part of a message.
Validation check shall be performed by the system for
the variables v3 and v4 (see below). If no line numbers
are specified, then the entire text part of a message
will be subject for merge.
23.3.2 F̲o̲r̲m̲a̲t̲ ̲L̲i̲n̲e̲ ̲C̲2̲
YOUR(sp)(REF)(sp)(v7)(sp)(v8)(sp)(v9)(sp)(v10)(EOL
The system shall output the first part of this format
line and await entry of the variables v7, v8, v9, and
v10. The variables and the system action shall be as
described in section 23.3.1.
Format line C2 is optional and if the entry (cr) is
made, then the new message is built according to the
specification in format line C1.
23.3.3 V̲a̲l̲i̲d̲ ̲e̲n̲t̲r̲y̲
If the reference specified in line C1 or C2 refer to
messages stored in the system and is available for
merging at that preparaion position, then the system
shall build a new message composed in the following
way:
The message header and the extracted section of the
text part of the first referenced message will be concatenated
with the extracted section of the text part of the
second referenced message. After concatenation the
system shall display format line G and I and return
to rest mode. If only one reference has been specified,
then the system shall output format line H instead
of line G.
23.3.4 I̲n̲v̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the entry is not a valid form, the procedure shall
continue with a default sequence transmitted in format
line D and awaiting a new entry. If three successive
invalid entries occur, the system shall transmit format
line E and I and return to rest mode. No further action
shall be taken with respect to the editing procedure
except that an entry shall be made in the system log.
23.3.5 N̲o̲n̲-̲E̲x̲i̲s̲t̲e̲n̲t̲ ̲M̲e̲s̲s̲a̲g̲e̲
If the entry is valid in form, but does not correspond
to a message stored in the central equipment, the procedure
shall continue with the default sequence described
in Section 23.3.4 ,but with format line F1 instead
of format line D. The default log entry shall be required.
23.3.6 N̲o̲t̲ ̲A̲v̲a̲i̲l̲a̲b̲l̲e̲ ̲a̲t̲ ̲t̲h̲i̲s̲ ̲T̲e̲r̲m̲i̲n̲a̲l̲
If the entry is valid, but refers to a message which
has not originated from that terminal position, the
procedure shall continue with format line F2 and format
line I. The system shall return to rest mode with respect
to that terminal and an entry shall be made in the
system log.
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A mm(cr)(EOL)
B (V1)(sp)(V2)(EOL)
C1 YOUR(sp)REF(sp)(v3)(sp)(V4)(sp)(v5)(sp)(v6)(EOL)
C2 YOUR(sp)REF(sp)(v7)(sp)(v8)(sp)(v9)(sp)(v10)(EOL)
D INVALID(sp)-(sp)TRY(sp)AGAIN(EOL)
E CONTACT(sp)SUPERVISOR(EOL)
F1 NON(sp)EXISTENT(EOL)
F2 NOT(sp)PREPARED(sp)FROM(sp)THIS(sp)TERMINAL(EOL)
G MERGE OK
H RETRIEVAL OK
I END(EOL)
FIG 23a FORMAT 0…01…MESSAGE MERGE
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A mm
B LNN030 180519Z JUL 80
C1 YOUR REF LNN005 1213556Z MAY 80 3 15
C2 YOUR REF CEA012 211020Z MAY 80 1 7
G MERGE OK
I END
FIG 23b FORMAT O…01…MESSAGE MERGE (EXAMPLE)
2̲4̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲D̲E̲L̲E̲T̲I̲O̲N̲ ̲R̲E̲Q̲U̲E̲S̲T̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲P̲1̲)̲
This format shall be used to request the system to
delete a message at all stages in the preparation process.
Message submitted for release and messages which have
been released shall not be deleted automatically, but
the request for deletion shall be forwarded to the
supervisor of the system.
The format includes interactive procedures. Reference
should also be made to Fig 24a and 24b.
24.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
dm(cr)(EOL)
When this sequence is enterd from a terminal which
is in a rest mode, the system will respond by transmitting
format line B.
24.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
V1(sp)(V2)(EOL)
The system shall transmit this format line with variable
fields V1 and V2 as described in Section 2.2 referring
to the transaction in course.
24.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
YOUR(sp)REF(sp)(v3)(cr)(EOL)
The system shall output the first part of this format
line and await the entry of v3 by the operator. The
composition of v3 will be as described in Section 2.2.1.1
and is the terminal designator plus the transaction
serial number of the message which the operator wishes
to "delete". The response of the system shall be one
of the following appropriate to the circumstances:
24.3.1 V̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the serial number refers to a message stored in
the system and available for deletion, the procedure
shall continue with format line I.
24.3.2 I̲n̲v̲a̲l̲i̲d̲ ̲E̲n̲t̲r̲y̲
If the entry is not of a valid form, the system shall
continue with a default sequence by transmitting format
line D and awaiting a new entry for v3.
If three successive invalid entries occur, the system
shall transmit format line E and M and return to rest
mode. No further action shall be taken with respect
to the deletion request except that an entry shall
be made in the system log.
24.3.3 N̲o̲n̲-̲E̲x̲i̲s̲t̲e̲n̲t̲ ̲M̲e̲s̲s̲a̲g̲e̲
If the entry is valid in form, but does not correspond
to a message stored in the system, the procedure shall
continue with the default sequence described in section
24.3.2 but with format line F instead of format line
D.
24.3.4 N̲o̲t̲ ̲A̲v̲a̲i̲l̲a̲b̲l̲e̲ ̲f̲o̲r̲ ̲D̲e̲l̲e̲t̲i̲o̲n̲ ̲-̲ ̲A̲w̲a̲i̲t̲i̲n̲g̲ ̲R̲e̲l̲e̲a̲s̲e̲
The system shall not automatically delete a message
after the originator has indicated that he wishes the
messsage to be submitted for release, unless and until
the message has been rejected by the releasing officer.
If the message specified is awaiting release, the system
shall continue with the sequence: format line G, format
line M, send the request for deletion to the supervisor,
and return to rest mode with respect to the terminal.
An entry shall be made in the system log.
24.3.5 M̲e̲s̲s̲a̲g̲e̲ ̲h̲a̲s̲ ̲b̲e̲e̲n̲ ̲R̲e̲l̲e̲a̲s̲e̲d̲
If a message has been released by the releasing officer,
then the system shall not automatically delete the
message but instead send a deletion request to the
supervisor. The supervisor shall take action to delete
the message. The procedure shall follow the sequence:
output format line H and M, send the request for deletion
to the supervisor and return to rest mode with respect
to the terminal. The variable T1 shall be composed
as described in section 2.2.1.2 and shall be the time
of release of the message. An entry shall be made in
the system log.
24.4 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲S̲ ̲I̲,̲ ̲J̲,̲ ̲(̲D̲)̲ ̲a̲n̲d̲ ̲K̲
These format lines constitute the operator interrogation
sequence to ascertain that the request is being made
by an authorised person. The sequence and composition
of each format line shall be as described for format
lines B, C, F, and G of Format I (See Section 14).
The procedure shall be as described for that format
except that when a valid entry is made in format line
J (format line C of Format I), the system shall continue
by transmitting format lines L and M of the present
format. In case of invalid entry a system log entry
is required.
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A dm(cr)(EOL)
B (V1)(sp)(V2)(EOL)
C YOUR(sp)REF(sp)(v3)(cr)(EOL)
D INVALID(sp)-(sp)TRY(sp)AGAIN(EOL)
E CONTACT(sp)SUPERVISOR(EOL)
F NON(sp)EXISTANT(sp)-(sp)TRY(sp)AGAIN(EOL)
G AWAITING(sp)RELEASE(sp)-(sp)DELETION(sp)REQUEST(sp)TO(sp)
SUPERVISOR(EOL)
H RELEASED(sp)(T1)(sp)-(sp)DELETION(sp)REQUEST(sp)SEND(sp)TO(sp)
SUPERVISOR(EOL)
I IDENTIFY(sp)YOURSELF(EOL)
J (x)(cr)(EOL)
K NO(sp)GOOD(sp)-(sp)UNATTENDED(sp)OPERATION(sp)FROM(sp)(T2)(EOL)
L DELETION(sp)REQUEST(sp)ACCEPTED(sp)(T3)(EOL)
M END(EOL)
FIG. 24a FORMAT P1…01…DELETION REQUEST FORMAT
A dm
B CEA032 061345Z JAN 80
C YOUR REF CEA025
I IDENTIFY YOURSELF
J xxxxxxxxxxxxx
L DELETION REQUEST ACCEPTED 061346Z JAN 80
M END
FIG. 24b FORMAT P1…01…DELETION REQUEST FORMAT
2̲5̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲D̲E̲L̲E̲T̲I̲O̲N̲ ̲N̲O̲T̲I̲F̲I̲C̲A̲T̲O̲N̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲P̲2̲)̲
This format shall be used by the system to notify the
drafter and nominated coordinators of a message, of
the deletion of a message (by the supervisor). Reference
should also be made to figs. 25a and 25b.
25.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)
V1 and V2: These are described in Secion 2.2. The values
shall be those applicable to the transaction in course.
25.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲C̲
MSG(sp)(NO)(sp)(V3)(sp)(V4)DELETED(sp)(T1)(EOL)
V3 and V4: V1 and V2 of Format A of the message which
has been deleted. These are described in Section 2.2.
T1: The time stamp of the "time of deletion" of the
message. This shall be composed as described in Section
2.2.1.2
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A -(EOL)
B (V1)(sp)(V2)(EOL)
C MSG(sp)NO(sp)(V3)(sp)(V4)DELETED(sp)(T1)(EOL)
d END(EOL)
Fig. 25a FORMAT P2
DELETION NOTIFICATION FORMAT
A -
B CEA047 061402Z JAN 80
C MSG NO CEA025 061103Z JAN 80 DELETED 061357Z JAN 80
D END
Fig. 25b FORMAT P2
DELETION NOTIFICATION FORMAT
2̲6̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲R̲E̲L̲E̲A̲S̲E̲ ̲S̲T̲A̲T̲U̲S̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲Q̲1̲)̲
This format will be used by the system to inform the
operator of the relase terminal on the status of messages
submitted to, released, deferred or refused at the
position for relase status message. A release status
message shall be transmitted when requested by format
Q2 and by the system at an interval (time elapsed since
last report) applicable for terminals and determined
by the supervisor. Figs. 26a and 26b.
26.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲B̲
(V1)(sp)(V2)(EOL)
V1 and V2: These variable fields shall be as described
in Section 2.2 referring to the transaction in course.
26.2 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲D̲
(V3)(sp)(V4)(sp)RELEASED(sp)AS(sp)(ser)(sp)(NO)(sp)(S)(EOL)…06…1
…02… …02… …02… …02…
The variable fields in this format line are as described
in Section 21.2. This line shall be repeated for each
message released since the last status message.
26.3 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲E̲
(V5)(sp)(V6)(sp)REFUSED(sp)RELEASED(sp)(T2)(EOL)
V3 and V4: The values of V1 and V2 of the corresponding
Format A of each message submitted to the release position
and refused release since the last status message.
T2: The time at which release was refused. This line
shall be repeated for each message which was refused
since the last status message.
26.4 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲F̲
(V7)(sp)(V8)(sp)DEFERRED(sp)(T3)(EOL)
V7 and V8: The values V1 and V2 of the corresponding
Format A of each message submitted to the release which
was deferred.
T3: The time at which release was deferred.
The line shall be repeated for each message which was
deferred since the last status.
26.5 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲G̲
(V9)MESSAGES(sp)asubmitted(sp)SINCE(sp)(T4)(EOL)
V9: The total number of messages submitted since the
last status message.
T4: The time of the last status message.
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A -(EOL)
B (V1)(sp)(V2)(EOL)
C STATUS(sp)OF(sp)MESSAGES(sp)SUMBITTED(sp)FOR(sp)RELEASE(EOL)
D (V3)(sp)(V4)(sp)RELEASED(sp)(T1)(sp)AS(sp)SER(sp)NO(sp(S)(EOL)
E (V5)(sp)(V6)(sp)REFUSED RELEASED(sp)(T2)(EOL)
F (V7)(sp)(V8)(sp)DEFERRED(sp)(T3)(EOL)
G (V9)MESSAGES(sp)SUBMITTED(sp)SINCE(sp)(T4)(EOL)
H END(EOL)
Fig. 26a FORMAT Q1…01…RELEASE STATUS FORMAT
L̲I̲N̲E̲ C̲O̲M̲P̲O̲S̲I̲T̲I̲O̲N̲
A -
B CER210 311210Z APR 80
C STATUS OF MESSAGES SUBMITTED FOR RELEASE
D CEA014 311115Z APR 80 RELEASED 311130Z APR 80 AS SER
NO 207
D CEB023 311123Z APR 80 RELEASED 31135Z APR 80 AS SER
NO 210
E CEA011 311105Z APR 80 REFUSED RELEASE 311117Z APR 80
G END
Fig. 26b FORMAT Q1…01…RELEASE STATUS FORMAT (EXAMPLE)
2̲7̲ ̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲R̲E̲L̲E̲A̲S̲E̲ ̲S̲T̲A̲T̲U̲S̲ ̲E̲N̲Q̲U̲I̲R̲Y̲ ̲(̲F̲O̲R̲M̲A̲T̲ ̲Q̲2̲)̲
This format will be used by the release terminal operator
to obtain a summary report of the status of messages
submitted to him for relase since the last periodic
status report (Format Q1). Reference should also be
made to Figs. 27a and 27b.
27.1 F̲O̲R̲M̲A̲T̲ ̲L̲I̲N̲E̲ ̲A̲
rs(cr)(EOL)
The operator enters this line. When the system is in
rest mode with respect to the terminal, it shall respond
by transmitting the format lines B to H as applicable.
These are identical to those of Format Q1 described
in section 26.
