DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦c80313a4b⟧ Wang Wps File

    Length: 1394 (0x572)
    Types: Wang Wps File
    Notes: Spelunked
    Names: »~ORPHAN22.10«

Derivation

└─⟦17e14ee1a⟧ Bits:30006162 8" Wang WCS floppy, CR 0237A
    └─ ⟦this⟧ »~ORPHAN22.10« 

WangText



3445          The communication  o  If no errors are detected
    with the Standby PU
    is not correct               GO TO step 3450
    and
    the communication 
    with the online PU
    is correct, i.e.
    there isan indica-
    tion of an error in
    the WD, in the Standby
    PU or in the cables
    between the Standby PU
    and the WD.
    Check the actual
    cables.
    Check the LEDs in
    the WD modules.
    (refer to section 4.5)
                          o If an error is detected then
                            correct it orreplace the failing
                            item and
                            then
                                 Verify the WD subsystem
                                 GO TO step 3900.

    * * * * * * * * * * * * * * * * * * * * * * * * * *
    * * * * * *…86…1    …02…         …02…           …02… …02…    …02…  …02…       
                          
3450          * * * * * * * * * * * * * * * * * * * * *
              * * * * * * * * * * *
    *                     N̲O̲T̲E̲                        
                                     *
    *                                                 
               
    *  The standby PU (if any) is taken offline and the
    Maint.    *
    *  Pos. VDU is connected directly to the offline PU.
     (Refer  *
    *  to figure 4.3.3.3-2).                          
               *
    *                                                 
              *
    * * * * * * * * * * * * * * * * * * * * * * * * * *
    * * * * * *


    Enter the command:    o The following output should
                            appear:

    OC D[[[ [ (CR)          07 MAP/BIT: OK
                            DAMOS BOOTLOADER
    on the Maint. Pos.      CPU 
    VDU
                            If correct then it i