top - download
⟦c9e83dd34⟧ Wang Wps File
Length: 5138 (0x1412)
Types: Wang Wps File
Notes: CR/SHAPE MEETING No. 14
Names: »1040A «
Derivation
└─⟦d04a935aa⟧ Bits:30006049 8" Wang WCS floppy, CR 0078A
└─ ⟦this⟧ »1040A «
WangText
…02…
…02…BHB/820204…02……02…#
MINUTES OF MEETING SHAPE/CR No. 14
…02……02…CAMPS
…0e…SHAPE/CR…0f……02……02… …02……0f…82-03-04…02…14 …02…CR…0e…
Minutes of Meeting of the 2. and 3. March 1982.
…0f……0f…ACE COMSEC…0e……0e…
Mr. Bob March Mr. Gert Jensen IJO
F Sgt. John Walker Mr. Bjarne Berthold SRA
Mr. Uffe Holst JRD
Mr. Kurt Mikkelsen CSV
CC: SHAPE Mr. Michael Hansen FE
JHO
A̲G̲E̲N̲D̲A̲
1. Presentation of CAMPS H/W Units.
2. Presentation of Test Site for the
In-Plant Comsec Test.
3. Review of CPS/TSS/002:
In-plant COMSEC VERIFICATION SPECIFICATION.
4. Equipment for test set-up for In-plant
COMSEC VERIFICATION.
- Identification
- Responsibility and schedule for
delivery.
5. Discussion of comments/notes on CWR/ATBB
as received by CR.
------------------------------------------------
A̲C̲T̲I̲O̲N̲
1. The CAMPS H/W in integration and test
at the Integration Area was inspected.
2. The Test Site location was inspected.
Existing cables was identified.
2 drawings were handed out to ACE COMSEC
showing the Test site location and the
general cable installation (Power, phone,
light).
The proposed cable routing for power and
signal cables was identified.
The positioning of the units included
in the test set-up was determined based
on CPS/TCN/039.
CR/KM This document needs update to include
additional units. (See encl. ES 3-445).
3. I̲N̲ ̲P̲L̲A̲N̲T̲ ̲C̲O̲M̲S̲E̲C̲ ̲V̲E̲R̲I̲F̲I̲C̲A̲T̲I̲O̲N̲ ̲S̲P̲E̲C̲.̲,̲ ̲D̲O̲C̲.̲
̲C̲P̲S̲/̲T̲S̲S̲/̲0̲0̲2̲.̲
3.1 The document was reviewed. DN's and comments
was identified and incorporated.
The Updated document (issue 1) was accepted
by ACE COMSEC.
CR/URH CR will forward the document to SHAPE
for formal registration and approval.
3.2 Two documents, which are applicable for
CPS/TSS/002, were handed out to ACE COMSEC
FOR INFO:
a) CPS/TCN/039: COMSEC
TEST
SYSTEM
FACILITY
LAYOUT.
b) CPS/TCN/040: CAMPS
INSTALLATION
MATERIAL.
4. S̲C̲H̲E̲D̲U̲L̲E̲ ̲A̲N̲D̲ ̲D̲E̲L̲I̲V̲E̲R̲A̲B̲L̲E̲S̲
4.1 S̲c̲h̲e̲d̲u̲l̲e̲
CR informed of the following schedule
for the In-Plant Comsec Verification.:
820315: Start: Installation
of
Equipment.
820601: Start formal verification. This
is based on:
a) DSMT H/W Test accomplished
820501.
b) Integration and Dry run
of H/W-system as baselined
by a) above within 1 month.
4.2 E̲q̲u̲i̲p̲m̲e̲n̲t̲
Below is listed the equipment to be supplied
by SHAPE/ACE COMSEC FOR THE Test Set-up.
The appended drawing ES 3-445 is updated
to include this equipment.
a) To permit testing of Low-speed line
(TRC, P-to-P) the following equipment
shall be used:
2 BID 610 (200W each)
2 BID 1000 (150W each)
CR will provide power for this equipment.
CR will also provide a 2 inch. steel
pipe from rack F to table with PTP/PTR.
The pipe will contain the following
cables:
2 cables to 2 BID 1000
1 cable to PTP/PTR
2 cables to 4L lines
SHAPE/ b) SHAPE will provide 4 PLF for 3
phases + neutral
ACE as soon as possible or prior to april
1, 1982.
COMSEC The filters must be rated for
a working current
Confirm of 40 A.
rating
prior to
820315
P̲o̲w̲e̲r̲ ̲c̲o̲n̲s̲u̲m̲p̲t̲i̲o̲n̲:̲ ̲I̲n̲ ̲t̲h̲e̲ ̲f̲a̲c̲i̲l̲i̲t̲y̲
CAMPS equipment 12 KW
FIKS equipment 6 KW
Other equipment ̲5̲ ̲K̲W̲
23 KW
35A/phase.
c) D̲e̲l̲i̲v̲e̲r̲y̲ ̲o̲f̲ ̲e̲q̲u̲i̲p̲m̲e̲n̲t̲:̲ ̲B̲y̲ ̲C̲O̲M̲S̲E̲C̲
c1) Prior to 1. april:
4 Power Line Filters (40A)
5 X 20 metres metallic cables
for BID 1000, PTP/PTR, Low
Speed Terminals.
1 Teleprinter with 4L I/F.
c2) Prior to 1. june
2 BID 610 + ancilliertes
(racks + cables + ITL's
+ T & M Panels).
1 Modem rack for 2 modems
1 Crypto rack for 2 BID
1000.
c3) 2 BID 1000 is already at
CR (used in FAT of CRT).
CR will install the PLF and the metallic
cables - COMSEC will install the delivered
equipment and terminate the cables
except at the PTP/PTR.
T̲E̲S̲T̲ ̲S̲E̲T̲ ̲U̲P̲ ̲B̲Y̲ ̲C̲O̲M̲S̲E̲C̲
5. M̲E̲T̲A̲L̲L̲I̲C̲ ̲C̲A̲B̲L̲E̲S̲
a) Cable size (refer to CAMPS Log 506).
CR informed that a max. of 25 cables
with a diameter of 9 mm could be pulled
through the 2 1/2 inch. port of the
filterbox.
Two ports are used:
One for 25 LSM cables
One for 6 - 10 medium speed cables.
COMSEC does not see any problems in
above and will return with comments
to Log 506.
b) COMSEC confirmed that metallic signal
cables are to be run in ferrous duct
within the CAMPS room as specified
in CPS/TCN/023.
COMSEC will clarify CAMPS Log 503.
Encl.: drw.: ES 3-444 (updated)
CPS/TCN/039
CPS/TCN/040
