top - download
⟦d8a3de0a0⟧ Wang Wps File
Length: 13286 (0x33e6)
Types: Wang Wps File
Notes: BURMA - AMSS, PART III
Names: »4396A «
Derivation
└─⟦61f87be83⟧ Bits:30006024 8" Wang WCS floppy, CR 0420A
└─ ⟦this⟧ »4396A «
WangText
BURMA
AMSS -
PART III
SYS/83-12-07
COST PROPOSAL
Page
BURMA AMSS
AUTOMATIC MESSAGE SWITCHING SYSTEM
DOC. NO. B-AMSS/8020/PRP/001 ISSUE 1
PART III
COST PROPOSAL
SUBMITTED TO: INTERNATIONAL CIVIL AVIATION ORGANIZATION
1000 SHERBROOKE STREET WEST, SUITE
400
MONTREAL, QUEBEC H3A 3R2
CANADA
IN RESPONSE TO: ST-1955
PREPARED BY: CHRISTIAN ROVSING A/S
SYSTEMS DIVISION
LAUTRUPVANG 2
2750 BALLERUP
DENMARK
PRINCIPLE CONTACT: Gert Jensen, Systems Division
Manager
Telex Denmark 35111 cr dk
Telephone: 02 65 11 44
…0e…c…0f… Christian Rovsing A/S - 1983
This document contains information proprietary to Christian
Rovsing A/S. The information, whether in the form of
text, schematics, tables, drawings or illustrations,
must not be duplicated or used for purposes other than
evaluation, or disclosed outside the recipient company
or organisation without the prior, written permission
of Christian Rovsing A/S.
This restriction does not limit the recipient's right
to use information contained in the document if such
information is received from another source without
restriction, provided such source is not in breach
of an obligation of confidentiality towards Christian
Rovsing A/S.
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
Page
1 PRICE PROPOSAL ................................
3
1.1 PRICING PRINCIPLES AND SUMMARY ............
3
1.1.1 Principles of the Price Proposal .......
3
1.1.2 Price ..................................
4
1.1.3 Price Summary on "Tender Form" .........
4
1.2 BIDDING PROVISIONS .........................
8
1.2.1 General ................................
8
1.2.2 Specifications .........................
8
1.2.3 Patent Rights ..........................
8
1.2.4 Government Restrictions ................
8
1.2.5 Taxes and Duties .......................
9
1.2.6 Payments ...............................
9
1.2.7 Validity ...............................
9
1.2.8 Compliance Sheets ......................
9
1.3 HARDWARE EQUIPMENT MATRIX ..................
22
APPENDIX A .......................................
24
1̲ ̲ ̲P̲R̲I̲C̲E̲ ̲P̲R̲O̲P̲O̲S̲A̲L̲
I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲
This volume presents a fixed price proposal for the
equipment and services specified in the Christian Rovsing
A/S supplied:
BURMA - AMSS
Proposal
Part I: Management Proposal
Part II: Technical Proposal
The price proposal consists of the following sections:
Section 1 provides a description of the principles
of the price proposal and a price summary
Section 2 provides the bidding provisions; this includes
all compliance sheets
Section 3 provides a price breakdown as required
by the tender statement.
Section 4 provides the hardware equipment matrix.
1.1 P̲R̲I̲C̲I̲N̲G̲ ̲P̲R̲I̲N̲C̲I̲P̲L̲E̲S̲ ̲A̲N̲D̲ ̲S̲U̲M̲M̲A̲R̲Y̲
1.1.1 P̲r̲i̲n̲c̲i̲p̲l̲e̲s̲ ̲o̲f̲ ̲t̲h̲e̲ ̲P̲r̲i̲c̲e̲ ̲P̲r̲o̲p̲o̲s̲a̲l̲
The Price proposal has been based on a work breakdown
structure. The Work Breakdown Structure is created
by dividing all aspects of the project into major tasks.
For each of the major tasks a further breakdown is
generated detailing for instance hardware, software,
and support tasks.
The WBS consists, therefore, of a family tree of tasks
organized to define and display the work to be accomplished
for successful implementation of a project.
The cost of the tasks at the lowest level has been
estimated based on manpower-estimates and cost-estimates.
By adding the costs of the tasks at a certain level
in the WBS, the cost at a higher level in the WBS has
been found.
The price of a certain element in the WBS, therefore,
reflects the cost to complete the task.
1.1.2 P̲r̲i̲c̲e̲
The firm fixed price is:
Dkr. 14,840,246
===============
1.1.3 P̲r̲i̲c̲e̲ ̲S̲u̲m̲m̲a̲r̲y̲ ̲o̲n̲ ̲"̲T̲e̲n̲d̲e̲r̲ ̲F̲o̲r̲m̲"̲
The price breakdown on the requested tender form is
given below.
1.2 B̲I̲D̲D̲I̲N̲G̲ ̲P̲R̲O̲V̲I̲S̲I̲O̲N̲S̲
1.2.1 G̲e̲n̲e̲r̲a̲l̲
This proposal reflects the suggested solution by Christian
Rovsing A/S in achieving the request from ICAO. However,
Christian Rovsing A/S is willing to discuss any change
in the proposal that ICAO may wish. Such changes shall
be reflected in the price submitted for this project.
1.2.2 S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲s̲
Christian Rovsing A/S assumes that the contract negotiated
between ICAO and Christian Rovsing A/S will define
the scope of work to be performed under the contract
and refer to a statement of work to be appended to
the contract and to form an integral part of the contract.
Christian Rovsing A/S further assumes that the initial
phase of the contractual work will be directed at drafting
a System Requirements Specification, SRS, to exhaustively
define all functional requirements of the system. Once
completed, the SRS will be submitted to ICAO for approval
- or otherwise - and signature. The agreed and signed
SRS will at this stage replace the statement of work
and supersede the RFP and this present proposal.
1.2.3 P̲a̲t̲e̲n̲t̲ ̲R̲i̲g̲h̲t̲s̲
All patent and intellectual proprietary rights to equipment
developed and built for the project remain the exclusive
property of Christian Rovsing A/S or its suppliers.
1.2.4 G̲o̲v̲e̲r̲n̲m̲e̲n̲t̲ ̲R̲e̲s̲t̲r̲i̲c̲t̲i̲o̲n̲s̲
The proposal is prepared taking into consideration
only the legislation in force as of today. In case
of legislation affecting this project or in case government
restrictions are imposed on Christian Rovsing A/S after
this date, the proposal shall be adjusted accordingly.
1.2.5 T̲a̲x̲e̲s̲ ̲a̲n̲d̲ ̲D̲u̲t̲i̲e̲s̲
All prices are quoted without any taxes and duties.
1.2.6 P̲a̲y̲m̲e̲n̲t̲s̲
Christian Rovsing A/S assume, in the price proposal
submitted, a 100% payment 30 days after final acceptance.
A reduction in the total price can be effected if a
cash downpayment at contract signature is offered.
The final terms of the downpayment and subsequent reduction
are to be negotiated.
1.2.7 V̲a̲l̲i̲d̲i̲t̲y̲
This offer is valid until 15 March 1984.
1.2.8 C̲o̲m̲p̲l̲i̲a̲n̲c̲e̲ ̲S̲h̲e̲e̲t̲s̲
1.3 H̲A̲R̲D̲W̲A̲R̲E̲ ̲E̲Q̲U̲I̲P̲M̲E̲N̲T̲ ̲M̲A̲T̲R̲I̲X̲
The hardware equipment matrixes for the Burma - AMSS
are shown in the following tables. The first table
is figure 1.3-1 describes the hardware of the single
system, and the second (figure 1.4-2) describes the
hardware of the optional dual system. For each item
the quantities and the unit prices.
Figure 1.3-1
Hardware Equipment Matrix for Single System
Figure 1.3-2
Hardware Equipment Matrix for Dual System
A̲P̲P̲E̲N̲D̲I̲X̲ ̲A̲
T̲O̲O̲L̲S̲ ̲A̲N̲D̲ ̲T̲E̲S̲T̲ ̲E̲Q̲U̲I̲P̲M̲E̲N̲T̲
1 I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲
This section contains a list of tools and test equipment
necessary for maintenance at a total price of Dkr.
286,080..
2 S̲T̲A̲N̲D̲A̲R̲D̲ ̲T̲O̲O̲L̲S̲
Table 2-1 lists one set of standard multipurpose tools
with suitcase.
S̲T̲A̲N̲D̲A̲R̲D̲ ̲T̲O̲O̲L̲S̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Line Nomenclature Manufacturer Type
No.
No.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1 Screwdriver, Plainhead Weralit 435-0,4-50
2 Screwdriver, Plainhead Weralit 435-0,5-80
3 Screwdriver, Plainhead Weralit 435-0,6-120
4 Screwdriver, Plainhead Weralit 435-0,8-200
5 Screwdriver, Plainhead Weralit 434-1,0-125
6 Screwdriver, Plainhead Weralit 434-1,0-250
7 Screwdriver, Plainhead Weralit 434-1,2-175
8 Screwdriver, Plainhead Weralit 434-1,6-200
9 Screwdriver, Stubby Xcelite S 141
10 Screwdriver, Watchmaker-set Erem TS-6N
11 Screwdriver, Philips Weralit 350PR-0-60
12 Screwdriver, Philips Weralit 1-80
13 Screwdriver, Philips Weralit 2-100
14 Screwdriver, Philips Weralit 2-300
15 Screwdriver, Philips Weralit 2-150
16 Screwdriver, Philips Weralit 4-200
17 Screwdriver, Stubby Xcelite SX 102
18 Screwdriver, Voltage Tester Weralit 2253-3-40
19 Wrench, Metric Belzer 1953
M-5x10
20 Wrench, Metric Belzer 1953
M-6x7
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Line Nomenclature Manufacturer Type No.
No.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
21 Wrench, Metric Belzer 1953M-8x9
22 Wrench, Metric Belzer 1953M-10x11
23 Wrench, Metric Belzer 1953M-12x13
24 Wrench, Metric Belzer 1953M-14x15
25 Wrench, Metric Belzer 1931N-M-4,5x5,5
26 Wrench, Inches Belzer 1953Z-1/4x5/16"
27 Wrench, Inches Belzer 1953Z-3/8x7/16"
28 Wrench, Inches Belzer 1/2 x 9/16"
29 Wrench, Adjustable Bacho 4"
30 Wrench, Adjustable Bacho 6"
31 Wrench, Adjustable Bacho 8"
32 Wrench, Adjustable Bacho 10"
33 Socket Wrench Set 4-14 Tecos
34 Socket Wrench Set 3/16-9/16" Tecos
35 Side Cutter Erem 84E
36 Side Cutter Erem 196-6"
37 Side Cutter Belzer 2678
38 Pair of Pliers, Flat Nose Erem 124
39 Pair of Pliers, Point Nose Erem 41
40 Pair of Pliers, Bent Nose Belzer 2477G
41 Pair of Pliers, "Polygrip" Belzer 2615M
42 Pair of Pliers, "Polygrip" Belzer 2624B
43 Pipe Wrench, 3", 45…0e…o…0f… Nose Dowidat 176
44 Wire Stripper Belzer 3418B
45 Pair of Tweezers Erop 24
46 Pair of Tweezers Erop 21S/200
47 Steel Scissors Erop 24
48 Unbraco Keys, Set 2-8 mm Weralit 950/7-SM
49 Unbraco Keys, Set 2/64-1/4" Weralit 950/7-SZ
50 Hammer, SUPERFLEX Head Belzer 3625-27
51 Solderiron with transformer Weller TCP-24V,7
52 Solderpoint Weller PT-6
53 Solder Weller 60-40
54 Desoldering pump Erem PS 200
A
55 Electric Torch (Flashlight) Pencil
56 Wrapwire Metric 10-51
57 Suitcase f/hand tools TC TC100 MT
58 Double lid f/suitcase TC A 5-12
room
59 Double lid f/suitcase TC A - 18
room
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
One vacuumcleaner with a soft rubber mouthpiece is
required at each main site for preventive maintenance.
Table 2-1
3 S̲T̲A̲N̲D̲A̲R̲D̲ ̲T̲E̲S̲T̲ ̲E̲Q̲U̲I̲P̲M̲E̲N̲T̲
Table 3-1 lists the standard test equipment required
during performing maintenance at site.
All measure and monitoring devices comply with the
stability and accuracy demanded throughout the system.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Line Nomenclature Manufacturer Type No. QTY
No.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1 Recording Thermometer/
Hygrometer Struers 1
2 Data Communications Tester Tektronix 834 1
3 Multimeter Fluke 8020 A 2
4 Oscilloscope Tektronix 465 B 1
5 Test Set 921-T NU DATA 921-T 1
6 Optical Multimeter PHONODYNE Model 11
XE 1
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Table 3-1
4…02…S̲P̲E̲C̲I̲A̲L̲ ̲T̲O̲O̲L̲S̲ ̲A̲N̲D̲ ̲T̲E̲S̲T̲ ̲E̲Q̲U̲I̲P̲M̲E̲N̲T̲
Table 4-1 lists special tools and test equipment required
during performing maintenance at site.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
Line Nomenclature Manufacturer Type No. QTY
No.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
1 V24 Monitor Module CR CR8011/---/--
2
2 Extender Board CR CR8059M/010/--
1
3 Extender Board CR CR8057M/010/--
1
4 Extender Board CR CR80107/010/--
1
5 V24 Loopback Adaptor CR CR82XXX/---/--
1
6 LTU Loopback Adaptor CR TBD
7 LIA-N Loopback Adaptor CR CR82XXX/---/--
1
8 Tool Scale Spring CDC 000 12210797
1
9 SCR-DR TOPRQUE 2/35" CDC 000 12218425
1
10 Extender Card CDC 000 54109701
1
11 Alignm.Carr.Spindle CDC 000 75018400
1
12 Head Adjustment CDC 000 75018803
1
13 SCR-DR TRQ Hex Bit CDC 000 87016701
1
14 Adp. Speed Sensor CDC 000 87052600
1
15 Extractor Module CDC 000 87399200
1
16 Disk Pack, CE80 MB CDC 000 70438700
1
17 Disk Pack, Data 80 CDC 000 70438000
1
18 Dust Remover, Spray CDC 000 95047800
1
19 Field Test Unit CDC 9967
1
Table 4-1
