top - download
⟦d95683b42⟧ Wang Wps File
Length: 5149 (0x141d)
Types: Wang Wps File
Notes: CPS/ECP/022
Names: »2053A «
Derivation
└─⟦83672169b⟧ Bits:30006105 8" Wang WCS floppy, CR 0165A
└─ ⟦this⟧ »2053A «
WangText
…00……00……00……00……00……86…1 …02… …02… …02…
…02…CPS/ECP/022
…02…SRA/820421…02……02…#
CHANGE OF LTUX-S FIRMWARE TYPES
…02……02…CAMPS
To: GJ, KNN, BHB, MBJ, CGR, HKI, KPL, SL
From: SRA
Subject: L̲T̲U̲X̲-̲S̲ ̲r̲e̲l̲e̲a̲s̲e̲ ̲1̲ ̲f̲i̲r̲m̲w̲a̲r̲e̲ ̲f̲o̲r̲ ̲t̲h̲e̲ ̲D̲S̲M̲T̲
̲H̲/̲W̲ A̲C̲C̲E̲P̲T̲A̲N̲C̲E̲ ̲T̲E̲S̲T̲.̲
Ref.: Meeting 820420, participants: KNN, KPL,
HKI, SL, SRA, CGR
On the referenced meeting following was aggreed:
1) Upon power up the LTUX-S opens LOG. channels 2-5
towards either Host no. 1 or Host no. 2. The Host
no. to be used is set on the user switch on the
LTUX-S. This switch consists of 4 single switches
of which only switch 1 is used. The switch is read
from I/O address #E0 with switch 1 reflected in
databit 3. Host no. 1 shall be selected if this
bit equals …08…0…08… and no. 2 is selected if the bit equals
…08…1…08….
2) The LTUX-S shall act completely transparrent to
data transmitted from CR80 to a connected terminal.
LDU headers shall be stripped from the raw data.
3) When receiving from a connected terminal the LTUX-S
shall consider a DC3 (#13) character as the terminating
character. The DC3 shall not be transmitted towards
CR80. The LTUX-S shall insert the correct LDU headers.
4) The present design with 32 bytes buffers on the
LTUX-S is maintained.
5) The present V24 driver design with …08…NULL…08… characters
transmitted is maintained since the …08…NULL…08… characters
will not affect the VDU or MSP.
1 I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲
It is proposed to establish a new baseline for LTUX-S
firmware types:
BASELINE 1 2 3
PROPOSAL SDS/RSPL NEW PROPOSED
811215
----------------------------------------------------
OPTO L/L- OPTO L/L- OPTO L/L-
I/F I/F I/F I/F I/F I/F
VDU Type Type Type
1 1 1
MSP Type Type Type
1 1 2
PTP/R Type Type Type
1 1 2
LSM Type Type Type
2 2 2
OCR Type Type Type
3 3 3
----------------------------------------------------
References: CPS/007/PRO/0002, II, 2,C (PROPOSAL)
CPS/SDS/001, issue 1.2
SHAPE TELEX, CAMPS LOG NO. 264
PMOM NO. 9, sect. 40
1.1 E̲Q̲U̲I̲P̲M̲E̲N̲T̲ ̲M̲A̲T̲R̲I̲X̲ ̲C̲H̲A̲N̲G̲E̲S̲
When the firmware baseline is changed, the equipment
matrix needs to be updated according to the combined
connectivity tables for MAIN CAMPS and CAMPS REMOTE
TERMINALS.
The following principles are applied:
a) VDU and MSP channels are not supported from the
same LTUX-S.
b) Connected capacity is unchanged
c) Equipped capacity is not decreased
d) If the equipped capacity is increased, the wired
capacity is decreased accordingly.
2 P̲R̲I̲C̲E̲ ̲Q̲U̲O̲T̲A̲T̲I̲O̲N̲
The ECP 22 is a non cost ECP.
2.1 O̲V̲E̲R̲A̲L̲L̲ ̲R̲E̲Q̲U̲I̲R̲E̲M̲E̲N̲T̲
Not applicable.
2.2 S̲I̲T̲E̲ ̲R̲E̲L̲A̲T̲E̲D̲ ̲C̲O̲S̲T̲S̲
Not applicable.
2.3 C̲U̲R̲R̲E̲N̲T̲ ̲B̲A̲S̲E̲L̲I̲N̲E̲ ̲C̲O̲S̲T̲
Not applicable.
3 S̲C̲H̲E̲D̲U̲L̲E̲ ̲I̲M̲P̲A̲C̲T̲
If the ECP is accepted prior to 820510, no schedule
impact is expected.
4 B̲I̲D̲D̲I̲N̲G̲ ̲P̲R̲O̲V̲I̲S̲I̲O̲N̲S̲
Not applicable (non cost ECP).
4.1 V̲A̲L̲I̲D̲I̲T̲Y̲
Not applicable.
4.2 D̲E̲L̲I̲V̲E̲R̲Y̲
The changed firmware will be included in the LTUX-Ss
and delivered with each Main Site Equipment.
4.3 A̲C̲C̲E̲P̲T̲A̲N̲C̲E̲ ̲C̲R̲I̲T̲E̲R̲I̲A̲
Will be included in Main CAMPS acceptance as described
in CAMPS SRS, CPS/210/SYS/0001 and CAMPS ACCEPTANCE
PLAN, CPS/PLN/012.
4.4 T̲Y̲P̲E̲ ̲O̲F̲ ̲P̲R̲O̲P̲O̲S̲A̲L̲
Non cost ECP.
4.5 P̲A̲Y̲M̲E̲N̲T̲ ̲P̲L̲A̲N̲
Not applicable.
4.6 P̲R̲O̲T̲E̲C̲T̲I̲O̲N̲ ̲A̲G̲A̲I̲N̲S̲T̲ ̲C̲U̲R̲R̲E̲N̲C̲Y̲ ̲F̲L̲U̲C̲T̲U̲A̲T̲I̲O̲N̲
Not applicable.
5 E̲N̲G̲I̲N̲E̲E̲R̲I̲N̲G̲ ̲C̲H̲A̲N̲G̲E̲ ̲D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲
Refer to section 1 for general description of the proposed
change.
Appendix A gives a few examples of changes in the connectivity
matrix (CPS/SDS/001).
A̲P̲P̲E̲N̲D̲I̲X̲ ̲A̲
SITE 2 BALTAP (ONE REMOTE STATION)
OLD BASELINE, LTUX-S FIRMWARE
SITE 2 BALTAP (ONE REMOTE STATION)
NEW BASELINE, LTUX-S FIRMWARE
SITE 5 BOERFINK (TWO REMOTE STATIONS)
OLD BASELINE, LTUX-S FIRMWARE
SITE 5 BOERFINK (TWO REMOTE STATIONS)
NEW BASELINE, LTUX-S FIRMWARE
SITE 8 KOLSAAS (ONE REMOTE STATION)
OLD BASELINE, LTUX-S FIRMWARE
SITE 8 KOLSAAS (ONE REMOTE STATION)
NEW BASELINE, LTUX-S FIRMWARE
