top - download
⟦de0a3b7e2⟧ Wang Wps File
Length: 33341 (0x823d)
Types: Wang Wps File
Notes: FIX/0100/MAN/0004
Names: »3931A «
Derivation
└─⟦4d5d1ede7⟧ Bits:30006147 8" Wang WCS floppy, CR 0342A
└─ ⟦this⟧ »3931A «
WangText
…00……00……00……00……00…4…02……00……00…4
3…08…3…0c…+ …1a……08……1a……09……1a……0e……1a…
…19……08……19……09……19……02……18……08……18……0d……18……00……18……01……18… …18……05……17……08……17……0c……17……0d……17…
…17… …16……08……16……09……16……0a……16……0b……16……0c……16……0d……16……0f……16……00……16……02……16…
…16……05……16……06……15……08……15……09……15……0a……86…1 …02… …02… …02…
3931A…02…FIX/0100/MAN/0004
…02…JJJ/880906…02……02…#
FIKS DATA I/F REFERENCE
…02…APE/830815…02……02…FIKS
9 F̲I̲K̲S̲ ̲S̲Y̲S̲T̲E̲M̲ ̲E̲V̲E̲N̲T̲S̲ ̲A̲N̲D̲ ̲C̲O̲U̲N̲T̲E̲R̲S̲
9.1 S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲ ̲f̲r̲o̲m̲ ̲S̲u̲b̲s̲y̲s̲t̲e̲m̲s̲
S̲C̲C̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
N̲I̲C̲S̲/̲T̲A̲R̲E̲ ̲M̲e̲s̲s̲a̲g̲e̲ ̲F̲l̲o̲w̲
- number of incoming messages (from NICS)
per precedence per hour.
- number of outgoing message (to NICS)
per precendence per hour.
A̲C̲P̲ ̲F̲o̲r̲m̲a̲t̲ ̲C̲o̲n̲v̲e̲r̲s̲i̲o̲n̲s̲
- average messgae delay to and from NICS/TARE,
i.e. DTG of oldest message in NT anc DQ queue
- number of messages converted from ACP to SMF
per precedence per classification per hour
- number of messages converted from SMF to ACP
per precedence per classification per hour
- number of errors on coversion from SMF to ACP
per precedence per classification per hour
M̲E̲D̲E̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
S̲e̲c̲u̲r̲i̲t̲y̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
- message released/MEDE,
i.e. class/precedence/No. of messages/No. of
ANO's/total No. of characters
- messages received (from the trunk's),
i.e. class/precedence/No. of messages/total
No. of characters
- number of security profile updates (changed/added/deleted)
per hour, marked with the supervisor-id.
- The DTG of the oldest message in the HDB per
MEDE per hour
- Print queue lengths in the MEDE's per precedence
per MEDE
- DTG of oldest message in print queue per precedence
per MEDE
- No. of mutilated messages per precedence per
MEDE.
* The statistics are not collected at the
MEDE. Instead the correspondig reports
sent to the SCC are stored in the SCC statistics
file, where a statistics program later
(off-line) may generate the sttistics.
N̲o̲d̲e̲/̲T̲r̲u̲n̲k̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
M̲e̲s̲s̲a̲g̲e̲ ̲F̲l̲o̲w̲
- number of frames retrnsmitted per trunk per
hour
- trunk message load in characters per hour
- trunk queue length per precedence per hour
- the DTG of the oldest message in trunk queue
per precedence per MEDE.
M̲a̲i̲n̲t̲e̲n̲a̲n̲c̲e̲
- number of "availability/non availability of
trunkd" per trunk per hour
S̲e̲c̲u̲r̲i̲t̲y̲
- crypto failures, detected by LTUX per hour
10 M̲E̲S̲S̲A̲G̲E̲ ̲F̲O̲R̲M̲A̲T̲S̲
10.1 N̲a̲r̲r̲a̲t̲i̲v̲e̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲
Narrative Messages are defined as the set of messages
prepared at a message handling termial using the long
or the short preparation procedure.
A narrative message cosists of two parts. The signal
is the visible part as printed at an addressee terminel.
The binary information is used to route the message
to remote Nodes and to control distribution on basis
of address numbers at MEDEs.
The visible part (what the terminal operator sees as
the signal) consists of a signal header and a signal
text. Both parts have variable length. The visible
part is stored and transmitted in ASCII.
The signal header gives information about precedence,
origination DTG, message id, it identifies the originator
and other addressees to an addressee. The signal header
has a length of at least 150 bytes and a typical length
of 300 bytes.
The signal text is the information, the originator
wants to transmit to the addressees. This icludes the
classifiction of the information and optionally Subject
Indicator Codes.
The signal text has a minimum length equal to the length
of the classification information and a maximum length
only restricted by the limittions for size of a narrative
message.
The binary information consists of a fixed formatted
part in front of the signal called the binary header
and a variable formatted part following the signal
called the address list. The binary information is
as the name indicates binary and direct computer accessible.
The binary header holds information concernig classificiation,
special category, action and info precedence, release
time and a routing mask. It has further referenceies
to Message ID, SICs and the address list to facilitate
fast access to these quantities.
The address list consists of coded address numbers
and AIGs for originator and destination addressees.
There is a one to one correspondance to the signal
header so an identification of an addressee in the
address list has an easy reference to the address text
in the signal. The total length of a narrative message
is at the most 12000 bytes.
In Figure 10.1 the message format concept is outlined
as it is seen when it is held on disk or transmitted
across the network.
If a message is retransmitted (by use of RTM) then
a new Address list will be added to the original FIKS-message,
containing the addressees of the retransmitted message.
The old address list offset will be saved in the message
for use when processing the text part (Print of the
message etc.).
Figure 10.1…01…Message Format
10.1.1 B̲i̲n̲a̲r̲y̲ ̲H̲e̲a̲d̲e̲r̲
The layout of the Binary Header is shown in Figure
10.1.1.
In the following all the fields contained in the Binary
Header are defined. The numbers refer to Figure 10.1.1.
1) Reserved for NSS (6 bits).
- Used by the FIKS network software (NSS-process).
2) Node to node serial number (10 bits).
- Used by the FIKS network software for message
control.
3) Action Procedure (1 byte).
- Message priority for "TO"-addresses.
Transmission through the network is performed
with this priority.
C̲o̲d̲e V̲a̲l̲u̲e̲ P̲l̲a̲i̲n̲ ̲l̲a̲n̲g̲u̲a̲g̲e̲
R 6 Routine
M 5 Quick
P 4 Priority
O 3 Immediate
Y 2 Rush
Z 1 Flash
4) Type (2 bites).
- Equal 0 (narrative message)
5) Reserved for NSS (6 bits).
- Used by the FIKS network software (NSS-process).
6) Orbit Count (6 bits).
- Counter for controlling "Orbiting Messages".
7) Routing Mask (26 bits).
- If a bit is sat in the Routing Mask, the
message is routed towards the corresponding
Node (MEDE/SCC/NATO).
8) Message length (1 word).
- Length in bytes of Binary Header + Signal +
Address List.
9) Special Category (1 byte)
- Code used at "Special Handling".
C̲o̲d̲e̲ V̲a̲l̲u̲e̲ P̲l̲a̲i̲n̲ ̲l̲a̲n̲g̲u̲a̲g̲e̲
- 0 No special handling
ATOM 1 ATOMAL
CRYS 2 CRYPTO
EXCL 3 EXCLUSIVE
10) Classification Code (1 byte).
- The security classification of the message
C̲o̲d̲e̲ V̲a̲l̲u̲e̲ P̲l̲a̲i̲n̲ ̲l̲a̲n̲g̲u̲a̲g̲e̲
UKL 0 UKLASSIFICERET
INCL 1 UNCLASSIFIED
NU 2 NATO UNCLASSIFIED
TTJ 3 TIL TJENESTEBRUG
REST 4 RESTRICTED
NR 5 NATO RESTRICTED
FTR 6 FORTROLIGT
CONF 7 CONFIDENTIAL
NC 8 NATO CONFIDENTIAL
HEM 9 HEMMELIGT
SECR 10 SECRET
NS 11 NATO SECRET
YHM 12 YDERST HEMMELIGT
TSEC 13 TOP SECRET
CTS 14 COSMIC TOP SECRET
11) Address List Offset (1 word).
- Length in bytes of Binary Header + Signal (I.e
Message Length - length of the Address List).
12) Info Procedure (1 byte).
- Message priority for "INFO"-addressed. Code/Values,
see 3).
13) Readdress Mark (1 bit).
- If sat the message has been readdressed.
14) Spares (7 bits).
15) Signal Header Length (1 word).
- Length in bytes of the Signal Header, ref. sec.
10.1.2.
16) Release Time (1 double word).
- Units in seconds from 1 January 1980 On…0e…0̲0̲…0f… until
the message was released for distribution.
17) Message-ID Reference (1 word).
- The number of bytes counted from the first byte
in the signal header to and including the byte
before the MSG-ID (the byte before the MEDE-ID
in MSG-ID), refer to sec. 10.1.2.
18) SIC-reference (1 word).
- The number of bytes counted from the first byte
in the binary header to start of "SIC-line".
ST-character is not included, refer to sec.
10.1.2. If no SICs present the value is zero.
19) Retransmission Mark (1 bit).
- If true, the message has been retransmitted
(RTM).
Figure 10.1.1…01…Binary Header Format
10.1.2 S̲i̲g̲n̲a̲l̲ ̲C̲o̲n̲t̲e̲n̲t̲
The signal consists of the Signal Header and the Signal
Text. They each consist of a variable number of lines.
A line consists of a ST-character (ASCII code decimal
30) followed by a byte count (BC). After this follows
the line content. This contains the narrative information
and may consist of up to 69 ASCII-characters. The
line is terminated with a new line character (ASCII
code decimal 13). BC is the number of bytes in the
line content +1, refer to Figure 10.1.2.1.
In Figure 10.1.2.2 (a+b) is given the general layout
of a signal (only the line content is shown). In the
following all the lines/ fields are defined. The numbers/letters
refer to the line numbers/field descriptors in the
figures. Text strings not included in a field description
has fixed appearence. The order in which the line
appears must be kept.
Line 1 - Header line
- Must always be present
Field A - Action Precedence, 1 character
Field B - Info Precedence, 1 character
Field C - Date and Time, 14 characters,
2 digits, day of month
2 digits, hour of day
2 digits, minutes of hour
1 character "Z" - GMT
1 space
3 characters, month name
1 space
2 digits, year
Field C1- 6 characters string " ZPW "
2 digits, day of month
2 digits, hour of day
2 digits, minutes of hour
1 character, "Z" - GMT
1 space
3 characters, month name
1 space
2 digits, year
Field C2- 2 space
3 characters, "ZFG", "ZFD" or "ZDK"
5 space characters
6 character strings "MSG-ID"
1 space character
Field D - Message ID, 6 characters, 3 characters
terminal ID (1 character MEDE ID, 1 character
Comcenter ID, 1 character Terminal ID)
3 digits cyclic sequence No.
Fields A and B are optional. Either A or B must
be present. Fields C and D are mandatory.
Field C1 and C2 are optional.
Line 2 - From address (sender)
- Must always be present.
7 character text string "FM....."
followed by:
Field E - Variable length (max. 62 bytes text field,
name of originating addressee derived
from the ANO.
Line 3, 4, 6 - To addresses (Receiver)
- One of these lines must be present.
Line 3, 4, 5, 6
- These lines may occur multiple times. Only when
the opening texts 'TO' and 'INFO' is changed from
that of the preceding line, it is printed.
Line 3 - To address
- 7 character text string "TO....."
followed by:
Field F - Variable length (max 62 bytes) plain
text field, name of destination addressee
derived from the ANO.
Line 4 - To AIG
- 7 character text string "TO....."
followed by:
Field G - Seven character string identifying the
AIG, is has the format AIGnnnn, where
nnnn is in the range 1600-1699.
Line 5 - Omit address
- 7 character text string "XMT....."
followed by:
Field H - Twenty character long plain text field,
name of the addressee derived from the
ANO, (included in the previous AIG) to
which the message shall not be delivered,
i.e. omit address from AIG. XMT lines
occur immediately after the TO AIG-line
to which they refer.
Line 6 - INFO address
- 7 character text string "INFO..."
followed by:
Field I - same as field F
Line 7 - Separator
- 2 character string "BT"
Line 8 - Classification
- Must always be present
Field J - 35 character long string:
Security Classification
3 space characters
Field K - Optional. 31 character long string:
Special Category
The fields 3 and K are composed of a set of letters
(plain text) separated by space characters.
Line 9 - SIC (Subject Indicator Codes)
- Optimal
5 character text string "SIC.."
followed by up to 3 fields.
Field L1 - 3 character SIC-code
Field L2 The codes are separated
Field L3 by the character "/"
Line 10 - Message text
- Optimal. May occur multiple times.
Line 11 - Separator
- 2 character string "BT"
Line 12 - Internal Distribution
- Optimal
10 character text string "INT.DIST.."
followed by:
Field N - Variable length (max 59 characters) of
information relating to the internal
distribution of the message. This line
may occur multiple times.
Line 13 - 'Make even line'
- Is always present
Empty line (i.e. no characters) or containing a
space character (decimal value 32) to make the
size of the message to an even number of bytes.
Line 14 - Release Time
- Only at printout
16 character text string "RELEASE...TIME:"
followed by:
Field D - DTG of when the message was released
for distribution. Format as field C
Line 15 - Retrieval Time
- Only at printout
16 character text string "RETRIEVAL.TIME:"
followed by:
Field P - DTG to be used when the message is retrieved
from the HDB-data base. Format as field
C. In case the message cannot be retrieved,
the field is filled with space characters.
Figure 10.1.2.1…01…Signal Format
1. A.I.DDHHMMZ.MON.YY..ZPW.DDHHMMZ.YY..ZDK.....MSG.ID.MCT999
A B C C1 C2 D
2. FM.....SENDER
E
3. TO.....RECEIVER
F
4. .......AIG1699
G
5. XMT....EXEPTION IN AIG1699
H
6. INFO...RECEIVER
I
7. BT
8. C.L.A.S.S.I.F.I.C.A.T.I.O.N.T.E.X.T...
J Continued
S.P.E.C.I.A.L...C.A.T.E.G.O.R.Y
K
9. SIC..AAA/BBB/CCC
L1 L2 L3
Figure 10.1.2.2.a…01…Signal Line Format…01…(Signal Header)
Figure 10.1.2.2.b…01…Signal Line Format…01…(Signal Text)
10.1.3 A̲d̲d̲r̲e̲s̲s̲ ̲L̲i̲s̲t̲ (ref. Figure 10.1.3)
The Address List has a 1-1 correspondence with the
signal header. One word in the address list corresponds
to one record in the signal header.
1. word in address list corresponds to the "fm" record
in the signal header.
One word is parted into 3.
Code (bit 15-13) value 0-7
MEDE-ID (bit 12-8) value 0-31
Number (bit 7-0) value 0-255
C̲o̲d̲e̲s̲
0 To address
1 INFO address
2 Negative To address
3 Negative INFO address
4 To address AIG
5 AIG, XMT
6 FM
7 spare
M̲E̲D̲E̲-̲I̲D̲
The MEDE-ID takes the value 0-26.
27-31 will never appear.
MEDE-ID
0 Used for AIGs
1 A
2 B
3 C Spare
4 D Spare
5 E
6 F
7 G Spare
8 H
9 I Spare
10 J Spare
11 K
12 L
13 M Spare
14 N
15 O Spare
16 P SCC
17 Q SCC
18 R Spare
19 S SCC (SIP) at P
20 T NATO
21 U NATO
22 V NATO
23 W NATO
24 X NATO
25 Y Spare
26 Z SCC (SIP) at Q
27-31 Not to be used
Note that SCC's are not addressable as narrative message
receivers. Thus the values 16, 17 never occur.
For AIGs the MEDE-ID is zero.
The Number Field is for MEDEs 0-255,
For AIGs (MEDE-ID 0) the number field is 0-255.
This number represents the Logical AIG Number (256
AIGs in range 1600 - 13999 converted to 0-255).
An example of the address list corresponding to the
signal in figure 5 is shown in figure 10.1.3. The
MEDE-IDs used are arbitrary.
AIG12345 has the Logical Number 56 dedicated.
Figure 3.1.3…01…Address List
10.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲
Control Messages are defined as a set of messages created
by the SFS, NSS (at the Node/MEDEs) and the SCC.
The messages are used for exchange of control information
between the:
1. SCC and the Node(s) (NSS)
2. SCC and the MEDE(s) (SFS)
3. SFS and the NSS at the MEDEs.
The control messages created at the Node/MEDE are created
as a result of events and does not invoke manual interaction
from a MEDE operator.
The control message created at the SCC is created as
a result of an event. The event is:
- A control message arrives at the SCC reporting
a condition.
- An SCC operator has updated a table/file.
A control message consists of two parts. The routing
header, which contains information about how to route
the message to the receiver with the given precedence.
The receiver is either the Node (NSS), the MEDE (SFS)
or the SCC.
The second part of the control message contains the
control information which always begin with a type
and a category and a sender identification. This information
is used by the receiver to identify the message. The
actual control information complete the message.
The concept is outlined on the next page.
C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲
A control message is formatted as shown on the figure
below.
…0c…insert table…0c…
In the following the different types of control messages
foreseen are described.
A reference is given to a seciton, where the control
information is described in details.
Each Control Message contains binary header and possible
control information. The binary header includes routing
header and control message header, and they are described
in the following.
R̲o̲u̲t̲i̲n̲g̲ ̲H̲e̲a̲d̲e̲r̲
The Routing Header gives easy access to essential
parameter used for the routing of the message.
The information is:
o Spare (NSS: Node-to-node Serial No)
o Precedence
o Main Type
o Orbit Count
o Routing Mask
o Byte Count
C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲ ̲H̲e̲a̲d̲e̲r̲
It gives the following information about the control
message:
o Type
o Category
o Originator
o DTG
Data Description for B̲I̲N̲A̲R̲Y̲ ̲H̲E̲A̲D̲E̲R̲ ̲(̲R̲o̲u̲t̲i̲n̲g̲ ̲H̲e̲a̲d̲e̲r̲)̲
…0c…insert table…0c…
Data Description for B̲i̲n̲a̲r̲y̲ ̲H̲e̲a̲d̲e̲r̲ ̲(̲R̲o̲u̲t̲i̲n̲g̲ ̲H̲e̲a̲d̲e̲r̲)̲
…0c… insert table…0c…
Data Description for B̲i̲n̲a̲r̲y̲ ̲H̲e̲a̲d̲e̲r̲ ̲(̲C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲
̲H̲e̲a̲d̲e̲r̲)
…0c…insert table…0c…
10.2.1 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲ ̲t̲o̲ ̲t̲h̲e̲ ̲M̲E̲D̲E̲
…0c…insert table…0c…
10.2.1.1 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲O̲n̲-̲L̲i̲n̲e̲ ̲D̲i̲a̲g̲n̲o̲s̲t̲i̲c̲ ̲R̲e̲q̲u̲e̲s̲t̲
Precednece R
Main Type: # 01 (To MEDE)
Type: TYP01
Category: CAT0100
Originator: SCC
Control Information: N/A
10.2.1.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲A̲I̲G̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲/̲I̲n̲s̲e̲r̲t̲/̲D̲e̲l̲e̲t̲e̲
Precedence: Z
Main Type: # 01 (To MEDE)
Type: TYP02
Category: CAT0201 Correct AIG
CAT0202 Insert AIG
CAT0203 Delete AIG
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: A̲I̲G̲ ̲T̲a̲b̲l̲e̲/̲U̲p̲d̲a̲t̲e̲/̲I̲n̲s̲e̲r̲t̲/̲D̲e̲l̲e̲t̲e̲
…0c…insert table…0c…
10.2.1.3 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲A̲N̲O̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲/̲I̲n̲s̲e̲r̲t̲/̲D̲e̲l̲e̲t̲e̲
Precedence: Z
Main Type: # 01
Type: TYP02 (Table Update)
Category: CAT0204: Correct ANO
CAT0205: Insert ANO
CAT0206: Delete ANO
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: A̲N̲O̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲/̲I̲n̲s̲e̲r̲t̲/̲D̲e̲l̲e̲t̲e̲
…0c…insert table…0c…
10.2.1.4 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲U̲S̲P̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲/̲I̲n̲s̲e̲r̲t̲/̲D̲e̲l̲e̲t̲e̲
USP ̲UPDATE ̲CM
Precedence: Z
Main Type: " 01
Type: TYPE02 (Table Update)
Category: CAT0207: (Correct USP)
CAT0208: (Insert USP)
CAT0209: (Delete USP)
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: U̲S̲P̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲/̲I̲n̲s̲e̲r̲t̲/̲D̲e̲l̲e̲t̲e̲
…0c…insert table…0c…
10.2.1.4.1 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲S̲C̲C̲ ̲M̲o̲d̲e̲ ̲C̲h̲a̲n̲g̲e̲
SCC ̲MODE ̲CM
Precedence: Z
Main Type: # 01
Type: TYP02
Category: CAT0210
Originator: SCC
Control Information: N/A
10.2.1.4.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲2̲4̲ ̲H̲o̲u̲r̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲
STATISTICS
Precedence: Z
Main Type: # 01
Type: TYP03
Category: CAT0300
Originator: SCC (NES)
Control Information:
MSG ̲RELTY:
…0c…insertes tre tabeler MSG ̲RECTY: STATIS ̲REC:…0c…
Data Description for Table: 2̲4̲ ̲H̲o̲u̲r̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲
…0c…insert table…0c…
10.2.1.5 C̲o̲n̲t̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲T̲r̲u̲n̲k̲ ̲F̲a̲i̲l̲u̲r̲e̲
Precedence: Z
Main Type: # 01
Type: TYPE04 (Node Alarm)
Category: CAT0401: Trunk Failure On (hard)
CAT0402: Trunk Failure Off (hard)
CAT0403: Trunk Failure (soft)
Originator: NSS
Control Information:
…0c…insert table…0c…
Data Description for Table: T̲r̲u̲n̲k̲ ̲F̲a̲i̲l̲u̲r̲e̲
…0c…insert table…0c…
10.2.1.6 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲o̲d̲e̲ ̲F̲a̲i̲l̲u̲r̲e̲ ̲O̲n̲/̲O̲f̲f̲
Precedence: Z
Main Type: # 01
Type: TYP04
Category: CAT0404: Node Failure On
CAT0405: Node Failure Off
Originator: NSS
Control Information:
…0c…insert table…0c…
Date Description for Table: N̲o̲d̲e̲ ̲F̲a̲i̲l̲u̲r̲e̲
…0c…insert table…0c…
10.2.1.7 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲P̲D̲N̲ ̲C̲a̲l̲l̲-̲u̲p̲
Precedence: Z
Main Type: # 01
Type: TYP05 (Node Alarm)
Category: CAT0501: NPDN Call-Up successful
CAT0502: NPDN Call-Up not successful
Originator: NSS
Control Information:
…0c…insert table…0c…
Data Description for Table: N̲P̲D̲N̲ ̲C̲a̲l̲l̲-̲U̲p̲
…0c…insert table…0c…
10.2.1.8 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲P̲D̲N̲ ̲C̲l̲o̲s̲e̲-̲D̲o̲w̲n̲
Precedence: Z
Main Type: # 01
Type: TYP05
Category: CAT0501: NPDN Close-Down successful
CAT0502: NPDN Close-Down not successful
Originator: NSS
Control Information:
…0c…insert table…0c…
Data Description for Table: N̲P̲D̲N̲ ̲C̲l̲o̲s̲e̲-̲D̲o̲w̲n̲
…0c…insert table…0c…
10.2.1.9 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲T̲r̲u̲n̲k̲ ̲O̲p̲e̲n̲e̲d̲/̲C̲l̲o̲s̲e̲d̲
Precedence: Z
Main Type: # 01
Type: TYP06
Category: CAT0601: Trunk Opened
CAT0602: Trunk Closed
Originator:
Control Information:
…0c…insert table…0c…
Data Description for Table: T̲r̲u̲n̲k̲ ̲O̲p̲e̲n̲e̲d̲/̲C̲l̲o̲s̲e̲d̲
…0c…insert table…0c…
10.2.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲ ̲t̲o̲ ̲t̲h̲e̲ ̲S̲C̲C̲
…0c…insert table…0c…
10.2.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲ ̲t̲o̲ ̲t̲h̲e̲ ̲S̲C̲C̲ (continued)
…0c…insert table…0c…
10.2.2.1 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲o̲d̲e̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
Precedence: R
Main Type: # 01
Type: TYP06
Category: CAT0600: Statistics
CAT0601: Statistics + Counter Reset
Originator: NSS
Control Information:
…0c…insert table…0c…
Data Description for Table: N̲o̲d̲e̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
…0c…insert table…0c…
Data Description for Table: N̲o̲d̲e̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
(Continued)
…0c…insert table…0c…
10.2.2.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲H̲o̲u̲r̲l̲y̲ ̲R̲e̲p̲o̲r̲t̲
Precedence: R
Main Type: # 01
Type: TYP07
Category: CAT0700: Hourly Report
CAT0701: Report with Counter Reset
Originator: NSS
Control Information:
…0c…insert table…0c…
Data Description for Table: H̲o̲u̲r̲l̲y̲ ̲R̲e̲p̲o̲r̲t̲
…0c…insert table…0c…
10.2.2.4 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲L̲o̲c̲a̲l̲ ̲N̲e̲t̲w̲o̲r̲k̲ ̲S̲t̲a̲t̲u̲s̲
Precedence: Z
Main Type: # 01
Type: TYP09
Category: CAT0900: P R: Counter Reset
CAT0901: P+R E: Status sent after
Node Event
CAT0902: E P: Local Network Request
CAT0903: E+R
Originator: NSS
Control Information:
…0c…insert table…0c…
Data Description for Table: L̲o̲c̲a̲l̲ ̲N̲e̲t̲w̲o̲r̲k̲ ̲S̲t̲a̲t̲u̲s̲
…0c…insert table…0c…
10.2.2.5 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲/̲M̲ ̲S̲w̲i̲t̲c̲h̲o̲v̲e̲r̲ ̲I̲n̲/̲O̲u̲t̲ ̲o̲f̲ ̲O̲p̲e̲r̲a̲t̲i̲o̲n̲
Precedence: Z
Main Type: # 01
Type: TYP10
Category: CAT1001: N/M Switchover
CAT1002: N/M Switchover
CAT1003: N/M out of operation
Originator: SFS
Control Information: N/A
10.2.2.6 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲/̲M̲ ̲S̲t̲a̲n̲d̲-̲b̲y̲ ̲A̲v̲a̲i̲l̲a̲b̲l̲e̲/̲U̲n̲a̲v̲a̲i̲l̲a̲b̲l̲e̲
Precedence: Z
Main Type: # 01
Type: TYP10
Category: CAT1004: Stand-by Available
CAT1005: Stand-by Unavailable
Originator: SFS
Control Information
10.2.2.7 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲O̲n̲-̲L̲i̲n̲e̲ ̲D̲i̲a̲g̲n̲o̲s̲t̲i̲c̲ ̲R̲e̲s̲u̲l̲t̲
Precedence: R
Main Type: # 01
Type: TYP11
Category: CAT1100
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: O̲n̲-̲L̲i̲n̲e̲ ̲D̲i̲a̲g̲n̲o̲s̲t̲i̲c̲ ̲R̲e̲s̲u̲l̲t̲
…0c…insert table…0c…
10.2.2.8 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲D̲i̲s̲c̲ ̲O̲n̲/̲O̲f̲f̲ ̲N̲o̲t̲i̲c̲e̲
Precedence: R
Main Type: # 01
Type: TYP12
Category: CAT1201: Disc on
CAT1202: Disc off
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: D̲i̲s̲c̲ ̲O̲n̲/̲O̲f̲f̲ ̲N̲o̲t̲i̲c̲e̲
…0c…insert table…0c…
10.2.2.9 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲U̲S̲P̲ ̲P̲r̲o̲f̲i̲l̲e̲ ̲C̲o̲r̲r̲e̲c̲t̲e̲d̲/̲I̲n̲s̲e̲r̲t̲e̲d̲/̲D̲e̲l̲e̲t̲e̲d̲
Precedence: R
Main Type: # 01
Type: TYP13
Category: CAT1301: Profile Corrected
CAT1302: Profile Inserted
CAT1303: Profile Deleted
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: U̲S̲P̲ ̲P̲r̲o̲f̲i̲l̲e̲ ̲A̲d̲d̲e̲d̲/̲I̲n̲s̲e̲r̲t̲e̲d̲/̲D̲e̲l̲e̲t̲e̲d̲
…0c…insert table…0c…
10.2.2.10 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲M̲E̲D̲E̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
Precedence: R
Main Type: # 01
Type: TYP14
Category: CAT1400
CAT1401: Statistics with Counter
Reset
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: M̲E̲D̲E̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
…0c…insert table…0c…
10.2.2.11 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲M̲E̲D̲E̲ ̲H̲o̲u̲r̲l̲y̲ ̲R̲e̲p̲o̲r̲t̲
Precedence: R
Main Type: # 01
Type: TYP15
Category: CAT1500
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table M̲E̲D̲E̲ ̲H̲o̲u̲r̲l̲y̲ ̲R̲e̲p̲o̲r̲t̲
…0c…insert table…0c…
10.2.2.12 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲K̲e̲e̲p̲ ̲A̲l̲i̲v̲e̲ ̲M̲e̲s̲s̲a̲g̲e̲
Precedence: Z
Main Type: # 01
Type: TYP16
Category: CAT1600
Originator: SCC
Control Information: Please refer to: FIX/1160/PSP/0091
10.2.2.13 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲A̲C̲P̲1̲2̲7̲ ̲a̲n̲d̲ ̲N̲/̲T̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
Precedence: R
Main Type: # 01
Type: TYP17
Category: CAT1700
CAT1701: Statistics with Counter
Reset
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: A̲C̲P̲1̲2̲7̲ ̲a̲n̲d̲ ̲N̲/̲T̲ ̲S̲t̲a̲t̲i̲s̲t̲i̲c̲s̲
…0c…insert table…0c…
10.2.3 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲s̲ ̲t̲o̲ ̲t̲h̲e̲ ̲N̲S̲S̲
…0c…insert table…0c…
10.2.3.1 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲R̲o̲u̲t̲i̲n̲g̲ ̲T̲a̲b̲l̲e̲
Precedence: Z
Main Type: # 03
Type: TYP17
Category: CAT1700
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: R̲o̲u̲t̲i̲n̲g̲ ̲T̲a̲b̲l̲e̲
…0c…insert table…0c…
10.2.3.2 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲O̲p̲e̲n̲/̲C̲l̲o̲s̲e̲ ̲T̲r̲u̲n̲k̲
Precedence: Z
Main Type: # 03
Type: TYP18
Category: CAT1801: Open Trunk
CAT1802: Close Trunk
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: O̲p̲e̲n̲/̲C̲l̲o̲s̲e̲ ̲T̲r̲u̲n̲k̲
…0c…insert table…0c…
10.2.3.4 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲P̲r̲i̲m̲a̲r̲y̲ ̲P̲a̲t̲h̲ ̲f̲o̲r̲ ̲D̲a̲t̲a̲ ̲U̲s̲e̲r̲
Precedence: Z
Main Type: # 03
Type: TYP19
Category: CAT1903: Primary Path for Data User
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table:\ P̲r̲i̲m̲a̲r̲y̲ ̲P̲a̲t̲h̲ ̲f̲o̲r̲ ̲D̲a̲t̲a̲
̲U̲s̲e̲r̲s̲
…0c…insert table…0c…
10.2.3.5 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲S̲e̲t̲ ̲R̲e̲t̲r̲a̲n̲s̲m̲i̲s̲s̲i̲o̲n̲ ̲T̲h̲r̲e̲s̲h̲o̲l̲d̲
Precedence: Z
Main Type: # 03
Type: TYP20
Category: CAT2000
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: S̲e̲t̲ ̲R̲e̲t̲r̲a̲n̲s̲m̲i̲s̲s̲i̲o̲n̲ ̲T̲h̲r̲e̲s̲h̲o̲l̲d̲
…0c…insert table…0c…
10.2.3.6 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲S̲e̲t̲ ̲T̲r̲u̲n̲k̲ ̲Q̲u̲e̲u̲e̲ ̲T̲h̲r̲e̲s̲h̲o̲l̲d̲
Precednece : Z
Main Type: # 03
Type: TYP21
Category: CAT2100
Originator: SCC
Control Information:
…0c…insert table…0c…
Data Description for Table: S̲e̲t̲ ̲T̲r̲u̲n̲k̲ ̲Q̲u̲e̲u̲e̲ ̲T̲h̲r̲e̲s̲h̲o̲l̲d̲
…0c…insert table…0c…
10.2.3.7 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲L̲o̲c̲a̲l̲ ̲N̲e̲t̲w̲o̲r̲k̲ ̲S̲t̲a̲t̲u̲s̲ ̲R̲e̲q̲u̲e̲s̲t̲
Precedence: Z
Main Type: # 03
Type: TYP22
Category: CAT2200
Originator: SCC
Control Information:
…0c…insert table…0c…
10.2.3.8 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲N̲P̲D̲N̲ ̲C̲a̲l̲l̲-̲u̲p̲/̲C̲l̲o̲s̲e̲-̲d̲o̲w̲n̲
Precedence: Z
Main Type: # 03
Type: TYP23
Category: CAT2301: NPDN Call-Up
CAT2303: NPDN Close-Down
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: N̲P̲D̲N̲ ̲C̲a̲l̲l̲-̲u̲p̲/̲C̲l̲o̲s̲e̲-̲d̲o̲w̲n̲
…0c…insert table…0c…
10.2.3.9 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲L̲o̲c̲a̲l̲ ̲R̲o̲u̲t̲i̲n̲g̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲
Precedence: Z
Main Type: # 03
Type: TYP24
Category: CAT2400
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: L̲o̲c̲a̲l̲ ̲R̲o̲u̲t̲i̲n̲g̲ ̲T̲a̲b̲l̲e̲ ̲U̲p̲d̲a̲t̲e̲
…0c…insert table…0c…
10.2.3.10 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲C̲o̲n̲f̲i̲g̲u̲r̲a̲t̲i̲o̲n̲
Precedence: Z
Main Type: # 03
Type: TYP25
Category: CAT2501: Configuration Normal
CAT2502: Configuration Alt. 1
CAT2503: Configuration Alt. 2
Originator: SFS
Control Information: N/A.
10.2.3.11 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲O̲p̲e̲n̲/̲C̲l̲o̲s̲e̲ ̲T̲r̲u̲n̲k̲
Precedence: Z
Main Type: # 03
Type: TYP18
Category: CAT1801: Open Trunk
CAT1802: Close Trunk
Originator: SFS
Control Information:
…0c…insert table…0c…
Data Description for Table: O̲p̲e̲n̲/̲C̲l̲o̲s̲e̲ ̲T̲r̲u̲n̲k̲
…0c…insert table…0c…
10.2.3.12 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲A̲C̲K̲/̲N̲A̲C̲K̲
Precedence: S
Main Type: # 03
Type: TYP26
Category: CAT2600/CAT2601
Originator: NSS
Control Information:
…0c…insert table…0c…
10.2.3.13 C̲o̲n̲t̲r̲o̲l̲ ̲M̲e̲s̲s̲a̲g̲e̲:̲ ̲M̲I̲C̲K̲/̲M̲A̲C̲K̲
Precedence: S
Main Type: # 03
Type: TYP27
Category: CAT2700/CAT2701
Originator: NSS
Control Information:
…0c…insert table…0c…
