top - download
⟦e28dbf9eb⟧ Wang Wps File
Length: 61894 (0xf1c6)
Types: Wang Wps File
Notes: CPS/TMA/021
Names: »3006A «
Derivation
└─⟦f6d15510a⟧ Bits:30006171 8" Wang WCS floppy, CR 0259A
└─ ⟦this⟧ »3006A «
WangText
…05……00……00……00……00…@…02…@
@ @…06…?…0a…? >…09…>
=…0d…= =…07…<…0b…<…0e…<…01…< ;…0b…;…0c…;…0d…;…02…;…07…:…09…:…0b…:…00…:…05…9…08…9…0b…9…00…9 9…06…8…09…8…0c…8…00…8 8…06…7…08…7…0a…7…00…7…86…1 …02…
…02… …02…
…0f… 3006A/rt …02…CPS/TMA/021
…02…CLA/850315…02……02…
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB-TRAINING MANUAL …02…Issue 2…02…CAMPS
…0e…
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB TRAINING MANUAL
CPS/TMA/021
CDRL Logistics Support No. 03A
Line Item No. 8.2.4-B
Carsten Larsen
Jan Lauridsen
SHAPE (2), CLA, NEN, ALG, ER[, LT, QA, GQAR,
LU, Conf. Mgmt.,
…0f… ILS Manager 850315
Issue 3
850315
Conf. Mgmt. 850315…0e…
3006A/rt …02…CPS/TMA/021
…02…CLA/850315…02……02…ii
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB TRAINING MANUAL …02…Issue 2…02… CAMPS
830328 All Issue 1 of Document
831122 All Issue 2 of manual includes
minor editorial changes.
850315 All Issue 3 of manual is
up-
dated in accordance with
changes in
SUPV/MDCO/MSO Operation
Manuals.
…0f… 3006A/rt …02…CPS/TMA/021
…02…CLA/850315…02… iii
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB TRAINING MANUAL …02…Issue 2…02… CAMPS
…0e…
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
PREFACE
1 INTRODUCTION .................................
1
1.1 SCOPE ....................................
1.2 OVERVIEW .................................
2 OPERATOR ACCESS TO CAMPS .....................
2.1 LEARNING OBJECTIVE .......................
2.2 STUDY REFERENCE ..........................
2.3 ASSIGNMENTS ..............................
2.4 MULTIPLE CHOICE SELF-QUIZ ................
2.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
3 SYSTEM CONTROL ...............................
3.1 LEARNING OBJECTIVE .......................
3.2 STUDY REFERENCE ..........................
3.3 ASSIGNMENTS ..............................
3.4 MULTIPLE CHOICE SELF-QUIZ ................
3.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
4 USER AND DEVICE PROFILE CONTROL ..............
4.1 LEARNING OBJECTIVE .......................
4.2 STUDY REFERENCE ..........................
4.3 ASSIGNMENTS ..............................
4.4 MULTIPLE CHOICE SELF-QUIZ ................
4.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
5 ADDRESS SCHEME CONTROL .......................
5.1 INCOMING MESSAGES ........................
5.1.1 Learning Objective ...................
5.1.2 Study Reference ......................
5.1.3 Assignments ..........................
5.1.4 Multiple Choice Self-quiz ............
5.1.5 Multiple Choice Self-quiz Answer .....
5.2 STUDY REFERENCE ..........................
5.2.1 Learning Objective ...................
5.2.2 Study Reference ......................
5.2.3 Assignments ..........................
5.2.4 Multiple Choice Self-quiz ............
5.2.5 Multiple Choice Self-quiz Answer .....
…0f… 3006A/rt …02…CPS/TMA/021
…02…CLA/850315…02… iv
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB TRAINING MANUAL …02…Issue 2…02… CAMPS
…0e…
5.3 ASSIGNMENTS ..............................
5.3.1 Learning Objective ...................
5.3.2 Study Reference ......................
5.3.3 Assignments ..........................
5.3.4 Multiple Choice Self-quiz ............
5.3.5 Multiple Choice Self-quiz Answer .....
6 SYSTEM PARAMETER CONTROL......................
6.1 LEARNING OBJECTIVE .......................
6.2 STUDY REFERENCE ..........................
6.3 ASSIGNMENTS ..............................
6.4 MULTIPLE CHOICE SELF-QUIZ ................
6.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
…0f… 3006A/rt …02…CPS/TMA/021
…02…CLA/850315…02… v
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB TRAINING MANUAL …02…Issue 2…02… CAMPS
…0e…
7 PRINT CONTROL ................................
7.1 LEARNING OBJECTIVE .......................
7.2 STUDY REFERENCE ..........................
7.3 ASSIGNMENTS ..............................
7.4 MULTIPLE CHOICE SELF-QUIZ ................
7.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
8 COMMAND AND SECURITY CONTROL..................
8.1 LEARNING OBJECTIVE .......................
8.2 STUDY REFERENCE ..........................
8.3 ASSIGNMENTS ..............................
8.4 MULTIPLE CHOICE SELF-QUIZ ................
8.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
9 QUEUE CONTROL ................................
9.1 LEARNING OBJECTIVE .......................
9.2 STUDY REFERENCE ..........................
9.3 ASSIGNMENTS ..............................
9.4 MULTIPLE CHOICE SELF-QUIZ ................
9.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .........
10 GLOBAL NO SERIES CONTROL ....................
10.1 LEARNING OBJECTIVE .....................
10.2 STUDY REFERENCE ........................
10.3 ASSIGNMENTS ............................
10.4 MULTIPLE CHOICE SELF-QUIZ ..............
10.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
11 DISC CONTROL ................................
11.1 LEARNING OBJECTIVE .....................
11.2 STUDY REFERENCE ........................
11.3 ASSIGNMENTS ............................
11.4 MULTIPLE CHOICE SELF-QUIZ ..............
11.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
12 ENGINEERING FUNCTION (NORMAL MODE) ..........
12.1 LEARNING OBJECTIVE .....................
12.2 STUDY REFERENCE ........................
12.3 ASSIGNMENTS ............................
12.4 MULTIPLE CHOICE SELF-QUIZ ..............
12.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
…0f… 3006A/rt …02…CPS/TMA/021
…02…CLA/850315…02… vi
CAMPS SUPERVISOR, MDCO, AND MSO
ON-THE-JOB-TRAINING MANUAL …02…Issue 2…02… CAMPS
…0e…
13 ENGINEERING FUNCTION (RESTART MODE)..........
13.1 LEARNING OBJECTIVE .....................
13.2 STUDY REFERENCE ........................
13.3 ASSIGNMENTS ............................
13.4 MULTIPLE CHOICE SELF-QUIZ ..............
13.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
14 MESSAGE DISTRIBUTION ASSISTANCE .............
14.1 LEARNING OBJECTIVE .....................
14.2 STUDY REFERENCE ........................
14.3 ASSIGNMENTS ............................
14.4 MULTIPLE CHOICE SELF-QUIZ ..............
14.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
15 OUTGOING MESSAGE ASSISTANCE .................
15.1 LEARNING OBJECTIVE .....................
15.2 STUDY REFERENCE ........................
15.3 ASSIGNMENTS ............................
15.4 MULTIPLE CHOICE SELF-QUIZ ..............
15.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
16 INCOMING MESSAGE ASSISTANCE..................
16.1 LEARNING OBJECTIVE .....................
16.2 STUDY REFERENCE ........................
16.3 ASSIGNMENTS ............................
16.4 MULTIPLE CHOICE SELF-QUIZ ..............
16.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
17 SERVICE MESSAGES ............................
17.1 LEARNING OBJECTIVE .....................
17.2 STUDY REFERENCE ........................
17.3 ASSIGNMENTS ............................
17.4 MULTIPLE CHOICE SELF-QUIZ ..............
17.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
18 RETRIEVAL OF MESSAGES .......................
18.1 LEARNING OBJECTIVE .....................
18.2 STUDY REFERENCE ........................
18.3 ASSIGNMENTS ............................
18.4 MULTIPLE CHOICE SELF-QUIZ ..............
18.5 MULTIPLE CHOICE SELF-QUIZ ANSWER .......
1 I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲
1.1 S̲C̲O̲P̲E̲
It is recommended that all (new) personnel read through
CAMPS SYSTEM DESCRIPTION MANUAL before getting access
to CAMPS. The manual provides an introduction and overall
description of the message processing system.
This ON-THE-JOB-TRAINING (OJT) manual applies to the
following operators in CAMPS (Computer Aided Message
Processing System)
- Supervisor (SUPV)
- Message Distribution Control (MDCO)
- Message Service (MSO)
This OJT manual is part of the OJT package which is
aimed at providing selfpacked instructions to users
of CAMPS.
1.2 O̲V̲E̲R̲V̲I̲E̲W̲
This OJT manual is divided into several sections or
units. Each unit consists of a set of frames. To introduce
you to the unit, a Learning Objective explains the
purpose of the specific unit. The Study Reference lists
the sections of the involved manual(s) to be read before
approaching the operations on the CAMPS computer. The
Assignments is the frame for a detailed procedure which
will guide you through the actions to be taken to optimize
the daily operation of CAMPS. In front of the assignment
figure(s) will be displayed giving an overview of the
on-line operator commands. Pointer(s) on this figure
will indicate which commands in question for this unit.
Finally, a Multiple Choice Self-Quiz is provided for
measuring the actual progress within the specific unit,
and for your convenience, a Multiple Choice Self-Quiz
Answer is also provided. Try to solve the Self-Test
without peeking into the page with answers.
In this OJT manual you will find a table right on top
of each section.
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲S̲O̲ ̲:̲ ̲ ̲X̲ ̲ ̲ ̲
This table will inform you which supervisory operator
who will get benefit of the section.
If both Supervisor, MDCO and MSO should employ common
sections, you will find reference to all three operator
manuals.
…86…1 …02… …02… …02… …02…
…01…2 O̲P̲E̲R̲A̲T̲O̲R̲ ̲A̲C̲C̲E̲S̲S̲ ̲T̲O̲ ̲C̲A̲M̲P̲S̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲X̲ ̲ ̲ ̲
2.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. Become familiar with the VDU and
MSP and be able to get access to the system.
2.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Camps System Description Manual
- section CAMPS User Groups
- section Operational Security
- section Access Control
Supervisor Operation Manual
MDCO Operation Manual
MSO Operation Manual
- section Introduction
- section Principle Of Operation - VDU
- section Principle Of Operation - MSP
- section Access Procedures
- section Sign On (SION)
- section Sign Off (SIOF)
- section High Level Menu
2.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 In CAMPS System Description Manual study the above
referenced sections.
2 In the Operation Manual study the Introduction
section and review the Principle Of Operation -
VDU/MSP sections.
3 In the Operation Manual study the Access Procedures
and Sign On sections and do the procedures described
step-by-step.
4 In high level menu, select the operator-type you
are assigned to operate.
5 Review the fold-out block diagram placed on the
last page of the Operation Manual.
6 If you are SUPV, proceed to section 3.
If you are MDCO, proceed to section 14
If you are MSO, proceed to section 15.
2.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Which special function key is used if you want
to enter a 4-letter command?
a. F1
b. F2
c. F11
d. F14
The logical access to a terminal position is achieved
by the sign-on procedure.
2 After you have entered the command SION - what
is then entered?
a. Hello - let me on
b. Id Code and Time Stamp
c. Id Code and Password
d. Id Code and Confirmation Code
3 In High Level Menu, you select the operator function
you require.
What must be done to get hold of High Level Menu?
a. Hit the MON-key
b. Press the ATTN-kay
c. Move the HLM-key
d. touch the ?-key
2.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 a. Supervisor/MDCO/MSO
Operation Manual
- section -
Keyboard Unit
-
Special Functions
2 c. Supervisor/MDCO/MSO
Operation Manual
- section -
SIGN ON
3 b. Supervisor/MDCO/MSO
Operation Manual
- section -
High Level Menu.
3̲ ̲S̲Y̲S̲T̲E̲M̲ ̲C̲O̲N̲T̲R̲O̲L̲ ̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
3.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. Become familiar with the System
Control functions and be able to identify the single
sub-control groups.
3.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
CAMPS System Description Manual
- Section Supervisory Transactions
Supervisor Operation Manual
- Section: Supervisor Menu (SUPV)
- Section: System Control-Introduction
- Section: System Control Menu (SYSC)
3.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. In CAMPS System Description Manual study the above
referenced section.
2. On figure 3.2-1, locate the on-line command which
is actual for this section.
3. In the operation manual study the Supervisor Menu
section and do the procedures described step-by-step
and select - SYSC.
4. In the operation manual study the system Control
Section.
5. In the operation manual study the System Control
Menu and do the procedures described step-by-step
and select ADSC.
6. Complete this part by answering the self-test questions
set up in the section 3.4 MULTIPLE CHOICE SELF-QUIZ.
7. Compare your solutions with section 3.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER:
8. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions.
3.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
TBD
3.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
T̲B̲D̲
4 U̲S̲E̲R̲ ̲A̲N̲D̲ ̲D̲E̲V̲I̲C̲E̲ ̲P̲R̲O̲F̲I̲L̲E̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
4.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify parameters belonging to
the parts which describe the user and device profiles.
4.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Supervisor Operation Manual
- section: Device Control (DEVC)
with the subsections.
- Terminal Position Control (TEPC)
- PT/OCR/SAPT Control (POSC)
- Channel Control (CHAC)
- section: User Profile Update (UPUP)
- section: System Information Extract (SYIE)
with the subsections.
- Password List (PWLT)
- User Profile Print (UPPT)
- Terminal Profile Print (TPPT)
- Device Profile Print (DPPT)
- Channel Profile Print (CPPT)
4.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. On figure 4.2-1, locate the on-line commands which
are actual for this section.
The functions below Device Control is TEPC, POSC and
CHAC while the associated print functions are contained
below System Information Extract as TPPT, DPPT and
CPPT.
Likewise is the print function to user profile update
UPPT but all the users passwords are contained in the
print function PWLT.
2. Study the referenced sections and do the procedures
described step-by-step in the Operation Manual
by selecting the mnemonic commands mentioned above
in the System Information Extract menu and the
associated commands in the Device Control menu
and User Profile Update.
3. Make yourself a user profile with your own id and
password and set it into a terminal profile.
4. Complete this part by answering the self test questions
set up in the Section 4.4 MULTIPLE CHOICE SELF-QUIZ.
5. Compare your solutions with the Section 4.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
6. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions correct.
4.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1. Which mnemonic command is used to select the function
where you can define user passwords?
a. TEPC
b. POSC
c. CHAC
d. UPUP
2. If you have selected the mnemonic command TEPC,
you will be able to:
a. modify in a terminal profile
b. have a print of a terminal profile
c. modify in a user profile
d. have a print of a user profile
4.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1. d. Supervisor
Operation
Manual
-
section:
User
Profile
Update
2. a. Supervisor
Operation
Manual
-
section:
Terminal
Profile
Update
5 ̲I̲N̲C̲O̲M̲I̲N̲G̲ ̲M̲E̲S̲S̲A̲G̲E̲S̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
5.1 I̲N̲C̲O̲M̲I̲N̲G̲ ̲M̲E̲S̲S̲A̲G̲E̲S̲
5.1.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify the tables used for distribution
of incoming traffic.
5.1.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
CAMPS System Description Manual
- Section Incoming Messages
Supervisor Operation Manual
- Section: Addressing Scheme Control (ADSC)
with the subsections:
- Local PLA Table Update (LPLT)
- Local RI Table Update (LORI)
- SIC Table Update (SICT)
- SDL Table Update (SDLT)
- SCD Table Update (SCDT)
- Section: Table Print (TAPR)
with the subsections:
- Local PLA Table Print (LPLP)
- Local RI Table Print (LORP)
- SIC Table Print (SICP)
- SDL Table Update (SDLT)
- SCD Table Print (SCDP)
5.1.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. In CAMPS System Description Manual study the above
referenced section.
2. On figure 5.1.2-1, locate the on-line commands
which are actual for this section:
The tables used for incoming traffic are contained
below Addressing Scheme Control as LPLT, LORI, SICT,
SDLT, and SCDT while the associated print functions
are contained below Table Print as LPLP, LORP, SICP,
SDLP, and SCDP.
3. Study the referenced sections and do the procedures
described step-by-step in the Operation Manual
by selecting the mnemonic commands mentioned above
in the Table Print menu and the Addressing Scheme
Control menu.
4. Complete this part by answering the self-test questions
set up in the Section 5.1.4 MULTIPLE CHOICE SELF-QUIZ.
5. Compare your solutions with Section 5.1.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
6. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions.
5.1.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 What can you define in a SIC table?
a. SCDs
b. SDLs
c. PECs
d. PLAs
2 Which mnemonic command is used to get access to
the tables where you can define device - or terminal
type.
a. SICT
b. SDLT
c. SCDT
d. SQHT
3 LPLT is used to get access to the Local PLA-Table
update.
Which mnemonic command is used to get the associated
print function?
a. LPLP
b. LORP
c. LROP
d. LLPP
5.1.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b. Supervisor Operation
Manual -
section: SIC-Table
update
2 c. Supervisor Operation
Manual -
section: SCD-Table
update
3 a. Supervisor Operation
Manual - section: Local
PLA-Table Print
5.2 O̲U̲T̲G̲O̲I̲N̲G̲ ̲M̲E̲S̲S̲A̲G̲E̲S̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
5.2.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify the tables used for distribution
of outgoing traffic.
5.2.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
CAMPS System Description Manual
- Section Outgoing Messages
Supervisor Operation Manual
- Section: Addressing Scheme Control (ADSC)
with the subsections.
- AIG Table Update (AIGT)
- PLA Table Update (GPLT)
- RI Table Update (RITA)
- Circuit Table Update (CIRT)
- Section: Table Print (TAPR)
with the subsections.
- AIG Table Print (AIGP)
- PLA Table Print (GPLP)
- RI Table Print (RITP)
- Circuit Table Print (CIRP)
5.2.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. In CAMPS System Description Manual study the above
referenced section.
2. On figure 5.2.2-1, locate the on-line commands
which are actual for this section.
The tables used for outgoing traffic are contained
below Addressing Scheme Control as AIGT, GPLT, RITA,
and CIRT while the associated print functions are contained
below Table Print as AIGP, GPLP, RITP, and CIRP.
3. Study the referenced sections and do the procedures
described step-by-step in the Operation Manual
by selecting the mnemonic commands mentioned above
in the Table Print menu and the Addressing Scheme
Control menu.
Note: References from the Channel Profiles exist
in the Circuit tables (CIRT)
Channel Profile is placed below Device Control
(DEVC) as CHAC.
4. Complete this part by answering the self-test questions
set up in the Section 5.2.4 MULTIPLE CHOICE SELF-QUIZ.
5. Compare your solutions with Section 5.2.5 MULTIPLE
CHOICE SELF-QUIZ.
6. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions.
5.2.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 In the circuit tables you can make two entries.
One entry is the network-type but what is the second
entry?
a. PLAREF
b. classification
c. precedence
d. password
2 You must define a classification to a routing indicator:
a. TRUE
b. FALSE
3 What contains AIG tables?
a. a group of PSUs
b. a group of PTPs
c. a group of PLAs
d. a group of SCDs
4. RITA is used to get access to the RI-Table Update.
Which mnemonic command is used to get the associated
print function?
a. RISP
b. RIPP
c. RIFP
d. RIPF
5.2.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b. Supervisor Operation
Manual -
section: Circuit-Table
Update
2 a. Supervisor Operation
Manual -
section: RI-Table Update
3 c. Supervisor Operation
Manual -
section: AIG-Table
Update
4 d. Supervisor Operation
Manual - section: RI-Table
Print
…86…1 …02… …02… …02… …02…
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲ ̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
5.3 O̲T̲H̲E̲R̲ ̲T̲A̲B̲L̲E̲S̲ ̲
5.3.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall
be able to identify and modify tables and make
use of the functions which perform table updating.
5.3.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Supervisor Operation Manual
- Section: Addressing Scheme Control (ADSC)
with the subsections.
- SCARS/ACCIS Display Table Update (SCCT)
- Operating Signal Table Update (OPST)
- Reorganize all Tables (REOR)
- Abandon Reorganization (CIRT)
- Section: Table Print (TAPR)
with the subsections.
- SCARS/ACCIS Display Table Print (SCCP)
- Operating Signal Table Print (OPSP)
- Table Status Print (TSTP)
5.3.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. On figure 5.3.2-1, locate the on-line commands
which are actual for this section.
The latest tables Addressing Scheme Control consist
of SCCT and OPST while the associated print functions
are contained below Table Print as SCCP and OPSP.
2. Study the referenced sections and do the procedures
described step-by-step in the Operation Manual
by selecting the mnemonic commands mentioned above
in the Table Print menu and the Addressing Scheme
Control menu.
The functions used to reorganize the tables and stop
the reorganization are contained below Addressing Scheme
Control as REOR and ABRO while the associated print
functions are contained below Table Print as TSTP.
3. Study the referenced sections and do the procedures
described step-by-step in the Operation Manual
by selecting the mnemonic commands mentioned above
in the Table Print menu and the Addressing Scheme
Control menu.
4. Complete this part by answering the self-test questions
set up in the Section 5.3.4 MULTIPLE CHOICE SELF-QUIZ.
5. Compare your solutions with Section 5.3.5 MULTIPLE
CHOICE SELF-QUIZ.
6. If any of you answers are wrong, study the reference
indicated, until you understand the material and
answer the examination questions is able to.
5.3.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Which mnemonic command is used to specify the section
where you can define message handling instructions?
a. MHIS
b. OPST
c. SCCT
d. DESM
2 What will happen if you enter the mnemonic command
TSTP? The system will:
a. print out the message
b. print out the error codes
c. print out the table status
d. print out 'UNKNOWN COMMAND'.
5.3.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b. Supervisor Operation
Manual -
section: Operation
Signal Table
2 c. Supervisor Operation
Manual -
section: Table Status
print
6 S̲Y̲S̲T̲E̲M̲ ̲P̲A̲R̲A̲M̲E̲T̲E̲R̲ ̲C̲O̲N̲T̲R̲O̲L̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲ ̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
6.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify the parameters in the system
control.
6.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲S̲:
Supervisor Operation Manual
- section: System Parameter Control (SYPC)
with the subsections
- Print/Punch Parameter Control (PPPC)
- Channel Parameter Control (CMPC)
- ACP127 Parameter Control (ACPC)
- Message Distribution Parameter Control
(MDPC)
- Special Distribution Parameter Control
(SDPC)
- Set Crises Indicator On (CION)
- Set Crises Indicator Off (CIOF)
- Set Quiet-Hour Terminal (SQHT)
- Set Quiet-Hour Off (SQHO)
- Set Flash Queue Time Out (FLQT)
- Close Log CIF (LGCL)
- CAMPS DE RI-control (DRIC)
- Statistics Print on (STON)
- Statistics Print Off (STOF)
- section: System Information Extract (SYIE)
with the subsection.
- System Parameter Print (SPAP)
6.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲
1. On figure 6.2-1 locate the on-line commands which
are actual for this section.
SYPC illustrates the System Parameter Control while
the associated print function is contained below System
Information Extract (SYIE) as SPAP.
2. Study the referenced sections and do the procedures
described step-by-step in the operation manual
by selecting the mnemonic command SPAP in the System
Information Extract menu and all subsections contained
in the system parameter control menu.
3. Complete this part by answering the self test questions
set up in the Section 6.4 MULTIPLE CHOICE SELF-QUIZ.
4. Compare your solutions with the Section 6.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions correct.…86…1
…02… …02… …02… …02… …02…
6.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1. Which mnemonic command is used to specify the section,
where the automatic channel control takes place?
a. ACPC
b. CION
c. CHPC
d. CIOF
2. The tables which are used to distribute outgoing
traffic are contained in the system parameter control
section:
a. TRUE
b. FALSE
3. If you have selected the mnemonic command MDPC,
you will be able to?
a. Route messages for MSO attention
b. Route messages for MDCO attention
c. Route messages for redistribution
d. Route messages for rerun
6.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ (cont'd)
4 If you select FLQT, you can set the flash queue
timeout in different periodes.
Which period is the smallest space?
a. 30 seconds
b. 10 seconds
c. 60 seconds
d. 90 seconds
5 Which mnemonic commands are used to set the crises
indicator on and off respectively?
a. SION and SIOF
b. CION and SIOF
c. SION and CIOF
d. CION and CIOF
6 In which range can the number of lines per page
be regulated for the printers?
a. Range: 1-23
b. Range: 1-79
c. Range: 1-99
d. Range: 1-120
7 In section Special Distribution Parameter Control
(SDPC) you can specify two essential things.
One thing is which devices crypto messages must
be handled on.
What is the second thing?
a. Printer for messages of category FLASH
b. Printer for messages of category ATOMAL
c. Printer for messages of category SECRET
d. Printer for messages of category ROUTINE
6.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 c. Supervisor Operation
Manual - section:
Channel Parameter
Control
2 b. All message traf- Supervisor Operation
Manual -
fic tables are de- section: Channel
Parameter
fined below the Control
Addressing Scheme
Control.
3 b. Supervisor Operation
Manual -
section: Message
Distribution Parameter
Control.
4 a. Supervisor Operation
Manual -
section: Set Flash
Queue
Time Out.
5 d. Supervisor Operation
Manual -
section: Set Crises
Indicator On, Set
Crises Indicator
Off
6 c. Supervisor Operation
Manual -
section: Print/Punch
Parameter Control
7 b. Supervisor Operation
Manual -
section: Special
Distribution Parameter
Control.
7 P̲R̲I̲N̲T̲ ̲C̲O̲N̲T̲R̲O̲L̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲ ̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
7.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify parameters belonging to
the parts which describe the Supervisor Print Control
and the printer functions.
7.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Supervisor Operation Manual
- section: Supervisor Print Control (SUPC)
- section: Log Trace (LGTR)
- section: Print functions
with the subsections.
- Report Printout
- Supervisor Printout
- Statistics Printout
- Log Printout
7.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. In operation manual study section Print functions
and its subsections.
2. locate the actual on-line commands which are actual
for this section.
3. Study the referenced sections and do the procedures
described step-by-step in the Operation Manual.
4. Complete this part by answering the self-test questions
set up in the Section 7.4 MULTIPLE CHOICE SELF-QUIZ.
5. Compare your solutions with the Section 7.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
6. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions correct.…86…1
…02… …02… …02… …02… …02…
7.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1. Which one of the supervisor printers is restricted
to one function only?
a. Supervisor Print
b. Report Print
c. Log Print
d. Statistics Print
2. You can define a code which the users must enter
by security warning.
Of what consists the code?
a. 5 alpha characters
b. 5 any characters
c. 5 numeric characters
d. 5 alphanumeric characters
7.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b. Supervisor operation
Manual - section:
Supervisor Print
Control
2 a. Supervisor operation
Manual - section:
Security Control
8 C̲O̲M̲M̲A̲N̲D̲ ̲C̲O̲N̲T̲R̲O̲L̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
8.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section you shall be
able to identidy and modify the parts which describe
command and security control.
8.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
Supervisor Operation Manual
- section Command Control (CMDC)
- section Security Control (SECC)
- section System Information Extract (SYIE)
with the subsections.
- Command Print (CMPT)
- Supervisor Printout
8.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 8.2-1, locate the on-line commands which
are actual for this section.
CMDC illustrates the Command Control while the associated
print function is contained below System Information
Extract (SYIE) as CMPT.
2 Study the referenced sections and follow the procedures
described step-by-step in the operation manual
by selecting the mnemonic command.CMPT in the System
Information Extract menu and the commands CMDC
and SECC.
3 Complete this part by answering the self-test questions
set up in the Section 8.4 MULTIPLE CHOICE SELF-QUIZ.
4 Compare your solutions with Section 8.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5 If any of your answers are wrong, study the refeence
indicated until you understand the material and
is able to answer the examination questions.
8.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1. In this section, you are able to define a PEC code
to protect commands.
In which way is the code composed.
a. 6 any characters
b. 6 alpha characters
c. 6 numeric characters
d. 6 alphanumeric characters
8.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1. a. Supervisor Operation
Manual - section:
Command Control
9 Q̲U̲E̲U̲E̲ ̲C̲O̲N̲T̲R̲O̲L̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
9.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify the parts which describe
the Queue Control.
9.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Supervisor Operation Manual
- section: Queue Control (QUEC)
with the subsections.
- Circuit Queue Blocked (BLCQ)
- Circuit Queue Unblocked (UBCQ)
- Circuit Queue Cancellation (CACQ)
- Terminal Queue Blocked (BLTQ)
- Terminal Queue Unblocked (UBTQ)
- Terminal Queue Cancellation (CATQ)
- Device Queue Blocked (BLDQ)
- Device Queue Unblocked (UBDQ)
- Device Queue Cancellation (CADQ)
- section: System Information Extract (SYIE)
with the subsections.
- Queue State Print (QSPT)
9.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. On figure 9.2-1, locate the on-line commands which
are actual for this section.
QUEC illustrates the Queue Control while the associated
print function is contained below System Information
Extract (SYIE) as QSPT.
2. Study the referenced sections and do the procedures
described step-by-step in the operation manual
by selecting the mnemonic command QSPT in the System
Information Extract menu and all sections contained
in the Queue Control menu.
3. Complete this part by answering the self-test questions
set up in the Section 9.4 MULTIPLE CHOICE SELF-QUIZ.
4. Compare your solutions with the Section 9.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions correct.…86…1
…02… …02… …02… …02…
9.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1. Which mnemonic command is used to select the section
where you can specify precedences for messages
to be cancelled from the circuit queue.
a. CADQ
b. CATQ
c. CACQ
d. CASQ
2. Which of the following queue possibilities is wrong?
a. Block queue for this terminal
b. Unblock queue for this terminal
c. Terminal queue connection
d. Terminal queue cancellation
9.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1. c. Supervisor
Operation
Manual
-
section:
Circuit
Queue
Cancellation
2. c. Supervisor Operation
Manual - section:
Queue Control Menu
10 G̲L̲O̲B̲A̲L̲ ̲N̲O̲ ̲S̲E̲R̲I̲E̲S̲ ̲C̲O̲N̲T̲R̲O̲L̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
10.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify the parts which describe
the Global No Series Control.
10.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Supervisor Operation Manual
- section: Global No Series Control (GNSC)
with the subsections.
- System No. Series Control (NOSC)
- Channel No. Series Control (NOCC)
- Transaction No. Series reset(NOTR)
10.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. On figure 10.2-1 locate the on-line commands which
are actual for this section.
2. Study the referenced sections and do the procedures
described step-by-step in the operation manual
by selecting the mnemonic command LGTR in the System
Information Extract menu and all sections contained
in the Global No Series Control menu.
3. Complete this part by answering the self-test questions
set up in the Section 10.4 MULTIPLE CHOICE SELF-QUIZ.
4. Compare your solutions with the Section 10.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions correct.…86…1
…02… …02… …02… …02…
10.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1. Which mnemonic command is used to reset the sequence
number used as part of the transaction id?
a. NOCR
b. NOSC
c. NOCC
d. NOTR
10.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1. d. Supervisor Operation
Manual - section:
Transaction No.
Series Reset
11 D̲I̲S̲C̲ ̲C̲O̲N̲T̲R̲O̲L̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
11.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identify and modify the parts which describe
the Disk Control.
11.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲:
Supervisor Operation Manual
- section: Disc Control (DISC)
with the subsections.
- Off-Load Data (OFLD)
- Abandon Off-Load (ABOL)
- Copy System Parameter File (COPY)
- Off-Line Retrieval Off (OROF)
- Off-Line Retrieval On (ORON)
- Off-Line Retrieval Suspend (ORSU)
- List Volumes Currently in Use (VOLI)
- Refuse Mount of Volume (REMO)
- Mount Volume (VCMO)
- Mount Volume for System Use (VSMO)
- Dismount Volume (VODM)
- Name Volume (VONM)
- Volume Delete (VODL)
11.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1. On figure 11.2-1 locate the on-line commands which
are actual for this section.
2. Study the referenced sections and do the procedures
described step-by-step in the operation manual.
3. Complete this part by answering the self-test questions
set up in the Section 11.4 MULTIPLE CHOICE SELF-QUIZ.
4. Compare your solutions with the Section 11.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5. If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions correct.
11.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Which mnemonic command is used to specify that
the system shall make a copy of the system parameter
file from on-line disc to off-line disc.
a. VOMO
b. COPY
c. VOLI
d. COPI
2 Which mnemonic command is used to specify that
the system shall allow operators to retrieve data
from off-line disc.
a. ORON
b. ORSU
c. OROF
d. OROD
11.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b. Supervisor Operation
Manual-
Section: Copy System
Parameter File
2 a. Supervisor Operation
Manual-
Section: Off-Line
Retrieval On
12 E̲N̲G̲I̲N̲E̲E̲R̲I̲N̲G̲ ̲F̲U̲N̲C̲T̲I̲O̲N̲ ̲(̲N̲O̲R̲M̲A̲L̲ ̲M̲O̲D̲E̲)̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
12.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to identidy and make use of the supervisor engineering
functions in normal mode.
12.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
Supervisor Operation Manual
- section: Engineering Functions Introduction
- section: Engineering Menu (SENF) - normal mode
with the subsections:
- Perform System Integrity Check (SICH)
- Perform Message Flow Trace Analysis (PMAN)
- Set Disc Threshold warning Constants (SDTC)
12.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 12.2-1, locate the on-line commands which
are actual for this section.
2 Study the referenced sections and do the procedures
described step-by-step in the operation manual.
3 Complete this part by answering the self-test questions
set up in the Section 12.4 MULTIPLE CHOICE SELF-QUIZ.
4 Compare your solutions with Section 12.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER:
5 If any of your answers are wrong, study the refeence
indicated until you understand the material and
is able to answer the examination questions.
12.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Which mnemonic command is used to select the section,
where you can define the disc file rate threshold?
a. SICH
b. PMAN
c. SDTC
d. DFRT
12.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 c. Supervisor Operation
Manual-
Section: Set Disc
Warning
Threshold Constants
13 E̲N̲G̲I̲N̲E̲E̲R̲I̲N̲G̲ ̲F̲U̲N̲C̲T̲I̲O̲N̲ ̲(̲R̲E̲S̲T̲A̲R̲T̲ ̲M̲O̲D̲E̲)̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
13.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section you shall be
familiarized with the possibilities which excist if
you Sign On when the system is in restart mode.
13.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
Supervisor Operation Manual
- section: Engineering Menu (Restart Mode)
with the subsections:
- System Queue Cancellation (CASQ)
- Cancel All Circuit Queues (CAAC)
- Cancel All Terminal Queues (CAAT)
- Cancel All Device Queues (CAAD)
- Circuit Queue Cancellation (CAAQ)
- Terminal Queue Cancellation (CATQ)
- Device Queue Cancellation (CADQ)
- CAMPS Go (CAGO)
- Queue Status Print (QSPT)
- Storage Occupancy Print (STOC)
13.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 13.2-1, locate the on-line commands which
are actual for this section.
2 Study the referenced sections and if the system
is in restart mode do the procedures described
step-by-step in the operation manual.
3 Complete this part by answering the self-test questions
set up in the Section 13.4 MULTIPLE CHOICE SLEF-QUIZ.
4 Compare your solutions with the Section 13.5 MULTIPLE
CHOICE SELF-QUIZ.
5 If any of your answers are wrong, study the reference
indicated, until you understand and is able to
answer the examination questions correct.
13.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Which mnemonic command is used to exit the restart
mode of operation.
a. CACQ
b. CATQ
c. CADQ
d. CAGO
2 Which mnemonic command is used to select the section,
where you can specify precedences for messages
to be cancelled from the MDCO/MSO queues.
a. CADQ
b. CATQ
c. CACQ
d. SASQ
13.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 d. Supervisor Operation
Manual-
Section: Camps Go
2 d. Supervisor Operation
Manual-
Section: System
queue cancel…86…1
…02… …02… …02… …02…
14 M̲E̲S̲S̲A̲G̲E̲ ̲D̲I̲S̲T̲R̲I̲B̲U̲T̲I̲O̲N̲ ̲A̲S̲S̲I̲S̲T̲A̲N̲C̲E̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲ ̲ ̲X̲ ̲ ̲ ̲
̲M̲S̲O̲ ̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
14.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section,
you shall be able to redirect messages
which are sent for assistance.
14.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
MDCO Operation Manual section MDCO Menu
- section: Message Distribution Assistance
(MDAS)
14.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲
1 On figure 14.2-1, locate MDAS.
2 Study the referenced sections and do the procedures
described step-by-step in the operation manual
by selecting MDAS.
3 Complete this part by answering the self-test questions
set up in the Section 14.4 MULTIPLE CHOICE SELF-QUIZ:
4 Compare your solutions with Section 14.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5 If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions.
6 When you have finished this section, proceed to
section 17.
14.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Messages placed in the distribution queue will
be split up in 3 different actions which place
on the VDU screen will inform you about this?
a. Queue Status Field
b. Response Line Field
c. Terminal Function Field
d. User Area Field
2 A message is sent to you by reason of supervisor
specified distribution.
To which of the following possibilities will the
message be presented?
a. Incoming Message Assistance
b. Alternative Distribution Assistance
c. Objects from SCARS or CCIS
14.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 c. MDCO Operation Manual
- section: Message
Distribution Assistance.
2 a. MDCO Operation Manual
- section: Message
Distribution Assistance
(Incoming Message
Assistance).…86…1
…02… …02… …02… …02…
15 O̲U̲T̲G̲O̲I̲N̲G̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲A̲S̲S̲I̲S̲T̲A̲N̲C̲E̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲ ̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲ ̲:̲ ̲ ̲X̲ ̲ ̲ ̲
15.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section,
you shall be able to modify outgoing messages,
which are sent for assistance.
Time Frame: XX hours
15.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
MSO Operation Manual Section: MSO Menu
- section: Outgoing Message Service Assistance (OMAS)
15.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 15.2-1, locate OMAS.
2 Study the referenced section and do the
procedures described step-by-step in the
operation manual by selecting the mnemonic
command above.
3 Complete this part by answering the self-test
questions set up in the Section 15.4 MULTIPLE
CHOICE SELF-QUIZ.
4 Compare your solutions with Section 15.5
MULTIPLE CHOICE SELF-QUIZ ANSWER.
5 If any of your answers are wrong, study
the reference indicated, until you understand
the material and is able to answer the
examination questions.
15.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 A message is sent to outgoing assistance because
of different reasons.
Which one of the following possibilities is wrong?
a. Known RI
b. No RI of prober classification
c. Too manu RIs
d. Unknown RI
15.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 a. MSO Operation Manual
- section: Outgoing
Message Service
Assistance
16 ̲I̲N̲C̲O̲M̲I̲N̲G̲ ̲M̲E̲S̲S̲A̲G̲E̲ ̲A̲S̲S̲I̲S̲T̲A̲N̲C̲E̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲X̲ ̲ ̲ ̲
16.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to modify incoming messages, which are sent for
assistance.
Time Frame: XX hours
16.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
MSO Operation Manual Section: MSO Menu
- section: Incoming Message Service Assistance (IMAS)
16.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 16.2-1, locate OMAS.
2 Study the referenced section and to the procedures
described step-by-step in the operation manual
by selecting OMAS.
3 Complete this part by answering the self-test questions
set up in the Section 16.4 MULTIPLE CHOICE SELF-QUIZ.
4 Compare your solutions with Section 16.5 MULTIPLE
CHOICE SELF-QUIZ.
5 If any of your answers are wrong, study the reference
indicated, until you understand the material and
is able to answer the examination questions.
16.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 In how many different actions can the system split
up a message presented from the incoming message
service queue?
a. 2
b. 3
c. 4
d. 5
16.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 a. MSO Operation Manual
- section: Incoming
Message Service
Assistance
17 S̲E̲R̲V̲I̲C̲E̲ ̲M̲E̲S̲S̲A̲G̲E̲S̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲X̲ ̲ ̲ ̲
17.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to prepare service messages.
17.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
MDCO Operation Manual
MSO Operation Manual
- section: Security Procedures
- section: Service Message Preparation
- section: Service Message Preparation Neby (SMPR)
with the subsections:
- Prepare New Plaindress Message (PRPF)
- Prepare New Abbreviated Plaindress Message
(PRAP)
- Prepare New Abbreviated Service Message
(PRAS)
- Continue Plaindress Preparation (CPFP)
- Continue Abbreviated Plaindress Preparation
(CAPP)
- Continue Abbreviated Service Message Preparation
(CACP)
- Prepare New Comment (PRNC)
- Continue Comment Preparation (CTCP)
- Delete Service Message (DESM)
- Outgoing Service Message Status
- section: Receive Message
17.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 17.2-1 or figure 17.2-2, locate the on-line
commands which are actual for this section.
2 Study the referenced section and do the procedures
described step-by-step in the operation manual.
3 Complete this part by answering the self-test questions
set up in the Section 17.4 MULTIPLE CHOICE SELF-QUIZ.
4 Compare your solutions with Section 17.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER:
5 If any of your answers are wrong, study the refeence
indicated until you understand the material and
is able to answer the examination questions.
17.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 Which mnemonic command is used to delete service
messages?
a. REDE
b. DESM
c. OSMS
d. PRAS
2 In which way do you call for a deferred service
message?
By means of a command and:
a. Transaction id
b. Originator id
c. Item reference id
d. Display id
3 How many different??
17.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b MDCO/MSO Operation
Manual
- section: Service
Message Deletion
2 c MDCO/MSO Operation
Manual
- section: Continue
Plaindress Preparation,
Continue Abbreviated
Plaindress Preparation,
Continue Abbreviated
Service Message
Preparation.
18 R̲E̲T̲R̲I̲E̲V̲A̲L̲ ̲O̲F̲ ̲M̲E̲S̲S̲A̲G̲E̲S̲ ̲
̲ ̲
̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲ ̲
̲S̲U̲P̲V̲:̲
̲ ̲ ̲ ̲ ̲ ̲
̲M̲D̲C̲O̲:̲
̲ ̲X̲ ̲ ̲ ̲
̲M̲S̲O̲
̲:̲ ̲ ̲X̲ ̲ ̲ ̲
18.1 L̲E̲A̲R̲N̲I̲N̲G̲ ̲O̲B̲J̲E̲C̲T̲I̲V̲E̲. After this section, you shall be
able to retrieve messages by means of different key
types.
18.2 S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
MDCO Operation Manual
MSO Operation Manual
- section: Security Procedures
- section: Message Handling Introduction
- section: Message Handling Menu (MSGH)
- section: Retrieval for Local Use (RELU)
- section: Retrieval for Readdressal (READ)
- section: Retrieval for Rerun (TERN)
- section: Retrieval for Redistribtuion (REDS)
- section: Retrieval for Deletion (REDE)
- section: Response Message Display (RESP)
18.3 A̲S̲S̲I̲G̲N̲M̲E̲N̲T̲S̲:
1 On figure 18.2-1 or figure 18.2-2 locate the on-line
commands which are actual for this section.
2 Study the referenced sections and do the procedures
described step-by-step in the operation manual.
3 Complete this part by answering the self-test questions
set up in the Section 18.4 MULTIPLE CHOICE SELF-QUIZ.
4 Compare your solutions with Section 18.5 MULTIPLE
CHOICE SELF-QUIZ ANSWER.
5 If any of your answers are wrong, study the reference
indicated until you understand the material and
is able to answer the examination questions.
18.4 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲
1 How many retrieve keys exist below "Retrieval for
Local Use"?
a. 3 keys
b. 5 keys
c. 7 keys
d. 9 keys
2 Only one key type is available for Deletion.
Which one?
a. key a
b. key b
c. key d
d. key G
18.5 M̲U̲L̲T̲I̲P̲L̲E̲ ̲C̲H̲O̲I̲C̲E̲ ̲S̲E̲L̲F̲-̲Q̲U̲I̲Z̲ ̲A̲N̲S̲W̲E̲R̲
Q̲U̲E̲S̲T̲I̲O̲N̲ C̲O̲R̲R̲E̲C̲T̲ ̲A̲N̲S̲W̲E̲R̲ S̲T̲U̲D̲Y̲ ̲R̲E̲F̲E̲R̲E̲N̲C̲E̲
1 b. MDCO/MSO Operation
Manual
- section: Retrieval
for Local Use
2 c. MDCO/MSO Operation
Manual
- section: Retrieval
for Deletion.…86…1
…02… …02… …02…
…02…
