top - download
⟦e547229a5⟧ Wang Wps File
Length: 8553 (0x2169)
Types: Wang Wps File
Notes: CPS/TMA/??? (Week 12)
Names: »4312A «
Derivation
└─⟦9753ba4d5⟧ Bits:30006173 8" Wang WCS floppy, CR 0253A
└─ ⟦this⟧ »4312A «
WangText
…00……00……00……00……00…4…0a……86…1 …02… …02… …02…
…02…4312A/ktd
…02…BJR/831117…02……02…#
STUDENT LABORATORY GUIDE
…02……02…CAMPS
WARNINGS:
1 If you are not in the User Menu, do not press ATTN.
2 Do not use SUSPEND. Use DEFER instead.
3 Do not insert (F2) lines in messages and do not
insert more than 10 lines in COMMENT. Do not use
F2 and F4 in T-TO-T COMMENT and VDU Display.
4 Do not press MASTER RESET or RESET.
5 Do not use PRINT (F3) in T-TO-T COMMENT and VDU
Display.
1 Sign On.
2 Prepare three comments, all of them for local distribution
to:
DSA AEC NUC DSB CRA NBC
Use the following classifications and precedences:
1 RESTRICTED IMMEDIATE
2 CONFIDENTIAL PRIORITY
3 SECRET ROUTINE
Send the two first comments and defer the third one.
3 Continue preparation of the third comment. Do you remember
the ITEM REF ID?
Use "OUTGOING MESSAGE/COMMENT STATUS" to find the number.
Print out the status report on the associated printer.
Send the comment.
4 Prepare a message with the following data:
CLASSIFICAION: SECRET
COORDINATION: One of the SCD's belonging to
your terminal.
LOCAL DISTRIBUTION: The same as for coordination.
FROM: NMR SHAPE CA
TO: ZEN/AB EINDHOVEN
INFO: ZEN/0153
ZEN/AIR TOUL
SIC: BSJ
EXER/OPER: OPER/RST-COURSE
Send the message for coordination.
5 Check outgoing status. Is it correct?
6 Do you have a message for coordination? If no, go to
step 4.
Receive the message and print it out.
Do you still have the same "INFO" line? Is the "INFO"
line still correct?
7 Change the "TO" line of the message you prepared to:
ZEN/COMMCEN COPENHAGEN.
Send the message for release.
8 Go to your release position and release your message.
9 Go back to your own position and read the release notification.
10 Check outgoing status. Is it correct?
11 Check delivery status. Do you have your own message
after local distribution?
If yes, receive it.
12 Retrieve the second comment.
13 Retrieve the message you have sent.
14 Delete the first comment.
15 Prepare a T-to-T comment. Send it to CCIS.
16 Prepare a VDU display. Use the name: BEER.
Do not send the VDU display, update the data base instead.
17 It is the last step, check outgoing and delivery status
and print them out on the printer.
E N D
1 Block the terminal with the TD:OPD by misspelling the
password three times. Open the terminal again from
the Supervisor position.
Did you get an error report on the Supervisor report
printer?
2 Make yourself a user profile with your own ID and password.
Set capabilities for preparation, reception, and release
to yes. Set exercise messages only to no. Set associated
release terminal to OPB.
3 Put yourself into the terminal profile for TD:OPC.
4 Try to sign-on with your ID at TD:OPC. If it is not
possible, check your user profile and the terminal
profile for TD:OPC.
5 Send two comments from another terminal to one of the
SCD's which are belonging to TD:OPC.
6 Block the queue for TD:OPC.
7 Send a comment from another terminal to one of the
SCD's which are belonging to TD:OPC.
Check the queue for TD:OPC, what happened?
8 Prepare a comment at TD:OPC. Instead of sending it,
defer it.
9 Delete a̲l̲l̲ the queues for TD:OPC. Check the queue status
for TD:OPC, what happened:
10 Try to receive comments at TD:OPC. What happened?
11 Try to continue preparation of the comment you deferred.
What happened?
12 Find out to which LTUX Line No. the report printer
for the Supervisor is connected, w̲i̲t̲h̲o̲u̲t̲ looking on
the cables.
1 Make a new text for MHI:ZZP. Go to TD:OPC and prepare
a message.
Check the MHI.
2 Protect the Security Control Command "SECC" by a Command
Code and a warning text.
Check it.
3 Print out all the AIGs.
4 Make a new security warning text. Set security interrogation
to RR. Set security warning to UU.
Check it.
5 Set quiet-hour terminal to TD:OPC. Send a comment from
TD:OPD with precedence: ZZ to a closed terminal.
What happened?
6 Make a new user profile.
7 Print out the password list.
8 Print out the system parameters.
9 Set statistic print to: OFF.
10 Suspend the retrieve function.
11 Set quiet-hour to: OFF.
12 Print out a terminal profile.
13 Print out a user profile.…86…1 …02… …02… …02… …02…
…0c…skrives ud uden hoved…0c…
U̲N̲S̲O̲L̲I̲C̲I̲T̲E̲D̲ ̲D̲I̲R̲E̲C̲T̲I̲V̲E̲S̲
- ILLEGAL ̲FUNCTION ̲KEY ENTRY
- CURSOR ̲NOT ̲POSITIONED ̲IN ̲FORMATTED ̲LINE
- TOP ̲LEVEL ̲MENU ̲ALREADY ̲DISPLAYED
- PARAMETER ̲1 ̲SYNTAX ̲ERROR
- PARAMETER ̲2 ̲SYNTAX ̲ERROR
- PARAMETER ̲3 ̲SYNTAX ̲ERROR
- PARAMETER ̲4 ̲SYNTAX ̲ERROR
- PARAMETER ̲1 ̲RANGE ̲ERROR
- PARAMETER ̲2 ̲RANGE ̲ERROR
- PARAMETER ̲3 ̲RANGE ERROR
- PARAMETER ̲4 ̲RANGE ̲ERROR
- CONFIRMATION ̲CODE ̲NOT ̲ENTERED
- CONFIRMATION ̲CODE ̲SYNTAX ̲ERROR
- ILLEGAL ̲CONFIRMATION ̲CODE
- CURSOR ̲NOT ̲POSITIONED ̲CORRECT ̲IN ̲DATA ̲ENTRY ̲FIELD
- COMMAND ̲CODE ̲SYNTAX ̲ERROR
- UNKNOWN ̲COMMAND
- MISSING ̲PARAMETER ̲OR ̲PEC
- TOO ̲MANY ̲PARAMETERS
- MISSING PARAMETERS
- PEC ̲SYNTAX ̲ERROR
- ILLEGAL ̲PEC
- TABLE ̲FULL
U̲N̲S̲O̲L̲I̲C̲I̲T̲E̲D̲ ̲D̲I̲R̲E̲C̲T̲I̲V̲E̲S̲ (cont'd)
- UNDEFINED ̲VDU
- UNDEFINED ̲DEVICE
- ATOMAL ̲PRINT ̲DEVICE
- DEDICATED ̲PUNCH ̲DEVICE
- DEDICATED ̲READER ̲DEVICE
- UNDEFINED ̲VDU ̲OR ̲DEVICE
- UNKNOWN ̲INCOMING ̲CHANNEL ̲DESIGNATOR
- UNKNOWN ̲OUTGOIND ̲CHANNEL ̲DESIGNATOR
- UNKNOWN ̲USER
- USER ̲SIGNED ̲ON
- TABLE ̲AND ̲OVERLOAD ̲AREA ̲FULL
- OVERLOAD ̲AREA ̲FULL
- PLA ̲REFERENCE ̲NO ̲IDENTIFIES ̲A ̲LOCAL ̲PLA
- PLA ̲REFERENCE ̲NO ̲IDENTIFIES ̲A ̲GLOBAL ̲PLA
- COMMAND ̲NOT ̲DEFINED ̲FOR ̲CURRENT ̲MODE
- NUMBER ̲OF ̲LINES ̲TOO ̲LARGE ̲OR ̲INSERTION ̲NOT ̲ALLOWED
- NUMBER ̲OF ̲LINES ̲TOO ̲LARGE ̲OR ̲DELETION ̲NOT ̲ALLOWED
- CAMPS ̲BUSY
- TABLE ̲ENTRY ̲EXISTS ̲BUT ̲ILLEGAL ̲TYPE
- TABLE ̲LOCKED
E̲R̲R̲O̲R̲ ̲C̲O̲D̲E̲S̲
E̲R̲R̲O̲R̲ ̲C̲O̲D̲E̲ E̲X̲P̲L̲A̲N̲A̲T̲I̲O̲N̲
100 RI ̲NOT ̲IN ̲EXTERNAL ̲RI ̲TABLE
101 EXTERNAL ̲RI ̲CIRCUIT ̲WAS ̲NOT ̲FOURN
102 SYSTEM ̲CODE ̲IN ̲CONFLICT ̲WITH ̲GLOBAL
103 DD ̲ALREADY ̲EXISTS ̲IN ̲TT
104 DD ̲ALREADY ̲EXISTS ̲IN ̲DT
105 UNKNOWN ̲TERMINAL ̲DESIGNATOR
106 UNKNOWN ̲DEVICE ̲DESIGNATOR
107 TYPE ̲IS ̲NOT ̲AS ̲SPECIFIED ̲IN ̲TERM ̲DEV ̲PROFILE
108 SCD ̲NOT ̲IN ̲TERMINAL ̲PROFILE
109 CD ̲ALREADY ̲EXISTS
110 DEVICEQ ̲NOT ̲BLKED ̲OR ̲EMPTY
111 NEW ̲DEV ̲PORT ̲ALREADY ̲EXISTS
112 DEVICE ̲TYPE ̲INCOMPATIBLE
113 CHANNEL ̲MUST ̲BE ̲DISCONNECTED ̲BEFORE ̲PROFILE
̲DELETION
114 UPDATE ̲NOT ̲ALLOWED ̲UNLESS ̲DISCONNECTED
115 CHANNEL ̲PORT ̲NOT ̲ENTERED
116 PORT ̲ID ̲DOES ̲NOT ̲EXIST
117 UNKNOWN ̲CIRCUIT
118 CIRC ̲NO ̲CANNOT ̲BE ̲CHANGED
119 TYPE ̲MISMATCH
E̲R̲R̲O̲R̲ ̲C̲O̲D̲E̲S̲ (cont'd)
E̲R̲R̲O̲R̲ ̲C̲O̲D̲E̲ E̲X̲P̲L̲A̲N̲A̲T̲I̲O̲N̲
120 CHANNEL ̲NOT ̲CONNECTED ̲YET
121 UNKNOWN ̲SDL
122 SDL ̲LIST ̲IS ̲EMPTY
123 AT ̲LEAST ̲ONE ̲SDL ̲MUST ̲BE ̲SPECIFIED
124 PLA ̲IS ̲ASSOCIATED ̲WITH ̲ANOTHER ̲PLA ̲REF
125 PLA ̲CANNOT BE CHANGED
126 SCD ̲NOT ̲FOUND ̲IN ̲SCD ̲TABLE
127 NUMBER ̲OF ̲CONNECTED ̲CHANNELS ̲IS ̲NOT ̲0
128 NETWORK ̲DOES ̲NOT ̲CORRESPOND ̲TO ̲CIRCUIT ̲TYPE
129 NO ̲CAPABILITY ̲SPECIFIED
130 TERMINAL ̲DOES ̲NOT ̲HAVE ̲RELEASE ̲CAPABILITY
131 EXPIRES ̲MUST ̲BE ̲0 ̲WHEN SUPERVISOR
132 PLA ̲ASSOCIATED ̲ANOTHER ̲GLOBAL ̲PLA ̲REF
133 PLA ̲ASSOCIATED ̲A ̲LOCAL ̲PLA ̲REF
134 UNKNOWN ̲RI
135 FIRST ̲RI ̲MUST ̲BE ̲EITHER ̲NICS ̲TARE ̲SCARS ̲OR
̲CCIS
136 IF ̲RI ̲IS ̲SCARS ̲OR ̲CCIS ̲ONLY ̲ONE ̲RI ̲IS ̲ALLOWED
137 RI ̲CIRCUIT ̲TYPE ̲MUST ̲BE ̲TRC ̲PTOP
138 GLOBAL ̲PLA ̲TABLE ̲CONFLICT
