top - download
⟦f808d82ab⟧ Wang Wps File
Length: 3812 (0xee4)
Types: Wang Wps File
Notes: CPS/TCM/004
Names: »2005A «
Derivation
└─⟦780c36067⟧ Bits:30006094 8" Wang WCS floppy, CR 0146A
└─ ⟦this⟧ »2005A «
WangText
…02…CPS/TCM/004
…02…CSV/820813…02……02…#
MAINS
SWITCH
2 x 240V,
CR 8108-/240--/00
TECHNICAL
MANUAL…02……02…CAMPS
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
1 INTRODUCTION ..................................
4
1.1 MODULE STATUS ..............................
5
2 DESCRIPTION ...................................
8
2.1 OPERATING INSTRUCTION ......................
8
2.2 ELECTRICAL SPEC. ...........................
9
2.3 MECHANICAL SPEC. ...........................
9
3 BLOCKED SCHEMATIC .............................
10
4. PARTS LIST .....................................
12
5 MECHANICAL DRAWINGS ............................
16
1̲ ̲ ̲I̲N̲T̲R̲O̲D̲U̲C̲T̲I̲O̲N̲
The Mains Switch CR 8108-/240--/00 is designed to support
two mains lines with power switch, Fuse, time counter
and a transformer making 220V output voltage.
The Mains Switch is designed for 19" Rack Mounting.
Figure 1-1 MAINS SWITCH CR8108-/240--/00
1.1 M̲O̲D̲U̲L̲E̲ ̲S̲T̲A̲T̲U̲S̲
Ref. CIRR CPS/LST/017
2 D̲E̲S̲C̲R̲I̲P̲T̲I̲O̲N̲
2.1 O̲P̲E̲R̲A̲T̲I̲N̲G̲ ̲I̲N̲S̲T̲R̲U̲C̲T̲I̲O̲N̲
Figure 2.1-1 MAINS SWITCH FRONT/REAR VIEW
The Mains Switch CR 8108-/240--/00 contain two identical
separated circuits. The components for each circuit
is located in the same side of the Mains Switch Cabinet.
1. Mains Switch including an auto fuse.
2. Elapsed Time counter, count the hours with mains
out.
3. Power Indicator, lights when there is mains out.
4. Power inlet (jack J1 and J4). The ground terminal
is connected to the mains switch cabinet.
5. Power Outlet (jack J2 and J3). The ground terminal
is connected to the mains switch cabinet.
6. Ground Wire, connects to Protection Ground.
2.2 E̲L̲E̲C̲T̲R̲I̲C̲A̲L̲ ̲S̲P̲E̲C̲.̲
The Mains Switch CR 8108/240 is designed to give an
output voltage of 220V for an input voltage of 240V.
As power switch is used an 10 Amp. slow auto fuse.
The power switch is a double type both disconnecting
Line and Neutral.
In and Outgoing Power is to be connected to the jackets
on the rear panel.
Input Voltage: 2 x 240 VAC
Output Voltage: 2 x 220 VAC
Output Current: max 10A
Mains Frequency: 50 Hz + 10% / - 10%
Ambient Temperature: 0-50…0e…o…0f…C
2.3 M̲E̲C̲H̲A̲N̲I̲C̲A̲L̲ ̲S̲P̲E̲C̲.
The Mains Switch CR 8108/240 is designed for 19" rack
mounting.
Dimensions:
H: 133 mm (3U)
W: 482 mm (19")
D: 400 mm (including handles)
Weight: 12,5 kg.
3 B̲L̲O̲C̲K̲E̲D̲ ̲S̲C̲H̲E̲M̲A̲T̲I̲C̲
Ref. DWG.: No. 2-2879
4 P̲A̲R̲T̲S̲ ̲L̲I̲S̲T̲
Ref.: 4.07024-00
5 M̲E̲C̲H̲A̲N̲I̲C̲A̲L̲ ̲D̲R̲A̲W̲I̲N̲G̲S̲
Dwg. No. 1-154 Mains Switch Assembly dwg.
Dwg. No. 1-156 Mains Switch Assembly dwg.
