top - download
⟦f8671ad08⟧ Wang Wps File
Length: 8769 (0x2241)
Types: Wang Wps File
Notes: clarification nr 26
Names: »0921A «
Derivation
└─⟦d10d3ed68⟧ Bits:30006014 8" Wang WCS floppy, CR 0055A
└─ ⟦this⟧ »0921A «
WangText
- # -
APPENDIX A
T̲A̲B̲L̲E̲ ̲O̲F̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
1 LOG OF VDU TRANSACTIONS
1.1 DENOTATION OF LOG FIELD CONTENTS - GENERAL
1.2 LOG OF USER TRANSACTIONS
l.2.1 Denotation of Log Field Contents - Special
Cases
1.3 LOG OF SECURITY PROCEDURES
l.3.1 Denotation of Log Field Contents - Special
Cases
1.4 LOG OF SUPERVISORY TRANSACTIONS
2 LOG OF PRINTER, PTP, AND OCR TRANSACTIONS
3 LOG RECORDS RELATED TO RECEPTION/TRANSMISSION OF
MESSAGES
3.1 DENOTATION OF LOG FIELD CONTENTS
3.2 LOG RECORDS RELATED TO NICS TARE/TRC/POINT-TO-
POINT/PTR
3.2.1 Detonation of Log Field Contents - Special
Cases
4 PRINT LAY-OUT
1̲ ̲ ̲L̲O̲G̲ ̲O̲F̲ ̲V̲D̲U̲ ̲T̲R̲A̲N̲S̲A̲C̲T̲I̲O̲N̲S̲
In this section the log records to be created for VDU
transactions are defined.
For each transaction the associated format and the
exact contents of the log record is shown in a tabular
form.
The denotation of the indicated field designators is
described in section 1.1. If a field content denotes
something special for a specific transaction this is
listed immediately after the tabular description of
the log records for each type of VDU transaction, i.e.
user, security, supervisory.
1.1 D̲E̲N̲O̲T̲A̲T̲I̲O̲N̲ ̲O̲F̲ ̲L̲O̲G̲ ̲F̲I̲E̲L̲D̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲ ̲-̲ ̲G̲E̲N̲E̲R̲A̲L̲
Terminal Designator: 3 alpha characters identifying
the terminal.
Transaction Serial No.: 3 digit number, incremented
by one for each new transaction.
Format id: Identification of the format
being used.
Log time: Time of the log event itself.
Item ref. id: Identification of the created/accessed
item
Exit cause: A code indicating, what caused
the transaction (use of format)
to terminate.
Classificaton: Classification of the created/accessed
item.
Special handling cat.: Security related special handling
category of the created/accessed
item.
Start time of trans.: The time at which the transaction
was initiated.
Month + day: Month and day of month at
which a retrieved/appended
item was stored.
Decision code: A code indicating, which decision
a release officer took with
respect to a message sent
for release.
1.2 L̲O̲G̲ ̲O̲F̲ ̲U̲S̲E̲R̲ ̲T̲R̲A̲N̲S̲A̲C̲T̲I̲O̲N̲S̲
The contents of log records for user transactions are
defined in table 1.2.
1.2.1 D̲e̲n̲o̲t̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲L̲o̲g̲ ̲F̲i̲e̲l̲d̲ ̲C̲o̲n̲t̲e̲n̲t̲s̲ ̲-̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲C̲a̲s̲e̲s̲
Format M: The second "Item ref id" identifies the
Stored predefined message used for preparation
of the item identified by the first "Item
ref id" listed. (Message type).
Format O: Trans. ser no. is identical to that of
the transaction from which the append is
requested, i.e. from the corresponding
format A or C1.
If the message of which part shall be appended
to the message under preparation
a) resides on the off-line database both
an initial and final log record shall
be created.
b) resides on the on-line data base and
is available for appending only a final
log record shall be created.
c) is unknown to the system, cannot be
accessed by the user or cannot due
to security be appended only on initial
log record shall be created.
table 1.2
Format H: If the message/catalog requested to be
retrieved:
a) resides on the off-line data base both
an initial and final log record shall
be created.
b) resides on the on-line data base and
is presented to the user only a final
log record shall be created.
c) is unknown to the system, cannot be
accessed by the user etc. only an initial
log record shall be created.
Second "item ref id" contains the transaction
serial no. applicable to the retrieval
request if the retrieval was from the off-line
database.
Format D: First "item ref id" refers to the message
itself, i.e. the message for which release
is requested.
If the release officer did make a release
decision the
- second "Item ref id" refers to the
release notifiction (format F)
- the decision code indicates the decision
taken, i.e. release, defer, reject.
Format F: The first "Item ref id" refers to the message
to which the release notification is related.
Second "Item ref. id" refers to the release
notification itself.
Dummy: This log record will be generated if a
presentation request is denied due to an
unsuccessful security interrogation, i.e
When the user requests the next message
to be presented from either the display
queue, the release queue or the response
queue, a dummy log record will be created
by the application process. However,
this log record will only be reported/stored
to the log system if the terminal operating
system due to an unsuccessful security
interrogation blocks the terminal or
signs-off the user.
Format id: Indicates the queue release,
response, or receive from
which the msg was requested.
1.3 L̲O̲G̲ ̲O̲F̲ ̲S̲E̲C̲U̲R̲I̲T̲Y̲ ̲P̲R̲O̲C̲E̲D̲U̲R̲E̲S̲
The contents of log records for security procedures
are defined in table 1.3.
1.3.1 D̲e̲n̲o̲t̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲L̲o̲g̲ ̲F̲i̲e̲l̲d̲ ̲C̲o̲n̲t̲e̲n̲t̲s̲ ̲-̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲C̲a̲s̲e̲s̲
Format I1, Trans. ser. no: the serial no. of the trans-
I2: action to which the interrogation/warning
is related.
Format I1: User id: if the interrogation was successful
this field will contain the user id otherwise
the field will be empty.
figure
1.4 L̲O̲G̲ ̲O̲F̲ ̲S̲U̲P̲E̲R̲V̲I̲S̲O̲R̲Y̲ ̲T̲R̲A̲N̲S̲A̲C̲T̲I̲O̲N̲S̲
The contents of log records for Supervisory transactions
are defined in table 1.4.
2̲ ̲ ̲L̲O̲G̲ ̲O̲F̲ ̲P̲R̲I̲N̲T̲E̲R̲,̲ ̲P̲T̲P̲,̲ ̲A̲N̲D̲ ̲O̲C̲R̲ ̲T̲R̲A̲N̲S̲A̲C̲T̲I̲O̲N̲S̲
The contents of log records for Printer, PTP and OCR
transactions are defined in table 2.
Table 1.4
table 2
3̲ ̲ ̲L̲O̲G̲ ̲R̲E̲C̲O̲R̲D̲S̲ ̲R̲E̲L̲A̲T̲E̲D̲ ̲T̲O̲ ̲R̲E̲C̲E̲P̲T̲I̲O̲N̲/̲T̲R̲A̲N̲S̲M̲I̲S̲S̲I̲O̲N̲ ̲O̲F̲ ̲M̲E̲S̲S̲A̲G̲E̲
In this section log records related to reception/ transmission
of messages are defined. For each channel and message
type the exact contents of the log record is shown
in a tabular form.
The denotation of the indicated field designators is
described in section 3.1.
3.1 D̲E̲N̲O̲T̲A̲T̲I̲O̲N̲ ̲O̲F̲ ̲L̲O̲G̲ ̲F̲I̲E̲L̲D̲ ̲C̲O̲N̲T̲E̲N̲T̲S̲
Channel designator: 3 alpha characters identifying
the channel
Channel serial number: 4 digit number identical to
the received channel serial
number.
Message type. Identification of the message
received/transmitted
Log time: Time of the log event itself
Item reference identity: Identification of the received/transmitted
item
Precedence: Precedence of the received/transmitted
message
Calling station: Routing indicator of station
preparing message for transmission
Station serial number: 4 digit number
Filing time: Time of release (Julian Date
Time)
Classification: Classification of the received/transmitted
message
Special Handling: Special handling category
of the received/transmitted
message
SICs: The SICs determined by analysis
of line 12b of the message
Problem code: A code indicating the reason
for requesting message service.
Expected station serial 4 digit number identical to
number: the expected channel serial
number.
3.2 L̲O̲G̲ ̲R̲E̲C̲O̲R̲D̲S̲ ̲R̲E̲L̲A̲T̲E̲D̲ ̲T̲O̲ ̲N̲I̲C̲S̲ ̲T̲A̲R̲E̲/̲T̲R̲C̲/̲P̲O̲I̲N̲T̲ ̲T̲O̲ ̲P̲O̲I̲N̲T̲/̲P̲T̲R̲
The contents of log records for NICS TARE/TRC/Point
to Point/PTR are defined in table 3.
Table 3
3.2.1 D̲e̲n̲o̲t̲a̲t̲i̲o̲n̲ ̲o̲f̲ ̲L̲o̲g̲ ̲F̲i̲e̲l̲d̲ ̲C̲o̲n̲t̲e̲n̲t̲s̲ ̲-̲ ̲S̲p̲e̲c̲i̲a̲l̲ ̲C̲a̲s̲e̲s̲
Incoming messages: Log time is identical to time
of reception of the "end-of-message"
Outgoing messages: Log time is identical to time
of transmission of the "start-of-message".
Deletion: Time of deletion is identical
to log time.
4̲ ̲ ̲P̲R̲I̲N̲T̲ ̲L̲A̲Y̲-̲O̲U̲T̲
In table 4-1 and 4-2 the Print formats for log records
are shown.
table 4-1
table 4-2
