DataMuseum.dk

Presents historical artifacts from the history of:

CR80 Wang WCS documentation floppies

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about CR80 Wang WCS documentation floppies

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦f94c38696⟧ Wang Wps File

    Length: 2568 (0xa08)
    Types: Wang Wps File
    Notes: Spelunked
    Names: »~ORPHAN02.03«

Derivation

└─⟦c333b847f⟧ Bits:30005811 8" Wang WCS floppy, CR 0118A
    └─ ⟦this⟧ »~ORPHAN02.03« 

WangText

ed. OCD is reserved, and ITS Buffer and IO Buffer are used. They are, however, released
 each time a single CIF has been dumped, in order to allow other commands to be processed
 in parallel. Disk Access to STS, ITS and Dump File, and to OCD.


         C̲a̲l̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         DUMP ̲CIF ̲SEQUENCE

         C̲o̲m̲p̲l̲e̲t̲i̲o̲n̲ ̲C̲o̲d̲e̲s̲

         not dumpfile
         not initiated
         dump error
         DCM error codes



4.2.3.7.4    T̲e̲r̲m̲i̲n̲a̲t̲e̲ ̲D̲u̲m̲p̲

         F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         The pocedure performs the TERMINATE DUMP Command. Operation
         must contain command parameters at call. REPLY and
         CC are updated. OCD is reserved and ITS Buffer is used.
         Disk Access to Dump File.




         C̲a̲l̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         TERMINATE ̲DUMP

         C̲o̲m̲p̲l̲e̲t̲i̲o̲n̲ ̲C̲o̲d̲e̲s̲

         not initiated
         dump error
         not dumpfile
         DCM error codes


4.2.3.7.5    C̲l̲e̲a̲r̲

         F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         The procedure performs the CLEAR command. Operation
         must contain command parameters at call. REPLY and
         CC are updated. OCD is reserved, and ITS Buffer is
         used. They are, however, released betweeneach CIF cleared,
         in order that other commands can be processed in parallel.
         Disk accesses to ITS and OCD.

         C̲a̲l̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         CLEAR



4.2.3.7.6    R̲e̲t̲r̲i̲e̲v̲e̲

         F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         The procedure performs the RETRIEVE command. Operation
         must cntain command parameters at call. REPLY and CC
         are updated. OCD is reserved, and ITS Buffer and IO
         Buffer are used. Disk accesses to STS, ITS, Dump File
         and OCD.

         C̲a̲l̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         RETRIEVE

         C̲o̲m̲p̲l̲e̲t̲i̲o̲n̲ ̲C̲o̲d̲e̲s̲

         view not found
         offline retrieval                  not dumpfile
         empty segment




4.2.3.7.7    U̲n̲l̲o̲a̲d̲

         F̲u̲n̲c̲t̲i̲o̲n̲a̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         The procedure unloads a CIF from STS to ITS, and updates
         OCD accordingly if applicable. Unload is performed,
         only if the CIF is permannt, has been checkpointed,
         and has been subject to at least one Store command.
         If the first two conditions but not the latter are
         fulfilled, the OCD entry is deleted.

         OCD and CIF must be reserved at call. They are not
         released by the procedure. IS Buffer and IO Buffer
         used during processing. Disk Accesses to ITS, STS and
         OCD.

         C̲a̲l̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         UNLOAD(CIFCB:                      CIF ̲CONTROL ̲BLOCK)



4.2.3.7.8    C̲o̲p̲y̲ ̲F̲i̲e̲l̲d̲s̲

         Th procedure performs the COPY ̲FIELDS command. REPLY,
         CC and ATTRIBUTES are updated.

         OCD is reserved, ITS ̲BUF and IO ̲BUF are used.

         C̲a̲l̲l̲ ̲S̲p̲e̲c̲i̲f̲i̲c̲a̲t̲i̲o̲n̲

         COPY ̲FIELDS

         C̲o̲m̲p̲l̲e̲t̲i̲o̲n̲ ̲C̲o̲d̲e̲s̲

         Copy not allowed