⟦70ba7138e⟧

TextFile

\input texinfo   @c -*-texinfo-*-
@setfilename graph.info
@settitle graph

@ifinfo
This file documents graph, a utility for creating plot files.

Copyright @copyright{} 1989 Free Software Foundation, Inc.
@end ifinfo

@titlepage
@sp 10
@center @titlefont{graph}
@sp 2
@center A utility for creating plot files
@sp 2
@vskip 0pt plus 1filll
Copyright @copyright{} 1989 Free Software Foundation
@end titlepage

@node Top, Options, , (dir)
@chapter The @code{graph} Utility
@code{graph} is a utility for creating plots from data.  It reads ascii
data and writes a plot with axes and labels.  You can specify labels and
ranges for the axes, and you can set the sizes and position of the plot
on the page.  Each invocations of graph produces a single box with a set
of axes and data draw within.  You can place an arbitrary number of
plots on the page by concatenating the plot output of each
invocation.@refill

@menu
* Options::	     Command line options for graph.
* Graph Examples::   How to use graph.
* plot2ps::          A GNU plot to postscript conversion utility.
@end menu

@chapter Options at a glance
@table @samp
@item Option:
Description:

@item -C
print copyright notice

@item -D
binary double precision data

@item -E
use extended plot file format

@item -H CHARACTER_HEIGHT
fractional height of characters

@item -I
binary integer data

@item -M [x|y] MARGIN
amount of margin between data and x or y axes.

@item -N TICKS
number of tick marks on each axis

@item -P SIZE
plot file coordinate range

@item -S SYMBOL_NUMBER SYMBOL_SIZE
draw symbols at each point

@item -T TICK_SIZE
fractional size of tick marks

@item -W CHARACTER_WIDTH
fractional width of characters

@item -X X_LABEL
label printed below the x axis

@item -Y Y_LABEL
label printed right of the y axis

@item -a STEP_SIZE LOWER_LIMIT
generate abscissa, read only y values

@item -b
break lines whenever x decreases

@item -c POINT_LABEL
default label printed at each point

@item -d
print debugging information

@item -g GRID_STYLE
draw a grid in the plot

@item -h HEIGHT
fractional height of the plot

@item -l TOP_LABEL
label printed above the plot

@item -m LINE_MODE
solid and dashed lines

@item -r RIGHT
move plot right by fractional amount

@item -s
save the screen - do not erase

@item -t
transpose x and y axes

@item -u UP
move plot up by fractional amount

@item -w WIDTH
fractional width of the plot

@item -x l LOWER_LIMIT UPPER_LIMIT
log scale, axis limits

@item -y l LOWER_LIMIT UPPER_LIMIT
log scale, axis limits 

@item -z
do not read data from standard input
@end table

@node Options, Graph Examples, Top, Top
@chapter Command Line Options
The following table describes each of the command line arguments to graph.
Each option which takes an argument is followed by the type and default
values of the argument in parentheses.

@table @samp
@item -C
Print out the GNU copyright notice.@refill
@item -D
Read double precision binary data rather than ascii data.
Since @code{graph} is generally I/O bound, this can decrease execution
time.@refill
@item -E
Use an extended plot file format. This provides automatic adjustment of
labels with respect to tick marks.  The @samp{-H} and @samp{-W} options
are ignored if @samp{-E} is specified.  You will need the GNU plot
utility @code{plot2ps} in oder to print the output.@refill
@item -H
(double, default .03) The fractional height of printed characters.  This
value is used to adjust location of labels with respect to the tick
marks.@refill
@item -I
Read integer binary data rather than ascii data.@refill
@item -M @samp{[x|y]} @var{margin}
(double, default 0 for x and .05 for y) @var{margin} is the fractional
amount of margin between the data and the horizontal or vertical edges
of the box. A value of .05 for y produces a space which is 5% of the
height of the box, placed above and below the data.@refill
@item -M  
amount of margin between data and x or y axes.
@item -N @var{ticks}
(integer, default 5) @var{ticks} is the minimum number of tick marks for
each axis.  @code{graph} tries to pick as few digits as possible for
tick mark labels and uses at least this many tick marks.@refill
@item -P @var{size}
(integer, default 4096) @var{size} is the upper limit on coordinate
values in the plot file @code{graph} creates.  For devices with higher
resolution, this value can be increased.  A value of 4096 is sufficient
for 300 dot per inch devices such as laser writers.  This limit on the
values of coordinates (0 to @var{size}) output by @code{graph} is
rigidly enforced to prevent unpredictable behaviors by device drivers
such as @code{plot}.@refill
@item -S @var{symbol_number} @var{symbol_size}
(integer and float, defaults 0 and 0.01) Draw a symbol at each point in
the data. @var{symbol_number} specifies the shape of the symbol
according to the following table and @var{symbol_size} specifies the
fractional size of the symbol with respect to the height and width of
the plot.@refill
@table @asis
@item 0 no symbol
@item 1 plus sign
@item 2 cross
@item 3 diamond
@end table
@item -T @var{tick_size}
(float, default .01) @var{tick_size} is the fractional size of the tick
marks on each axis.  A value of 1.0 produces tick marks on the x (y)
axis whose length is equal to the width (height) of the plot.@refill
@item -W
(double, default .02) The fractional width of printed characters.  Like
the @samp{-H} option, this value is used to adjust location of labels
with respect to the tick marks.@refill
@item -X @var{x_label}
(string, default blank) @var{x_label} is a label printed below the x
axis.@refill
@item -Y @var{y_label}
(string, default blank) @var{y_label} is a label printed to the right of
the y axis.@refill
@item -a @var{step_size} @var{lower_limit}
(floats, defaults 1 and 0) Automaticly generate abscissa (x) values.
This option specifies that the data contains only ordinate (y) values.
@var{step_size} specifies the interval between neighboring points and
@var{lower_limit} specifies the first abscissa (x) value.@refill
@item -b
Break the lines in the graph whenever the abscissa (x) values
decrease.  Several curves with monotonically increasing abscissa
values can be concatenated and fed to graph using this option.@refill
@item -c @var{point_label}
(string, default blank) @var{point_label} is the default label placed at
each point in the plot when none is read from the input for that point.
That is, labels read from the input are printed instead of the default
whenever they are present.@refill
@item -d
Debugging information, including the data read in, is sent to the
standard error output.  This is useful for double checking binary data
files.@refill
@item -g @var{grid_style}
(integer, default 1) @var{grid_style} specifies the type of box framing
the plot and whether grid lines are drawn inside the box.@refill
@table @asis
@item 0 no box around plot, no axes, no labels.
@item 1 box around plot, axes with tick marks and labels.
@item 2 box containing a grid and axes with tick marks and labels.
@end table
@item -h @var{height}
(float, default 0.8) @var{height} specifies the fractional height of the
plot with respect to the height of the plotting area.  A value of 1.0
will produce a box which fills the available area.  Note that the tick
marks and labels are outside this area so that values less than 1.0 are
generally used.@refill
@item -l @var{top_label}
(string, default blank) @var{top_label} is a label placed above the
plot.@refill
@item -m @var{line_mode}
(integer, default 0) @var{line_mode} specifies the mode (or style) of
lines drawn between data points.@refill
@table @asis
@item 0 solid
@item 1 longdashed
@item 2 dotted
@item 3 disconnected
@item 4 dotdashed
@item 5 shortdashed
@end table
@item -r @var{right}
(float, default 0.1) Move the plot to the right by a fractional amount
@var{right} with respect to the width of the plotting area.  This
produces a margin on the left hand side of the plot.  A value of 0.5
will produce a margin half the width of the available area.  Note that
the tick marks and labels are drawn in the margin.@refill
@item -s
Save the screen. This option prevent graph from erasing the previous
contents of the graphics window or device.@refill
@item -t
Transpose the axes and axis labels. This option flips the plot over by
interchanging x and y values and labels.@refill
@item -u @var{up}
(float, default 0.1) Move the plot up by a fractional amount @var{up}
with respect to the height of the plotting area.  This produces a margin
below the plot.  A value of 0.5 will produce a margin half the height of
the available area.  Note that the tick marks and labels are drawn in
the margin.@refill
@item -w @var{width}
(float, default 0.8) @var{width} specifies the fractional width of the
plot with respect to the width of the plotting area.  A value of 1.0
will produce a box which fills the available area.  Note that the tick
marks and labels are outside this area, so values less than 1.0 are
generally used.@refill
@item -x @samp{l} @var{lower_limit} @var{upper_limit}
(char, floats) @samp{l} is optional and specifies that a logarithmic
scale be used for the x axis, by default a linear scale is used. The
arguments @var{lower_limit} and @var{upper_limit} specify the limits of
the x axis. By default the upper and lower limits are taken from the
data.@refill
@item -y @samp{l} @var{lower_limit} @var{upper_limit}
The arguments specify the scale and limits of the y axis as those do for
the x axis above.@refill
@item -z
Do not read data from the standard input.  You can specify input files
on the command line.  @code{graph} prints the file names and point
numbers when it encounters error in ascii input files. If input files are
named and contain one coordinate per line in the file axis whose length
is equal to the width (height) of the plot you can use the emacs
@code{next-error} function to locate the source of the error.@refill
@end table

@node Graph Examples, plot2ps, Options, Top
@chapter @code{graph} Examples

@section The format of input to @code{graph}
@code{graph} reads in ascii data.  Most often, the data is in the form
of pairs of x and y values:@refill
@example
0.0  0.0
1.0  0.2
2.0  0.0
3.0  0.4
4.0  0.2
5.0  0.6
@end example

You can add labels to specific data points by appending a string after
the  y coordinate.  The label ends at the end of the line:@refill
@example
3.0  0.4 this is a label for point (3.0, 0.4).
@end example

Using the @samp{-b} option, you can put more than one data set in the
input as long as each is monotonic in x values and decreases from the
end of one set to the start of the next:@refill
@example
0.0  0.0 first data set
2.0  0.0
4.0  0.2
0.0  0.1 second data set
2.0  0.2
4.0  0.3
@end example

If your data contains only y values which are equally sampled along the x
axis, you can use the @samp{-a} option to specify the x axis values
implicitly.@refill
@example
0.0
0.1
0.2 label for point (2.0, 0.2)
0.3
0.2
0.3
@end example

@section How to put multiple plots on one page
The command
@example
graph -h .4 -w .4 -r .1 -u .1 < ascii_data_file_1 >  plot_file
@end example

will put a single box containing the plot in the lower left hand
quarter of the page.  You can add another plot to the upper left hand
corner of the page using the command
@example
graph -h .4 -w .4 -r .1 -u .6 < ascii_data_file_2 >> plot_file
@end example

Likewise you can add plots to the right hand side of the page using
@example
graph -h .4 -w .4 -r .6 -u .1 < ascii_data_file_3 >> plot_file
graph -h .4 -w .4 -r .6 -u .6 < ascii_data_file_4 >> plot_file
@end example

@node plot2ps,, Graph Examples, Top
@section The @code{plot2ps} Utility

@code{plot2ps} is a utility for converting Unix plot files into
postscript.  The @code{plot2ps} utility reads plotting commands from
named files or the standard input and writes postscript to the standard
output.  You can then print the postscript output on a printer, or edit
it using the @code{idraw} graphics editor.  You can also easily include
the output in LaTeX documents using the @code{dvi2ps} utility and the
LaTeX command @code{psfig}.@refill

The source code and documentation for @code{plot2ps} and a more complete
description of this are available via anonymous ftp from qed.rice.edu
(128.42.4.38) in the directory @file{/pub}.
@contents
@bye
DataMuseum.dk

DKUUG/EUUG Conference tapes

⟦70ba7138e⟧ TextFile

Derivation

TextFile
