|
DataMuseum.dkPresents historical artifacts from the history of: DKUUG/EUUG Conference tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about DKUUG/EUUG Conference tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - downloadIndex: ┃ T s ┃
Length: 69264 (0x10e90)
Types: TextFile
Names: »sysdep.c«
└─⟦a0efdde77⟧ Bits:30001252 EUUGD11 Tape, 1987 Spring Conference Helsinki
└─ ⟦this⟧ »EUUGD11/gnu-31mar87/emacs/src/sysdep.c«
/* Interfaces to system-dependent kernel and library entries.
Copyright (C) 1985, 1986, 1987 Free Software Foundation, Inc.
This file is part of GNU Emacs.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY. No author or distributor
accepts responsibility to anyone for the consequences of using it
or for whether it serves any particular purpose or works at all,
unless he says so in writing. Refer to the GNU Emacs General Public
License for full details.
Everyone is granted permission to copy, modify and redistribute
GNU Emacs, but only under the conditions described in the
GNU Emacs General Public License. A copy of this license is
supposed to have been given to you along with GNU Emacs so you
can know your rights and responsibilities. It should be in a
file named COPYING. Among other things, the copyright notice
and this notice must be preserved on all copies. */
#include <signal.h>
#include "config.h"
#include "lisp.h"
#undef NULL
#define min(x,y) ((x) > (y) ? (y) : (x))
/* In this file, open, read and write refer to the system calls,
not our sugared interfaces sys_open, sys_read and sys_write.
Contrariwise, for systems where we use the system calls directly,
define sys_read, etc. here as aliases for them. */
#ifndef read
#define sys_read read
#define sys_write write
#endif /* `read' is not a macro */
#undef read
#undef write
#ifndef open
#define sys_open open
#else /* `open' is a macro */
#undef open
#endif /* `open' is a macro */
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
extern int errno;
#ifdef VMS
#include <rms.h>
#include <ttdef.h>
#include <tt2def.h>
#include <iodef.h>
#include <ssdef.h>
#include <descrip.h>
#include <ctype.h>
#define MAXIOSIZE ( 32 * PAGESIZE ) /* Don't I/O more than 32 blocks at a time */
#endif /* VMS */
#ifndef BSD4_1
#ifdef BSD /* this is done this way to avoid defined(BSD) || defined (USG)
because the vms compiler doesn't grok `defined' */
#include <fcntl.h>
#endif
#ifdef USG
#include <fcntl.h>
#endif
#endif /* not 4.1 bsd */
#ifdef BSD
#include <sys/ioctl.h>
#ifdef BSD4_1
#include <wait.h>
#else /* not 4.1 */
#include <sys/wait.h>
#endif /* not 4.1 */
#endif /* BSD */
#ifdef STRIDE
#include <sys/ioctl.h>
#endif
/* Get rid of LLITOUT in 4.1, since it is said to stimulate kernel bugs. */
#ifdef BSD4_1
#undef LLITOUT
#define LLITOUT 0
#endif /* 4.1 */
#ifdef HAVE_TERMIO
#include <termio.h>
#undef TIOCGETP
#define TIOCGETP TCGETA
#undef TIOCSETN
#define TIOCSETN TCSETA
#undef TIOCSETP
#define TIOCSETP TCSETAF
#define TERMINAL struct termio
#define OSPEED(str) (str.c_cflag & CBAUD)
#define TABS_OK(str) ((str.c_oflag & TABDLY) != TAB3)
#endif /* HAVE_TERMIO */
#ifndef HAVE_TERMIO
#ifndef VMS
#include <sgtty.h>
#define TERMINAL struct sgttyb
#define OSPEED(str) str.sg_ospeed
#define TABS_OK(str) ((str.sg_flags & XTABS) != XTABS)
#undef TCSETAW
#define TCSETAW TIOCSETN
#endif /* not VMS */
#endif /* not HAVE_TERMIO */
#ifdef USG
#include <sys/utsname.h>
#include <memory.h>
#include <string.h>
#ifdef HAVE_TIMEVAL
#ifdef HPUX
#include <time.h>
#else
#include <sys/time.h>
#endif
#endif /* HAVE_TIMEVAL */
#endif /* USG */
#ifdef VMS
#include "window.h"
#endif
#include "termhooks.h"
#include "termchar.h"
#include "termopts.h"
#include "dispextern.h"
#ifdef NONSYSTEM_DIR_LIBRARY
#include "ndir.h"
#endif /* NONSYSTEM_DIR_LIBRARY */
/* Define SIGCHLD as an alias for SIGCLD. There are many conditionals
testing SIGCHLD. */
#ifndef VMS
#ifdef SIGCLD
#ifndef SIGCHLD
#define SIGCHLD SIGCLD
#endif /* not SIGCHLD */
#endif /* SIGCLD */
#endif /* not VMS */
static int baud_convert[] =
#ifdef BAUD_CONVERT
BAUD_CONVERT;
#else
{
0, 50, 75, 110, 135, 150, 200, 300, 600, 1200,
1800, 2400, 4800, 9600, 19200, 38400
};
#endif
extern short ospeed;
#ifdef VMS
static struct iosb
{
short status;
short offset;
short termlen;
short term;
} input_iosb;
int kbd_input_ast ();
int waiting_for_ast;
int stop_input;
int input_ef = 0;
int timer_ef = 0;
int process_ef = 0;
int input_eflist;
int timer_eflist;
static int input_chan;
static $DESCRIPTOR (input_dsc, "TT");
static int terminator_mask[2] = { 0, 0 };
static struct sensemode {
short status;
unsigned char xmit_baud;
unsigned char rcv_baud;
unsigned char crfill;
unsigned char lffill;
unsigned char parity;
unsigned char unused;
char class;
char type;
short scr_wid;
unsigned long tt_char : 24, scr_len : 8;
unsigned long tt2_char;
} sensemode_iosb;
#define TERMINAL struct sensemode
#define OSPEED(str) (str.xmit_baud)
#define TABS_OK(str) ((str.tt_char & TT$M_MECHTAB) != 0)
#endif /* VMS */
discard_tty_input ()
{
TERMINAL buf;
if (noninteractive)
return;
#ifdef VMS
end_kbd_input ();
SYS$QIOW (0, input_chan, IO$_READVBLK|IO$M_PURGE, input_iosb, 0, 0,
&buf, 0, 0, terminator_mask, 0, 0);
queue_kbd_input ();
#else /* not VMS */
ioctl (0, TIOCGETP, &buf);
ioctl (0, TIOCSETP, &buf);
#endif /* not VMS */
}
#ifdef SIGTSTP
stuff_char (c)
char c;
{
/* Should perhaps error if in batch mode */
#ifdef TIOCSTI
ioctl (0, TIOCSTI, &c);
#else /* no TIOCSTI */
error ("Cannot stuff terminal input characters in this version of Unix.");
#endif /* no TIOCSTI */
}
#endif /* SIGTSTP */
init_baud_rate ()
{
TERMINAL sg;
if (noninteractive)
ospeed = 0;
else
{
#ifdef VMS
SYS$QIOW (0, input_chan, IO$_SENSEMODE, &sg, 0, 0,
&sg.class, 12, 0, 0, 0, 0 );
#else
ioctl (0, TIOCGETP, &sg);
#endif /* not VMS */
ospeed = OSPEED (sg);
}
baud_rate = ospeed == 0 ? 1200
: ospeed < sizeof baud_convert / sizeof baud_convert[0]
? baud_convert[ospeed] : 9600;
}
set_exclusive_use (fd)
int fd;
{
#ifdef FIOCLEX
ioctl (fd, FIOCLEX, 0);
#endif
/* Ok to do nothing if this feature does not exist */
}
#ifndef subprocesses
wait_without_blocking ()
{
#ifdef BSD
wait3 (0, WNOHANG | WUNTRACED, 0);
#else
croak ("wait_without_blocking");
#endif
}
#endif /* not subprocesses */
int wait_debugging; /* Set nonzero to make following function work under dbx
(at least for bsd). */
/* Wait for subprocess with process id `pid' to terminate and
make sure it will get eliminated (not remain forever as a zombie) */
wait_for_termination (pid)
int pid;
{
while (1)
{
#ifdef subprocesses
#ifdef BSD
/* Note that kill returns -1 even if the process is just a zombie now.
But inevitably a SIGCHLD interrupt should be generated
and child_sig will do wait3 and make the process go away. */
/* There is some indication that there is a bug involved with
termination of subprocesses, perhaps involving a kernel bug too,
but no idea what it is. Just as a hunch we signal SIGCHLD to see
if that causes the problem to go away or get worse. */
#ifdef BSD4_1
extern int synch_process_pid;
sighold (SIGCHLD);
if (synch_process_pid == 0)
{
sigrelse (SIGCHLD);
break;
}
if (wait_debugging)
sleep (1);
else
sigpause (SIGCHLD);
#else /* not BSD4_1 */
sigsetmask (1 << (SIGCHLD - 1));
if (0 > kill (pid, 0))
{
sigsetmask (0);
kill (getpid (), SIGCHLD);
break;
}
#ifdef APOLLO
sleep (1);
#else /* not APOLLO */
if (wait_debugging)
sleep (1);
else
sigpause (0);
#endif /* not APOLLO */
#endif /* not BSD4_1 */
#else /* not BSD */
#ifdef UNIPLUS
if (0 > kill (pid, 0))
break;
wait (0);
#else /* neither BSD nor UNIPLUS: random sysV */
if (0 > kill (pid, 0))
break;
pause ();
#endif /* not UNIPLUS */
#endif /* not BSD */
#else /* not subprocesses */
#ifndef BSD4_1
if (0 > kill (pid, 0))
break;
wait (0);
#else /* BSD4_1 */
int status;
status = wait (0);
if (status == pid || status == -1)
break;
#endif /* BSD4_1 */
#endif /* not subprocesses */
}
}
#ifdef subprocesses
/*
* flush any pending output
* (may flush input as well; it does not matter the way we use it)
*/
flush_pending_output (channel)
int channel;
{
#ifdef TCFLSH
ioctl (channel, TCFLSH, 1);
#else
#ifdef TIOCFLUSH
int zero = 0;
/* 3rd arg should be ignored
but some 4.2 kernels actually want the address of an int
and nonzero means something different. */
ioctl (channel, TIOCFLUSH, &zero);
#endif
#endif
}
/* Set up the terminal at the other end of a pseudo-terminal that
we will be controlling an inferior through.
It should not echo or do line-editing, since that is done
in Emacs. No padding needed for insertion into an Emacs buffer. */
child_setup_tty (out)
int out;
{
TERMINAL s;
ioctl (out, TIOCGETP, &s);
#ifdef HAVE_TERMIO
s.c_oflag |= OPOST; /* Enable output postprocessing */
s.c_oflag &= ~ONLCR; /* Disable map of NL to CR-NL on output */
s.c_oflag &= ~(NLDLY|CRDLY|TABDLY|BSDLY|VTDLY|FFDLY); /* No output delays */
s.c_lflag &= ~ECHO; /* Disable echo */
s.c_lflag |= ISIG; /* Enable signals */
s.c_iflag &= ~IUCLC; /* Disable map of upper case to lower on input */
s.c_oflag &= ~OLCUC; /* Disable map of lower case to upper on output */
/* said to be unnecesary
s.c_cc[VMIN] = 1; /* minimum number of characters to accept
s.c_cc[VTIME] = 0; /* wait forever for at least 1 character
*/
s.c_lflag |= ICANON; /* Enable erase/kill and eof processing */
s.c_cc[VEOF] = 04; /* insure that EOF is Control-D */
s.c_cc[VERASE] = 0377; /* disable erase processing */
s.c_cc[VKILL] = 0377; /* disable kill processing */
#ifdef HPUX
s.c_cflag = (s.c_cflag & ~CBAUD) | B9600; /* baud rate sanity */
#endif HPUX
#else /* not HAVE_TERMIO */
s.sg_flags &= ~(ECHO | CRMOD | ANYP | ALLDELAY | RAW | LCASE | CBREAK | TANDEM);
#endif /* not HAVE_TERMIO */
ioctl (out, TIOCSETN, &s);
#ifdef BSD4_1
if (interrupt_input)
reset_sigio ();
#endif /* BSD4_1 */
#ifdef MASSCOMP
{
int zero = 0;
ioctl (out, FIOASYNC, &zero);
}
#endif /* MASSCOMP */
}
#endif /* subprocesses */
setpgrp_of_tty (pid)
int pid;
{
#ifdef TIOCSPGRP
ioctl (0, TIOCSPGRP, &pid);
#else
/* Just ignore this for now and hope for the best */
#endif
}
/* Suspend the Emacs process; give terminal to its superior. */
sys_suspend ()
{
#ifdef VMS
unsigned long parent_id;
parent_id = getppid ();
if (parent_id && parent_id != 0xffffffff)
return LIB$ATTACH (&parent_id) & 1;
return -1;
#else
#ifdef SIGTSTP
kill (0, SIGTSTP);
#else
#ifdef USG_JOBCTRL /* If you don't know what this is don't mess with it */
ptrace (0, 0, 0, 0); /* set for ptrace - caught by csh */
kill (getpid (), SIGQUIT);
#else
/* On a system where suspending is not implemented,
instead fork a subshell and let it talk directly to the terminal
while we wait. */
int pid = fork ();
int spid;
int status;
int (*interrupt) ();
int (*quit) ();
int (*term) ();
#ifdef SIGIO
int (*sigio*) ();
#endif SIGIO
if (pid == -1)
error ("Can't spawn subshell");
if (pid == 0)
{
char *sh;
sh = (char *) egetenv ("SHELL");
if (sh == 0)
sh = "sh";
/* Use our buffer's default directory for the subshell. */
{
Lisp_Object dir;
unsigned char *str;
int len;
/* mentioning bf_cur->buffer would mean including buffer.h,
which somehow wedges the hp compiler. So instead... */
dir = intern ("default-directory");
/* Can't use NULL */
if (XFASTINT (Fboundp (dir)) == XFASTINT (Qnil))
goto xyzzy;
dir = Fsymbol_value (dir);
if (XTYPE (dir) != Lisp_String)
goto xyzzy;
str = (unsigned char *) alloca (XSTRING (dir)->size + 2);
len = XSTRING (dir)->size;
bcopy (XSTRING (dir)->data, str, len);
if (str[len - 1] != '/') str[len++] = '/';
str[len] = 0;
chdir (str);
}
xyzzy:
execlp (sh, sh, 0);
write (1, "Can't execute subshell", 22);
_exit (1);
}
interrupt = (int (*)()) signal (SIGINT, SIG_IGN);
quit = (int (*)()) signal (SIGQUIT, SIG_IGN);
term = (int (*)()) signal (SIGTERM, SIG_IGN);
#ifdef SIGIO
sigio = (int (*)()) signal (SIGIO, SIG_IGN);
#endif /* SIGIO */
wait_for_termination (pid);
signal (SIGINT, interrupt);
signal (SIGQUIT, quit);
signal (SIGTERM, term);
#ifdef SIGIO
signal (SIGIO, sigio);
#endif /* SIGIO */
#endif /* no USG_JOBCTRL */
#endif /* no SIGTSTP */
#endif /* not VMS */
}
\f
#ifdef F_SETFL
int old_fcntl_flags;
init_sigio ()
{
#ifdef FASYNC
old_fcntl_flags = fcntl (0, F_GETFL, 0) & ~FASYNC;
#endif
request_sigio ();
}
reset_sigio ()
{
unrequest_sigio ();
}
#ifdef FASYNC /* F_SETFL does not imply existance of FASYNC */
request_sigio ()
{
fcntl (0, F_SETFL, old_fcntl_flags | FASYNC);
interrupts_deferred = 0;
}
unrequest_sigio ()
{
fcntl (0, F_SETFL, old_fcntl_flags);
interrupts_deferred = 1;
}
#else /* no FASYNC */
#ifdef STRIDE /* Stride doesn't have FASYNC - use FIOASYNC */
request_sigio ()
{
int on = 1;
ioctl (0, FIOASYNC, &on);
interrupts_deferred = 0;
}
unrequest_sigio ()
{
int off = 0;
ioctl (0, FIOASYNC, &off);
interrupts_deferred = 1;
}
#else /* not FASYNC, not STRIDE */
request_sigio ()
{
croak ("request_sigio");
}
unrequest_sigio ()
{
croak ("unrequest_sigio");
}
#endif /* STRIDE */
#endif /* FASYNC */
#endif /* F_SETFL */
\f
TERMINAL old_gtty; /* The initial tty mode bits */
int term_initted; /* 1 if outer tty status has been recorded */
#ifdef F_SETOWN
int old_fcntl_owner;
#endif /* F_SETOWN */
#ifdef TIOCGLTC
struct tchars old_tchars;
struct ltchars old_ltchars;
int old_lmode;
int lmode; /* Current lmode value. */
/* Needed as global for 4.1 */
#endif /* TIOCGLTC */
/* This may also be defined in stdio,
but if so, this does no harm,
and using the same name avoids wasting the other one's space. */
#ifdef USG
unsigned char _sobuf[BUFSIZ+8];
#else
char _sobuf[BUFSIZ];
#endif
init_sys_modes ()
{
TERMINAL sg;
#ifdef TIOCGLTC
struct tchars tchars;
static struct tchars new_tchars = {-1,-1,-1,-1,-1,-1};
static struct ltchars new_ltchars = {-1,-1,-1,-1,-1,-1};
#endif
#ifdef VMS
#if 0
static int oob_chars[2] = {0, 1 << 7}; /* catch C-g's */
extern int (*interrupt_signal) ();
#endif
#endif
if (noninteractive)
return;
#ifdef VMS
if (!input_ef)
LIB$GET_EF (&input_ef);
SYS$CLREF (input_ef);
waiting_for_ast = 0;
if (!timer_ef)
LIB$GET_EF (&timer_ef);
SYS$CLREF (timer_ef);
if (!process_ef)
LIB$GET_EF (&process_ef);
SYS$CLREF (process_ef);
if (input_ef / 32 != process_ef / 32)
croak ("Input and process event flags in different clusters.");
if (input_ef / 32 != timer_ef / 32)
croak ("Input and process event flags in different clusters.");
input_eflist = ((unsigned) 1 << (input_ef % 32)) |
((unsigned) 1 << (process_ef % 32));
timer_eflist = ((unsigned) 1 << (input_ef % 32)) |
((unsigned) 1 << (timer_ef % 32));
SYS$QIOW (0, input_chan, IO$_SENSEMODE, &old_gtty, 0, 0,
&old_gtty.class, 12, 0, 0, 0, 0);
#else /* not VMS */
ioctl (0, TIOCGETP, &old_gtty);
#endif /* not VMS */
if (!read_socket_hook)
{
sg = old_gtty;
#ifdef HAVE_TERMIO
sg.c_iflag |= (IGNBRK); /* Ignore break condition */
sg.c_iflag &= ~ICRNL; /* Disable map of CR to NL on input */
#ifdef ISTRIP
sg.c_iflag &= ~ISTRIP; /* don't strip 8th bit on input */
#endif
sg.c_lflag &= ~ECHO; /* Disable echo */
sg.c_lflag &= ~ICANON; /* Disable erase/kill processing */
sg.c_lflag |= ISIG; /* Enable signals */
if (flow_control)
{
sg.c_iflag |= IXON; /* Enable start/stop output control */
#ifdef IXANY
sg.c_iflag &= ~IXANY;
#endif /* IXANY */
}
else
sg.c_iflag &= ~IXON; /* Disable start/stop output control */
sg.c_oflag &= ~ONLCR; /* Disable map of NL to CR-NL on output */
sg.c_oflag &= ~TAB3; /* Disable tab expansion */
#ifdef CS8
sg.c_cflag |= CS8; /* allow 8th bit on input */
sg.c_cflag &= ~PARENB; /* Don't check parity */
#endif
sg.c_cc[VINTR] = '\007'; /* ^G gives SIGINT */
#ifdef HPUX
/* Can't use CDEL as that makes Meta-DEL do SIGQUIT.
Instead set up C-g for both; we handle both alike
so which one it really gives us does not matter. */
sg.c_cc[VQUIT] = '\007';
#else /* not HPUX */
sg.c_cc[VQUIT] = CDEL; /* Turn off SIGQUIT */
#endif /* not HPUX */
sg.c_cc[VMIN] = 1; /* Input should wait for at least 1 char */
sg.c_cc[VTIME] = 0; /* no matter how long that takes. */
#ifdef VSWTCH
sg.c_cc[VSWTCH] = CDEL; /* Turn off shell layering use of C-z */
#endif /* VSWTCH */
#else /* if not HAVE_TERMIO */
#ifdef VMS
sg.tt_char |= TT$M_NOECHO | TT$M_EIGHTBIT;
if (flow_control)
sg.tt_char |= TT$M_TTSYNC;
else
sg.tt_char &= ~TT$M_TTSYNC;
sg.tt2_char |= TT2$M_PASTHRU | TT2$M_XON;
#else /* not VMS (BSD, that is) */
sg.sg_flags &= ~(ECHO | CRMOD | XTABS);
sg.sg_flags |= ANYP;
sg.sg_flags |= interrupt_input ? RAW : CBREAK;
#endif /* not VMS (BSD, that is) */
#endif /* not HAVE_TERMIO */
#ifdef VMS
SYS$QIOW (0, input_chan, IO$_SETMODE, &input_iosb, 0, 0,
&sg.class, 12, 0, 0, 0, 0);
#else
ioctl (0, TIOCSETN, &sg);
#endif /* not VMS */
#ifdef F_SETFL
#ifdef F_GETOWN /* F_SETFL does not imply existance of F_GETOWN */
if (interrupt_input)
{
old_fcntl_owner = fcntl (0, F_GETOWN, 0);
fcntl (0, F_SETOWN, getpid ());
init_sigio ();
}
#endif /* F_GETOWN */
#endif /* F_SETFL */
/* If going to use CBREAK mode, we must request C-g to interrupt
and turn off start and stop chars, etc.
If not going to use CBREAK mode, do this anyway
so as to turn off local flow control for user coming over
network on 4.2; in this case, only t_stopc and t_startc really matter. */
#ifdef TIOCGLTC
ioctl (0, TIOCGETC, &old_tchars);
ioctl (0, TIOCGLTC, &old_ltchars);
ioctl (0, TIOCLGET, &old_lmode);
/* Note: if not using CBREAK mode, it makes no difference how we set this */
tchars = new_tchars;
tchars.t_intrc = 07;
if (flow_control)
{
tchars.t_startc = '\021';
tchars.t_stopc = '\023';
}
/* LPASS8 is new in 4.3, and makes cbreak mode provide all 8 bits. */
#ifndef LPASS8
#define LPASS8 0
#endif
#ifdef BSD4_1
#define LNOFLSH 0100000
#endif
lmode = LDECCTQ | LLITOUT | LPASS8 | LNOFLSH | old_lmode;
ioctl (0, TIOCSETC, &tchars);
ioctl (0, TIOCSLTC, &new_ltchars);
ioctl (0, TIOCLSET, &lmode);
#endif TIOCGLTC
#ifdef BSD4_1
if (interrupt_input)
init_sigio ();
#endif
#ifdef VMS
/* Appears to do nothing when in PASTHRU mode.
SYS$QIOW (0, input_chan, IO$_SETMODE|IO$M_OUTBAND, 0, 0, 0,
interrupt_signal, oob_chars, 0, 0, 0, 0);
*/
queue_kbd_input (0);
#endif /* VMS */
}
#ifdef _IOFBF
/* This symbol is defined on recent USG systems.
Someone says without this call USG won't really buffer the file
even with a call to setbuf(). */
setvbuf (stdout, _sobuf, _IOFBF, sizeof _sobuf);
#else
setbuf (stdout, _sobuf);
#endif
set_terminal_modes ();
if (term_initted && no_redraw_on_reenter)
{
if (display_completed)
direct_output_forward_char (0);
}
else
screen_garbaged = 1;
term_initted = 1;
}
/* Return nonzero if safe to use tabs in output.
At the time this is called, init_sys_modes has not been done yet. */
tabs_safe_p ()
{
TERMINAL sg;
if (noninteractive)
return 1;
#ifdef VMS
SYS$QIOW (0, input_chan, IO$_SENSEMODE, &sg, 0, 0,
&sg.class, 12, 0, 0, 0, 0);
#else
ioctl (0, TIOCGETP, &sg);
#endif /* not VMS */
return (TABS_OK(sg));
}
/* Get terminal size from system.
Store number of lines into *heightp and width into *widthp.
If zero or a negative number is stored, the value is not valid. */
get_screen_size (widthp, heightp)
int *widthp, *heightp;
{
/* Define the 4.3 names in terms of the Sun names
if the latter exist and the former do not. */
#ifdef TIOCGSIZE
#ifndef TIOCGWINSZ
#define TIOCGWINSZ TIOCGSIZE
#define winsize ttysize
#define ws_row ts_lines
#define ws_col ts_cols
#endif
#endif /* Sun */
/* Do it using the 4.3 names if possible. */
#ifdef TIOCGWINSZ
struct winsize size;
*widthp = 0;
*heightp = 0;
if (ioctl (0, TIOCGWINSZ, &size) < 0)
return;
if ((unsigned) size.ws_col > MScreenWidth
|| (unsigned) size.ws_row > MScreenLength)
return;
*widthp = size.ws_col;
*heightp = size.ws_row;
#else /* not TIOCGWNSIZ */
#ifdef VMS
TERMINAL sg;
SYS$QIOW (0, input_chan, IO$_SENSEMODE, &sg, 0, 0,
&sg.class, 12, 0, 0, 0, 0);
*widthp = sg.scr_wid;
*heightp = sg.scr_len;
#else /* system doesn't know size */
*widthp = 0;
*heightp = 0;
#endif /* system does not know size */
#endif /* not TIOCGWINSZ */
}
\f
reset_sys_modes ()
{
if (noninteractive)
{
fflush (stdout);
return;
}
if (!term_initted)
return;
topos (screen_height - 1, 0);
clear_end_of_line (screen_width);
/* clear_end_of_line may move the cursor */
topos (screen_height - 1, 0);
reset_terminal_modes ();
fflush (stdout);
#ifdef BSD
#ifndef BSD4_1
/* Avoid possible loss of output when changing terminal modes. */
fsync (fileno (stdout));
#endif
#endif
if (read_socket_hook)
return;
#ifdef TIOCGLTC
ioctl (0, TIOCSETC, &old_tchars);
ioctl (0, TIOCSLTC, &old_ltchars);
ioctl (0, TIOCLSET, &old_lmode);
#endif /* TIOCGLTC */
#ifdef F_SETFL
#ifdef F_SETOWN /* F_SETFL does not imply existance of F_SETOWN */
if (interrupt_input)
{
reset_sigio ();
fcntl (0, F_SETOWN, old_fcntl_owner);
}
#endif /* F_SETOWN */
#endif /* F_SETFL */
#ifdef BSD4_1
if (interrupt_input)
reset_sigio ();
#endif /* BSD4_1 */
#ifdef VMS
end_kbd_input ();
SYS$QIOW (0, input_chan, IO$_SETMODE, &input_iosb, 0, 0,
&old_gtty.class, 12, 0, 0, 0, 0);
#else /* not VMS */
while (ioctl (0, TCSETAW, &old_gtty) < 0 && errno == EINTR);
#endif /* not VMS */
}
\f
#ifdef VMS
/* Assigning an input channel is done at the start of Emacs execution.
This is called each time Emacs is resumed, also, but does nothing
because input_chain is no longer zero. */
init_vms_input()
{
int status;
if (input_chan == 0)
{
status = SYS$ASSIGN (&input_dsc, &input_chan, 0, 0);
if (! (status & 1))
LIB$STOP (status);
}
}
/* Deassigning the input channel is done before exiting. */
stop_vms_input ()
{
return SYS$DASSGN (input_chan);
}
short input_buffer;
/* Request reading one character into the keyboard buffer.
This is done as soon as the buffer becomes empty. */
queue_kbd_input ()
{
int status;
waiting_for_ast = 0;
stop_input = 0;
status = SYS$QIO (0, input_chan, IO$_READVBLK,
&input_iosb, kbd_input_ast, 1,
&input_buffer, 1, 0, terminator_mask, 0, 0);
}
int input_count;
static int ast_active;
/* Ast routine that is called when keyboard input comes in
in accord with the SYS$QIO above. */
kbd_input_ast ()
{
register int c = -1;
if (waiting_for_ast)
SYS$SETEF (input_ef);
waiting_for_ast = 0;
input_count++;
#ifdef ASTDEBUG
if (input_count == 25)
exit (1);
printf ("Ast # %d,", input_count);
printf (" iosb = %x, %x, %x, %x",
input_iosb.offset, input_iosb.status, input_iosb.termlen,
input_iosb.term);
#endif
if (input_iosb.offset)
{
c = input_buffer;
#ifdef ASTDEBUG
printf (", char = 0%o", c);
#endif
}
#ifdef ASTDEBUG
printf ("\n");
fflush (stdout);
sleep (1);
#endif
if (! stop_input)
queue_kbd_input ();
if (c >= 0)
{
ast_active = 1;
kbd_buffer_store_char (c);
ast_active = 0;
}
}
/* Wait until there is something in kbd_buffer. */
wait_for_kbd_input ()
{
int have_input;
extern int have_process_input, process_exited;
/* If already something, avoid doing system calls. */
get_input_pending (&have_input);
if (have_input)
{
return;
}
/* Clear a flag, and tell ast routine above to set it. */
SYS$CLREF (input_ef);
waiting_for_ast = 1;
/* Check for timing error: ast happened while we were doing that. */
get_input_pending (&have_input);
if (!have_input)
{
/* No timing error: wait for flag to be set. */
SYS$WFLOR (input_ef, input_eflist);
get_input_pending (&have_input);
if (!have_input) /* Check for subprocess input availability */
{
int dsp = have_process_input || process_exited;
if (have_process_input)
process_command_input ();
if (process_exited)
process_exit ();
if (dsp)
{
RedoModes++;
DoDsp (1);
}
}
}
waiting_for_ast = 0;
}
/* Get rid of any pending QIO, when we are about to suspend
or when we want to throw away pending input.
We wait for a positive sign that the AST routine has run
and therefore there is no I/O request queued when we return.
SYS$SETAST is used to avoid a timing error. */
end_kbd_input()
{
#ifdef ASTDEBUG
printf ("At end_kbd_input.\n");
fflush (stdout);
sleep (1);
#endif
SYS$SETAST (0);
/* Clear a flag, and tell ast routine above to set it. */
SYS$CLREF (input_ef);
waiting_for_ast = 1;
stop_input = 1;
SYS$CANCEL (input_chan);
SYS$SETAST (1);
if (!ast_active)
SYS$WAITFR (input_ef);
waiting_for_ast = 0;
}
/* Wait for either input available or time interval expiry. */
input_wait_timeout (timeval)
int timeval; /* Time to wait, in seconds */
{
int time [2];
int have_input;
LIB$EMUL (&timeval, &-10000000, &0, time); /* Convert to VMS format */
/* If already something, avoid doing system calls. */
get_input_pending (&have_input);
if (have_input)
{
return;
}
/* Clear a flag, and tell ast routine above to set it. */
SYS$CLREF (input_ef);
waiting_for_ast = 1;
/* Check for timing error: ast happened while we were doing that. */
get_input_pending (&have_input);
if (!have_input)
{
/* No timing error: wait for flag to be set. */
SYS$CANTIM (1, 0);
if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */
SYS$WFLOR (timer_ef, timer_eflist); /* Wait for timer expiry or input */
}
waiting_for_ast = 0;
}
/* The standard `sleep' routine works some other way
and it stops working if you have ever quit out of it.
This one continues to work. */
sys_sleep (timeval)
int timeval;
{
int time [2];
LIB$EMUL (&timeval, &-10000000, &0, time); /* Convert to VMS format */
SYS$CANTIM (1, 0);
if (SYS$SETIMR (timer_ef, time, 0, 1) & 1) /* Set timer */
SYS$WAITFR (timer_ef); /* Wait for timer expiry only */
}
init_sigio ()
{
request_sigio ();
}
reset_sigio ()
{
unrequest_sigio ();
}
request_sigio ()
{
croak ("request sigio");
}
unrequest_sigio ()
{
croak ("unrequest sigio");
}
#endif /* VMS */
\f
/* Note that VMS compiler won't accept defined (CANNOT_DUMP). */
#ifndef CANNOT_DUMP
#define NEED_STARTS
#endif
#ifndef SYSTEM_MALLOC
#ifndef NEED_STARTS
#define NEED_STARTS
#endif
#endif
#ifdef NEED_STARTS
/* Some systems that cannot dump also cannot implement these. */
/*
* Return the address of the start of the text segment prior to
* doing an unexec(). After unexec() the return value is undefined.
* See crt0.c for further explanation and _start().
*
*/
char *
start_of_text ()
{
#ifdef TEXT_START
return ((char *) TEXT_START);
#else
#ifdef GOULD
extern csrt();
return ((char *) csrt);
#else /* not GOULD */
extern int _start ();
return ((char *) _start);
#endif /* GOULD */
#endif /* TEXT_START */
}
/*
* Return the address of the start of the data segment prior to
* doing an unexec(). After unexec() the return value is undefined.
* See crt0.c for further information and definition of data_start.
*
* Apparently, on BSD systems this is etext at startup. On
* USG systems (swapping) this is highly mmu dependent and
* is also dependent on whether or not the program is running
* with shared text. Generally there is a (possibly large)
* gap between end of text and start of data with shared text.
*
* On Uniplus+ systems with shared text, data starts at a
* fixed address. Each port (from a given oem) is generally
* different, and the specific value of the start of data can
* be obtained via the UniPlus+ specific "uvar(2)" system call,
* however the method outlined in crt0.c seems to be more portable.
*
* Probably what will have to happen when a USG unexec is available,
* at least on UniPlus, is temacs will have to be made unshared so
* that text and data are contiguous. Then once loadup is complete,
* unexec will produce a shared executable where the data can be
* at the normal shared text boundry and the startofdata variable
* will be patched by unexec to the correct value.
*
*/
char *
start_of_data ()
{
#ifdef DATA_START
return ((char *) DATA_START);
#else
extern int data_start;
return ((char *) &data_start);
#endif
}
#endif /* NEED_STARTS (not CANNOT_DUMP or not SYSTEM_MALLOC) */
#ifndef CANNOT_DUMP
/* Some systems that cannot dump also cannot implement these. */
/*
* Return the address of the end of the text segment prior to
* doing an unexec(). After unexec() the return value is undefined.
*/
char *
end_of_text ()
{
#ifdef TEXT_END
return ((char *) TEXT_END);
#else
extern int etext;
return ((char *) &etext);
#endif
}
/*
* Return the address of the end of the data segment prior to
* doing an unexec(). After unexec() the return value is undefined.
*/
char *
end_of_data ()
{
#ifdef DATA_END
return ((char *) DATA_END);
#else
extern int edata;
return ((char *) &edata);
#endif
}
#endif /* not CANNOT_DUMP */
\f
/* Get_system_name returns as its value
a string for the Lisp function system-name to return. */
#ifdef BSD4_1
#include <whoami.h>
#endif
#ifdef USG
/* Can't have this within the function since `static' is #defined to nothing */
static struct utsname get_system_name_name;
#endif
char *
get_system_name ()
{
#ifdef USG
uname (&get_system_name_name);
return (get_system_name_name.nodename);
#else /* Not USG */
#ifdef BSD4_1
return sysname;
#else /* not USG, not 4.1 */
static char system_name_saved[32];
#ifdef VMS
char *sp;
if ((sp = egetenv("SYS$NODE")) == 0)
sp = "vax-vms";
else
{
char *end;
if ((end = index (sp, ':')) != 0)
*end = '\0';
}
strcpy (system_name_saved, sp);
#else /* not VMS */
gethostname (system_name_saved, sizeof (system_name_saved));
#endif /* not VMS */
return system_name_saved;
#endif /* not USG, not 4.1 */
#endif /* not USG */
}
\f
#ifndef HAVE_SELECT
/* Emulate as much as select as is possible under 4.1 and needed by Gnu Emacs
* Only checks read descriptors.
*/
/* How long to wait between checking fds in select */
#define SELECT_PAUSE 1
int select_alarmed;
select_alarm ()
{
select_alarmed = 1;
#ifdef BSD4_1
sigrelse (SIGALRM);
#else /* not BSD4_1 */
signal (SIGALRM, SIG_IGN);
#endif /* not BSD4_1 */
}
/* Only rfds are checked and timeout must point somewhere */
int
select (nfds, rfds, wfds, efds, timeout)
int nfds;
int *rfds, *wfds, *efds, *timeout;
{
int ravail = 0, orfds = 0, old_alarm, val;
extern int kbd_count;
extern int proc_buffered_char[];
#ifndef subprocesses
int child_changed = 0;
#else
extern int child_changed;
#endif
int (*old_trap) ();
char buf;
if (rfds)
{
orfds = *rfds;
*rfds = 0;
}
if (wfds)
*wfds = 0;
if (efds)
*efds = 0;
/* If we are looking only for the terminal, with no timeout,
just read it and wait -- that's more efficient. */
if (orfds == 1 && *timeout == 100000 && !child_changed)
{
if (!kbd_count)
read_input_waiting ();
*rfds = 1;
return 1;
}
/* Once a second, till the timer expires, check all the flagged read
* descriptors to see if any input is available. If there is some then
* set the corresponding bit in the return copy of rfds.
*/
while (1)
{
register int to_check, bit, fd;
if (rfds)
{
for (to_check = nfds, bit = 1, fd = 0; --to_check >= 0; bit <<= 1, fd++)
{
if (orfds & bit)
{
int avail = 0, status = 0;
if (bit == 1)
avail = detect_input_pending(); /* Special keyboard handler */
else
{
#ifdef FIONREAD
status = ioctl (fd, FIONREAD, &avail);
#else /* no FIONREAD */
/* Hoping it will return -1 if nothing available
or 0 if all 0 chars requested are read. */
if (proc_buffered_char[fd] >= 0)
avail = 1;
else
{
avail = read (fd, &buf, 1);
if (avail > 0)
proc_buffered_char[fd] = buf;
}
#endif /* no FIONREAD */
}
if (status >= 0 && avail > 0)
{
(*rfds) |= bit;
ravail++;
}
}
}
}
if (*timeout == 0 || ravail != 0 || child_changed)
break;
old_alarm = alarm (0);
old_trap = (int (*)()) signal (SIGALRM, select_alarm);
select_alarmed = 0;
alarm (SELECT_PAUSE);
/* Wait for a SIGALRM (or maybe a SIGTINT) */
while (select_alarmed == 0 && *timeout != 0 && child_changed == 0)
{
/* If we are interested in terminal input,
wait by reading the terminal.
That makes instant wakeup for terminal input at least. */
if (orfds & 1)
{
read_input_waiting ();
if (kbd_count)
select_alarmed = 1;
}
else
pause();
}
(*timeout) -= SELECT_PAUSE;
/* Reset the old alarm if there was one */
alarm (0);
signal (SIGALRM, old_trap);
if (old_alarm != 0)
{
/* Reset or forge an interrupt for the original handler. */
old_alarm -= SELECT_PAUSE;
if (old_alarm <= 0)
kill (getpid (), SIGALRM); /* Fake an alarm with the orig' handler */
else
alarm (old_alarm);
}
if (*timeout == 0) /* Stop on timer being cleared */
break;
}
return ravail;
}
/* Read keyboard input into the standard buffer,
waiting for at least one character. */
read_input_waiting ()
{
extern int kbd_count;
extern unsigned char kbd_buffer[];
extern unsigned char *kbd_ptr;
int val = read (fileno(stdin), kbd_buffer, 1);
if (val > 0)
{
kbd_ptr = kbd_buffer;
kbd_count = val;
}
}
#endif /* not HAVE_SELECT */
\f
#ifdef BSD4_1
/* VARARGS */
setpriority ()
{
return 0;
}
/*
* Partially emulate 4.2 open call.
* open is defined as this in 4.1.
*
* - added by Michael Bloom @ Citicorp/TTI
*
*/
int
sys_open (path, oflag, mode)
char *path;
int oflag, mode;
{
if (oflag & O_CREAT)
return creat (path, mode);
else
return open (path, oflag);
}
init_sigio ()
{
if (noninteractive)
return;
lmode = LINTRUP | lmode;
ioctl (0, TIOCLSET, &lmode);
}
reset_sigio ()
{
if (noninteractive)
return;
lmode = ~LINTRUP & lmode;
ioctl (0, TIOCLSET, &lmode);
}
request_sigio ()
{
sigrelse (SIGTINT);
interrupts_deferred = 0;
}
unrequest_sigio ()
{
sighold (SIGTINT);
interrupts_deferred = 1;
}
/* still inside #ifdef BSD4_1 */
#ifdef subprocesses
int sigheld; /* Mask of held signals */
sigholdx (signum)
int signum;
{
sigheld |= sigbit (signum);
sighold (signum);
}
sigisheld (signum)
int signum;
{
sigheld |= sigbit (signum);
}
sigunhold (signum)
int signum;
{
sigheld &= ~sigbit (signum);
sigrelse (signum);
}
sigfree () /* Free all held signals */
{
int i;
for (i = 0; i < NSIG; i++)
if (sigheld & sigbit (i))
sigrelse (i);
sigheld = 0;
}
sigbit (i)
{
return 1 << (i - 1);
}
#endif /* subprocesses */
#endif /* BSD4_1 */
\f
#ifndef BSTRING
void
bzero (b, length)
register char *b;
register int length;
{
#ifdef VMS
short zero = 0;
long max_str = 65535;
while (length > max_str) {
(void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b);
length -= max_str;
b += max_str;
}
(void) LIB$MOVC5 (&zero, &zero, &zero, &length, b);
#else
while (length-- > 0)
*b++ = 0;
#endif /* not VMS */
}
/* Saying `void' requires a declaration, above, where bcopy is used
and that declaration causes pain for systems where bcopy is a macro. */
bcopy (b1, b2, length)
register char *b1;
register char *b2;
register int length;
{
#ifdef VMS
long max_str = 65535;
while (length > max_str) {
(void) LIB$MOVC3 (&max_str, b1, b2);
length -= max_str;
b1 += max_str;
b2 += max_str;
}
(void) LIB$MOVC3 (&length, b1, b2);
#else
while (length-- > 0)
*b2++ = *b1++;
#endif /* not VMS */
}
int
bcmp (b1, b2, length) /* This could be a macro! */
register char *b1;
register char *b2;
register int length;
{
#ifdef VMS
struct dsc$descriptor_s src1 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b1};
struct dsc$descriptor_s src2 = {length, DSC$K_DTYPE_T, DSC$K_CLASS_S, b2};
return STR$COMPARE (&src1, &src2);
#else
while (length-- > 0)
if (*b1++ != *b2++)
return 1;
return 0;
#endif /* not VMS */
}
#endif /* not BSTRING */
\f
#ifdef BSD4_1
long random ()
{
return (rand ());
}
srandom (arg)
int arg;
{
srand (arg);
}
#endif BSD4_1
#ifdef USG
/*
* The BSD random(3) returns numbers in the range of
* 0 to 2e31 - 1. The USG rand(3C) returns numbers in the
* range of 0 to 2e15 - 1. This is probably not significant
* in this usage.
*/
long
random ()
{
return (rand ());
}
srandom (arg)
int arg;
{
srand (arg);
}
#endif /* USG */
\f
#ifdef VMS
#ifdef getenv
/* If any place else asks for the TERM variable,
allow it to be overridden with the EMACS_TERM variable
before getting VMS's special idea of the TERM variable. */
#undef getenv
char *
sys_getenv (name)
char *name;
{
register char *val;
if (!strcmp (name, "TERM"))
{
val = (char *) getenv ("EMACS_TERM");
if (val)
return val;
}
return (char *) getenv (name);
}
#endif /* getenv */
#ifdef abort
/* Since VMS doesn't believe in core dumps, the only way to debug this beast is
to force a call on the debugger from within the image. */
#undef abort
sys_abort ()
{
reset_sys_modes ();
LIB$SIGNAL (SS$_DEBUG);
}
#endif /* abort */
#endif /* VMS */
\f
#ifdef VMS
#ifdef LINK_CRTL_SHARE
#ifdef SHAREABLE_LIB_BUG
/* Variables declared noshare and initialized in shareable libraries
cannot be shared. The VMS linker incorrectly forces you to use a private
version which is uninitialized... If not for this "feature", we
could use the C library definition of sys_nerr and sys_errlist. */
int sys_nerr = 35;
char *sys_errlist[] =
{
"error 0",
"not owner",
"no such file or directory",
"no such process",
"interrupted system call",
"i/o error",
"no such device or address",
"argument list too long",
"exec format error",
"bad file number",
"no child process",
"no more processes",
"not enough memory",
"permission denied",
"bad address",
"block device required",
"mount devices busy",
"file exists",
"cross-device link",
"no such device",
"not a directory",
"is a directory",
"invalid argument",
"file table overflow",
"too many open files",
"not a typewriter",
"text file busy",
"file too big",
"no space left on device",
"illegal seek",
"read-only file system",
"too many links",
"broken pipe",
"math argument",
"result too large",
"I/O stream empty",
"vax/vms specific error code nontranslatable error"
};
#endif /* SHAREABLE_LIB_BUG */
#endif /* LINK_CRTL_SHARE */
#endif /* VMS */
\f
#ifdef INTERRUPTABLE_OPEN
int
/* VARARGS 2 */
sys_open (path, oflag, mode)
char *path;
int oflag, mode;
{
register int rtnval;
while ((rtnval = open (path, oflag, mode)) == -1 && errno == EINTR);
return (rtnval);
}
#endif /* INTERRUPTABLE_OPEN */
#ifdef INTERRUPTABLE_IO
int
sys_read (fildes, buf, nbyte)
int fildes;
char *buf;
unsigned int nbyte;
{
register int rtnval;
while ((rtnval = read (fildes, buf, nbyte)) == -1 && errno == EINTR);
return (rtnval);
}
int
sys_write (fildes, buf, nbyte)
int fildes;
char *buf;
unsigned int nbyte;
{
register int rtnval;
while ((rtnval = write (fildes, buf, nbyte)) == -1 && errno == EINTR);
return (rtnval);
}
#endif /* INTERRUPTABLE_IO */
\f
#ifdef USG
/*
* All of the following are for USG.
*
* On USG systems the system calls are interruptable by signals
* that the user program has elected to catch. Thus the system call
* must be retried in these cases. To handle this without massive
* changes in the source code, we remap the standard system call names
* to names for our own functions in sysdep.c that do the system call
* with retries. Actually, for portability reasons, it is good
* programming practice, as this example shows, to limit all actual
* system calls to a single occurance in the source. Sure, this
* adds an extra level of function call overhead but it is almost
* always negligible. Fred Fish, Unisoft Systems Inc.
*/
char *sys_siglist[NSIG + 1] =
{
"bogus signal", /* 0 */
"hangup", /* 1 SIGHUP */
"interrupt", /* 2 SIGINT */
"quit", /* 3 SIGQUIT */
"illegal instruction", /* 4 SIGILL */
"trace trap", /* 5 SIGTRAP */
"IOT instruction", /* 6 SIGIOT */
"EMT instruction", /* 7 SIGEMT */
"floating point exception", /* 8 SIGFPE */
"kill", /* 9 SIGKILL */
"bus error", /* 10 SIGBUS */
"segmentation violation", /* 11 SIGSEGV */
"bad argument to system call", /* 12 SIGSYS */
"write on a pipe with no one to read it", /* 13 SIGPIPE */
"alarm clock", /* 14 SIGALRM */
"software termination signum", /* 15 SIGTERM */
"user defined signal 1", /* 16 SIGUSR1 */
"user defined signal 2", /* 17 SIGUSR2 */
"death of a child", /* 18 SIGCLD */
"power-fail restart", /* 19 SIGPWR */
0
};
/*
* Warning, this function may not duplicate 4.2 action properly
* under error conditions.
*/
#ifndef MAXPATHLEN
/* In 4.1, param.h fails to define this. */
#define MAXPATHLEN 1024
#endif
char *
getwd (pathname)
char *pathname;
{
char *npath;
extern char *getcwd ();
npath = getcwd (0, MAXPATHLEN);
/* On Altos 3068, getcwd can return @hostname/dir, so discard
up to first slash. Should be harmless on other systems. */
while (*npath && *npath != '/')
npath++;
strcpy (pathname, npath);
return pathname;
}
/*
* Emulate rename using unlink/link. Note that this is
* only partially correct. Also, doesn't enforce restriction
* that files be of same type (regular->regular, dir->dir, etc).
*/
rename (from, to)
char *from;
char *to;
{
if (access (from, 0) == 0)
{
unlink (to);
if (link (from, to) == 0)
if (unlink (from) == 0)
return (0);
}
return (-1);
}
/* VARARGS */
setpriority ()
{
return (0);
}
#ifndef HAVE_VFORK
/*
* Substitute fork(2) for vfork(2) on USG flavors.
*/
vfork ()
{
return (fork ());
}
#endif /* not HAVE_VFORK */
#ifdef HPUX
/* HPUX sets HAVE_TIMEVAL but does not implement utimes. */
utimes ()
{
}
/* HPUX curses library references perror, but as far as we know
it won't be called. Anyway this definition will do for now. */
perror ()
{
}
#endif /* HPUX */
#ifndef HAVE_DUP2
/*
* Emulate BSD dup2(2). First close newd if it already exists.
* Then, attempt to dup oldd. If not successful, call dup2 recursively
* until we are, then close the unsuccessful ones.
*/
dup2 (oldd, newd)
int oldd;
int newd;
{
register int fd;
close (newd);
while ((fd = dup (oldd)) != newd) {
dup2 (oldd, newd);
close (fd);
}
}
#endif /* not HAVE_DUP2 */
/*
* Gettimeofday. Simulate as much as possible. Only accurate
* to nearest second. Emacs doesn't use tzp so ignore it for now.
* Only needed when subprocesses are defined.
*/
#ifdef subprocesses
#ifndef HAVE_GETTIMEOFDAY
#ifdef HAVE_TIMEVAL
/* ARGSUSED */
gettimeofday (tp, tzp)
struct timeval *tp;
struct timezone *tzp;
{
extern long time ();
tp->tv_sec = time ((long *)0);
tp->tv_usec = 0;
}
#endif
#endif
#endif /* subprocess && !HAVE_GETTIMEOFDAY && HAVE_TIMEVAL */
/*
* This function will go away as soon as all the stubs fixed. (fnf)
*/
croak (badfunc)
char *badfunc;
{
printf ("%s not yet implemented\r\n", badfunc);
reset_sys_modes ();
exit (1);
}
#endif /* USG */
\f
/* Directory routines for systems that don't have them. */
#ifdef NONSYSTEM_DIR_LIBRARY
DIR *
opendir (filename)
char *filename; /* name of directory */
{
register DIR *dirp; /* -> malloc'ed storage */
register int fd; /* file descriptor for read */
struct stat sbuf; /* result of fstat() */
fd = sys_open (filename, 0);
if (fd < 0)
return 0;
if (fstat (fd, &sbuf) < 0
|| (sbuf.st_mode & S_IFMT) != S_IFDIR
|| (dirp = (DIR *) malloc (sizeof (DIR))) == 0)
{
close (fd);
return 0; /* bad luck today */
}
dirp->dd_fd = fd;
dirp->dd_loc = dirp->dd_size = 0; /* refill needed */
return dirp;
}
void
closedir (dirp)
register DIR *dirp; /* stream from opendir() */
{
close (dirp->dd_fd);
free ((char *) dirp);
}
#ifndef VMS
#define DIRSIZ 14
struct olddir
{
ino_t od_ino; /* inode */
char od_name[DIRSIZ]; /* filename */
};
#endif /* VMS */
struct direct dir_static; /* simulated directory contents */
/* ARGUSED */
struct direct *
readdir (dirp)
register DIR *dirp; /* stream from opendir() */
{
#ifndef VMS
register struct olddir *dp; /* -> directory data */
#else /* VMS */
register struct dir$_name *dp; /* -> directory data */
register struct dir$_version *dv; /* -> version data */
char * lower_case ();
#endif /* VMS */
for (; ;)
{
if (dirp->dd_loc >= dirp->dd_size)
dirp->dd_loc = dirp->dd_size = 0;
if (dirp->dd_size == 0 /* refill buffer */
&& (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0)
return 0;
#ifndef VMS
dp = (struct olddir *) &dirp->dd_buf[dirp->dd_loc];
dirp->dd_loc += sizeof (struct olddir);
if (dp->od_ino != 0) /* not deleted entry */
{
dir_static.d_ino = dp->od_ino;
strncpy (dir_static.d_name, dp->od_name, DIRSIZ);
dir_static.d_name[DIRSIZ] = '\0';
dir_static.d_namlen = strlen (dir_static.d_name);
dir_static.d_reclen = sizeof (struct direct)
- MAXNAMLEN + 3
+ dir_static.d_namlen - dir_static.d_namlen % 4;
return &dir_static; /* -> simulated structure */
}
#else /* VMS */
dp = (struct dir$_name *) dirp->dd_buf;
if (dirp->dd_loc == 0)
dirp->dd_loc = (dp->dir$b_namecount&1) ? dp->dir$b_namecount + 1
: dp->dir$b_namecount;
dv = (struct dir$_version *)&dp->dir$t_name[dirp->dd_loc];
dir_static.d_ino = dv->dir$w_fid_num;
dir_static.d_namlen = dp->dir$b_namecount;
dir_static.d_reclen = sizeof (struct direct)
- MAXNAMLEN + 3
+ dir_static.d_namlen - dir_static.d_namlen % 4;
strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount);
dir_static.d_name[dir_static.d_namlen] = '\0';
(void) lower_case (dir_static.d_name);
dirp->dd_loc = dirp->dd_size; /* only one record at a time */
return &dir_static;
#endif /* VMS */
}
}
#ifdef VMS
/* readdirver is just like readdir except it returns all versions of a file
as separate entries. */
/* ARGUSED */
struct direct *
readdirver (dirp)
register DIR *dirp; /* stream from opendir() */
{
register struct dir$_name *dp; /* -> directory data */
register struct dir$_version *dv; /* -> version data */
char version[7];
char *lower_case ();
while (1)
{
if (dirp->dd_loc >= dirp->dd_size)
dirp->dd_loc = dirp->dd_size = 0;
if (dirp->dd_size == 0 /* refill buffer */
&& (dirp->dd_size = sys_read (dirp->dd_fd, dirp->dd_buf, DIRBLKSIZ)) <= 0)
return 0;
dp = (struct dir$_name *) dirp->dd_buf;
if (dirp->dd_loc == 0)
dirp->dd_loc = (dp->dir$b_namecount&1) ? dp->dir$b_namecount + 1
: dp->dir$b_namecount;
dv = (struct dir$_version *)&dp->dir$t_name[dirp->dd_loc];
dir_static.d_ino = dv->dir$w_fid_num;
dir_static.d_namlen = dp->dir$b_namecount;
dir_static.d_reclen = sizeof (struct direct)
- MAXNAMLEN + 3
+ dir_static.d_namlen - dir_static.d_namlen % 4;
strncpy (dir_static.d_name, dp->dir$t_name, dp->dir$b_namecount);
dir_static.d_name[dir_static.d_namlen] = '\0';
sprintf (&dir_static.d_name[dir_static.d_namlen], ";%d",
dv->dir$w_version);
dir_static.d_namlen = strlen (dir_static.d_name);
(void) lower_case (dir_static.d_name);
dirp->dd_loc = ((char *)(++dv) - dp->dir$t_name);
return &dir_static;
}
}
#endif /* VMS */
#endif /* NONSYSTEM_DIR_LIBRARY */
\f
/* Functions for VMS */
#ifdef VMS
#include <pwd.h>
#include <acldef.h>
#include <chpdef.h>
#include <jpidef.h>
#ifdef access
#undef access
/* The following is necessary because 'access' emulation by VMS C (2.0) does
* not work correctly.
*/
#ifdef VMS4_4
#define DESCRIPTOR(name,string) struct dsc$descriptor_s name = \
{ strlen(string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string }
typedef union {
struct {
unsigned short s_buflen;
unsigned short s_code;
char *s_bufadr;
unsigned short *s_retlenadr;
} s;
int end;
} item;
#define buflen s.s_buflen
#define code s.s_code
#define bufadr s.s_bufadr
#define retlenadr s.s_retlenadr
#define R_OK 4 /* test for read permission */
#define W_OK 2 /* test for write permission */
#define X_OK 1 /* test for execute (search) permission */
#define F_OK 0 /* test for presence of file */
int
sys_access (path, mode)
char *path;
int mode;
{
static char *user = NULL;
if (mode == F_OK)
return access (path, mode);
if (user == NULL && (user = getenv("USER")) == NULL)
return -1;
{
int stat;
int flags;
int acces;
int dummy;
item itemlst[3];
DESCRIPTOR(path_desc, path);
DESCRIPTOR(user_desc, user);
flags = 0;
acces = 0;
if ((mode & X_OK) && ((stat = access(path, mode)) < 0 || mode == X_OK))
return stat;
if (mode & R_OK)
acces |= CHP$M_READ;
if (mode & W_OK)
acces |= CHP$M_WRITE;
itemlst[0].buflen = sizeof (int);
itemlst[0].code = CHP$_FLAGS;
itemlst[0].bufadr = &flags;
itemlst[0].retlenadr = &dummy;
itemlst[1].buflen = sizeof (int);
itemlst[1].code = CHP$_ACCESS;
itemlst[1].bufadr = &acces;
itemlst[1].retlenadr = &dummy;
itemlst[2].end = CHP$_END;
stat = SYS$CHECK_ACCESS(&ACL$C_FILE, &path_desc, &user_desc, itemlst);
return stat == SS$_NORMAL ? 0 : -1;
}
}
#else /* not VMS4_4 */
#include <prvdef.h>
#define ACE$M_WRITE 2
#define ACE$C_KEYID 1
static unsigned short memid, grpid;
static unsigned int uic;
int
sys_access (file, type)
char * file;
int type;
{
struct FAB fab;
struct XABPRO xab;
int status, prvmask[2], size, i, typecode, acl_controlled;
unsigned int *aclptr, *aclend, aclbuf[60];
/* Get UIC and GRP values for protection checking. */
if (uic == 0)
{
status = LIB$GETJPI (&JPI$_UIC, 0, 0, &uic, 0, 0);
if (! (status & 1))
return -1;
memid = uic & 0xFFFF;
grpid = uic >> 16;
}
if (type != 2) /* not checking write access */
return access (filename, type);
/* Check write protection. */
#define CHECKPRIV(bit) (prvmask[bit / 32] & (1 << (bit % 32)))
#define WRITEABLE(field) (! ((xab.xab$w_pro >> field) & XAB$M_NOWRITE))
/* Find privilege bits */
status = sys$setprv (0, 0, 0, prvmask);
if (! (status & 1))
error ("Unable to find privileges: %s", vmserrstr(status ));
if (CHECKPRIV (PRV$V_BYPASS))
return 0; /* BYPASS enabled */
fab = cc$rms_fab;
fab.fab$b_fac = FAB$M_GET;
fab.fab$l_fna = filename;
fab.fab$b_fns = strlen (filename);
fab.fab$l_xab = &xab;
xab = cc$rms_xabpro;
xab.xab$l_aclbuf = aclbuf;
xab.xab$w_aclsiz = sizeof (aclbuf);
status = sys$open (&fab, 0, 0);
if (! (status & 1))
return -1;
sys$close (&fab, 0, 0);
/* Check system access */
if (CHECKPRIV (PRV$V_SYSPRV) && WRITEABLE (XAB$V_SYS))
return 0;
/* Check ACL entries, if any */
acl_controlled = 0;
if (xab.xab$w_acllen > 0)
{
aclptr = aclbuf;
aclend = &aclbuf[xab.xab$w_acllen / 4];
while (*aclptr && aclptr < aclend)
{
size = (*aclptr & 0xff) / 4;
typecode = (*aclptr >> 8) & 0xff;
if (typecode == ACE$C_KEYID)
for (i = size - 1; i > 1; i--)
if (aclptr[i] == uic)
{
acl_controlled = 1;
if (aclptr[1] & ACE$M_WRITE)
return 0; /* Write access through ACL */
}
aclptr = &aclptr[size];
}
if (acl_controlled) /* ACL specified, prohibits write access */
return -1;
}
/* No ACL entries specified, check normal protection */
if (WRITEABLE (XAB$V_WLD)) /* World writeable */
return 0;
if (WRITEABLE (XAB$V_GRP) &&
(unsigned short) (xab.xab$l_uic >> 16) == grpid)
return 0; /* Group writeable */
if (WRITEABLE (XAB$V_OWN) &&
(xab.xab$l_uic & 0xFFFF) == memid)
return 0; /* Owner writeable */
return -1; /* Not writeable */
}
#endif /* not VMS4_4 */
#endif /* access */
static char vtbuf[NAM$C_MAXRSS+1];
/* translate a vms file spec to a unix path */
char *
sys_translate_vms (vfile)
char * vfile;
{
char * p;
char * targ;
if (!vfile)
return 0;
targ = vtbuf;
/* leading device or logical name is a root directory */
if (p = strchr (vfile, ':'))
{
*targ++ = '/';
while (vfile < p)
*targ++ = *vfile++;
vfile++;
*targ++ = '/';
}
p = vfile;
if (*p == '[' || *p == '<')
{
while (*++vfile != *p + 2)
switch (*vfile)
{
case '.':
if (vfile[-1] == *p)
*targ++ = '.';
*targ++ = '/';
break;
case '-':
*targ++ = '.';
*targ++ = '.';
break;
default:
*targ++ = *vfile;
break;
}
vfile++;
*targ++ = '/';
}
while (*vfile)
*targ++ = *vfile++;
return vtbuf;
}
static char utbuf[NAM$C_MAXRSS+1];
/* translate a unix path to a VMS file spec */
char *
sys_translate_unix (ufile)
char * ufile;
{
int slash_seen = 0;
char *p;
char * targ;
if (!ufile)
return 0;
targ = utbuf;
if (*ufile == '/')
{
ufile++;
}
while (*ufile)
{
switch (*ufile)
{
case '/':
if (slash_seen)
if (index (&ufile[1], '/'))
*targ++ = '.';
else
*targ++ = ']';
else
{
*targ++ = ':';
if (index (&ufile[1], '/'))
*targ++ = '[';
slash_seen = 1;
}
break;
case '.':
if (strncmp (ufile, "./", 2) == 0)
{
if (!slash_seen)
{
*targ++ = '[';
slash_seen = 1;
}
ufile++; /* skip the dot */
if (index (&ufile[1], '/'))
*targ++ = '.';
else
*targ++ = ']';
}
else if (strncmp (ufile, "../", 3) == 0)
{
if (!slash_seen)
{
*targ++ = '[';
slash_seen = 1;
}
*targ++ = '-';
ufile += 2; /* skip the dots */
if (index (&ufile[1], '/'))
*targ++ = '.';
else
*targ++ = ']';
}
else
*targ++ = *ufile;
break;
default:
*targ++ = *ufile;
break;
}
ufile++;
}
*targ = '\0';
return utbuf;
}
char *
lower_case (pathname)
char * pathname;
{
char * ptr = pathname;
if (ptr)
while (*ptr) {
if ('A' <= *ptr && *ptr <= 'Z')
*ptr += 040;
ptr++;
}
return pathname;
}
char *
getwd (pathname)
char *pathname;
{
return strcpy (pathname, egetenv ("PATH"));
}
getppid ()
{
long item_code = JPI$_OWNER;
unsigned long parent_id;
int status;
if (((status = LIB$GETJPI (&item_code, 0, 0, &parent_id)) & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
return parent_id;
}
#undef getuid
unsigned
sys_getuid ()
{
return (getgid () << 16) | getuid ();
}
int
sys_read (fildes, buf, nbyte)
int fildes;
char *buf;
unsigned int nbyte;
{
return read (fildes, buf, (nbyte < MAXIOSIZE ? nbyte : MAXIOSIZE));
}
#if 0
int
sys_write (fildes, buf, nbyte)
int fildes;
char *buf;
unsigned int nbyte;
{
register int nwrote, rtnval = 0;
while (nbyte > MAXIOSIZE && (nwrote = write (fildes, buf, MAXIOSIZE)) > 0) {
nbyte -= nwrote;
buf += nwrote;
rtnval += nwrote;
}
if (nwrote < 0)
return rtnval ? rtnval : -1;
if ((nwrote = write (fildes, buf, nbyte)) < 0)
return rtnval ? rtnval : -1;
return (rtnval + nwrote);
}
#endif /* 0 */
/*
* VAX/VMS VAX C RTL really loses. It insists that records
* end with a newline (carriage return) character, and if they
* don't it adds one (nice of it isn't it!)
*
* Thus we do this stupidity below.
*/
int
sys_write (fildes, buf, nbytes)
int fildes;
char *buf;
unsigned int nbytes;
{
register char *p;
register char *e;
int retval, sum;
p = buf;
sum = 0;
while (nbytes > 0)
{
e = p + min (MAXIOSIZE, nbytes) - 1;
while (*e != '\n' && e > p) e--;
if (p == e) /* Ok.. so here we add a newline... sigh. */
e = p + min (MAXIOSIZE, nbytes) - 1;
retval = write (fildes, p, e - p + 1);
if (retval != e - p + 1) return -1;
p = e + 1;
sum = sum + retval;
nbytes -= retval;
}
return sum;
}
#ifdef creat
#undef creat
#include <varargs.h>
sys_creat (name, mode, va_alist)
char * name;
va_dcl
{
va_list list_incrementor;
int rfd; /* related file descriptor */
int fd; /* Our new file descriptor */
int count;
struct stat st_buf;
char rfm[12];
char rat[15];
char mrs[13];
char fsz[13];
extern int vms_stmlf_recfm;
va_count (count);
if (count > 2)
{
/* Use information from the related file descriptor to set record
format of the newly created file. */
va_start_1 (list_incrementor, 8);
rfd = va_arg (list_incrementor, int);
va_end (list_incrementor);
fstat (rfd, &st_buf);
switch (st_buf.st_fab_rfm)
{
case FAB$C_FIX:
strcpy (rfm, "rfm = fix");
sprintf (mrs, "mrs = %d", st_buf.st_fab_mrs);
strcpy (rat, "rat = ");
if (st_buf.st_fab_rat & FAB$M_CR)
strcat (rat, "cr");
else if (st_buf.st_fab_rat & FAB$M_FTN)
strcat (rat, "ftn");
else if (st_buf.st_fab_rat & FAB$M_PRN)
strcat (rat, "prn");
if (st_buf.st_fab_rat & FAB$M_BLK)
if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN))
strcat (rat, ", blk");
else
strcat (rat, "blk");
return creat (name, 0, rfm, rat, mrs);
case FAB$C_VFC:
strcpy (rfm, "rfm = vfc");
sprintf (fsz, "fsz = %d", st_buf.st_fab_fsz);
strcpy (rat, "rat = ");
if (st_buf.st_fab_rat & FAB$M_CR)
strcat (rat, "cr");
else if (st_buf.st_fab_rat & FAB$M_FTN)
strcat (rat, "ftn");
else if (st_buf.st_fab_rat & FAB$M_PRN)
strcat (rat, "prn");
if (st_buf.st_fab_rat & FAB$M_BLK)
if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN))
strcat (rat, ", blk");
else
strcat (rat, "blk");
return creat (name, 0, rfm, rat, fsz);
case FAB$C_STM:
strcpy (rfm, "rfm = stm");
break;
case FAB$C_STMCR:
strcpy (rfm, "rfm = stmcr");
break;
case FAB$C_STMLF:
strcpy (rfm, "rfm = stmlf");
break;
case FAB$C_UDF:
strcpy (rfm, "rfm = udf");
break;
case FAB$C_VAR:
strcpy (rfm, "rfm = var");
break;
}
strcpy (rat, "rat = ");
if (st_buf.st_fab_rat & FAB$M_CR)
strcat (rat, "cr");
else if (st_buf.st_fab_rat & FAB$M_FTN)
strcat (rat, "ftn");
else if (st_buf.st_fab_rat & FAB$M_PRN)
strcat (rat, "prn");
if (st_buf.st_fab_rat & FAB$M_BLK)
if (st_buf.st_fab_rat & (FAB$M_CR|FAB$M_FTN|FAB$M_PRN))
strcat (rat, ", blk");
else
strcat (rat, "blk");
}
else
{
strcpy (rfm, vms_stmlf_recfm ? "rfm = stmlf" : "rfm=var");
strcpy (rat, "rat=cr");
}
/* Until the VAX C RTL fixes the many bugs with modes, always use
mode 0 to get the user's default protection. */
fd = creat (name, 0, rfm, rat);
if (fd < 0 && errno == EEXIST)
{
if (unlink (name) < 0)
report_file_error ("delete", build_string (name));
fd = creat (name, 0, rfm, rat);
}
return fd;
}
#endif /* creat */
/* fwrite to stdout is S L O W. Speed it up by using fputc...*/
sys_fwrite (ptr, size, num, fp)
register char * ptr;
FILE * fp;
{
register int tot = num * size;
while (tot--)
fputc (*ptr++, fp);
}
/* Define this symbol to actually read SYSUAF.DAT. This requires either
SYSPRV or a readable SYSUAF.DAT. */
#ifdef READ_SYSUAF
/*
* getuaf.c
*
* Routine to read the VMS User Authorization File and return
* a specific user's record.
*/
static struct UAF retuaf;
struct UAF *
get_uaf_name(uname)
char * uname;
{
register status;
struct FAB uaf_fab;
struct RAB uaf_rab;
uaf_fab = cc$rms_fab;
uaf_rab = cc$rms_rab;
/* initialize fab fields */
uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT";
uaf_fab.fab$b_fns = 21;
uaf_fab.fab$b_fac = FAB$M_GET;
uaf_fab.fab$b_org = FAB$C_IDX;
uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL;
/* initialize rab fields */
uaf_rab.rab$l_fab = &uaf_fab;
/* open the User Authorization File */
status = sys$open(&uaf_fab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
status = sys$connect(&uaf_rab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
/* read the requested record - index is in uname */
uaf_rab.rab$l_kbf = uname;
uaf_rab.rab$b_ksz = strlen (uname);
uaf_rab.rab$b_rac = RAB$C_KEY;
uaf_rab.rab$l_ubf = (char *)&retuaf;
uaf_rab.rab$w_usz = sizeof retuaf;
status = sys$get(&uaf_rab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
/* close the User Authorization File */
status = sys$disconnect(&uaf_rab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
status = sys$close(&uaf_fab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
return &retuaf;
}
struct UAF *
get_uaf_uic(uic)
unsigned long uic;
{
register status;
struct FAB uaf_fab;
struct RAB uaf_rab;
uaf_fab = cc$rms_fab;
uaf_rab = cc$rms_rab;
/* initialize fab fields */
uaf_fab.fab$l_fna = "SYS$SYSTEM:SYSUAF.DAT";
uaf_fab.fab$b_fns = 21;
uaf_fab.fab$b_fac = FAB$M_GET;
uaf_fab.fab$b_org = FAB$C_IDX;
uaf_fab.fab$b_shr = FAB$M_GET|FAB$M_PUT|FAB$M_UPD|FAB$M_DEL;
/* initialize rab fields */
uaf_rab.rab$l_fab = &uaf_fab;
/* open the User Authorization File */
status = sys$open(&uaf_fab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
status = sys$connect(&uaf_rab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
/* read the requested record - index is in uic */
uaf_rab.rab$b_krf = 1; /* 1st alternate key */
uaf_rab.rab$l_kbf = (char *) &uic;
uaf_rab.rab$b_ksz = sizeof uic;
uaf_rab.rab$b_rac = RAB$C_KEY;
uaf_rab.rab$l_ubf = (char *)&retuaf;
uaf_rab.rab$w_usz = sizeof retuaf;
status = sys$get(&uaf_rab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
/* close the User Authorization File */
status = sys$disconnect(&uaf_rab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
status = sys$close(&uaf_fab);
if (!(status&1))
{
errno = EVMSERR;
vaxc$errno = status;
return 0;
}
return &retuaf;
}
static struct passwd retpw;
struct passwd *
cnv_uaf_pw (up)
struct UAF * up;
{
char * ptr;
/* copy these out first because if the username is 32 chars, the next
section will overwrite the first byte of the UIC */
retpw.pw_uid = up->uaf$w_mem;
retpw.pw_gid = up->uaf$w_grp;
/* I suppose this is not the best sytle, to possibly overwrite one
byte beyond the end of the field, but what the heck... */
ptr = &up->uaf$t_username[UAF$S_USERNAME];
while (ptr[-1] == ' ')
ptr--;
*ptr = '\0';
strcpy (retpw.pw_name, up->uaf$t_username);
lower_case (retpw.pw_name);
/* the rest of these are counted ascii strings */
strncpy (retpw.pw_gecos, &up->uaf$t_owner[1], up->uaf$t_owner[0]);
retpw.pw_gecos[up->uaf$t_owner[0]] = '\0';
strncpy (retpw.pw_dir, &up->uaf$t_defdev[1], up->uaf$t_defdev[0]);
retpw.pw_dir[up->uaf$t_defdev[0]] = '\0';
strncat (retpw.pw_dir, &up->uaf$t_defdir[1], up->uaf$t_defdir[0]);
retpw.pw_dir[up->uaf$t_defdev[0] + up->uaf$t_defdir[0]] = '\0';
lower_case (retpw.pw_dir);
strncpy (retpw.pw_shell, &up->uaf$t_defcli[1], up->uaf$t_defcli[0]);
retpw.pw_shell[up->uaf$t_defcli[0]] = '\0';
return &retpw;
}
#else /* not READ_SYSUAF */
static struct passwd retpw;
#endif /* not READ_SYSUAF */
struct passwd *
getpwnam (name)
char * name;
{
#ifdef READ_SYSUAF
struct UAF *up;
#else
char * user;
char * dir;
char * full;
#endif /* READ_SYSUAF */
char *ptr = name;
while (*ptr)
{
if ('a' <= *ptr && *ptr <= 'z')
*ptr -= 040;
ptr++;
}
#ifdef READ_SYSUAF
if (!(up = get_uaf_name (name)))
return 0;
return cnv_uaf_pw (up);
#else
if (strcmp (name, getenv ("USER")) == 0)
{
retpw.pw_uid = getuid ();
retpw.pw_gid = getgid ();
strcpy (retpw.pw_name, name);
if (full = egetenv ("FULLNAME"))
strcpy (retpw.pw_gecos, full);
else
*retpw.pw_gecos = '\0';
strcpy (retpw.pw_dir, egetenv ("HOME"));
*retpw.pw_shell = '\0';
return &retpw;
}
else
return 0;
#endif /* not READ_SYSUAF */
}
struct passwd *
getpwuid (uid)
unsigned long uid;
{
#ifdef READ_SYSUAF
struct UAF * up;
if (!(up = get_uaf_uic (uid)))
return 0;
return cnv_uaf_pw (up);
#else
if (uid == sys_getuid ())
return getpwnam (egetenv ("USER"));
else
return 0;
#endif /* not READ_SYSUAF */
}
/* return total address space available to the current process. This is
the sum of the current p0 size, p1 size and free page table entries
available. */
vlimit ()
{
int item_code;
unsigned long free_pages;
unsigned long frep0va;
unsigned long frep1va;
register status;
item_code = JPI$_FREPTECNT;
if (((status = LIB$GETJPI (&item_code, 0, 0, &free_pages)) & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
free_pages *= 512;
item_code = JPI$_FREP0VA;
if (((status = LIB$GETJPI (&item_code, 0, 0, &frep0va)) & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
item_code = JPI$_FREP1VA;
if (((status = LIB$GETJPI (&item_code, 0, 0, &frep1va)) & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
return free_pages + frep0va + (0x7fffffff - frep1va);
}
define_logical_name (varname, string)
char *varname;
char *string;
{
int global_sym = 2;
struct dsc$descriptor_s strdsc =
{strlen (string), DSC$K_DTYPE_T, DSC$K_CLASS_S, string};
struct dsc$descriptor_s envdsc =
{strlen (varname), DSC$K_DTYPE_T, DSC$K_CLASS_S, varname};
return LIB$SET_SYMBOL (&envdsc, &strdsc, &global_sym);
}
execvp()
{
croak ("execvp");
}
ulimit()
{}
setpriority()
{}
setpgrp()
{}
rename (from, to)
char * from, * to;
{
int status;
struct dsc$descriptor_s from_dsc = {
strlen (from), DSC$K_DTYPE_T, DSC$K_CLASS_S, from},
to_dsc = {
strlen (to), DSC$K_DTYPE_T, DSC$K_CLASS_S, to};
status = LIB$RENAME_FILE (&from_dsc, &to_dsc);
if (status & 1)
return 0;
else
{
if (status == RMS$_DEV)
errno = EXDEV;
else
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
}
link (file, new)
char * file, * new;
{
register status;
struct FAB fab;
struct NAM nam;
unsigned short fid[3];
char esa[NAM$C_MAXRSS];
fab = cc$rms_fab;
fab.fab$l_fop = FAB$M_OFP;
fab.fab$l_fna = file;
fab.fab$b_fns = strlen (file);
fab.fab$l_nam = &nam;
nam = cc$rms_nam;
nam.nam$l_esa = esa;
nam.nam$b_ess = NAM$C_MAXRSS;
status = SYS$PARSE (&fab);
if ((status & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
status = SYS$SEARCH (&fab);
if ((status & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
fid[0] = nam.nam$w_fid[0];
fid[1] = nam.nam$w_fid[1];
fid[2] = nam.nam$w_fid[2];
fab.fab$l_fna = new;
fab.fab$b_fns = strlen (new);
status = SYS$PARSE (&fab);
if ((status & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
nam.nam$w_fid[0] = fid[0];
nam.nam$w_fid[1] = fid[1];
nam.nam$w_fid[2] = fid[2];
nam.nam$l_esa = nam.nam$l_name;
nam.nam$b_esl = nam.nam$b_name + nam.nam$b_type + nam.nam$b_ver;
status = SYS$ENTER (&fab);
if ((status & 1) == 0)
{
errno = EVMSERR;
vaxc$errno = status;
return -1;
}
return 0;
}
croak (badfunc)
char *badfunc;
{
printf ("%s not yet implemented\r\n", badfunc);
reset_sys_modes ();
exit (1);
}
long
random ()
{
static int initted = 0;
int bintim;
if (! initted)
{
initted = 1;
time (&bintim);
srand (getpid() + bintim);
}
return (rand ());
}
srandom (seed)
{
srand (seed);
}
#endif /* VMS */
\f
#ifdef ATT3B
int sign_extend_temp;
#endif /* ATT3B */
#ifdef amdahl_uts
int sign_extend_temp;
#endif /* amdahl_uts */