DataMuseum.dk

top - metrics - download

    Length: 1209 (0x4b9)
    Types: TextFile
    Names: »README.SYSV«

└─⟦9ae75bfbd⟧ Bits:30007242 EUUGD3: Starter Kit
    └─⟦5cced586a⟧ »EurOpenD3/news/nntp/nntp.1.5.7.tar.Z« 
        └─⟦7340f105e⟧ 
            └─⟦this⟧ »./common/README.SYSV« 

TextFile

To make NNTP run on SYSV, do the following:

1. Get the Berkeley Directory Library emulation package. You can get it
from archive-server@bcm.tmc.edu. This is the so-called NDIR 
package. Install it. (If you don't know if you have it, look for the
file ndir.h in /usr/include. If it is there, you have the NDIR library
and can move on the step 2.)

2. Edit common/conf.h. Make sure you define USG and look at all the
other stuff in there to be sure you have defined all the other things
you need. (You will most likely need to define U_LONG, ALONE, vfork,
and FAKESYSLOG. You will most likely need to undefine FASTFORK, BSD_42,
DBM, SUBNET, NETMASK, DAMAGED_NETMASK, and DECNET.) You will probably need to
undefine SYSLOG if you don't define FAKESYSLOG.

3. Edit server/Makefile. Make sure to add -lndir to the LIBS line.
If you have EXCELAN, you will probably need to add a -lsocket here as
well. If the networking include files are not in the "standard location"
(i.e. /usr/include), be sure to add -Ilocation_of_the_network_include_files
to the CFLAGS line.

4. Now, you can cd to the server directory and type make.

If you have problems, send mail to sob@tmc.edu and he will help if he
can.

Stan Barber