DataMuseum.dk

top - download

    Length: 2304 (0x900)
    Types: TextFile
    Names: »configed«

└─⟦da4d89bf7⟧ Bits:30002810 RC8000-ADP SW8740/1 Rel 6.2
    └─⟦4610d1047⟧ 
        └─⟦5a3863a69⟧ 
            └─ ⟦this⟧ »configed« 
└─⟦65cf98525⟧ Bits:30007484 RC8000 ADP PACKAGE RELEASE: 6.1
    └─⟦be059034f⟧ 
        └─⟦d73d0e451⟧ 
            └─ ⟦this⟧ »configed« 

TextFile

; When editing this file, remove the top 8 lines which only serve to
; identify the file as an edit source, and fill in the file identi-
; fication. This is configed, the edit source for the adp configur-
; ation file (configcst). The default configuration defined at
; the bottom of the file will activate device handlers as specified
; in file adpcst (no configuration switch required in this file) and
; LAN communication, but not the CSP terminal or printer functions,
; and not the 3270 CU function (requires SW8703/1).

; Update the file identification when changing the file.

; FILE IDENTIFICATION
; Installation:
; IFP/ADP number:
; File name:         configed
; Date last changed:
; Person changing:

; ADP functions are activated by adding configuration switches
; to this file. Some functions are enabled by default, as indicated
; by + in the list below, provided the relevant options are
; installed. These functions may be disabled by including the con-
; figuration switch preceeded by -, e.g. -LAN (it is not enough to
; remove them from the list).

; The switches that can be used are the following:

; LAN        + LAN communication; on RC8420 this requires
;              F861 or F862
; 1CIRC      + Circuit-I communication, requires F863 or F864,
;              used for terminal download
; ITC        + software and driver for ITC, requires ITC (RC8420),
;              used by CSP terminal and printer functions
; MDLL       + terminal download
; INFO       - outputs extra information on the diagnostic
;              console during load
; LANINFO    - outputs information about LAN links on diagnostic
;              console
; MONITOR    + Online Monitor, a test tool which uses the
;              diagnostic console
; CSPTERM    - CSP terminal function
; CSPPRINT   - CSP printer function
; IBMCOM     - 3270 CU function (SW8703/1)
; CULANI     - CU LAN interface, must be set with IBMCOM if
;              terminals are to communicate with RC8000 locally
;              or across LAN

; the switches must be separated by commas or newlines:

LAN, 1CIRC, ITC, MDLL, MONITOR
▶EOF◀