|
DataMuseum.dkPresents historical artifacts from the history of: CP/M |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about CP/M Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - download
Length: 1664 (0x680)
Types: RcTekst, TextFile
Names: »99109975.WP«
└─⟦7fab0c8ae⟧ Bits:30005866/disk3.imd Dokumenter i RcTekst format (RCSL 99-1-*)
└─⟦this⟧ »99109975.WP«
╱04002d4e0a0006000000000201413100000000000000000000000000000000000000000000000000050f19232d37414b555f69737d8791ff04╱ ┆b0┆↲ ↲ ↲ ┆b0┆Amendment┆05┆Pn: 991 09975↲ ↲ ↲ ↲ ↲ ┆a1┆PROGRAM LOAD OF RC855 SECONDARY TERMINALS↲ ↲ ↲ Newer versions of these terminals as well as older versions ↓ equipped with TF304 has the possibility of using either RC890 or ↓ a RC855 Primary Terminal as a cluster controller.↲ ↲ Depending on the environment, emulator programs are loaded into ↓ the terminal in different ways.↲ ↲ The parameter "LD" (Load Device) of the Non-Volatile Memory must ↓ be defined according to the environment. Possible values are:↲ ↲ ╞ 0: Default (Terminal ROM)↲ ╞ 1: RcCircuit, Default Application↲ ╞ 2: RcCircuit, Menu↲ ╞ 3: Terminal ROM↲ ╞ 4: Terminal Hard Disk↲ ╞ 6: Terminal Diskette↲ ╞ 7: Terminal Image Load↲ ↲ In order to set the parameter to the correct value, a ↓ configuration program must be executed. The terminal has a built-↓ in emulator program with a comfigurator, which can be activated ↓ by the following procedure:↲ ↲ ╞ 1) ┆84┆Turn terminal power on (or press reset button on back of ↓ ┆19┆┆87┆┄┄terminal↲ ↲ ╞ 2) ┆84┆Hold "P"-key on keyboard pressed until the text ↲ ╞ "RC855 LP"↲ ╞ appears on the display, then release↲ ↲ ╞ 3) ┆84┆When the text↲ ╞ "RC855 IBM 3270 Emulator Rel x.x "↲ ╞ is displayed, press "C"-key once↲ ↲ ╞ 4) ┆84┆Now the configuration program is invoked. Change "LD" and ↓ ┆19┆┆87┆┄┄eventually other parameters (e.g. "SA", Secondary ↓ ┆19┆┆87┆┄┄Address). Terminate by "SEND"-key↲ ↲ ╞ 5) Now a normal load of the terminal will be initiated↲ ┆1a┆┆1a┆┆c9┆┆d8┆┆d9┆┆1b┆┆d3┆qwertyuiopå;┆d7┆«index»«index»┆d4┆789┆81┆asdfghjklæø:┆d7┆«index»«index»-456┆81┆@zxcvbnm,./«index»«index» 123┆d3┆«index»«index»«index» «index»┆81┆┆81┆«index»«index» 00.┆d3┆å┆9a┆┆91┆┆a2┆┆a3┆┆a4┆┆a5┆┆a6┆
B▶03◀▶06◀N▶04◀-N ▶06◀▶02◀▶01◀A1▶05◀▶0f◀▶19◀#-7AKU_iså▶87◀▶91◀▶ff◀▶04◀▶b0◀ ▶b0◀Amendment▶05◀Pn: 991 09975 ▶a1◀PROGRAM LOAD OF RC855 SECONDARY TERMINALS Newer versions of these terminals as well as older versions equipped with TF304 has the possibility of using either RC890 or a RC855 Primary Terminal as a cluster controller. Depending on the environment, emulator programs are loaded into the terminal in different ways. The parameter "LD" (Load Device) of the Non-Volatile Memory must be defined according to the environment. Possible values are: 0: Default (Terminal ROM) 1: RcCircuit, Default Application 2: RcCircuit, Menu 3: Terminal ROM 4: Terminal Hard Disk 6: Terminal Diskette 7: Terminal Image Load In order to set the parameter to the correct value, a configuration program must be executed. The terminal has a built- in emulator program with a comfigurator, which can be activated by the following procedure: 1) ▶84◀Turn terminal power on (or press reset button on back of ▶19◀▶87◀▶80◀▶80◀terminal 2) ▶84◀Hold "P"-key on keyboard pressed until the text "RC855 LP" appears on the display, then release 3) ▶84◀When the text "RC855 IBM 3270 Emulator Rel x.x " is displayed, press "C"-key once 4) ▶84◀Now the configuration program is invoked. Change "LD" and ▶19◀▶87◀▶80◀▶80◀eventually other parameters (e.g. "SA", Secondary ▶19◀▶87◀▶80◀▶80◀Address). Terminate by "SEND"-key 5) Now a normal load of the terminal will be initiated «eof»