|
DataMuseum.dkPresents historical artifacts from the history of: CP/M |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about CP/M Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - download
Length: 6272 (0x1880)
Types: RcTekst
Names: »99110065.WP«
└─⟦7fab0c8ae⟧ Bits:30005866/disk3.imd Dokumenter i RcTekst format (RCSL 99-1-*)
└─⟦this⟧ »99110065.WP«
╱04002d4e0a0006000000000301413100000000000000000000000000000000000000000000000000050f19232d37414b555f69737d8791ff04╱
════════════════════════════════════════════════════════════════════════
↓
↲
┆b0┆__________________________↲
↲
┆b0┆RCSL No:┆f0┆ 99-1 10065↲
┆b0┆Edition: ┆f0┆ May 1985↲
┆b0┆Author:┆f0┆ Henning Pedersen↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
┆b0┆┆a1┆┆b0┆┆e1┆_________________________________________________________________↲
↲
┆b0┆Title:↲
↲
┆06┆F621 Ethernet Option.↲
┆06┆HW installation.↲
↲
┆b0┆┆a1┆┆e1┆_________________________________________________________________↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
┆b0┆ RC A/S Regnecentralen↲
┆b0┆ af 1979↲
↲
↲
↲
════════════════════════════════════════════════════════════════════════
↓
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
┆b0┆_________________________________________________________________↲
┆b0┆┆a1┆┆e1┆↲
┆b0┆Keywords:↲
↲
┆84┆┆84┆RC3902, RC3931 ,CPU610, CPU691 ETC611, MEX611.↲
┆b0┆↲
┆b0┆┆a1┆┆b0┆┆e1┆↓
┆b0┆_________________________________________________________________↲
┆b0┆↲
┆b0┆Abstract:↲
↲
┆84┆This manual contains an installation guide for the ↓
┆19┆┆89┆┄┄Ethernet Option to RC3931 , in the RC3902 processor ↓
┆19┆┆89┆┄┄unit.↲
┆b0┆↲
┆a1┆┆b0┆┆f0┆┆e1┆┆b0┆_________________________________________________________________↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
════════════════════════════════════════════════════════════════════════
↓
↲
┆06┆i↲
↲
┆a1┆┆b0┆CONTENTS PAGE↲
↲
┆f0┆1. INTRODUCTION ........................... 1↲
↲
2. GENERAL DESCRIPTION OF F621 ............ 1↲
↲
3. PLACE IN CARD CASE ..................... 2↲
↲
4. INTERNAL CONNECTIONS ................... 3↲
↲
5. JUMPERS ................................ 5↲
↲
6. INSTALLATION ........................... 7↲
↲
┆b0┆ ┆a1┆┆f0┆┆e1┆ ┆b0┆┆a1┆APPENDIX:↲
↲
A. REFERENCES ............................. 8↲
┆b0┆ ____________________________________________________↲
════════════════════════════════════════════════════════════════════════
↓
↲
┆06┆ii↲
↲
↲
┆a1┆┆b0┆┆e1┆↓
════════════════════════════════════════════════════════════════════════
↓
↲
┆06┆iii↲
↲
════════════════════════════════════════════════════════════════════════
↓
┆14┆┆b3┆┆06┆ ┆0b┆↲
↲
┆b0┆┆a1┆┆b0┆┆b0┆1┆f0┆┆b0┆. INTRODUCTION↲
↲
┆84┆This manual and the references in appendix A includes ↓
┆19┆┆89┆┄┄information to opgrade a RC3931 Communication Processor with a ↓
┆19┆┆89┆┄┄Ethernet option.↲
↲
┆b0┆┆a1┆2. GENERAL DESCRIPTION OF F621↲
↲
┆84┆The F621 Ethernet is an option to the RC3931 Communication ↓
┆19┆┆89┆┄┄Processor. It includes an Ethernet Seriel Interface IC (82501 ↓
┆19┆┆89┆┄┄from INTEL or 8023 from SEEQ) and an internal cable KBL595).↲
════════════════════════════════════════════════════════════════════════
↓
┆b0┆┆a1┆3. PLACE IN CARD CASE↲
↲
┆84┆The Ethernet Seriel interface IC is installed in socket 69 on ↓
┆19┆┆89┆┄┄the ETC611. ETC611 installed in slot one. (See fig 3.1).↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
Fig 3.1 Card positions on the backplane BPL606.↲
════════════════════════════════════════════════════════════════════════
↓
┆b0┆┆a1┆4. INTERNAL CONNECTIONS↲
↲
┆84┆The section describes the internal connections. (See fig 4.1.).↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
Fig 4.1 ┆84┆Inside the RC3902 computer with RC3931 and F621.↲
════════════════════════════════════════════════════════════════════════
↓
┆a1┆Name Board Plug type at board Internal cable. ↲
↲
J5 ETC611 16 pol Mini Latch KBL595.↲
----------------------------------------------------↲
↲
Table 4.1 ┆84┆Internal connections to RC3931 with F621.↲
↲
════════════════════════════════════════════════════════════════════════
↓
┆b0┆┆a1┆┆b0┆┆a1┆┆b0┆┆a1┆5. JUMPERS↲
↲
┆84┆This part describes the jumpers on the ETC611 board in RC3931. ↓
┆19┆┆89┆┄┄Installation of F621 makes no modification of the standard ↓
┆19┆┆89┆┄┄jumper settings. (If INTEL's step A of the Ethernet Seriel ↓
┆19┆┆89┆┄┄Interface is in use then move jumper S24 from 1-2 to 2-3).↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
↲
Fig 5.1 Jumper locations on the ETC611 board.↲
↲
↲
════════════════════════════════════════════════════════════════════════
↓
↲
ST1 : No jumper. ST10 : 1 - 2↲
ST2 : 1 - 2 ST11 : No jumper.↲
ST3 : 1 - 8 ST12 : 1 - 2↲
ST3 : 2 - 7 ST13 : No jumper.↲
ST3 : 3 - 6 ST14 : 3 - 12↲
ST3 : 4 - 5 ST15 : No jumper.↲
ST4 : 1 - 12 ST16 : No jumper.↲
ST4 : 2 - 11 ST17 : 1 - 2↲
ST4 : 3 - 10 ST18 : 1 - 2↲
ST4 : 4 - 9 ST19 : 1 - 2↲
ST5 : 2 - 10 ST20 : 2 - 3↲
ST6 : 4 - 23 ST21 : 2 - 3↲
ST6 : 5 - 22 ST22 : 1 - 8↲
ST6 : 6 - 21 ST23 : 2 - 9↲
ST6 : 7 - 20 ST24 : 1 - 2↲
ST6 : 11- 19 ST25 : 1 - 2↲
ST6 : 10 - 18 ST26 : No jumper.↲
ST6 : 25 - 26 ST27 : No jumper.↲
ST7 : 2 - 3↲
ST8 : 2 - 3↲
ST9 : 1 - 2↲
↲
↲
Table 5.1 ┆84┆Jumper configuration on the ETC611 without memory ↓
┆19┆┆94┆┄┄expansion MEX611 and from no to two optional ↓
┆19┆┆94┆┄┄communication boards F64X.↲
════════════════════════════════════════════════════════════════════════
↓
┆a1┆┆b0┆6. INSTALLATION↲
↲
1. Turn off power.↲
↲
2. Remove the right side of the cover.↲
↲
3. ┆84┆Check the jumpers on ETC611 and mount the Ethernet Seriel ↓
┆19┆┆8d┆┄┄Interface IC to the ETC611 board.↲
↲
4. ┆84┆Replace ETC611.↲
↲
5. ┆84┆Connect KBL595 from J5 on ETC611 to J2 at the backpanel.↲
↲
6. Remove the back cover.↲
↲
7. ┆84┆Connect a terminal to J41 on the backplane.↲
↲
8. ┆84┆Turn on the power and Test the ETC611 from the CPU6XX (See ↓
┆19┆┆8d┆┄┄ref. 5).↲
↲
9. ┆84┆If the tests succeded, then place the back and right side ↓
┆19┆┆8d┆┄┄cover on the computer. Disconnect the terminal from J41.↲
↲
10. ┆84┆Now the hardware installation is finish. Continue with ↓
┆19┆┆8d┆┄┄software installation if necessary.↲
════════════════════════════════════════════════════════════════════════
↓
┆b0┆┆a1┆┆f0┆┆e1┆┆b0┆┆a1┆APPENDIX:↲
↲
┆b0┆┆a1┆A. REFERENCES┆b0┆↲
↲
1. ┆84┆RC3902 Processor Unit, General information. RCSL 99-1 ↓
┆19┆┆8d┆┄┄10056.↲
↲
2. ┆84┆┆84┆RC3931 Communication Processor HW installation RCSL 99-1 ↓
┆19┆┆8d┆┄┄10058.↲
↲
3. ┆84┆RC3931 ETC611 HW Selftest, Users Guide. RCSL 99-1 10095.↲
↲
4. Selftest Concept, Users Manual. RCSL 99-1 10092.↲
↲
5. ┆84┆RC3902 (CPU691) Selftest, Users Manual. RCSL 99-1 10094.↲
↲
6. Konfigureringsvejledning. RCSL 99-1 10057.↲
↲
7. ┆84┆ETC611 HW Reference Manual. RCSL 99-0 00772.↲
↲
8. ┆84┆MEX611 HW Reference Manual. RCSL 99-0 00773.↲
↲
┆1a┆┆1a┆┆1a┆┆1a┆↓
┆1a┆↲
↓
┆1a┆↓
┆1a┆00772.↲
↲
8. ┆84┆MEX61