|
|
DataMuseum.dkPresents historical artifacts from the history of: DKUUG/EUUG Conference tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about DKUUG/EUUG Conference tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - downloadIndex: M T
Length: 10653 (0x299d)
Types: TextFile
Names: »Makefile.SH«
└─⟦9ae75bfbd⟧ Bits:30007242 EUUGD3: Starter Kit
└─⟦4fd8323b9⟧ »EurOpenD3/mail/elm2.3.tar.Z«
└─⟦698c4f91f⟧
└─⟦this⟧ »utils/Makefile.SH«
case $CONFIG in
'')
if test ! -f config.sh; then
ln ../config.sh . || \
ln ../../config.sh . || \
ln ../../../config.sh . || \
(echo "Can't find config.sh."; exit 1)
fi
. ./config.sh
;;
esac
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
echo "Extracting utils/Makefile (with variable substitutions)"
cat >Makefile <<!GROK!THIS!
# @(#)$Id: Makefile.SH,v 4.1 90/04/28 22:44:26 syd Exp $
#
# Makefile for the Elm system utilities
#
# Copyright (c) 1986, 1987 Dave Taylor
# Copyright (c) 1988, 1989, 1990 USENET Community Trust
#
# Bug reports, patches, comments, suggestions should be sent to:
#
# Syd Weinstein - elm@DSI.COM
# dsinc!elm
#
# $Log: Makefile.SH,v $
# Revision 4.1 90/04/28 22:44:26 syd
# checkin of Elm 2.3 as of Release PL0
#
#
# Variables
# Variables established by Configure
CC = $cc
CCFLAGS = $ccflags $xencf
CHMOD = $chmod
CP = $cp
DEST = $bin
ECHO = $echo
LFLAGS = $ldflags $xenlf
LIB = $lib
LIB2 = $libs
LIBS = $termlib $dbm
LINT = $lint
LN = $ln
MAKE = $make
MV = $mv
OPTIMIZE = $optimize
RM = $rm -f
TOUCH = $touch
!GROK!THIS!
cat >>Makefile <<'!NO!SUBS!'
# Variables you may want to manually edit
# If you want debug logging then you'll
# want to uncomment the following.
#DEBUG = -DDEBUG
# Other general variables
BIN = ../bin
CFLAGS = $(CCFLAGS) $(OPTIMIZE) -I$(INCLDIR) $(DEBUG) $(DACSNET)
INCLDIR = ../hdrs
LINTFLAGS = -I$(INCLDIR)
SHELL = /bin/sh
# Lists
# List of installed programs - excludes wnewmail, which is
# handled separately
INSTALL_LIST = $(DEST)/answer \
$(DEST)/arepdaemon \
$(DEST)/autoreply \
$(DEST)/checkalias \
$(DEST)/fastmail \
$(DEST)/frm \
$(DEST)/listalias \
$(DEST)/messages \
$(DEST)/newalias \
$(DEST)/newmail \
$(DEST)/printmail \
$(DEST)/readmsg
# List of remotely install programs
REMOTE_LIST = $(REMOTE)$(DEST)/answer \
$(REMOTE)$(DEST)/arepdaemon \
$(REMOTE)$(DEST)/autoreply \
$(REMOTE)$(DEST)/checkalias \
$(REMOTE)$(DEST)/fastmail \
$(REMOTE)$(DEST)/frm \
$(REMOTE)$(DEST)/listalias \
$(REMOTE)$(DEST)/messages \
$(REMOTE)$(DEST)/newalias \
$(REMOTE)$(DEST)/newmail \
$(REMOTE)$(DEST)/printmail \
$(REMOTE)$(DEST)/readmsg
# List of programs in bin directory
BINARY_LIST = $(BIN)/answer \
$(BIN)/arepdaemon \
$(BIN)/autoreply \
$(BIN)/checkalias \
$(BIN)/fastmail \
$(BIN)/frm \
$(BIN)/listalias \
$(BIN)/messages \
$(BIN)/newalias \
$(BIN)/newmail \
$(BIN)/printmail \
$(BIN)/readmsg
# List of programs to $(LINT) - only C programs
LINT_LIST = answer_lint \
arepdaemon_lint \
autoreply_lint \
fastmail_lint \
frm_lint \
listalias_lint \
newalias_lint \
newmail_lint \
readmsg_lint
# List of all object files in all util programs (used in parallel makes)
UTIL_OBJ = answer.o \
arepdaem.o \
autoreply.o \
expand.o \
fastmail.o \
from.o \
listalias.o \
newalias.o \
newmail.o \
readmsg.o \
../src/opt_utils.o \
../src/string2.o \
../src/validname.o
# Lists of source and object files for each C program
ANSWER_SRC = answer.c ../src/opt_utils.c ../src/string2.c
ANSWER_OBJ = answer.o ../src/opt_utils.o ../src/string2.o
AREPDAEMON_SRC = arepdaem.c ../src/opt_utils.c ../src/errno.c
AREPDAEMON_OBJ = arepdaem.o ../src/opt_utils.o ../src/errno.o
AUTOREPLY_SRC = autoreply.c ../src/opt_utils.c
AUTOREPLY_OBJ = autoreply.o ../src/opt_utils.o
FASTMAIL_SRC = fastmail.c ../src/opt_utils.c
FASTMAIL_OBJ = fastmail.o ../src/opt_utils.o
FRM_SRC = from.c expand.c ../src/opt_utils.c ../src/string2.c
FRM_OBJ = from.o expand.o ../src/opt_utils.o ../src/string2.o
LISTALIAS_SRC = listalias.c
LISTALIAS_OBJ = listalias.o
NEWALIAS_SRC = newalias.c ../src/validname.c ../src/opt_utils.c ../src/string2.c
NEWALIAS_OBJ = newalias.o ../src/validname.o ../src/opt_utils.o ../src/string2.o
NEWMAIL_SRC = newmail.c expand.c ../src/opt_utils.c ../src/string2.c
NEWMAIL_OBJ = newmail.o expand.o ../src/opt_utils.o ../src/string2.o
READMSG_SRC = readmsg.c expand.c ../src/opt_utils.c ../src/string2.c
READMSG_OBJ = readmsg.o expand.o ../src/opt_utils.o ../src/string2.o
# Standard targets
all: objects $(BINARY_LIST)
# This unusual target enables highly efficial compilation of object files
# on systems that have the parallel make feature.
objects: $& $(UTIL_OBJ)
install: $(INSTALL_LIST) $(DEST)/wnewmail
uninstall:
$(RM) $(INSTALL_LIST) $(DEST)/wnewmail
# This is the only target that gets installed even if not out-of-date
# with respect the files from which it is installed.
rmt-install: rmt-defined
-$(MV) $(DEST)/answer $(DEST)/answer.old
-$(MV) $(DEST)/arepdaemon $(DEST)/arepdaemon.old
-$(MV) $(DEST)/autoreply $(DEST)/autoreply.old
-$(MV) $(DEST)/checkalias $(DEST)/checkalias.old
-$(MV) $(DEST)/fastmail $(DEST)/fastmail.old
-$(MV) $(DEST)/frm $(DEST)/frm.old
-$(MV) $(DEST)/listalias $(DEST)/listalias.old
-$(MV) $(DEST)/messages $(DEST)/messages.old
-$(MV) $(DEST)/newalias $(DEST)/newalias.old
-$(MV) $(DEST)/newmail $(DEST)/newmail.old
-$(MV) $(DEST)/printmail $(DEST)/printmail.old
-$(MV) $(DEST)/readmsg $(DEST)/readmsg.old
-$(MV) $(DEST)/wnewmail $(DEST)/wnewmail.old
-$(RM) $(DEST)/answer.old
-$(RM) $(DEST)/arepdaemon.old
-$(RM) $(DEST)/autoreply.old
-$(RM) $(DEST)/checkalias.old
-$(RM) $(DEST)/fastmail.old
-$(RM) $(DEST)/frm.old
-$(RM) $(DEST)/listalias.old
-$(RM) $(DEST)/messages.old
-$(RM) $(DEST)/newalias.old
-$(RM) $(DEST)/newmail.old
-$(RM) $(DEST)/printmail.old
-$(RM) $(DEST)/readmsg.old
-$(RM) $(DEST)/wnewmail.old
$(CP) $(REMOTE_LIST) $(DEST)
$(LN) $(DEST)/newmail $(DEST)/wnewmail
$(CHMOD) a+rx $(INSTALL_LIST)
rmt-defined:
@(if [ "$(REMOTE)" = "" ];\
then\
$(ECHO) "You need to define 'REMOTE' as the remote file system";\
$(ECHO) "for this particular command. The easiest way to do this";\
$(ECHO) "to type:";\
$(ECHO) " make REMOTE=<remote file system> rmt-install";\
exit 1;\
fi);
# This rule allows us to put lint output for each program on the
# same file, but make sure we start off fresh each time.
lint:
$(RM) LINT.OUT; $(MAKE) -$(MAKEFLAGS) $(LINT_LIST)
clean:
$(RM) $(UTIL_OBJ) $(BINARY_LIST)
# Dependencies and rules
# Dependencies and rules for compiling and linting C programs
.PRECIOUS: $(INCLDIR)/defs.h $(INCLDIR)/elm.h $(INCLDIR)/headers.h
$(BIN)/answer: $(ANSWER_OBJ)
$(CC) $(LFLAGS) -o $@ $(ANSWER_OBJ) $(LIB2)
answer_lint: $(ANSWER_SRC)
$(LINT) $(LINTFLAGS) $(ANSWER_SRC) >> LINT.OUT
$(BIN)/arepdaemon: $(AREPDAEMON_OBJ)
$(CC) $(LFLAGS) -o $@ $(AREPDAEMON_OBJ) $(LIB2)
arepdaemon_lint: $(AREPDAEMON_SRC)
$(LINT) $(LINTFLAGS) $(AREPDAEMON_SRC) >> LINT.OUT
$(BIN)/autoreply: $(AUTOREPLY_OBJ)
$(CC) $(LFLAGS) -o $@ $(AUTOREPLY_OBJ) $(LIB2)
autoreply_lint: $(AUTOREPLY_SRC)
$(LINT) $(LINTFLAGS) $(AUTOREPLY_SRC) >> LINT.OUT
$(BIN)/fastmail: $(FASTMAIL_OBJ)
$(CC) $(LFLAGS) -o $@ $(FASTMAIL_OBJ) $(LIB2)
fastmail_lint: $(FASTMAIL_SRC)
$(LINT) $(LINTFLAGS) $(FASTMAIL_SRC) >> LINT.OUT
$(BIN)/frm: $(FRM_OBJ)
$(CC) $(LFLAGS) -o $@ $(FRM_OBJ) $(LIB2)
frm_lint: $(FRM_SRC)
$(LINT) $(LINTFLAGS) $(FRM_SRC) >> LINT.OUT
$(BIN)/listalias: $(LISTALIAS_OBJ)
$(CC) $(LFLAGS) -o $@ $(LISTALIAS_OBJ) $(LIB2)
listalias_lint: $(LISTALIAS_SRC)
$(LINT) $(LINTFLAGS) $(LISTALIAS_SRC) >> LINT.OUT
$(BIN)/newalias: $(NEWALIAS_OBJ)
$(CC) $(LFLAGS) -o $@ $(NEWALIAS_OBJ) $(LIB2)
newalias_lint: $(NEWALIAS_SRC)
$(LINT) $(LINTFLAGS) $(NEWALIAS_SRC) >> LINT.OUT
$(BIN)/newmail: $(NEWMAIL_OBJ)
$(CC) $(LFLAGS) -o $@ $(NEWMAIL_OBJ) $(LIB2)
newmail_lint: $(NEWMAIL_SRC)
$(LINT) $(LINTFLAGS) $(NEWMAIL_SRC) >> LINT.OUT
$(BIN)/readmsg: $(READMSG_OBJ)
$(CC) $(LFLAGS) -o $@ $(READMSG_OBJ) $(LIB2)
readmsg_lint: $(READMSG_SRC)
$(LINT) $(LINTFLAGS) $(READMSG_SRC) >> LINT.OUT
# Rules to make shell scripts in bin directory
$(BIN)/checkalias: checkalias
$(CP) $? $@
$(CHMOD) u+w,a+rx $@
$(BIN)/messages: messages
$(CP) $? $@
$(CHMOD) u+w,a+rx $@
$(BIN)/printmail: printmail
$(CP) $? $@
$(CHMOD) u+w,a+rx $@
# Dependencies of header files upon other header files they include
$(INCLDIR)/defs.h: $(INCLDIR)/../config.h $(INCLDIR)/sysdefs.h
$(CHMOD) u+w $@
$(TOUCH) $@
$(INCLDIR)/elm.h: $(INCLDIR)/curses.h $(INCLDIR)/defs.h
$(CHMOD) u+w $@
$(TOUCH) $@
$(INCLDIR)/headers.h: $(INCLDIR)/curses.h $(INCLDIR)/defs.h
$(CHMOD) u+w $@
$(TOUCH) $@
# Rules to make objects from src directory
../src/opt_utils.o:
cd ../src; $(MAKE) -$(MAKEFLAGS) opt_utils.o
../src/string2.o:
cd ../src; $(MAKE) -$(MAKEFLAGS) string2.o
../src/validname.o:
cd ../src; $(MAKE) -$(MAKEFLAGS) validname.o
# Dependencies of C object files
answer.o: $(INCLDIR)/defs.h
arepdaem.o: $(INCLDIR)/defs.h
autoreply.o: $(INCLDIR)/defs.h
expand.o: $(INCLDIR)/defs.h
fastmail.o: $(INCLDIR)/defs.h $(INCLDIR)/patchlevel.h
from.o: $(INCLDIR)/defs.h
listalias.o: $(INCLDIR)/defs.h $(INCLDIR)/sysdefs.h
newalias.o: $(INCLDIR)/defs.h $(INCLDIR)/sysdefs.h
newmail.o: $(INCLDIR)/defs.h
readmsg.o: $(INCLDIR)/defs.h
# Dependencies and rules for installing programs from bin directory
$(DEST)/answer: $(BIN)/answer
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/arepdaemon: $(BIN)/arepdaemon
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/autoreply: $(BIN)/autoreply
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(CHMOD) u+s $@
$(DEST)/checkalias: $(BIN)/checkalias
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+rx $@
$(DEST)/fastmail: $(BIN)/fastmail
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/frm: $(BIN)/frm
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/listalias: $(BIN)/listalias
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/messages: $(BIN)/messages
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+rx $@
$(DEST)/newalias: $(BIN)/newalias
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/newmail: $(BIN)/newmail
-$(MV) $@ $@.old
-$(RM) $@.old
$(RM) $@
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/printmail: $(BIN)/printmail
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+rx $@
$(DEST)/readmsg: $(BIN)/readmsg
-$(MV) $@ $@.old
-$(RM) $@.old
$(CP) $? $@
$(CHMOD) a+x $@
$(DEST)/wnewmail: $(DEST)/newmail
-$(MV) $@ $@.old
-$(RM) $@.old
$(RM) $@
$(LN) $? $@
!NO!SUBS!