|
DataMuseum.dkPresents historical artifacts from the history of: DKUUG/EUUG Conference tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about DKUUG/EUUG Conference tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - downloadIndex: T c
Length: 22594 (0x5842) Types: TextFile Names: »crt0.c«
└─⟦a05ed705a⟧ Bits:30007078 DKUUG GNU 2/12/89 └─⟦6f889378a⟧ »./g++-1.36.1.tar.Z« └─⟦3aa9a3deb⟧ └─⟦this⟧ »g++-1.36.1/crt0.c«
/* C++ code startup routine. Copyright (C) 1985, 1986 Free Software Foundation, Inc. Hacked by Michael Tiemann (tiemann@mcc.com) NO WARRANTY BECAUSE THIS PROGRAM IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD M. STALLMAN AND/OR OTHER PARTIES PROVIDE THIS PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M. STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE THIS PROGRAM AS PERMITTED BELOW, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) THIS PROGRAM, EVEN IF YOU HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. GENERAL PUBLIC LICENSE TO COPY 1. You may copy and distribute verbatim copies of this source file as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy a valid copyright notice "Copyright (C) 1986 Free Software Foundation, Inc."; and include following the copyright notice a verbatim copy of the above disclaimer of warranty and of this License. 2. You may modify your copy or copies of this source file or any portion of it, and copy and distribute such modifications under the terms of Paragraph 1 above, provided that you also do the following: a) cause the modified files to carry prominent notices stating that you changed the files and the date of any change; and b) cause the whole of any work that you distribute or publish, that in whole or in part contains or is a derivative of this program or any part thereof, to be licensed at no charge to all third parties on terms identical to those contained in this License Agreement (except that you may choose to grant more extensive warranty protection to some or all third parties, at your option). c) You may charge a distribution fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. Mere aggregation of another unrelated program with this program (or its derivative) on a volume of a storage or distribution medium does not bring the other program under the scope of these terms. 3. You may copy and distribute this program (or a portion or derivative of it, under Paragraph 2) in object code or executable form under the terms of Paragraphs 1 and 2 above provided that you also do one of the following: a) accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Paragraphs 1 and 2 above; or, b) accompany it with a written offer, valid for at least three years, to give any third party free (except for a nominal shipping charge) a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Paragraphs 1 and 2 above; or, c) accompany it with the information you received as to where the corresponding source code may be obtained. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form alone.) For an executable file, complete source code means all the source code for all modules it contains; but, as a special exception, it need not include source code for modules which are standard libraries that accompany the operating system on which the executable file runs. 4. You may not copy, sublicense, distribute or transfer this program except as expressly provided under this License Agreement. Any attempt otherwise to copy, sublicense, distribute or transfer this program is void and your rights to use the program under this License agreement shall be automatically terminated. However, parties who have received computer software programs from you with this License Agreement will not have their licenses terminated so long as such parties remain in full compliance. 5. If you wish to incorporate parts of this program into other free programs whose distribution conditions are different, write to the Free Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not yet worked out a simple rule that can be stated here, but we will often permit this. We will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software. In other words, you are welcome to use, share and improve this program. You are forbidden to forbid anyone else to use, share and improve what you give them. Help stamp out software-hoarding! */ /* The standard Vax 4.2 Unix crt0.c cannot be used for Emacs because it makes `envron' an initialized variable. It is easiest to have a special crt0.c on all machines though I don't know whether other machines actually need it. */ /* Also, the standard crt0.c cannot be used for C++, since C++ guarantees to call global constructors before main () is called, and to call global destructors after control has left from main (). */ /* On the vax and 68000, in BSD4.2 and USG5.2, this is the data format on startup: (vax) ap and fp are unpredictable as far as I know; don't use them. sp -> word containing argc word pointing to first arg string [word pointing to next arg string]... 0 or more times 0 Optionally: [word pointing to environment variable]... 1 or more times ... 0 And always: first arg string [next arg string]... 0 or more times */ /* On the 16000, at least in the one 4.2 system I know about, the initial data format is sp -> word containing argc word containing argp word pointing to first arg string, and so on as above */ /* On Suns, and possibly on other machines, a routine called `on_exit' is used to call termination handling routines. If your system provides this feature, define the macro ON_EXIT to perform this task. It is called after a program calls exit(3) or returns normally, and before its process terminates. The routine named is called as (*procp)(status, arg); where status is the argument with which exit was called, or zero if main returns. Typically, arg is the address of an argument vector to (*procp), but may be an integer value. Several calls may be made to ON_EXIT, specifying several termination handlers. The order in which they are called is the reverse of that in which they were given to ON_EXIT. Some systems may impose a limit on the number of termination handlers which can be specified. Users near that limit are warned that GNU C++ will take one of those slots. Note that proper GNU C++ code will not need to rely on this mechanism at the application level, because thoughtfully constructed classes will take care of this automatically. There is no limit to the number of classes which GNU C++ can destroy. :-) */ #include "config.h" extern void exit (); extern void __do_global_init (); extern void __do_global_cleanup (); /* ******** WARNING ******** Do not insert any data definitions before data_start! Since this is the first file linked, the address of the following variable should correspond to the start of initialized data space. On some systems this is a constant that is independent of the text size for shared executables. On others, it is a function of the text size. In short, this seems to be the most portable way to discover the start of initialized data space dynamically at runtime, for either shared or unshared executables, on either swapping or virtual systems. It only requires that the linker allocate objects in the order encountered, a reasonable model for most Unix systems. Similarly, note that the address of _start() should be the start of text space. Fred Fish, UniSoft Systems Inc. */ int data_start = 0; #ifdef NEED_ERRNO int errno = 0; #endif #ifndef DONT_NEED_ENVIRON char **environ; #endif #if defined(sequent) asm(" .globl _387_flt"); asm(" .set _387_flt,0"); #endif #ifdef convex int use_libc_sema = 0; #endif #if defined(sun) #define ON_EXIT(PROCP, ARG) \ do { extern void PROCP (); on_exit (PROCP, ARG); } while (0) #endif #ifndef sun386 /* Not compatible with i386, sigh */ #if defined(i386) || defined(ALTOS) _start(arg) char *arg; { int argc = (int)(&arg)[-1]; environ = &arg + argc + 1; #ifndef sequent setchrclass((char *)0); #endif __do_global_init(); exit(main(argc, &arg, environ)); } #endif #endif /* sun386 */ #if defined(orion) || defined(pyramid) || defined(celerity) || defined(ALLIANT) #ifdef ALLIANT /* _start must initialize _curbrk and _minbrk on the first startup; when starting up after dumping, it must initialize them to what they were before the dumping, since they are in the shared library and are not dumped. See ADJUST_EXEC_HEADER in m-alliant.h. */ extern unsigned char *_curbrk, *_minbrk; extern unsigned char end; unsigned char *_setbrk = &end; #endif _start (argc, argv, envp) int argc; char **argv, **envp; { #ifdef ALLIANT _curbrk = _setbrk; _minbrk = _setbrk; #endif environ = envp; __do_global_init (); exit (main (argc, argv, envp)); } #endif /* orion or pyramid or celerity or alliant */ #if defined (ns16000) && !defined (sequent) && !defined (UMAX) _start () { /* On 16000, _start pushes fp onto stack */ start1 (); } /* ignore takes care of skipping the fp value pushed in start. */ static start1 (ignore, argc, argv) int ignore; int argc; register char **argv; { environ = argv + argc + 1; if (environ == *argv) environ--; __do_global_init (); exit (main (argc, argv, environ)); } #endif /* ns16000, not sequent and not UMAX */ #ifdef UMAX _start() { asm(" exit [] # undo enter"); asm(" .set exitsc,1"); asm(" .set sigcatchall,0x400"); asm(" .globl _exit"); asm(" .globl start"); asm(" .globl __start"); asm(" .globl _main"); asm(" .globl _environ"); asm(" .globl _sigvec"); asm(" .globl sigentry"); asm("start:"); asm(" br .xstart"); asm(" .org 0x20"); asm(" .double p_glbl,0,0xf00000,0"); asm(" .org 0x30"); asm(".xstart:"); asm(" adjspb $8"); asm(" movd 8(sp),0(sp) # argc"); asm(" addr 12(sp),r0"); asm(" movd r0,4(sp) # argv"); asm("L1:"); asm(" movd r0,r1"); asm(" addqd $4,r0"); asm(" cmpqd $0,0(r1) # null args term ?"); asm(" bne L1"); asm(" cmpd r0,0(4(sp)) # end of 'env' or 'argv' ?"); asm(" blt L2"); asm(" addqd $-4,r0 # envp's are in list"); asm("L2:"); asm(" movd r0,8(sp) # env"); asm(" movd r0,@_environ # indir is 0 if no env ; not 0 if env"); asm(" movqd $0,tos # setup intermediate signal handler"); asm(" addr @sv,tos"); asm(" movzwd $sigcatchall,tos"); asm(" jsr @_sigvec"); asm(" adjspb $-12"); asm(" jsr @___do_global_init"); asm(" jsr @_main"); asm(" adjspb $-12"); asm(" movd r0,tos"); asm(" jsr @___do_global_cleanup"); asm(" jsr @_exit"); asm(" adjspb $-4"); asm(" addr @exitsc,r0"); asm(" svc"); asm(" .align 4 # sigvec arg"); asm("sv:"); asm(" .double sigentry"); asm(" .double 0"); asm(" .double 0"); asm(" .comm p_glbl,1"); } #endif /* UMAX */ #ifdef CRT0_DUMMIES /* Define symbol "start": here; some systems want that symbol. */ #ifdef DOT_GLOBAL_START asm(" .text "); asm(" .globl start "); asm(" start: "); #endif /* DOT_GLOBAL_START */ #ifdef NODOT_GLOBAL_START asm(" text "); asm(" global start "); asm(" start: "); #endif /* NODOT_GLOBAL_START */ #ifdef hp300 asm(" .text "); asm(" .long 0 "); /* conveniently both a 0 and a nop */ #endif _start () { /* On vax, nothing is pushed here */ /* On sequent, bogus fp is pushed here */ start1 (); } static start1 (CRT0_DUMMIES argc, xargv) int argc; char *xargv; { register char **argv = &xargv; environ = argv + argc + 1; if ((char *)environ == xargv) environ--; __do_global_init (); exit (main (argc, argv, environ)); } #else /* not CRT0_DUMMIES */ /* "m68k" and "m68000" both stand for m68000 processors, but with different program-entry conventions. This is a kludge. Now that the CRT0_DUMMIES mechanism above exists, most of these machines could use the vax code above with some suitable definition of CRT0_DUMMIES. Then the symbol m68k could be flushed. But I don't want to risk breaking these machines in a version 17 patch release, so that change is being put off. */ #ifdef m68k /* Can't do it all from C */ asm (" global _start"); asm (" text"); asm ("_start:"); #ifndef NU #ifdef STRIDE asm (" comm havefpu%,2"); #else /* m68k, not STRIDE */ asm (" data"); asm (" even"); asm (" global splimit%"); asm ("splimit%:"); asm (" space 4"); #endif /* STRIDE */ asm (" global exit"); asm (" text"); #ifdef STRIDE asm (" trap &3"); asm (" mov.w %d0,havefpu%"); #else /* m68k, not STRIDE */ asm (" mov.l %d0,splimit%"); #endif /* STRIDE */ #endif /* not NU */ asm (" jsr start1"); asm (" mov.l %d0,(%sp)"); asm (" jsr exit"); asm (" mov.l &1,%d0"); /* d0 = 1 => exit */ asm (" trap &0"); #else /* m68000, not m68k */ #if defined(m68000) || defined(mc68000) || defined(mc68020) || defined(sun386) #ifdef ISI68K /* Added by ESM Sun May 24 12:44:02 1987 to get new ISI library to work */ asm (" .globl is68020"); asm ("is68020:"); asm (" .long 0x00000000"); asm (" .long 0xffffffff"); /* End of stuff added by ESM */ asm (" .text"); asm (" .globl __start"); asm ("__start:"); asm (" .word 0"); asm (" link fp,#0"); asm (" jbsr _start1"); asm (" unlk fp"); asm (" rts"); #else /* not ISI68K */ _start () { static start1 (); /* On 68000, _start pushes a6 onto stack (as does the sun386i, sort of...) */ start1 (); } #endif /* not ISI68k */ #endif /* m68000 || mc68000 || mc68020 || sun386 */ #endif /* m68k */ #if defined(m68k) || defined(m68000) || defined(mc68000) || defined(mc68020) || defined(sun386) /* ignore takes care of skipping the a6 value pushed in start. */ static #if defined(m68k) start1 (argc, xargv) #else start1 (ignore, argc, xargv) #endif int argc; char *xargv; { register char **argv = &xargv; environ = argv + argc + 1; if ((char *)environ == xargv) environ--; #ifdef ON_EXIT #ifdef sun ON_EXIT (_cleanup, 0); #endif ON_EXIT (__do_global_cleanup, 0); #endif __do_global_init (); exit (main (argc, argv, environ)); } #endif /* m68k or m68000 or mc68000 or mc68020 or sun386 */ #endif /* not CRT0_DUMMIES */ /* Should "hp9000" be completely removed? */ #if defined(hp9000) || defined(hp9000s300) int argc_value; char **argv_value; #ifdef OLD_HP_ASSEMBLER asm(" text"); asm(" globl __start"); asm(" globl _exit"); asm(" globl _main"); asm("__start"); asm(" dc.l 0"); asm(" subq.w #0x1,d0"); asm(" move.w d0,float_soft"); asm(" move.l 0x4(a7),d0"); asm(" beq.s skip_1"); asm(" move.l d0,a0"); asm(" clr.l -0x4(a0)"); asm("skip_1"); asm(" move.l a7,a0"); asm(" subq.l #0x8,a7"); asm(" move.l (a0),(a7)"); asm(" move.l (a0),_argc_value"); asm(" addq.l #0x4,a0"); asm(" move.l a0,0x4(a7)"); asm(" move.l a0,_argv_value"); asm("incr_loop"); asm(" tst.l (a0)+"); asm(" bne.s incr_loop"); asm(" move.l 0x4(a7),a1"); asm(" cmp.l (a1),a0"); asm(" blt.s skip_2"); asm(" subq.l #0x4,a0"); asm("skip_2"); asm(" move.l a0,0x8(a7)"); asm(" move.l a0,_environ"); asm(" jsr ___do_global_init"); asm(" jsr _main"); asm(" addq.l #0x8,a7"); asm(" move.l d0,-(a7)"); asm(" jsr _exit"); asm(" move.w #0x1,d0"); asm(" trap #0x0"); asm(" comm float_soft,4"); /* float_soft is allocated in this way because C would put an underscore character in its name otherwise. */ #else /* new hp assembler */ asm(" text"); asm(" global __start"); asm(" global _exit"); asm(" global _main"); asm(" global flag_fpa,flag_68010,fpa_loc,float_loc"); asm("__start:"); asm(" byte 0,0,0,0"); asm(" sub.l %a6,%a6"); asm(" subq.w &1,%d0"); asm(" mov.w %d0,float_soft"); asm(" mov.w %d1,flag_68881"); asm(" beq.b skip_float"); asm(" fmov.l &0x7400,%fpcr"); asm("skip_float:"); asm(" move.l %a0,%d0"); asm(" add.l %d0,%d0"); asm(" subx.w %d1,%d1"); asm(" move.w %d1,flag_68010"); asm(" add.l %d0,%d0"); asm(" subx.w %d1,%d1"); asm(" move.w %d1,flag_fpa"); asm(" mov.l 4(%a7),%d0"); asm(" beq.b skip_1"); asm(" mov.l %d0,%a0"); asm(" clr.l -4(%a0)"); asm("skip_1:"); asm(" mov.l %a7,%a0"); asm(" subq.l &8,%a7"); asm(" mov.l (%a0),(%a7)"); asm(" mov.l (%a0),_argc_value"); asm(" addq.l &4,%a0"); asm(" mov.l %a0,4(%a7)"); asm(" mov.l %a0,_argv_value"); asm("incr_loop:"); asm(" tst.l (%a0)+"); asm(" bne.b incr_loop"); asm(" mov.l 4(%a7),%a1"); asm(" cmp.l %a0,(%a1)"); asm(" blt.b skip_2"); asm(" subq.l &4,%a0"); asm("skip_2:"); asm(" mov.l %a0,8(%a7)"); asm(" mov.l %a0,_environ"); asm(" jsr ___do_global_init"); asm(" jsr _main"); asm(" addq.l &8,%a7"); asm(" mov.l %d0,-(%a7)"); asm(" jsr _exit"); asm(" mov.w &1,%d0"); asm(" trap &0"); asm(" comm float_soft, 4"); asm(" comm flag_68881, 4"); asm(" comm flag_68010, 4"); asm(" comm flag_fpa, 4"); asm(" set float_loc,0xffffb000"); asm(" set fpa_loc,0xfff08000"); #endif /* new hp assembler */ #endif /* hp9000 */ #ifdef GOULD /* startup code has to be in near text rather than fartext as allocated by the C compiler. */ asm(" .text"); asm(" .align 2"); asm(" .globl __start"); asm(" .text"); asm("__start:"); /* setup base register b1 (function base). */ asm(" .using b1,."); asm(" tpcbr b1"); /* setup base registers b3 through b7 (data references). */ asm(" file basevals,b3"); /* setup base register b2 (stack pointer); it should be aligned on a 8-word boundary; but because it is pointing to argc, its value should be remembered (in r5). */ asm(" movw b2,r4"); asm(" movw b2,r5"); asm(" andw #~0x1f,r4"); asm(" movw r4,b2"); /* allocate stack frame to do some work. */ asm(" subea 16w,b2"); /* initialize signal catching for UTX/32 1.2; this is necessary to make restart from saved image work. */ asm(" movea sigcatch,r1"); asm(" movw r1,8w[b2]"); asm(" svc #1,#150"); /* setup address of argc for start1. */ asm(" movw r5,8w[b2]"); asm(" func #1,_start1"); asm(" halt"); /* space for ld to store base register initial values. */ asm(" .align 5"); asm("basevals:"); asm(" .word __base3,__base4,__base5,__base6,__base7"); static start1 (xargc) int *xargc; { register int argc; register char **argv; argc = *xargc; argv = (char **)(xargc) + 1; environ = argv + argc + 1; if (environ == argv) environ--; __do_global_init (); exit (main (argc, argv, environ)); } #endif /* GOULD */ #ifdef elxsi extern int errno; extern char **environ; _start() { errno = 0; environ = *(&environ + 8); _stdinit(); __do_global_init (); exit (main(*(&environ + 6), *(&environ + 7), environ)); } #endif /* elxsi */ #ifdef sparc asm (".global start"); asm (".text"); asm ("start:"); /* Set up `argc', `argv', and `envp' into local registers. */ asm (" mov 0, %fp"); asm (" ld [%sp + 64], %l0"); asm (" add %sp, 68, %l1"); asm (" sll %l0, 2, %l2"); asm (" add %l2, 4, %l2"); asm (" add %l1, %l2, %l2"); asm (" sethi %hi(_environ), %l3"); asm (" st %l2, [%l3+%lo(_environ)]"); #ifdef ON_EXIT #ifdef sun asm (" set __cleanup,%o0"); asm (" call _on_exit,0"); asm (" mov %g0,%o1"); #endif asm (" set ___do_global_cleanup,%o0"); asm (" call _on_exit,0"); asm (" mov %g0,%o1"); #endif /* Finish diddling with stack and call `__do_global_init'. */ asm (" andn %sp, 7, %sp"); asm (" sub %sp, 24, %sp"); asm (" call ___do_global_init"); /* Move `argc', `argv', and `envp' from locals to parameters for `main'. */ asm (" mov %l0,%o0"); asm (" mov %l1,%o1"); asm (" call _main"); asm (" mov %l2,%o2"); #ifndef ON_EXIT /* Save return value from `main', and call `__do_global_cleanup', if necessary. In any event, get return value from `main' into a safe register. */ asm (" call ___do_global_cleanup"); #endif asm (" mov %o0,%l0"); #ifdef ON_EXIT /* Call `exit' or `_exit' with return value from `main'. */ asm (" call _exit"); #else asm (" call __exit"); #endif asm (" mov %l0,%o0"); #endif /* sparc */ #ifndef sun /* For C++, calls to exit(3) must perform their cleanup duties. This means calling destructors on all of the items which need to have their destructors called. After calling these destructors, a call is made to _exit (2), which is serious business. */ void exit (status) int status; { __do_global_cleanup (); #if defined(hp9000s300) || defined(i386) || defined(ALTOS) || defined(vax) || defined(hp300) _cleanup (); #endif _exit (status); } #endif #if 0 static int _end_crt0 (); void __do_global_init () { extern void (*__CTOR_LIST__)(); register void (**ppf)() = &__CTOR_LIST__; register int *pi = (int *)ppf; #ifdef VIRTUAL_FUNCTION_MASK if ((int)_end_crt0 < VINDEX_MAX) { printf ("virtual function index too large--encroaches text space at address 0x%x\n", _end_crt0); abort (); } #else /* @@What to do for losing segmented architectures? */ #endif while (*pi++) { /* Losing PCC cannot handle this statement as (*ppf++)(). Pity. */ (*ppf)(); ppf++; } } typedef struct dtor_table_entry { struct dtor_table_entry *next; void (*fp)(); } dtor_table_entry; extern dtor_table_entry *__DTOR_LIST__; void __do_global_cleanup () { register int i; while (__DTOR_LIST__) { /* Prevent problems if a destructor should mistakenly call exit() by always consuming one entry per round. */ void (*fp)() = __DTOR_LIST__->fp; __DTOR_LIST__ = __DTOR_LIST__->next; (*fp)(); } } static int _end_crt0 () { } #else void __do_global_init () {} void __do_global_cleanup () {} #endif