DataMuseum.dk

top - metrics - download

    Length: 3260 (0xcbc)
    Types: TextFile
    Names: »ckdker.hlp«

└─⟦9ae75bfbd⟧ Bits:30007242 EUUGD3: Starter Kit
    └─⟦3da672b63⟧ »EurOpenD3/misc/kermit.tar.Z« 
        └─⟦126dd3ca0⟧ 
            └─⟦this⟧ »ckdker.hlp« 

TextFile

For help on running Kermit, see also ckdker.bld and ckdker.doc .  Also, read
the comments inside to the CLI files.  Some topics here are extracted from
ckdker.bld. 

ckdker.doc is a user document for C-Kermit on the DG, and it is specifically
relevant to AOS/VS.  ckdker.doc was derived from ckuker.doc, the document for
Unix Kermit in general.  The Kermit examples in the document are written so
that they perform the same function as the Unix examples, but using CLI syntax
and AOS/VS file naming and wildcards.


If you are using a non-DG device, as I often do, then issue this command:

     CHAR/ON/NAS
     
Then, Kermit will issue the proper on-screen delete characters.


If you are going to use the Kermit terminal emulator at higher baud rates, you
may need to set your interactive console for xon/xoff protocol.  Issue this
command: CHAR/ON/XIFC/XOFC.  This may help prevent loss of characters.  On a
TEK 4105, you could change your terminal setup to: FLAG IN/OUT.  The TEK
handles its xon/xoff protocol inside its firmware, so there is no need to set
CHAR/ON/XIFC/XOFC.   Handling the protocol by the terminal is preferable.


To run kermit, the syntax is:

     xeq kermit[/switches] [arguments]

If your installation has a kermit.cli file, you would enter:

     kermit[/switches] [arguments]

The allowable switches are described in ckdker.doc, as are the allowable
arguments.  But I would like to emphasize five key points, which are useful
for novice and for veteran C-Kermit users, and for anyone else who does not
like to read user manuals:

     1.  Try out this command for learning command line operation:

               xeq kermit -h

     2.  At the C-Kermit prompt, enter ? for the interactive options:

               C-Kermit>?

     3.  At any time that a partial or complete command is entered, enter a
         question mark:

               C-Kermit>se?
               C-Kermit>set ?

     4.  Good online help is available at the C-Kermit prompt:

               C-Kermit>help
               C-Kermit>help set
               C-Kermit>help set speed

     5.  Some error checking will keep you out of trouble, so play around with
         this program.  For example, at the C-Kermit prompt, if you enter:

               C-Kermit>set line @con5
               C-Kermit>send some_file_of_mine

          You get an error that you must set your 'speed' first.


The files in this distribution are described as follows (in alphabetical
order): 

     ckdbat.cli          A sample CLI to run a batch job
     ckdbat.run          The output from Kermit run in batch mode
     ckdcc.cli           Macro to compile a Kermit module
     ckdker.ann          Announcement of this version of Kermit
     ckdker.bld          Instructions on installing or adapting this Kermit
     ckdker.bwr          Known bugs and quirks
     ckdker.cli          Sample CLI for running Kermit on a DG
     ckdker.doc          Data General C-Kermit user document
     ckdker.hlp          This file
     ckdker.utl          Description of de-boo and utility files and sources
     ckdlnk.cli          Macro to link Kermit
     ckdmak.cli          Macro to Make Kermit from scratch
     ckdsrc.lis          List of all modules to compile, excepting ckwart.c