|
DataMuseum.dkPresents historical artifacts from the history of: RC4000/8000/9000 |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about RC4000/8000/9000 Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - download
Length: 66181 (0x10285)
Types: TextFile
Names: »TMSG.TXT«
└─⟦6b0c384a4⟧ Bits:30004163 SW9890I RC9000-10 Monitor Rel. 83.2
└─⟦this⟧ »TMSG.TXT«
/* generated on Thu Feb 29 16:09:36 GMT 1996 by henttext verison 1.5 */\r MODULE ioc901\r MSG 63 0 \r LINE "either of A18 or A19 are assumed stuck at zero"\r MSG 64 4 WORD WORD WORD WORD \r LINE "ram failure observed during address test. Contention between"\r LINE "address 1: sel.:%04xh - off.:%04xh and address 2: sel.:%04xh off.:%04xh"\r LINE "reading address 1, code for address 2 was read"\r MSG 65 4 WORD WORD BYTE BYTE \r LINE "ram failure observed during data test."\r LINE "sel.:%04xh - off.:%04xh - rec.:%02xh - exp.:%02xh"\r MSG 66 4 WORD WORD WORD WORD \r LINE "ram failure observed when checking word access at odd address."\r LINE "sel.:%04xh - off.:%04xh rec.:%04xh - exp.:%04xh"\r MSG 67 4 WORD WORD BYTE BYTE \r LINE "failure is observed, when testing parity gen/chk circuitry."\r LINE "Output from checker missing when testing low bytes."\r LINE "Sel.:%04xh off.:%04xh - test pattern: rec.:%02xh exp.:%02xh"\r MSG 68 4 WORD WORD BYTE BYTE \r LINE "failure is observed, when testing parity gen/chk circuitry."\r LINE "Output from checker missing when testing upper bytes."\r LINE "Sel.:%04xh off.:%04xh - test pattern: rec.:%02xh exp.:%02xh"\r MSG 69 4 WORD WORD WORD WORD \r LINE "failure when testing local time out (in sel.:%04xh - off.:%04xh)."\r LINE "NMI information rec.:%04xh, exp.:%04xh"\r MSG 15 0 \r LINE "Missing interrupt from timer 1"\r MSG 16 0 \r LINE "Watchdog timer does not move"\r MSG 20 0 \r LINE "System bus fifo for micro system is unable to request the bus."\r MSG 21 4 BYTE BYTE BYTE BYTE \r LINE "Data error is found in least significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 22 4 BYTE BYTE BYTE BYTE \r LINE "Data error is found in most significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%02xh - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 23 4 BYTE BYTE BYTE BYTE \r LINE "Data error found in external loop test of system bus fifo for the micro system."\r LINE "Format:%03d - byte no.:%03d, rec.:%02xh, exp.:%02xh"\r MSG 41 1 BYTE \r LINE "Checksum error in module type and serial number ROM."\r LINE "Calculated sum:%02xh"\r MSG 42 1 BYTE \r LINE "Checksum error in FCO ROM. Calculated sum:%02xh"\r MSG 44 2 WORD WORD \r LINE "Failure in module status register. Rec.:%04xh, exp.:%04xh"\r MSG 45 3 WORD WORD BYTE \r LINE "NMI error. NMI register. Rec.:%04xh, exp.:%04xh check point:%03d"\r MSG 30 3 WORD WORD WORD \r LINE "Data error is found in interrupt fifo test when check reading"\r LINE "level:%05d.Received data:%04xh, expected data:%04xh"\r MSG 31 0 \r LINE "Interrupt missing from interrupt fifo."\r MSG 50 7 BYTE WORD WORD BYTE BYTE BYTE BYTE \r LINE "Data error is found when check reading from system bus.(check point:%03d)"\r LINE "address high:%04xh address low:%04xh (test byte no:%03d)"\r LINE "rec.:%02xh, exp.:%02xh. Transfer format used:%03d"\r MSG 51 2 WORD WORD \r LINE "failure is observed when testing global time out."\r LINE "NMI information rec.:%04xh, exp.:%04xh."\r MSG 90 6 WORD WORD BYTE BYTE WORD WORD \r LINE "Data error is found when check reading from system bus."\r LINE "Failure in address high:%04xh low:%04xh, format no.:%03d."\r LINE "Double byte offset:%03d. Rec.:%04xh, exp.:%04xh."\r MSG 91 2 WORD WORD \r LINE "System bus time out received during limit check"\r LINE "global memory address high:%04xh address low:%04xh"\r MSG 165 3 WORD WORD WORD \r LINE "Data error is found in tridirectional fifo when check reading level"\r LINE "%05d. Received data:%04xh, expected data:%04xh"\r MSG 166 0 \r LINE "NMI interrupt missed during parity test"\r MSG 167 2 BYTE BYTE \r LINE "Wrong status when fifo filled. Rec.:%02xh, exp.:%02xh"\r MSG 168 2 BYTE BYTE \r LINE "Wrong status when fifo empty. Rec.:%02xh, exp.:%02xh"\r MSG 150 3 BYTE BYTE BYTE \r LINE "One of DMA System bus fifos are unable to request the bus."\r LINE "Information register rec.:%02xh exp.:%02xh, transfer format:%03d"\r MSG 151 3 BYTE BYTE BYTE \r LINE "Wrong DMA termination on word count during write."\r LINE "Status rec.:%02xh exp.:%02xh. Transfer format:%03d"\r MSG 152 1 BYTE \r LINE "DMA interrupt missing, when termination on word count during write."\r LINE "Transfer format:%03d"\r MSG 153 3 BYTE BYTE BYTE \r LINE "Wrong DMA termination on word count during read."\r LINE "status rec.:%02xh exp.:%02xh. Transfer format:%03d"\r MSG 154 1 BYTE \r LINE "DMA interrupt missing, when termination on word count during read."\r LINE "Transfer format:%03d"\r MSG 155 3 BYTE BYTE BYTE \r LINE "One of DMA System Bus Fifos are unable to remove Bus Request."\r LINE "Information reg. rec.:%02xh, exp.:%02xh. Transfer format:%03d"\r MSG 156 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Data error is found in least significant slice in system bus"\r LINE "interface for DMA during internal loop back test (SBF no.:%03d)."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 157 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Data error is found in most significant slice in system bus"\r LINE "interface for DMA during internal loop back test (SBF no.:%03d)."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 158 3 BYTE BYTE BYTE \r LINE "Wrong DMA termination on fifo empty during write."\r LINE "Status rec.:%02xh exp.:%02xh. Transfer format:%03d"\r MSG 159 1 BYTE \r LINE "DMA interrupt missing, when termination on fifo empty during write."\r LINE "Transfer format:%03d"\r MSG 160 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Data error found in external loop test of system bus fifo for DMA"\r LINE "Format no:%03d - byte no.:%03d, rec.:%02xh, exp.:%02xh, SBF no:%03d"\r MSG 161 2 BYTE BYTE \r LINE "Wrong status during initialization of DMA SBF. DMA status rec.:%02xh, exp.:%02xh"\r MSG 162 2 BYTE BYTE \r LINE "Wrong status during parity test of DMA transports. DMA status rec.:%02xh, exp.:%02xh"\r MSG 170 7 BYTE WORD WORD BYTE BYTE BYTE BYTE \r LINE "Data error is found when check reading from system bus.(check point:%03d)"\r LINE "address high:%04xh address low:%04xh (test byte no:%03d)"\r LINE "rec.:%02xh, exp.:%02xh. Transfer format:%03d"\r MSG 171 4 BYTE BYTE BYTE BYTE \r LINE "DMA did not terminate on word count during write (check point:%03d)"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r MSG 172 2 BYTE BYTE \r LINE "DMA interrupt missed when terminating on word count during write"\r LINE "Transfer format:%03d (check point:%03d)"\r MSG 173 4 BYTE BYTE BYTE BYTE \r LINE "DMA did not terminate on word count during read (check point:%03d)"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r MSG 174 2 BYTE BYTE \r LINE "DMA interrupt missed when terminating on word count during read"\r LINE "Format format:%03d (check point:%03d)"\r MSG 180 6 WORD WORD BYTE BYTE WORD WORD \r LINE "Data error is found when check reading from system bus."\r LINE "Failure in address high:%04xh low:%04xh, format no.:%03d."\r LINE "Double byte offset:%03d. Rec.:%04xh, exp.:%04xh."\r MSG 181 4 BYTE BYTE BYTE WORD \r LINE "DMA did not terminate on word count during read"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r LINE "DMA count value:%04xh"\r MSG 182 4 BYTE BYTE BYTE WORD \r LINE "DMA did not terminate on word count during write"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r LINE "DMA count value:%04xh"\r MSG 120 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Master failure in MAINT state. Sequence no:%03d, check point:%03d"\r LINE "Received master control signals:%08bb, bus A octet:%08bb"\r LINE "Expected master control signals:%08bb, bus A octet:%08bb"\r MSG 121 8 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d."\r LINE "The IPI channel could not return to IDLE (MAINT STATE)."\r LINE "Received control:%08bb, bus A:%08bb, bus B:%08bb"\r LINE "Expected control:%08bb, bus A:%08bb, bus B:%08bb"\r MSG 122 7 BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "The master could not enter REQUEST state."\r LINE "Received master control signals:%08bb, bus A octet:%08bb"\r LINE "Expected master control signals:%08bb, bus A octet:%08bb"\r MSG 123 7 BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "The master could not enter RESET SELECT state."\r LINE "Received master control signals:%08bb, bus A octet:%08bb"\r LINE "Expected master control signals:%08bb, bus A octet:%08bb"\r MSG 124 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "The IPI channel could not return to IDLE."\r LINE "Received control:%08bb, bus A:%08bb, bus B:%08bb"\r MSG 125 7 BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "Bus B octet rec.:%08bb, exp.:%08bb"\r LINE "slaves who are ready (bit significant):%08bb, valid code:%03d"\r MSG 126 4 BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d."\r LINE "Slaves expected to respond (bit significant):%08bb"\r LINE "Responding slaves (bit significant):%08bb"\r MSG 127 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d."\r LINE "The IPI channel could not return to IDLE."\r LINE "Received control:%08bb, bus A:%08bb, bus B:%08bb"\r MSG 128 7 BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "Status interrupt missing."\r LINE "Received control:%08bb status:%08bb bus A:%08bb, bus B:%08bb"\r MSG 129 3 BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d."\r LINE "B octet missing from slave number :%03d."\r MSG 130 7 BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "Failure in SLAVACK state"\r LINE "received control lines:%08bb, bus A:%08bb"\r LINE "expected control lines:%08bb, bus A:%08bb"\r MSG 131 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "Bus B octet rec.:%08bb, exp.:%08bb"\r MSG 132 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "Failure in SLAVEND state"\r LINE "Received control:%08bb, expected control:%08bb"\r MSG 133 9 BYTE BYTE WORD WORD WORD WORD WORD WORD WORD \r LINE "Error in NOP respond packet from slave number:%03d"\r LINE "Received respond packet (check point:%03d):"\r LINE "%04xh %04xh %04xh %04xh %04xh %04xh %04xh"\r MSG 134 2 BYTE BYTE \r LINE "Missing attention interrupt from slave no.:%03d (check point:%03d)."\r MSG 135 3 BYTE BYTE BYTE \r LINE "Missing attention in from slave no.:%03d (check point:%03d)."\r LINE "Received status:%02xh"\r MSG 136 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Wrong status found in sequence no:%03d, check point:%03d, slave no.:%03d"\r LINE "Received status:%08bb, control:%08bb, bus A:%08bb"\r MSG 137 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Sequence no:%03d, check point:%03d, slave no:%03d."\r LINE "Failure in SLAVACK state"\r LINE "control lines received:%08bb, expected:%08bb"\r MSG 200 2 BYTE BYTE \r LINE "Time out when waiting for attention interrupt from slave no.:%03d"\r LINE "(check point:%03d)."\r MSG 201 8 BYTE BYTE WORD WORD WORD WORD WORD WORD \r LINE "Error in TEST respond packet from slave number:%03d"\r LINE "Received respond packet (check point:%03d): %04xh %04xh %04xh %04xh %04xh %04xh"\r MSG 202 7 BYTE WORD WORD WORD WORD WORD WORD \r LINE "Data error is found when testing with slave no.:%03d"\r LINE "Global memory start address high:%04xh, low:%04xh"\r LINE "Global memory error address high:%04xh, low:%04xh"\r LINE "Test pattern received:%04xh, expected:%04xh"\r MSG 203 8 BYTE BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "Wrong DMA status received after a read termination"\r LINE "(check point:%03d, slave no.:%03d)."\r LINE "DMA status rec.:%02xh, exp.:%02xh, IPI status rec.:%02xh, IPI control rec.:%02xh"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 204 8 BYTE BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "Wrong IPI status received after a data out transfer"\r LINE "(check point:%03d, slave no.:%03d)."\r LINE "IPI status rec.:%02xh, exp.:%02xh DMA status rec.:%02xh, IPI control rec.:%02xh"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 205 7 BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "DMA interrupt missing during read (check point:%03d, slave no.:%03d)"\r LINE "DMA status rec.:%02xh. IPI status rec.:%02xh, IPI control rec:%02xh,"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 206 7 BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "IPI interrupt missing during data transfer out (check point:%03d slave no.:%03d)"\r LINE "DMA status rec.:%02xh. IPI status rec.:%02xh, IPI control rec:%02xh,"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 207 8 BYTE BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "Wrong DMA status received after a write termination"\r LINE "(check point:%03d, slave no.:%03d)"\r LINE "DMA status rec.:%02xh, exp.:%02xh. IPI status rec.:%02xh IPI control rec.:%02xh"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 208 8 BYTE BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "Wrong IPI status received after a data in transfer"\r LINE "(check point:%03d, slave no.:%03d)."\r LINE "IPI status rec.:%02xh, exp.:%02xh, DMA status rec.:%02xh, IPI control rec.:%02xh"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 209 7 BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "Time out on DMA transport during write (check point:%03d slave no.:%03d)"\r LINE "DMA status rec.:%02xh. IPI status rec.:%02xh, IPI control rec.:%02xh"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 210 7 BYTE BYTE BYTE BYTE BYTE BYTE WORD \r LINE "IPI Time out during data transfer in (check point:%03d slave no.:%03d)"\r LINE "DMA status rec.:%02xh. IPI status rec.:%02xh, IPI control rec.:%02xh"\r LINE "DMA cycle:%03d, DMA count value:%04xh"\r MSG 100 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Failure found in Sequence no.:%03d, check point:%03d. "\r LINE "received control:%08bb, bus A octet:%08bb"\r LINE "expected control:%08bb, bus A octet:%08bb"\r MSG 101 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Wrong status received in sequence no.:%03d, check point:%03d."\r LINE "received status:%08bb, control:%08bb, bus A octet:%08bb"\r MSG 102 2 BYTE BYTE \r LINE "Missing status interrupt in sequence no.:%03d, check point:%03d."\r MSG 103 4 BYTE BYTE BYTE BYTE \r LINE "Failure found in Sequence no.:%03d, check point:%03d. "\r LINE "Control lines rec.:%08bb, exp.:%08bb"\r MSG 104 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Error found during cable test:"\r LINE "Received status:%08bb, control lines:%08bb, bus B:%08bb"\r LINE "Expected status:%08bb, control lines:%08bb, bus B:%08bb"\r MSG 105 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Error found during cable test."\r LINE "received bus A:%08bb, bus B:%08bb, control lines:%08bb"\r LINE "expected bus A:%08bb, bus B:%08bb, control lines:%08bb"\r MSG 106 0 \r LINE "Error found during cable test."\r LINE "Missing attention_in interrupt from IPI bus"\r /* generated on Thu Feb 29 16:10:19 GMT 1996 by henttext verison 1.5 */\r MODULE ioc911\r MSG 63 0 \r LINE "either of A18 or A19 are assumed stuck at zero"\r MSG 64 4 WORD WORD WORD WORD \r LINE "ram failure observed during address test. Contention between"\r LINE "address 1: sel.:%04xh - off.:%04xh and address 2: sel.:%04xh off.:%04xh"\r LINE "reading address 1, code for address 2 was read"\r MSG 65 4 WORD WORD BYTE BYTE \r LINE "ram failure observed during data test."\r LINE "sel.:%04xh - off.:%04xh - rec.:%02xh - exp.:%02xh"\r MSG 66 4 WORD WORD WORD WORD \r LINE "ram failure observed when checking word access at odd address."\r LINE "sel.:%04xh - off.:%04xh rec.:%04xh - exp.:%04xh"\r MSG 67 4 WORD WORD BYTE BYTE \r LINE "failure is observed, when testing parity gen/chk circuitry."\r LINE "Output from checker missing when testing low bytes."\r LINE "Sel.:%04xh off.:%04xh - test pattern: rec.:%02xh exp.:%02xh"\r MSG 68 4 WORD WORD BYTE BYTE \r LINE "failure is observed, when testing parity gen/chk circuitry."\r LINE "Output from checker missing when testing upper bytes."\r LINE "Sel.:%04xh off.:%04xh - test pattern: rec.:%02xh exp.:%02xh"\r MSG 69 4 WORD WORD WORD WORD \r LINE "failure when testing local time out (in sel.:%04xh - off.:%04xh)."\r LINE "NMI information rec.:%04xh, exp.:%04xh"\r MSG 15 0 \r LINE "Missing interrupt from timer 1"\r MSG 16 0 \r LINE "Watchdog timer does not move"\r MSG 20 0 \r LINE "System bus fifo for micro system is unable to request the bus."\r MSG 21 4 BYTE BYTE BYTE BYTE \r LINE "Data error is found in least significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 22 4 BYTE BYTE BYTE BYTE \r LINE "Data error is found in most significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%02xh - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 23 4 BYTE BYTE BYTE BYTE \r LINE "Data error found in external loop test of system bus fifo for the micro system."\r LINE "Format:%03d - byte no.:%03d, rec.:%02xh, exp.:%02xh"\r MSG 41 1 BYTE \r LINE "Checksum error in module type and serial number ROM."\r LINE "Calculated sum:%02xh"\r MSG 42 1 BYTE \r LINE "Checksum error in FCO ROM. Calculated sum:%02xh"\r MSG 44 2 WORD WORD \r LINE "Failure in module status register. Rec.:%04xh, exp.:%04xh"\r MSG 45 3 WORD WORD BYTE \r LINE "NMI error. NMI register. Rec.:%04xh, exp.:%04xh check point:%03d"\r MSG 30 3 WORD WORD WORD \r LINE "Data error is found in interrupt fifo test when check reading"\r LINE "level:%05d.Received data:%04xh, expected data:%04xh"\r MSG 31 0 \r LINE "Interrupt missing from interrupt fifo."\r MSG 50 7 BYTE WORD WORD BYTE BYTE BYTE BYTE \r LINE "Data error is found when check reading from system bus.(check point:%03d)"\r LINE "address high:%04xh address low:%04xh (test byte no:%03d)"\r LINE "rec.:%02xh, exp.:%02xh. Transfer format used:%03d"\r MSG 51 2 WORD WORD \r LINE "failure is observed when testing global time out."\r LINE "NMI information rec.:%04xh, exp.:%04xh."\r MSG 90 6 WORD WORD BYTE BYTE WORD WORD \r LINE "Data error is found when check reading from system bus."\r LINE "Failure in address high:%04xh low:%04xh, format no.:%03d."\r LINE "Double byte offset:%03d. Rec.:%04xh, exp.:%04xh."\r MSG 91 2 WORD WORD \r LINE "System bus time out received during limit check"\r LINE "global memory address high:%04xh address low:%04xh"\r MSG 165 3 WORD WORD WORD \r LINE "Data error is found in tridirectional fifo when check reading level"\r LINE "%05d. Received data:%04xh, expected data:%04xh"\r MSG 166 0 \r LINE "NMI interrupt missed during parity test"\r MSG 167 2 BYTE BYTE \r LINE "Wrong status when fifo filled. Rec.:%02xh, exp.:%02xh"\r MSG 168 2 BYTE BYTE \r LINE "Wrong status when fifo empty. Rec.:%02xh, exp.:%02xh"\r MSG 150 3 BYTE BYTE BYTE \r LINE "One of DMA System bus fifos are unable to request the bus."\r LINE "Information register rec.:%02xh exp.:%02xh, transfer format:%03d"\r MSG 151 3 BYTE BYTE BYTE \r LINE "Wrong DMA termination on word count during write."\r LINE "Status rec.:%02xh exp.:%02xh. Transfer format:%03d"\r MSG 152 1 BYTE \r LINE "DMA interrupt missing, when termination on word count during write."\r LINE "Transfer format:%03d"\r MSG 153 3 BYTE BYTE BYTE \r LINE "Wrong DMA termination on word count during read."\r LINE "status rec.:%02xh exp.:%02xh. Transfer format:%03d"\r MSG 154 1 BYTE \r LINE "DMA interrupt missing, when termination on word count during read."\r LINE "Transfer format:%03d"\r MSG 155 3 BYTE BYTE BYTE \r LINE "One of DMA System Bus Fifos are unable to remove Bus Request."\r LINE "Information reg. rec.:%02xh, exp.:%02xh. Transfer format:%03d"\r MSG 156 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Data error is found in least significant slice in system bus"\r LINE "interface for DMA during internal loop back test (SBF no.:%03d)."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 157 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Data error is found in most significant slice in system bus"\r LINE "interface for DMA during internal loop back test (SBF no.:%03d)."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 158 3 BYTE BYTE BYTE \r LINE "Wrong DMA termination on fifo empty during write."\r LINE "Status rec.:%02xh exp.:%02xh. Transfer format:%03d"\r MSG 159 1 BYTE \r LINE "DMA interrupt missing, when termination on fifo empty during write."\r LINE "Transfer format:%03d"\r MSG 160 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Data error found in external loop test of system bus fifo for DMA"\r LINE "Format no:%03d - byte no.:%03d, rec.:%02xh, exp.:%02xh, SBF no:%03d"\r MSG 161 2 BYTE BYTE \r LINE "Wrong status during initialization of DMA SBF. DMA status rec.:%02xh, exp.:%02xh"\r MSG 162 2 BYTE BYTE \r LINE "Wrong status during parity test of DMA transports. DMA status rec.:%02xh, exp.:%02xh"\r MSG 170 7 BYTE WORD WORD BYTE BYTE BYTE BYTE \r LINE "Data error is found when check reading from system bus.(check point:%03d)"\r LINE "address high:%04xh address low:%04xh (test byte no:%03d)"\r LINE "rec.:%02xh, exp.:%02xh. Transfer format:%03d"\r MSG 171 4 BYTE BYTE BYTE BYTE \r LINE "DMA did not terminate on word count during write (check point:%03d)"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r MSG 172 2 BYTE BYTE \r LINE "DMA interrupt missed when terminating on word count during write"\r LINE "Transfer format:%03d (check point:%03d)"\r MSG 173 4 BYTE BYTE BYTE BYTE \r LINE "DMA did not terminate on word count during read (check point:%03d)"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r MSG 174 2 BYTE BYTE \r LINE "DMA interrupt missed when terminating on word count during read"\r LINE "Format format:%03d (check point:%03d)"\r MSG 180 6 WORD WORD BYTE BYTE WORD WORD \r LINE "Data error is found when check reading from system bus."\r LINE "Failure in address high:%04xh low:%04xh, format no.:%03d."\r LINE "Double byte offset:%03d. Rec.:%04xh, exp.:%04xh."\r MSG 181 4 BYTE BYTE BYTE WORD \r LINE "DMA did not terminate on word count during read"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r LINE "DMA count value:%04xh"\r MSG 182 4 BYTE BYTE BYTE WORD \r LINE "DMA did not terminate on word count during write"\r LINE "status rec.:%02xh exp.:%02xh, transfer format:%03d"\r LINE "DMA count value:%04xh"\r MSG 190 6 BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Wrong drive type, vendor id is:(in ASCII)"\r LINE "%02xh"\r LINE "%02xh"\r LINE "%02xh"\r LINE "%02xh"\r LINE "%02xh"\r LINE "%02xh"\r MSG 191 9 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD BYTE \r LINE "Error during selection of target"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r LINE "Target no.:%03d"\r MSG 194 9 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD BYTE \r LINE "CHECK CONDITION on REQUEST SENSE command"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r LINE "Original erroneous command:%02xh"\r MSG 195 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 196 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Unexpected target status"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 197 9 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD BYTE \r LINE "Last message not MESSAGE COMPLETE"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r LINE "Message:%02xh"\r MSG 198 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Unexpected SCSI phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 199 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "ASC register error during DATA OUT phase "\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 200 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Terminal Count in ASC not present in status phase "\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 201 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "TARGET has detected parity error in command phase(restore ptr rec.)"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 202 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "ASC register error during DATA IN phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 203 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "SCSI parity error in MESSAGE IN phase before message accepted"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 204 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "ASC register error in MESSAGE IN phase before message accepted"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 205 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "SCSI bus parity error in MESSAGE IN phase after message accepted"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 206 1 BYTE \r LINE "Wrong target reselected, SCSI bus ID during reselection:%02xh,"\r MSG 207 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "SCSI interrupt timeout"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 208 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "SCSI bus parity error in STATUS phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 209 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Target has illegally entered disconnected state"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 210 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "SCSI bus parity error in DATA IN phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 211 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Message out without ATN, TARGET has detected parity error"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 212 9 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD BYTE \r LINE "System bus error during DMA transfer"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r LINE "DMA status:%02xh"\r MSG 213 9 BYTE WORD WORD WORD WORD WORD WORD WORD WORD \r LINE "Data error is found when testing target no.:%03d"\r LINE "Global memory start address high:%04xh, low:%04xh"\r LINE "Global memory error address high:%04xh, low:%04xh"\r LINE "Test pattern received:%04xh, expected:%04xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 214 9 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD WORD \r LINE "DMA word count not zero, checked in STATUS phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r LINE "DMA count:%04xh"\r MSG 215 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "TRI FIFO never empties in DATA IN phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 216 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Odd number of bytes in data transfer"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 217 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Target BUSY too long"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 218 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "ASC register error in separate COMMAND phase"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 219 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "Block count per command too high"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 220 9 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD BYTE \r LINE "Whole command not received by target,possibly due to parity error"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r LINE "Target no.:%03d"\r MSG 221 8 BYTE WORD BYTE BYTE BYTE BYTE WORD WORD \r LINE "SCSI BUS RESET received"\r LINE "Command:%02xh, Param adr:%04xh, Status:%02xh, ASC stat:%02xh, ASC seq:%02xh, ASC int:%02xh"\r LINE "First logical block in command:%04xh%04xh"\r MSG 222 1 BYTE \r LINE "TARGET no. %02xh is not a disk!"\r MSG 223 1 BYTE \r LINE "TARGET no. %02xh is not a tape drive!"\r MSG 224 0 \r LINE "Parameter error, no retention with EXABYTE!"\r MSG 225 0 \r LINE "Parameter error, only MEDIUM access with EXABYTE!"\r MSG 230 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: No Sense"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 231 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Recovered Error"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 232 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Not Ready"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 233 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Medium Error"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 234 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Hardware Error"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 235 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Illegal Request"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 236 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Unit Attention"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 237 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Data Protect"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 238 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Blank Check"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 239 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Vendor Unique"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 240 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Copy Aborted"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 241 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Aborted Command"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 242 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Equal"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 243 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Volume Overflow"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 244 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Miscompare"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 245 15 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "Check condition on Command:%02xh, SENSE KEY: Reserved"\r LINE "Sense data 0:%02xh 1:%02xh 2:%02xh 3:%02xh 4:%02xh 5:%02xh 6:%02xh 7:%02xh "\r LINE " 8:%02xh 9:%02xh A:%02xh B:%02xh C:%02xh D:%02xh "\r MSG 251 2 WORD WORD \r LINE "Address of last block to test: (HEX) %04xh%04xh"\r MSG 252 1 BYTE \r LINE "Disk drive (target no:%02xh) is being formatted"\r MSG 253 2 WORD WORD \r LINE "Writing block no:%04xh%04xh"\r MSG 254 2 WORD WORD \r LINE "Reading block no:%04xh%04xh"\r MSG 100 2 BYTE BYTE \r LINE "SCSI-Controller FIFO counter error"\r LINE "FIFO flags contents: %02xh expected: %02xh"\r MSG 101 2 BYTE BYTE \r LINE "SCSI-Controller FIFO data error"\r LINE "Received FIFO data: %02xh expected: %02xh"\r MSG 102 2 WORD WORD \r LINE "SCSI-Controller DMA Counter error"\r LINE "Received DMA Count: %04xh expected: %04xh"\r MSG 103 4 BYTE BYTE BYTE BYTE \r LINE "Missing illegal command interrupt from scsi controller"\r LINE "Received interrupt register contents: %02xh expected: %02xh"\r LINE "Received status register contents: %02xh"\r LINE "Received sequence step register: %02xh"\r MSG 104 4 BYTE BYTE BYTE BYTE \r LINE "Missing disconnected interrupt from scsi controller"\r LINE "Received interrupt register contents: %02xh expected: %02xh"\r LINE "Received status register contents: %02xh"\r LINE "Received sequence step register: %02xh"\r MSG 105 4 BYTE BYTE BYTE BYTE \r LINE "Disconnected interrupt received before duration of 150ms"\r LINE "Received interrupt register contents: %02xh expected: %02xh"\r LINE "Received status register contents: %02xh"\r LINE "Received sequence step register: %02xh"\r MSG 126 8 BYTE BYTE BYTE BYTE BYTE BYTE BYTE BYTE \r LINE "SCSI-Controller register error"\r LINE "Command register data received: %08bb expected: %08bb"\r LINE "Config1 register data received: %08bb expected: %08bb"\r LINE "Config2 register data received: %08bb expected: %08bb"\r LINE "Config3 register data received: %08bb expected: %08bb"\r MSG 130 5 BYTE BYTE BYTE BYTE BYTE \r LINE "Missing scsi interrupt after command: %02xh"\r LINE "Received interrupt register contents: %02xh expected: %02xh"\r LINE "Received status register contents: %02xh"\r LINE "Received sequence step register: %02xh"\r MSG 131 2 BYTE BYTE \r LINE "Data error in data out sequence"\r LINE "Received data: %02xh expected data: %02xh"\r MSG 132 2 BYTE BYTE \r LINE "Parity error detected in data out sequence"\r LINE "Received data: %02xh expected data: %02xh"\r MSG 133 0 \r LINE "Triport-FIFO not empty after data out sequence"\r MSG 134 2 BYTE BYTE \r LINE "Data error in data in sequence"\r LINE "Received data: %02xh expected data: %02xh"\r MSG 135 1 BYTE \r LINE "Parity error detected in data in sequence"\r LINE "SCSI data byte: %02xh"\r MSG 136 0 \r LINE "Triport-FIFO not full after data in sequence"\r MSG 137 2 WORD WORD \r LINE "Test target timeout on SCSI channel"\r LINE "Received SCSI test control register: %04xh expected: %04xh"\r MSG 138 0 \r LINE "Own IOC failed to win arbitration on SCSI channel during timeout period"\r /* generated on Thu Feb 29 16:11:01 GMT 1996 by henttext verison 1.5 */\r MODULE dlc901\r MSG 63 0 \r LINE "either of A18 or A19 are assumed stuck at zero"\r MSG 64 4 WORD WORD WORD WORD \r LINE "ram failure observed during address test. Contention between"\r LINE "address 1: sel.:%04xh - off.:%04xh and address 2: sel.:%04xh off.:%04xh"\r LINE "reading address 1, code for address 2 was read"\r MSG 65 4 WORD WORD BYTE BYTE \r LINE "ram failure observed during data test."\r LINE "sel.:%04xh - off.:%04xh - rec.:%02xh - exp.:%02xh"\r MSG 66 4 WORD WORD WORD WORD \r LINE "ram failure observed when checking word access at odd address."\r LINE "sel.:%04xh - off.:%04xh rec.:%04xh - exp.:%04xh"\r MSG 67 4 WORD WORD BYTE BYTE \r LINE "failure is observed, when testing parity gen/chk circuitry."\r LINE "Output from checker missing when testing low bytes."\r LINE "Sel.:%04xh off.:%04xh - test pattern: rec.:%02xh exp.:%02xh"\r MSG 68 4 WORD WORD BYTE BYTE \r LINE "failure is observed, when testing parity gen/chk circuitry."\r LINE "Output from checker missing when testing upper bytes."\r LINE "Sel.:%04xh off.:%04xh - test pattern: rec.:%02xh exp.:%02xh"\r MSG 69 4 WORD WORD WORD WORD \r LINE "failure when testing local time out (in sel.:%04xh - off.:%04xh)."\r LINE "NMI information rec.:%04xh, exp.:%04xh"\r MSG 15 0 \r LINE "Missing interrupt from timer 1"\r MSG 16 0 \r LINE "Watchdog timer does not move"\r MSG 20 0 \r LINE "System bus fifo for micro system is unable to request the bus."\r MSG 21 4 BYTE BYTE BYTE BYTE \r LINE "Data error is found in least significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 22 4 BYTE BYTE BYTE BYTE \r LINE "Data error is found in most significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%02xh - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 23 4 BYTE BYTE BYTE BYTE \r LINE "Data error found in external loop test of system bus fifo for the micro system."\r LINE "Format:%03d - byte no.:%03d, rec.:%02xh, exp.:%02xh"\r MSG 30 3 WORD WORD WORD \r LINE "Data error is found in interrupt fifo test when check reading"\r LINE "level:%05d.Received data:%04xh, expected data:%04xh"\r MSG 31 0 \r LINE "Interrupt missing from interrupt fifo."\r MSG 41 1 BYTE \r LINE "Checksum error in module type and serial number ROM."\r LINE "Calculated sum:%02xh"\r MSG 42 1 BYTE \r LINE "Checksum error in FCO ROM. Calculated sum:%02xh"\r MSG 44 2 WORD WORD \r LINE "Failure in module status register. Rec.:%04xh, exp.:%04xh"\r MSG 45 3 WORD WORD BYTE \r LINE "NMI error. NMI register. Rec.:%04xh, exp.:%04xh check point:%03d"\r MSG 50 7 BYTE WORD WORD BYTE BYTE BYTE BYTE \r LINE "Data error is found when check reading from system bus.(check point:%03d)"\r LINE "address high:%04xh address low:%04xh (test byte no:%03d)"\r LINE "rec.:%02xh, exp.:%02xh. Transfer format used:%03d"\r MSG 51 2 WORD WORD \r LINE "failure is observed when testing global time out."\r LINE "NMI information rec.:%04xh, exp.:%04xh."\r MSG 90 6 WORD WORD BYTE BYTE WORD WORD \r LINE "Data error is found when check reading from system bus."\r LINE "Failure in address high:%04xh low:%04xh, format no.:%03d."\r LINE "Double byte offset:%03d. Rec.:%04xh, exp.:%04xh."\r MSG 91 2 WORD WORD \r LINE "System bus time out received during limit check"\r LINE "global memory address high:%04xh address low:%04xh"\r MSG 120 4 WORD WORD WORD WORD \r LINE "LAN BUFs data error: sel.:%04xh - offs.:%04xh - exp.:%04xh - rec.:%04xh"\r MSG 121 4 WORD WORD WORD WORD \r LINE "LAN BUFs addr error: sel.:%04xh - offs.:%04xh - exp.:%04xh - rec.:%04xh"\r MSG 100 3 BYTE WORD WORD \r LINE "LAN #%03d:Cannot initialize the 82586, ISCB busy %04xh, SCB status %04xh"\r LINE " (possibly due to absence of Transmit clock)"\r MSG 101 3 BYTE BYTE WORD \r LINE "LAN #%03d:Check point <%03d>:Command Unit unable to accept a command."\r LINE " SCB status %04xh."\r MSG 102 4 BYTE BYTE WORD WORD \r LINE "LAN #%03d:Check point <%03d>: It takes too long to complete a Command "\r LINE "- SCB status %04xh, CB.status=%04xh."\r MSG 103 1 BYTE \r LINE "LAN #%03d:Fault detected by diagnostic command."\r MSG 104 5 BYTE BYTE WORD WORD WORD \r LINE "LAN #%03d:Check point <%03d>:Incomplete reception - SCB status %04xh"\r LINE " - FD1.status %04xh - FD2.status %04xh."\r MSG 105 6 BYTE BYTE BYTE WORD WORD WORD \r LINE "LAN #%03d:Check point <%03d>:data error at addr.%02xh%04xh "\r LINE "- exp.:%04xh - recv.:%04xh."\r MSG 106 5 BYTE BYTE WORD WORD WORD \r LINE "LAN #%03d:Check point <%03d>:Erroneous completion of Command "\r LINE "- SCB status %04xh - CB command %04xh - CB.status=%04xh."\r MSG 107 5 BYTE BYTE WORD WORD WORD \r LINE "LAN #%03d:Check point <%03d>:Missing Command Unit interrupt "\r LINE "- SCB status %04xh - CB command %04xh - CB.status=%04xh."\r MSG 108 5 BYTE BYTE WORD WORD WORD \r LINE "LAN #%03d:Check point <%03d>:Erroneous frame reception"\r LINE " - SCB status %04xh - FD1.status %04xh - FD2.status %04xh."\r MSG 109 5 BYTE BYTE WORD WORD WORD \r LINE "LAN #%03d:Check point <%03d>:Missing Receiver Unit interrupt "\r LINE " - SCB status %04xh - FD1.status %04xh - FD2.status %04xh."\r MSG 129 0 \r LINE "ICB Board missing "\r MSG 130 3 BYTE BYTE BYTE \r LINE "Write error: mode %03d - format %03d - missing TRQ2 DMA_status=%08bb."\r MSG 131 3 BYTE BYTE BYTE \r LINE "Write error: mode %03d - format %03d - missing int. DMA_status=%08bb."\r MSG 132 3 BYTE BYTE BYTE \r LINE "Read error: mode %03d - format %03d - missing TRQ2 DMA_status=%08bb."\r MSG 133 3 BYTE BYTE BYTE \r LINE "Read error: mode %03d - format %03d - missing int. DMA_status=%08bb."\r MSG 134 8 BYTE BYTE WORD WORD WORD BYTE BYTE BYTE \r LINE "Data error: mode:%03d - format %03d system "\r LINE "addr.:%04xh%04xh - buffer addr.:%04xh - byte no.:%03d -exp.:%02xh -rec.:%02xh."\r MSG 140 2 BYTE BYTE \r LINE "Status error when writting format %03d DMA status reg. = %08bb"\r LINE "interpreted in format Æ<FIELD:BIT WIDTH>Å as:"\r LINE "<irrelevant:1></TRQ2:1><irrelevant:2></DONE:1></TMO:1></ST1:1></ST0:1>"\r MSG 141 2 BYTE BYTE \r LINE "Missing interrupt when writting format %03d DMA status reg. = %08bb"\r LINE " interpreted in format Æ<FIELD:BIT WIDTH>Å as:"\r LINE "<irrelevant:1></TRQ2:1><irrelevant:2></DONE:1></TMO:1></ST1:1></ST0:1>"\r MSG 142 2 BYTE BYTE \r LINE "Status error when reading format %03d DMA status reg. = %08bb"\r LINE " interpreted in format Æ<FIELD:BIT WIDTH>Å as:"\r LINE "<irrelevant:1></TRQ2:1><irrelevant:2></DONE:1></TMO:1></ST1:1></ST0:1>"\r MSG 143 2 BYTE BYTE \r LINE "Missing interrupt when reading format %03d DMA status reg. = %08bb"\r LINE " interpreted in format Æ<FIELD:BIT WIDTH>Å as:"\r LINE "<irrelevant:1></TRQ2:1><irrelevant:2></DONE:1></TMO:1></ST1:1></ST0:1>"\r MSG 144 10 BYTE WORD WORD WORD BYTE WORD BYTE WORD WORD WORD \r LINE "Data error detected when testing format %03d at offset.:%04xh within"\r LINE " the size of accessed transfer format. System base addr. used %04xh%04xh"\r LINE " Write buffer nr./addr.:%03d/%04xh - read buffer nr./addr.:%03d/%04xh"\r LINE " Intel data word exp.:%04xh - rec.:%04xh."\r /* @(#)TUNKNOWN.TXT 1.3 (RC International) 11/28/90 */\r /* @(#)Text general test messages on the SSP*/\r \r MODULE UNKNOWN\r MSG 0 0\r LINE "Test was successful."\r MSG 1 0\r LINE "No such test on this module."\r MSG 2 15 WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD \r LINE "Illegal Parameters %04xh %04xh %04xh %04xh %04xh %04xh %04xh %04xh" \r LINE " %04xh %04xh %04xh %04xh %04xh %04xh %04xh"\r MSG 9 3 WORD WORD WORD\r LINE "Unexpected NMI received. NMI register=%04xh, CS:IP=%04xh:%04xh)."\r MSG 250 0\r LINE " %2d:%02d:%02d %2d %s %4d - %s (Slot %d) %s TEST %d info mess. %d."\r MSG 251 0\r LINE " %2d:%02d:%02d %2d %s %4d - %s (Slot %d) SSP based %s test error %d."\r MSG 252 0\r LINE " %2d:%02d:%02d %2d %s %4d - %s test error %d."\r MSG 253 0\r LINE " %2d:%02d:%02d %2d %s %4d - %s (Slot %d) %s TEST %d error %d."\r MSG 254 0\r LINE "*** Message(s) missing due to overrun."\r MSG 255 15 WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD\r LINE "No text for this message %04xh %04xh %04xh %04xh %04xh %04xh %04xh %04xh"\r LINE " %04xh %04xh %04xh %04xh %04xh %04xh %04xh" \r \r /* @(#)TEMPTY.TXT 1.14 (RC International) 9/14/92 */\r /* @(#)Text for SSP based tests */\r MODULE empty\r \r /* messages for system bus fifo tests */\r \r MSG 20 0 \r LINE "System bus fifo for micro system is unable to request the bus."\r MSG 21 4 BYTE BYTE BYTE BYTE\r LINE "Data error is found in least significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 22 4 BYTE BYTE BYTE BYTE\r LINE "Data error is found in most significant slice in system bus"\r LINE "interface for micro system during internal loop back test."\r LINE "Format no:%03d - byte no:%03d - rec.:%02xh - exp.:%02xh"\r MSG 23 4 BYTE BYTE BYTE BYTE\r LINE "Data error found in external loop test of system bus fifo for the micro system"\r LINE "Format:%03d - byte no.:%03d, rec.:%02xh, exp.:%02xh"\r \r /* messages for interrupt fifo tests */\r \r MSG 30 3 WORD WORD WORD\r LINE "Data error is found in interrupt fifo when check reading"\r LINE "level:%05d. Received data:%04xh, expected data:%04xh"\r MSG 31 0\r LINE "Interrupt missing from interrupt fifo."\r MSG 32 0\r LINE "Module interrupt fifo is unable to set busy status".\r MSG 33 4 WORD WORD WORD WORD\r LINE "Data error is found in interrupt fifo at checkpoint:%03d."\r LINE "In level:%05d. Received data:%04xh, expected data:%04xh"\r \r /* messages for slave interface tests */\r \r MSG 40 1 BYTE \r LINE "Checksum error in module type and serial number PROM."\r LINE "Calculated sum:%02xh"\r MSG 41 1 BYTE \r LINE "Checksum error in FCO PROM. Calculated sum:%02xh"\r MSG 42 2 WORD WORD\r LINE "Failure in module status register. Rec.:%04xh, exp.:%04xh"\r MSG 43 1 WORD\r LINE "System bus time out occured at check point:%03d"\r MSG 44 3 WORD WORD WORD\r LINE "Failure in module status register at check point:%03d."\r LINE "Module status register Rec.:%04xh, exp.:%04xh."\r /* messages for CPU901 */\r MSG 48 3 WORD WORD WORD\r LINE "Wrong message register contents at check point:%03d."\r LINE "Value received:%03d, expected:%03d." \r \r /* messages for backplane test */\r \r MSG 50 1 WORD\r LINE "Bus snooping circuitry remains not ready (check point %03d)"\r MSG 51 1 WORD\r LINE "Bus snooping circuitry remains ready (check point %03d)"\r MSG 52 14 WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD WORD\r LINE "Rec. D63-D0: %04xh %04xh %04xh %04xh Rec. A31-A0: %04xh %04xh"\r LINE "Exp. D63-D0: %04xh %04xh %04xh %04xh Exp. A31-A0: %04xh %04xh"\r LINE "Rec. DP7-0/DF2-0/WR/AP3-0: %04xh"\r LINE "Exp. DP7-0/DF2-0/WR/AP3-0: %04xh"\r \r /* messages for controller EPROM and RAM test */\r \r MSG 60 1 WORD\r LINE "EPROM checksum error. Calculated sum:%04xh"\r MSG 61 2 WORD WORD\r LINE "Module pvam bit is set in real address mode (check point:%03d)."\r LINE "Module status received:%04xh."\r MSG 62 6 WORD WORD WORD WORD WORD WORD\r LINE "No coincidence between address %04x%04xh and %04x%04xh"\r LINE "in Real Address Mode. Check point %03d. Module status:%04xh."\r MSG 63 5 WORD WORD WORD WORD WORD\r LINE "Data error found at address %04xh (check point %03d)."\r LINE "Data pattern rec.:%04xh, exp.:%04xh. Module status:%04xh"\r MSG 64 6 WORD WORD WORD WORD WORD WORD\r LINE "Coincidence between address %04x%04xh and %04x%04xh in pvam."\r LINE "Received module status:%04xh at check point %03d."\r MSG 65 2 WORD WORD\r LINE "Module pvam bit is not set in protected virtual address mode."\r LINE "Received module status %04xh at check point %03d."\r \r /* generel messages */\r \r MSG 93 5 WORD WORD WORD WORD WORD\r LINE "System bus time out occured while writing to semaphore."\r LINE "System bus address:%04x%04xh. Check point:%03d."\r LINE "Module status:%04xh, Time out reg.:%04xh."\r MSG 94 5 WORD WORD WORD WORD WORD\r LINE "System bus time out occured while reading semaphore."\r LINE "System bus address:%04x%04xh. Check point:%03d."\r LINE "Module status:%04xh, Time out reg.:%04xh."\r MSG 95 5 WORD WORD WORD WORD WORD\r LINE "System bus time out occured while reading syndrome bits register."\r LINE "System bus address:%04x%04xh. Check point:%03d."\r LINE "Module status:%04xh, Time out reg.:%04xh."\r MSG 96 3 WORD WORD WORD\r LINE "System bus time out occured while writing to global address register."\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 97 2 WORD WORD\r LINE "System bus parity error occured at check point:%03d."\r LINE "Time out register contents:%04xh."\r MSG 98 1 WORD\r LINE "System bus parity error nmi failed to occur at check point:%03d."\r MSG 99 2 WORD WORD\r LINE "System bus time out failed to occur while testing local time out."\r LINE "Check point:%03d. Module status:%04xh."\r MSG 100 3 WORD WORD WORD\r LINE "System bus time out occured while writing to module control register."\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 101 3 WORD WORD WORD\r LINE "System bus time out occured while writing to module interrupt fifo."\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 102 3 WORD WORD WORD\r LINE "System bus time out occured while reading module status register."\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 103 3 WORD WORD WORD\r LINE "System bus time out occured while programming module window"\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 104 3 WORD WORD WORD\r LINE "System bus time out occured while writing through module window"\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 105 3 WORD WORD WORD\r LINE "System bus time out occured while reading through module window"\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 106 0\r LINE "Module does not become ready."\r MSG 107 1 WORD\r LINE "Module unknown for this test. Module identity number:%05d."\r MSG 108 3 WORD WORD WORD\r LINE "Wrong module status register contents at check point:%03d."\r LINE "Status register received:%04xh, expected:%04xh."\r MSG 109 3 WORD WORD WORD\r LINE "Wrong module nmi register contents at check point:%03d."\r LINE "NMI register received:%04xh, expected:%04xh."\r MSG 110 3 WORD WORD WORD\r LINE "Wrong module reset register contents at check point:%03d."\r LINE "Reset register received:%04xh, expected:%04xh."\r MSG 111 3 WORD WORD WORD\r LINE "Wrong module information register contents at check point:%03d."\r LINE "Information register received:%04xh, expected:%04xh."\r MSG 112 1 BYTE\r LINE "Module cannot request the bus. Received busmaster: slot %02d."\r MSG 113 1 WORD\r LINE "Illegal module name for this test. Module identity number:%05d."\r \r /* messages for global memory tests and CPU901 local RAM*/\r /* and generel time out messages. */\r \r MSG 200 3 DWORD DWORD DWORD\r LINE "Address %08xh - Read %08xh. Expected %08xh."\r MSG 201 6 WORD WORD WORD BYTE WORD WORD\r LINE "System bus time out occured during write (check point:%03d)."\r LINE "Block start address:%04x%04xh, Module status (slot %02d):%04xh." \r LINE "Time out register contents:%04xh."\r MSG 202 6 WORD WORD WORD BYTE WORD WORD\r LINE "System bus time out occured during read (check point:%03d)."\r LINE "Block start address:%04x%04xh, Module status (slot %02d):%04xh."\r LINE "Time out register contents:%04xh."\r MSG 203 7 WORD WORD WORD WORD WORD WORD WORD\r LINE "Data error found at global memory address %04x%04xh (checkpoint %03d)."\r LINE "data received:%04x%04xh, expected:%04x%04xh."\r MSG 204 8 WORD WORD WORD WORD WORD WORD WORD WORD\r LINE "Uncorrected single bit error in low bank at address:%04x%04xh."\r LINE "Data received:%04x%04xh, expected:%04x%04xh, test pattern:%04x%04xh."\r MSG 206 7 WORD WORD WORD WORD WORD WORD WORD\r LINE "Data error found at global memory address %04x%04xh (checkpoint %03d)."\r LINE "data received:%04x%04xh, expected:%04x%04xh."\r MSG 207 5 WORD WORD WORD WORD WORD\r LINE "System bus time out failed to occur at address %04x%04xh."\r LINE "Global memory address register value:%04xh."\r LINE "Check point:%03d. Module status:%04xh."\r MSG 208 1 WORD\r LINE "Access error NMI (ST1 signal on system bus) failed to occur at check point:%03d"\r MSG 209 2 WORD WORD\r LINE "Wrong single bit error count in low bank. Received:%03d, expected:%03d."\r MSG 210 7 BYTE WORD WORD BYTE BYTE BYTE BYTE\r LINE "Data error is found when check reading from system bus (check point:%03d)."\r LINE "address high:%04xh, address low:%04xh (test byte no:%03d)"\r LINE "rec.:%02xh, exp.:%02xh. Transfer format used:%03d."\r MSG 211 6 WORD WORD BYTE BYTE WORD WORD\r LINE "Data error is found when check reading from system bus."\r LINE "Failure in address high:%04xh low:%04xh, format no.:%03d."\r LINE "Double byte offset:%03d. Rec.:%04xh, exp.:%04xh."\r MSG 212 4 WORD BYTE BYTE BYTE\r LINE "Bad semaphore (no. %05d) on Memory board (slot:%03d). Rec:%01b, exp:%01b."\r MSG 213 8 WORD WORD WORD WORD WORD WORD WORD WORD\r LINE "Uncorrected single bit error in high bank at address:%04x%04xh."\r LINE "Data received:%04x%04xh, expected:%04x%04xh, test pattern:%04x%04xh."\r MSG 214 2 WORD WORD\r LINE "Wrong single bit error count in high bank. Received:%03d, expected:%03d."\r \r /* testadministrator error messages */\r \r MSG 250 0\r LINE "Local test administrator aborted."\r MSG 251 0\r LINE "Local test administrator does not respond."\r \r /* informative messages */\r MSG 252 0\r LINE "SSP based Test running."\r \r /* @(#)TDLU.TXT 1.3 (RC International) 9/14/92 */\r /* @(#)Text for SSP based module tests */\r MODULE dlu901\r /* Transmission interrupt error messages */\r MSG 19 4 BYTE BYTE BYTE BYTE \r LINE "Interrupt(s) missing in multi frames test."\r LINE "Transmit interrupts received:%02d, expected:%02d."\r LINE "Receive interrupts received:%02d, expected:%02d."\r MSG 20 5 BYTE BYTE DWORD WORD WORD\r LINE "Maximum permitted errors (%01d) exceeded on channel A (channel status=%02xh)."\r LINE "Current frame no %10d, CRC errors:%03d, Invalid symbol errors:%03d."\r MSG 21 5 BYTE BYTE DWORD WORD WORD\r LINE "Maximum permitted errors (%01d) exceeded on channel B (channel status=%02xh)."\r LINE "Current frame no %10d, CRC errors:%03d, Invalid symbol errors:%03d."\r MSG 22 4 DWORD BYTE BYTE WORD\r LINE "Bus error interrupt from channel A during transmission of frame no:%10d"\r LINE "Channel status=%02xh, check point:%02d, interrupt word:%04xh."\r MSG 23 4 DWORD BYTE BYTE WORD\r LINE "Bus error interrupt from channel B during transmission of frame no:%10d"\r LINE "Channel status=%02xh, check point:%02d, interrupt word:%04xh."\r MSG 24 4 DWORD BYTE BYTE WORD\r LINE "Error interrupt on channel A during transmission, frame no:%10d"\r LINE "Channel status=%02xh, check point:%02d, interrupt word:%04xh."\r MSG 25 4 DWORD BYTE BYTE WORD\r LINE "Error interrupt on channel B during transmission, frame no:%10d"\r LINE "Channel status=%02xh, check point:%02d, interrupt word:%04xh."\r MSG 26 4 DWORD BYTE BYTE WORD\r LINE "Lack of carrier on media interrupt on channel A."\r LINE "Frame no:%10d, channel status=%02xh."\r LINE "check point:%02d, interrupt word:%04xh."\r MSG 27 4 DWORD BYTE BYTE WORD\r LINE "Lack of carrier on media interrupt on channel B."\r LINE "Frame no:%10d, channel status=%02xh."\r LINE "check point:%02d, interrupt word:%04xh."\r MSG 28 4 DWORD BYTE BYTE WORD\r LINE "Channel A receive fifo overrun during transmission of frameno:%10d."\r LINE "Channel status=%02xh, Check point:%02d, interrupt word:%04xh."\r MSG 29 4 DWORD BYTE BYTE WORD\r LINE "Channel B receive fifo overrun during transmission of frameno:%10d."\r LINE "Channel status=%02xh, Check point:%02d, interrupt word:%04xh."\r MSG 30 4 DWORD BYTE BYTE WORD\r LINE "Wrong number of subframes on channel A."\r LINE "Frame no:%10d, channel status=%02xh."\r LINE "check point:%02d, interrupt word:%04xh."\r MSG 31 4 DWORD BYTE BYTE WORD\r LINE "Wrong number of subframes on channel B."\r LINE "Frame no:%10d, channel status=%02xh."\r LINE "check point:%02d, interrupt word:%04xh."\r MSG 32 4 DWORD BYTE BYTE WORD\r LINE "Send interrupt command read before frame end (lack of subcommands)."\r LINE "Channel A, frame no:%10d, channel status=%02xh."\r LINE "check point:%02d, interrupt word:%04xh."\r MSG 33 4 DWORD BYTE BYTE WORD\r LINE "Send interrupt command read before frame end (lack of subcommands)."\r LINE "Channel B, frame no:%10d, channel status=%02xh."\r LINE "check point:%02d, interrupt word:%04xh."\r MSG 34 2 WORD BYTE\r LINE "Misplaced channel interrupt. Interrupt word:%02xh, check point:%02d."\r MSG 35 2 WORD BYTE\r LINE "Unused channel interrupt received. Interrupt word:%02xh, check point:%02d."\r MSG 36 4 DWORD WORD BYTE BYTE\r LINE "Transmit time out on channel A, frame no:%10d (%05dms)."\r LINE "Channel status=%02xh, check point:%02d."\r MSG 37 4 DWORD WORD BYTE BYTE\r LINE "Transmit time out on channel B, frame no:%10d (%05dms)."\r LINE "Channel status=%02xh, check point:%02d."\r MSG 38 4 DWORD WORD BYTE BYTE\r LINE "Receive time out on channel A, frame no:%10d (%05dms)."\r LINE "Channel status=%02xh, check point:%02d."\r MSG 39 4 DWORD WORD BYTE BYTE\r LINE "Receive time out on channel B, frame no:%10d (%05dms)."\r LINE "Channel status=%02xh, check point:%02d."\r MSG 40 0\r LINE "Too many dlu interrupts to clean up." \r MSG 41 0\r LINE "ICB board missing."\r MSG 42 3 BYTE BYTE BYTE\r LINE "Illegal XON/XOFF indication on channel A."\r LINE "Channel status rec.:%02xh, exp.:%02xh, check point:%02d."\r MSG 43 3 BYTE BYTE BYTE\r LINE "Illegal XON/XOFF indication on channel B."\r LINE "Channel status rec.:%02xh, exp.:%02xh, check point:%02d."\r MSG 44 3 BYTE BYTE BYTE\r LINE "Illegal receive fifo indication on Channel A."\r LINE "Channel status rec.:%02xh, exp.:%02xh, check point:%02d."\r MSG 45 3 BYTE BYTE BYTE\r LINE "Illegal receive fifo indication on Channel B."\r LINE "Channel status rec:%02xh, exp.:%02xh, check point:%02d."\r MSG 46 3 BYTE BYTE BYTE\r LINE "Missing interrupt error code %02xh on channel A (received %02xh)."\r LINE "Check point:%02d."\r MSG 47 3 BYTE BYTE BYTE\r LINE "Missing interrupt error code %02xh on channel B (received %02xh)."\r LINE "Check point:%02d."\r \r /* data and system bus access errors */\r MSG 49 3 DWORD BYTE BYTE\r LINE "Data error found on channel A on address %08xh."\r LINE "Received:%02xh, Expected:%02xh."\r MSG 50 3 DWORD BYTE BYTE\r LINE "Data error found on channel B on address %08xh."\r LINE "Received:%02xh, Expected:%02xh."\r MSG 51 3 DWORD BYTE BYTE\r LINE "System bus time out occurred during access to channel A command fifo "\r LINE "Address:%08xh, channel status:%02xh. Bus master: slot %02d."\r MSG 52 3 DWORD BYTE BYTE\r LINE "System bus time out occurred during access to channel B command fifo "\r LINE "Address:%08xh, channel status:%02xh. Bus master: slot %02d."\r MSG 53 3 DWORD BYTE BYTE\r LINE "System bus time out occurred during access to channel A control register"\r LINE "Address:%08xh, channel status:%02xh. Bus master: slot %02d."\r MSG 54 3 DWORD BYTE BYTE\r LINE "System bus time out occurred during access to channel B control register"\r LINE "Address:%08xh, channel status:%02xh. Bus master: slot %02d."\r MSG 55 2 DWORD BYTE\r LINE "System bus time out occurred during access to channel A status register"\r LINE "Address:%08xh. Bus master: slot %02d."\r MSG 56 2 DWORD BYTE\r LINE "System bus time out occurred during access to channel B status register"\r LINE "Address:%08xh. Bus master: slot %02d."\r MSG 57 3 DWORD BYTE BYTE\r LINE "System bus time out occurred during access to channel A receive fifo"\r LINE "Address:%08xh, channel status:%02xh. Bus master: slot %02d."\r MSG 58 3 DWORD BYTE BYTE\r LINE "System bus time out occurred during access to channel B receive fifo"\r LINE "Address:%08xh, channel status:%02xh. Bus master: slot %02d."\r MSG 59 3 DWORD BYTE BYTE\r LINE "System bus parity error occurred during access to dlu slave interface."\r LINE "Address:%08xh. Bus address- and data master: slot %02d, slot %02d."\r MSG 60 2 BYTE WORD\r LINE "Receive fifo on channel A unexpected full before attempting to write."\r LINE "Channel status:%02xh, check point:%02d."\r MSG 61 2 BYTE WORD\r LINE "Receive fifo on channel A unexpected full before attempting to write."\r LINE "Channel status:%02xh, check point:%02d."\r MSG 62 2 BYTE WORD\r LINE "Receive fifo on channel A unexpected empty before attempting to read."\r LINE "Channel status:%02xh, check point:%02d."\r MSG 63 2 BYTE WORD\r LINE "Receive fifo on channel B unexpected empty before attempting to read."\r LINE "Channel status:%02xh, check point:%02d."\r MSG 64 1 DWORD\r LINE "Missing busy interrupt from dlu slave interface. Address:%08xh."\r MSG 65 3 WORD BYTE BYTE\r LINE "Illegal channel A fifo status at check point:%02d, rec.:%02xh, exp.:%02xh."\r MSG 66 3 WORD BYTE BYTE\r LINE "Illegal channel B fifo status at check point:%02d, rec.:%02xh, exp.:%02xh."\r MSG 67 3 WORD BYTE BYTE \r LINE "Invalid data read from channel A receive fifo (byte %05d). Rec.:%02xh, exp.:%02xh."\r MSG 68 3 WORD BYTE BYTE \r LINE "Invalid data read from channel B receive fifo (byte %05d). Rec.:%02xh, exp.:%02xh."\r MSG 69 2 BYTE BYTE \r LINE "Invalid empty offset read from channel A receive fifo. Rec.:%02xh, exp.:%02xh."\r MSG 70 2 BYTE BYTE \r LINE "Invalid empty offset read from channel B receive fifo. Rec.:%02xh, exp.:%02xh."\r MSG 71 2 BYTE BYTE \r LINE "Invalid full offset read from channel A receive fifo. Rec.:%02xh, exp.:%02xh."\r MSG 72 2 BYTE BYTE \r LINE "Invalid full offset read from channel B receive fifo. Rec.:%02xh, exp.:%02xh."\r MSG 74 4 DWORD BYTE BYTE WORD\r LINE "Misplaced idle symbols on channel A in frame no:%10d."\r LINE "Channel status=%02xh, Check point:%02d, interrupt word:%04xh."\r MSG 75 4 DWORD BYTE BYTE WORD\r LINE "Misplaced idle symbols on channel B in frame no:%10d."\r LINE "Channel status=%02xh, Check point:%02d, interrupt word:%04xh."\r MSG 76 4 DWORD BYTE BYTE WORD\r LINE "Missing subframe start or frame end delimiter on Channel A."\r LINE "Frame no:%10d, Channel status=%02xh, Check point:%02d."\r LINE "Interrupt word:%04xh."\r MSG 77 4 DWORD BYTE BYTE WORD\r LINE "Missing subframe start or frame end delimiter on Channel B."\r LINE "Frame no:%10d, Channel status=%02xh, Check point:%02d."\r LINE "Interrupt word:%04xh."\r MSG 78 4 DWORD BYTE BYTE WORD\r LINE "Missing subframe start delimiter on Channel A in frame no:%10d."\r LINE "Channel status=%02xh, Check point:%02d, interrupt word:%04xh."\r MSG 79 4 DWORD BYTE BYTE WORD\r LINE "Missing subframe start delimiter on Channel B in frame no:%10d."\r LINE "Channel status=%02xh, Check point:%02d, interrupt word:%04xh."\r MSG 80 3 DWORD BYTE BYTE\r LINE "Receive dma on channel A have passed receive area on address %08xh."\r LINE "Received:%02xh, Expected:%02xh."\r MSG 81 3 DWORD BYTE BYTE\r LINE "Receive dma on channel B have passed receive area on address %08xh."\r LINE "Received:%02xh, Expected:%02xh."\r \r /* messages for system access, common with SSP based tests */\r MSG 97 2 WORD WORD\r LINE "System bus parity error occurred at check point:%03d."\r LINE "Time out register contents:%04xh."\r MSG 100 3 WORD WORD WORD\r LINE "System bus time out occurred while writing to module control register."\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 102 3 WORD WORD WORD\r LINE "System bus time out occurred while reading module status register."\r LINE "Check point:%03d. Module status:%04xh, Time out reg.:%04xh."\r MSG 201 6 WORD WORD WORD BYTE WORD WORD\r LINE "System bus time out occurred during write (check point:%03d)."\r LINE "Block start address:%04x%04xh, Module status (slot %02d):%04xh." \r LINE "SSP Time out register contents:%04xh."\r MSG 202 6 WORD WORD WORD BYTE WORD WORD\r LINE "System bus time out occurred during read (check point:%03d)."\r LINE "Block start address:%04x%04xh, Module status (slot %02d):%04xh."\r LINE "SSP Time out register contents:%04xh."\r \r /* informative messages */\r MSG 250 2 DWORD BYTE\r LINE "CRC error detected in frame no:%10d (channel code:%01d)."\r MSG 251 2 DWORD BYTE\r LINE "Invalid symbol error detected in frame no:%10d (channel code:%01d)."\r MSG 252 0\r LINE "Initializing test data."\r MSG 253 0\r LINE "Channel test executing"\r MSG 254 0\r LINE "Checking data"\r