⟦dad2eb268⟧

TextFile

/* @(#)MSG.TXT	1.24 (RC International) 11/12/93 */\r
/* @(#)Text for the messages on the SSP */\r
\r
subsys  PUA  50\r
severe  MSG_PUA_UNEXP    "Unexpected buffer u1=%d, u2=%d, u3=%d, u4=%d"\r
warn    MSG_PUA_WDRST    "Last reset due to watchdog timer"\r
warn    MSG_PUA_CMRST    "Last reset due to external command"\r
warn    MSG_PUA_LPRST    "Last reset due to local parity error"\r
warn    MSG_PUA_PWRST    "Last reset due to power failure"\r
severe  MSG_PUA_FNODK    "No diskette found (%s)"\r
severe  MSG_PUA_FNOFILE  "File %s not found"\r
severe  MSG_PUA_FERR     "File %s error %d in line %d. (%d,%d)"\r
info    MSG_PUA_FSUC     "File %s read ended. (%d,%d)"\r
info    MSG_PUA_FWSUC    "File %s write ended. (%d,%d)"\r
warn    MSG_PUA_CONERR   "Console i/o error"\r
severe  MSG_PUA_MENUERR  "Error from menu system : %d"\r
severe  MSG_PUA_DMERR    "Fatal menu error - menu system aborted"\r
severe  MSG_PUA_STATEERR "Change from %s to %s illegal"\r
info    MSG_PUA_TESTED	 "PU test finished"\r
info    MSG_PUA_LOADED	 "PU load successfully finished"\r
info    MSG_PUA_LOADERR	 "PU load finished due to error"\r
warn    MSG_PUA_ERRH	 "Error handling state entered"\r
info    MSG_PUA_PWD		 "PU is powered down"\r
info    MSG_PUA_PWU		 "PU is powered up (%d)."\r
severe  MSG_PUA_UNAPWU	 "Unable to power PU up"\r
severe  MSG_PUA_NOMEM    "PU has no functional global memory"\r
severe  MSG_PUA_NOIOCS   "PU has no functional IOC modules"\r
severe  MSG_PUA_NODLCS   "PU has no functional DLC or DLU modules"\r
severe  MSG_PUA_NOCPUS   "PU has no functional CPU modules"\r
severe  MSG_PUA_ONEMCPU  "PU has only one functional MIPS CPU module"\r
info    MSG_PUA_OLEFT  	 "Operating state left on OS request"\r
warn    MSG_PUA_RTCACC   "Unable to access real time clock"\r
info    MSG_PUA_RTCSET   "Time set to %d:%02d:%02d. Date set to %d. %s %d"\r
info    MSG_PUA_TZSETE   "Time zone set to %d. Daylight saving set"\r
info    MSG_PUA_TZSETN   "Time zone set to %d. Daylight saving reset"\r
info    MSG_PUA_REBOOT   "Automatically reloading system"\r
info    MSG_PUA_REBWAR   "System will be reloaded in %d seconds"\r
info    MSG_PUA_REBABT   "Automatic reload aborted"\r
info    MSG_PUA_ULEFT    "Operating state left on user request"\r
info    MSG_PUA_NOREBSW  "No reload due to switch setting"\r
info    MSG_PUA_NOREBTIME "No reload due to uptime (up %d min. must be %d min.)"\r
severe  MSG_PUA_ILLCPU   "SSP program and CPU type does not match"\r
warn    MSG_PUA_RTCNSET   "Time NOT set to %03d:%03d:%03d, the %03d. %03d %04d"\r
\r
subsys	MSH  51\r
severe  MSG_MSH_UNEXP     "Unexpected message command %d"\r
info    MSG_MSH_DKSTARTED "Logging on SSP diskette started"\r
warn    MSG_MSH_DKSTRERR  "Unable to open log on SSP diskette. (%d,%d)"\r
info    MSG_MSH_DKENDS    "Logging on SSP diskette ends"\r
warn    MSG_MSH_DKENDERR  "Error when closing SSP diskette log. (%d,%d)"\r
info    MSG_MSH_OSSTARTED "Logging in operating system started"\r
info    MSG_MSH_CPSTARTED "Copy of SSP log to operating system started"\r
info    MSG_MSH_OSENDED   "Logging in operating system ended"\r
warn    MSG_MSH_DKSPACE   "SSP diskette log out of space"\r
warn    MSG_MSH_RTCACC 	  "Unable to access real time clock"\r
warn    MSG_MSH_DKERR     "I/O error on SSP diskette log. (%d)"\r
warn    MSG_MSH_NOPR      "No printer available. (%d)"\r
warn    MSG_MSH_PRNRDY    "Printer not ready. (%d)"\r
warn    MSG_MSH_ILLPR     "Unknown printer status report. (%d)"\r
warn    MSG_MSH_REMOVED   "Diskette removed while logging"\r
warn    MSG_MSH_ABEND     "Logging on diskette abnormally ended"\r
warn    MSG_MSH_OSLOST    "%d messages from operating system lost"\r
\r
subsys  MNH  52\r
\r
subsys  VCI  53\r
severe  MSG_VCI_UNEXP     "Unexpected console command %d"\r
severe  MSG_VCI_OPENERR   "Error when opening console %s (%d, %d)"\r
warn    MSG_VCI_IOERR     "IO error on console %s (%d, %d)"\r
severe  MSG_VCI_CPLERR    "Console %s - no coupling found (%d, %d, %d)"\r
severe  MSG_VCI_PROTERR   "Illegal protocol element for console %s (%d,%d)"\r
severe  MSG_VCI_INKONSIST "Inconsistent data for console %s (%d)"\r
\r
subsys  LS   54\r
severe  MSG_LS_UNEXP  "Unexpected load command %d"\r
severe  MSG_LS_NODK   "No diskette found (File %s)"\r
severe  MSG_LS_NOFILE "File %s not found"\r
severe  MSG_LS_OPERR  "File %s - I/O error %d - during open"\r
severe  MSG_LS_IOERR  "File %s - I/O error %d - during read"\r
severe  MSG_LS_FMTERR "File %s - Format error %d"\r
severe  MSG_LS_ILLMOD "%s (Slot %d) - don't know how to load"\r
severe  MSG_LS_985RUN "%s (Slot %d) - RUN <> 0 when holded"\r
severe  MSG_LS_985FPU "%s (Slot %d) - unable to load FPU"\r
\r
subsys  HM   55\r
severe MSG_HM_UNEXP  "Unexpected healthiness command %d"\r
info   MSG_HM_TPLOG  "%s PU and %s PS temperature indicator(s) above limit"\r
warn   MSG_HM_TPWAR  "%s PU and %s PS temperature indicator(s) above limit"\r
info   MSG_HM_TPOK   "Temperature OK"\r
info   MSG_HM_PSLOG  "Power supply count %d. Power supply %s present"\r
warn   MSG_HM_PSWAR  "Power supply count %d. Power supply %s present"\r
info   MSG_HM_MODLOG "%s (Slot %2d). Module status register : %04xh"\r
warn   MSG_HM_HWWAR  "%s (Slot %2d). Hardware error - code %04xh"\r
warn   MSG_HM_WDWAR  "%s (Slot %2d). PI-4 kernel error - code %04xh in process %04x (%s) at (%04x) %04x:%04x"\r
info   MSG_HM_ECCLOG "%s (Slot %2d). %d corrected errors. (%02xh,%02xh)"\r
warn  MSG_HM_ECCWAR "%s (Slot %2d). Errors corrected %d. (%02xh,%02xh)"\r
warn   MSG_HM_PWWAR  "Power warning interrupt received"\r
warn   MSG_HM_PWFAIL "Power failure on %s (%04xh)"\r
warn   MSG_HM_SBFAIL "%s on system bus (%04xh)"\r
warn   MSG_HM_SBT    "System bus timeout, master %s(slot %d)"\r
warn   MSG_HM_MASTERS "A-master %s(slot %d) d-master %s(slot %d)"\r
info   MSG_HM_SNOOP  "Snoop completed : Slot %d. Address %08Xh (%Xh).   Data %08X %08Xh (%02Xh). Format %Xh. Write %Xh"\r
severe MSG_HM_MANYNMI "Too many non maskable interrupts received (%04Xh,%04Xh)"\r
warn   MSG_HM_MONB    "RC CPU(Slot %d) - monitor break %d (IC=%06Xh)"\r
warn   MSG_HM_SBO    "Observed by %s(slot %d) - code %04Xh"\r
severe MSG_HM_SBLTFAIL "Local timeout when accessing system bus interface"\r
warn   MSG_HM_PI4REG "FL=%04x AX=%04x CX=%04x DX=%04x BX=%04x DS=%04x     SI=%04x ES=%04x DI=%04x SS=%04x SP=%04x BP=%04x"\r
warn   MSG_HM_PI4STK "Stack (%04x:%04x) : %04x %04x %04x %04x %04x %04x   %04x %04x %04x %04x"\r
\r
subsys  OSI  56\r
severe MSG_OSI_UNEXP   "Unexpected OS interface command %d"\r
severe MSG_OSI_CPLERR  "Cannot initialize OS interface coupling %d, %d, %d"\r
warn   MSG_OSI_SMALL   "Buffer too small for OS command. (cmd=%d, size=%d)"\r
warn   MSG_OSI_BIG     "Buffer too big for OS command. (cmd=%d, size=%d)"\r
warn   MSG_OSI_UNKNOWN "Unknown command received from OS. (cmd=%d)"\r
warn   MSG_OSI_UNIMPL  "OS command not implemented. (cmd=%d)"\r
severe MSG_OSI_FATAL   "Unrecoverable protocol error. (%08xh)"\r
warn   MSG_OSI_DUMMY   "Wrong DUMMY buffer received. (%08xh)"\r
warn   MSG_OSI_STOPPED "Wrong STOPPED buffer received. (%08xh)"\r
severe MSG_OSI_PANIC   "%s"\r
warn   MSG_OSI_INTERN  "Internal error (%d)"\r
\r
subsys  RCTI 57\r
severe MSG_RCTI_UNEXP  "Unexpected RC timer command %d"\r
warn   MSG_RCTI_RTCACC "Unable to access real time clock"\r
warn   MSG_RCTI_NOINTR "No clock interrupt given last %d seconds"\r
\r
subsys  RCUT 58\r
severe MSG_RCUT_UNEXP   "Unexpected RC utility command %d"\r
severe MSG_RCUT_CPLERR  "Cannot initialize monitor coupling %d, %d, %d"\r
warn   MSG_RCUT_PROTERR "Illegal protocol element. (code=%d,%06xh)"\r
warn   MSG_RCUT_IOERR   "I/O error (code =%d,%d)"\r
severe MSG_RCUT_FATAL   "Unrecoverable protocol error. (code=%d,%08xh)"\r
info   MSG_RCUT_OS_I    "%s"\r
warn   MSG_RCUT_OS_W    "%s"\r
severe MSG_RCUT_OS_S    "%s"\r
fatal  MSG_RCUT_OS_F    "%s"\r
warn   MSG_RCUT_CMD_OF	"Too many commands received (code=%d)."\r
warn   MSG_RCUT_NORDISK	"Not enough space for ram disk (%d,%d)"\r
info   MSG_RCUT_FLOPLINK "Create link to floppy disk received"\r
info   MSG_RCUT_TERMLINK "Create link to console received"\r
info   MSG_RCUT_RDISKLINK "Create link to ram disk received (%d,%d)"\r
info   MSG_RCUT_RTCLINK  "Create link to real time clock received"\r
\r
subsys  PUTA 59\r
severe MSG_PUTA_UNEXP     "Unexpected test command %d"\r
severe MSG_PUTA_MODE      "Illegal test mode change from %d to %d"\r
warn   MSG_PUTA_MANI      "Manual PU test is idle"\r
info   MSG_PUTA_AUTO      "Automatic PU test started"\r
severe MSG_PUTA_ILLMAN    "Illegal manual command received %d"\r
severe MSG_PUTA_READID    "Slot %2d - %s error in module info. (%d)"\r
severe MSG_PUTA_UNKNOWNID "Slot %2d - Unknown module id %s"\r
warn   MSG_PUTA_CONFID    "Slot %2d - Module id is %s. Cust. id is %s"\r
info   MSG_PUTA_MEMLDS    "Loading %s into global memory"\r
info   MSG_PUTA_MEMLDE    "Global memory load successful"\r
info   MSG_PUTA_MODLDS    "Loading %s into %s (slot %d)"\r
info   MSG_PUTA_MODLDE    "Load of %s (slot %d) successful"\r
info   MSG_PUTA_MODTSTS   "%s TEST %d started on %s (slot %d)"\r
info   MSG_PUTA_MODSCMD   "Test command %s sent to %s (slot %d)"\r
info   MSG_PUTA_MODSTART  "%s (slot %d) local test administrator started"\r
info   MSG_PUTA_MODINTOK  "%s (slot %d) interrupt fifo test successful"\r
warn   MSG_PUTA_MODIDLE   "%s (slot %d) local test administrator idle"\r
severe MSG_PUTA_MODHALT   "%s (slot %d) local test administrator halted"\r
severe MSG_PUTA_MODLERR   "%s (slot %d) local test administrator aborted"\r
info   MSG_PUTA_RMFINI    "All module identifications read"\r
info   MSG_PUTA_CMFINI    "Global memory configured"\r
severe MSG_PUTA_NOCPUL   "No main processor found - cannot load global memory"\r
severe MSG_PUTA_NOCPUT   "No main processor found - cannot test global memory"\r
severe MSG_PUTA_NOMEM    "No global memory found"\r
severe MSG_PUTA_NOMEML   "No global memory found - cannot load CPU"\r
severe MSG_PUTA_TWOCPU    "Both MIPS and RC CPU found in PU"\r
severe MSG_PUTA_ILL_STR   "%s (slot %d) illegal short test report %d"\r
info   MSG_PUTA_LERR0     "%s (slot %d) %s TEST %d successful"\r
warn   MSG_PUTA_LERR1     "%s (slot %d) %s TEST %d no such test"\r
warn   MSG_PUTA_LERR2     "%s (slot %d) %s TEST %d illegal parameters"\r
severe MSG_PUTA_LERR      "%s (slot %d) %s TEST %d - Error %d found"\r
severe MSG_PUTA_ERRP "Parameters %04xh %04xh %04xh %04xh %04xh %04xh %04xh %04xh"\r
warn   MSG_PUTA_MANIG  "Manual test command ignored - not in manual mode"\r
warn   MSG_PUTA_985REG "Cannot load RC CPU registers (code - %d)"\r
info   MSG_PUTA_REMEM  "%s (slot %d) baseaddress set to %08xh"\r
warn   MSG_PUTA_RESET  "%s (slot %d) reset"\r
warn   MSG_PUTA_NOCPU  "Slot %d does not contain a CPU"\r
warn   MSG_PUTA_EXTMEM "Too much memory (%d MHW) - only %d MHW tested"\r
info   MSG_PUTA_SERR0  "%s test successful"\r
warn   MSG_PUTA_SERR1  "SSP test %s - no such test"\r
warn   MSG_PUTA_SERR2  "%s test illegal parameters"\r
severe MSG_PUTA_SERR   "%s test - Error %d found"\r
info   MSG_PUTA_S1ERR0 "%s (slot %d) %s test successful"\r
warn   MSG_PUTA_S1ERR1 "%s (slot %d) SSP based test %s - no such test"\r
warn   MSG_PUTA_S1ERR2 "%s (slot %d) %s test illegal parameters"\r
severe MSG_PUTA_S1ERR  "%s (slot %d) %s test - Error %d found"\r
severe MSG_PUTA_NOANS  "%s (slot %d) local test administrator does not respond"\r
warn   MSG_PUTA_SBRES  "The system bus is reset"\r
severe MSG_PUTA_CUST  	"Illegal customization values of %s (slot %d)"\r
info   MSG_PUTA_LERR3    "%s (slot %d) %s TEST %d info mess %d rec."\r
info   MSG_PUTA_SSPTSTS "%s (slot %d) %s test started"\r
info   MSG_PUTA_SSPSEQ "ssp based %s TEST %d started on %s (slot %d)"\r
severe MSG_PUTA_S1ERR3  "%s (slot %d) %s test info mess %d rec."\r
warn   MSG_PUTA_MCPU   "Too many CPU's - CPU in slot %d cannot be tested"\r
\r
subsys  TCI  60\r
severe MSG_TCI_UNEXP  "Unexpected test communication command %d"\r
warn   MSG_TCI_OFLOW  "Overflow in test communication"\r
warn   MSG_TCI_ILLINT "Illegal system bus interrupt fifo format (%04xh,%d)"\r
warn   MSG_TCI_WSLOT  "Slot %2d. Unexpected test communication (%04xh)"\r
warn   MSG_TCI_UACK   "Slot %2d. Unexpected acknowledge (%02xh, state %d,%d)"\r
warn   MSG_TCI_UREP   "Slot %2d. Unexpected test report (%02xh, state %d,%d)"\r
warn   MSG_TCI_UMWOR "Slot %2d. Unexpected message word (%02xh, state %d,%d)"\r
warn   MSG_TCI_SNOTRDY "Slot %2d. Slave not ready (%02xh, state %d,%d)"\r
warn   MSG_TCI_WACK   "Slot %2d. Wrong acknowledge (rec. %04xh, exp. %04xh)"\r
warn   MSG_TCI_DLUINT "Unexpected dlu interrupt received (%04xh,%d)"\r
\r
subsys  PULA 61\r
severe MSG_PULA_UNEXP   "Unexpected load command %d"\r
severe MSG_PULA_MODE    "Illegal load mode change from %d to %d"\r
info   MSG_PULA_AUTO    "Automatic PU load started"\r
warn   MSG_PULA_MANI    "Manual PU load is idle"\r
warn   MSG_PULA_ILLMAN  "Illegal manual load command received - %d"\r
severe MSG_PULA_NOVCI   "No virtual console available for slot %d"\r
info   MSG_PULA_MEMLDS  "Loading %s into global memory"\r
info   MSG_PULA_MEMLDE  "Global memory load successful"\r
info   MSG_PULA_MODLDS  "Loading %s into %s (slot %d)"\r
info   MSG_PULA_MODLDE  "Load of %s (slot %d) successful"\r
severe MSG_PULA_NOCPUL  "No main processor found - cannot load global memory"\r
info   MSG_PULA_CMFINI  "Global memory configured"\r
info   MSG_PULA_IMFINI  "Global memory initialized"\r
warn   MSG_PULA_IMERR   "Global memory already initialized - command ignored"\r
info   MSG_PULA_SERVS   "SSP services started"\r
warn   MSG_PULA_SERVERR "SSP services already started - command ignored"\r
info   MSG_PULA_CNTLS   "Controllers started"\r
info   MSG_PULA_CPUS    "Main processor(s) started"\r
severe MSG_PULA_NOTRDY  "%s (slot %d) does not become ready"\r
severe MSG_PULA_SSPCERR "Cannot initialize SSP couplings"\r
severe MSG_PULA_CARERR  "%s (slot %d) has %d couplings - only %d allowed"\r
severe MSG_PULA_CARFND  "%s (slot %d) cannot find coupling tables"\r
severe MSG_PULA_CONFFND "%s (slot %d) cannot find customization area"\r
warn   MSG_PULA_MANIG   "Manual load command ignored - not in manual mode"\r
severe MSG_PULA_CPULERR "Error %d found when initializing CPU in slot %d"\r
warn   MSG_PULA_NOBOOT  "No functional BOOT IOC"\r
warn   MSG_PULA_NOTCNF  "No customization data found for %s (slot %d)"\r
warn   MSG_PULA_EXTMEM  "Too much memory (%d MHW) - only %d MHW used"\r
severe MSG_PULA_NOPUNO  "Logical PU number not set"\r
severe MSG_PULA_CUST  	"Illegal customization values of %s (slot %d)"\r
warn   MSG_PULA_EXTMEM1  "Too much memory (%d Mbytes) - only %d Mbytes used"\r
warn   MSG_PULA_MONMEM  "%d KHW of memory used by monitor - %d KHW customized"\r
\r
subsys  LTA 84 \r
severe MSG_LTA_ILLCMD  "Slot %2d. Unexpected test command (%1d,%04xh)"\r
warn   MSG_LTA_ILLTST "Slot %2d. Illegal test choise:%s, test(type,no):%02d,%02d"\r
DataMuseum.dk

RC4000/8000/9000

⟦dad2eb268⟧ TextFile

Derivation

TextFile
