|
DataMuseum.dkPresents historical artifacts from the history of: IBM System/36 |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about IBM System/36 Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - download
Length: 37120 (0x9100)
Notes: FORM36, MEMBER_O
Names: »##FST9 «
└─⟦edfbb8ae1⟧ Bits:30009818 AS/ENTRY - S/36 SYST SUPP PROG IDENT. S/36 PTFDK3900 FC 1991/9074/9084 Refer to Memo 36714 Product Number 5727SS6 Rel 05 3 Created 19950301 Level 01 Seq 001 of 011
└─⟦8738fec01⟧
└─⟦this⟧ ».##FST9 «
FormPointer36 {name=»S2111 «, f1=0x00, start=0x0004, length=0x03, f5=0x00, f6=0x00, f7=0x05, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Data Communications Line Test Using SDLC Format │
03│ │
04│ │
05│ Line number . . . . . . . . . . . . . . . . . . . . . . . 1-8 ␣┴┤ │
06│ │
07│ Requester or responder . . . . . . . . . . . . . . . . REQ,RES ␣␣␣┴┤ │
08│ │
09│ Review or change the line configuration? . . . . . . . . . Y,N ␣┴┤ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2112 «, f1=0x00, start=0x0007, length=0x02, f5=0x00, f6=0x00, f7=0x04, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Data Communications Line Test Using SDLC Format │
03│ │
04│ │
05│ Requester or responder . . . . . . . . . . . . . . . . REQ,RES ␣␣␣┴┤ │
06│ │
07│ Review or change the line configuration? . . . . . . . . . Y,N ␣┴┤ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2113 «, f1=0x00, start=0x0009, length=0x05, f5=0x00, f6=0x00, f7=0x09, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Review or Change the Line Configuration For This Session │
03│ │
04│ │
05│ Multipoint or switched or nonswitched point-to-point . . M,S,N ␣┴┤ │
06│ │
07│ Answer tone (world trade only) . . . . . . . . . . . . . . Y,N ␣┴┤ │
08│ │
09│ Switched network backup . . . . . . . . . . . . . . . . . Y,N ␣┴┤ │
10│ │
11│ Clock provided by modem or internal clock feature . . . . M,I ␣┴┤ │
12│ │
13│ Half rate or full rate . . . . . . . . . . . . . . . . . . H,F ␣┴┤ │
14│ │
15│ Continuous carrier . . . . . . . . . . . . . . . . . . . . Y,N ␣┴┤ │
16│ │
17│ NRZI . . . . . . . . . . . . . . . . . . . . . . . . . . . Y,N ␣┴┤ │
18│ │
19│ Idle time-out value in half seconds (requester only) . . 1-16 ␣␣┴┤ │
20│ │
21│ │
22│ │
23│ Cmd3-Previous display Cmd7-End │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2114 «, f1=0x00, start=0x000e, length=0x02, f5=0x00, f6=0x00, f7=0x02, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Station Address Entry │
03│ │
04│ │
05│ Enter the remote station address in hexadecimal . . . . . . . ␣␣┴┤ │
06│ │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd3-Previous display Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2115 «, f1=0x00, start=0x0010, length=0x02, f5=0x00, f6=0x00, f7=0x02, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Station Address Entry │
03│ │
04│ │
05│ Enter the address of this station in hexadecimal . . . . . . . ␣␣┴┤ │
06│ │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd3-Previous display Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2121 «, f1=0x00, start=0x0012, length=0x05, f5=0x00, f6=0x00, f7=0x01, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Requester Data Selection │
03│ │
04│ │
05│ Select one of the following: │
06│ │
07│ 1. 256 bytes, 0 through 255 │
08│ 2. 36 characters, A through Z and 0 through 9 │
09│ 3. 40 hexadecimal bytes of 'AA' and 40 hexadecimal bytes of '55' │
10│ 4. 256 hexadecimal bytes of '00' │
11│ 5. 256 hexadecimal bytes of 'FF' │
12│ 6. No data, test command control byte (F3) only │
13│ 7. All 256 combinations (data, data length and control byte may be changed) │
14│ 8. Transmit only (data, data length and control byte may be changed) │
15│ │
16│ │
17│ Enter number - - -␣┴┤ │
18│ │
19│ │
20│ │
21│ │
22│ Cmd3-Return to test selection Cmd7-End │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2122A «, f1=0x00, start=0x0017, length=0x03, f5=0x00, f6=0x00, f7=0x05, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Data Entry │
03│ │
04│ Length of data to be included in this frame . . . . . . 0-256 ␣␣␣┴┤ │
05│ │
06│ You may change the test command control byte. Enter any │
07│ changes in hexadecimal . . . . . . . . . . . . . . . . . . . . ␣␣┴┤ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ Cmd3-Return to message selection Cmd7-End │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2122B «, f1=0x00, start=0x001a, length=0x07, f5=0x00, f6=0x02, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Data Entry │
03│ │
04│ Length of data to be included in this frame . . . . . . 0-256 ╳␣␣␣╳ │
05│ │
06│ You may change the test command control byte. Enter any │
07│ changes in hexadecimal . . . . . . . . . . . . . . . . . . . . ╳␣␣╳ │
08│ │
09│ │
10│ You may change the data. 'X' characters denote field data bytes that will │
11│ not be transmitted because the data length selected prohibits their use. │
12│ Enter any changes in hexadecimal: │
13│ │
14│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
15│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
16│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
17│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
18│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
19│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
20│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
21│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
22│ │
23│ Cmd3-Return to message selection Cmd7-End │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2123 «, f1=0x00, start=0x0021, length=0x03, f5=0x00, f6=0x00, f7=0x03, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Transmit Count Entry │
03│ │
04│ │
05│ The message selected is - - - - - - - - - - - - - - - - - - - ␣ │
06│ │
07│ Continuously transmit or transmit/receive │
08│ the message? . . . . . . . . . . . . . . . . . . . . . . . Y,N ␣┴┤ │
09│ │
10│ If NO was selected, number of times the message is to be │
11│ transmitted . . . . . . . . . . . . . . . . . . . . . . 1-99 ␣␣┴┤ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd3-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2124 «, f1=0x00, start=0x0024, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Switched Line │
03│ │
04│ │
05│ This line is switched. Perform the following steps: │
06│ 1. Establish the data link. │
07│ 2. Press the Enter key. │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd3-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2125 «, f1=0x00, start=0x0027, length=0x04, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Switched Line │
03│ │
04│ │
05│ This line is switched. Perform the following steps: │
06│ 1. Establish the data link. │
07│ 2. Press the Enter key. DTR will become active. │
08│ 3. Replace the telephone receiver. │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd3-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2126 «, f1=0x00, start=0x002b, length=0x05, f5=0x00, f6=0x00, f7=0x1c, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Autocall Telephone Number Entry │
03│ │
04│ │
05│ To automatically dial, perform the following steps: │
06│ 1. Enter only the necessary digits, SEP or EON characters. │
07│ Use a ' character to represent a SEP character. │
08│ Use a * character to represent an EON character. │
09│ Enter the digits and/or characters . . . . . . . . . . . │
10│ . . . . . . . . . . . . . . . . . . ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
11│ 2. Press the Enter key. │
12│ │
13│ To dial by hand, perform the following steps: │
14│ 1. Dial by hand. │
15│ 2. Press the Enter key. │
16│ │
17│ │
18│ Cmd3-Return to message selection Cmd7-End Help-More information │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2126H «, f1=0x00, start=0x0030, length=0x07, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Help For Autocall Telephone Number Entry │
03│ │
04│ │
05│ SEP character use: │
06│ - A SEP character is inserted in a telephone number to separate digits dialed│
07│ to different telephone exchanges. │
08│ - If the SEP trap is not configured, a SEP character causes the autocall unit│
09│ to stop dialing digits until the next telephone exchange signals ready by │
10│ sending a second dial tone. │
11│ - If the SEP trap is configured, a SEP character will cause a 3-second pause │
12│ before the next digit is dialed. │
13│ │
14│ EON character use: │
15│ - An EON character is used with an autocall unit that cannot recognize an │
16│ answer tone signal. │
17│ - An EON character is placed at the end of a telephone number to indicate to │
18│ the autocall unit that all digits have been dialed. │
19│ - If the EON trap is configured the EON will not be used. │
20│ │
21│ │
22│ Enter-Exit help text Cmd7-End │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2127 «, f1=0x00, start=0x0037, length=0x03, f5=0x00, f6=0x00, f7=0x18, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Call Number Entry │
03│ │
04│ │
05│ X.21 call number . . . . . . . . . . . . . . . ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣┴┤ │
06│ │
07│ ╳Valid characters are: 0 1 2 3 4 5 6 7 8 9 . - , / * ╳ │
08│ │
09│ │
10│ ╳ If this line is direct call line then do not key in any numbers and ╳ │
11│ ╳ press Enter key ╳ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd3-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2128 «, f1=0x00, start=0x003a, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Requester is Active │
03│ │
04│ │
05│ Message selected is - - - - - - - - - - - - - - - - - - - - - ␣ │
06│ │
07│ Transmit count selected is - - - - - - - - - - - - - - - - - - ␣␣ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Cmd7-End Cmd19-Cancel requester operation │
18│ (May need 33 seconds for Cmd7 or Cmd19 command to complete.) │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2129 «, f1=0x00, start=0x003d, length=0x02, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ ╳ Requester Operation Ended With no Errors ╳ │
03│ │
04│ │
05│ Message selected was - - - - - - - - - - - - - - - - - - - - - ␣ │
06│ │
07│ Transmit count selected was - - - - - - - - - - - - - - - - - ␣␣ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2131 «, f1=0x00, start=0x003f, length=0x05, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Responder is Active │
03│ │
04│ Error and response counts will be updated every 7 seconds. │
05│ │
06│ │
07│ Number of responses with no errors - - - - - - - - - - - - - - ␣␣␣ │
08│ Number of responses with errors - - - - - - - - - - - - - - - ␣␣␣ │
09│ │
10│ Errors detected: │
11│ Transmit adapter checks - - - - - - - - - - - - - - - - - - - ␣␣␣ │
12│ Receive adapter checks - - - - - - - - - - - - - - - - - - - ␣␣␣ │
13│ Receive data checks - - - - - - - - - - - - - - - - - - - - - ␣␣␣ │
14│ Invalid frames received - - - - - - - - - - - - - - - - - - - ␣␣␣ │
15│ Receive buffer overruns - - - - - - - - - - - - - - - - - - - ␣␣␣ │
16│ │
17│ Cmd7-End Cmd19-Cancel responder operation │
18│ (May need 33 seconds for Cmd7 or Cmd19 command to complete.) │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2211 «, f1=0x00, start=0x0044, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Line Selected is in Use │
03│ │
04│ │
05│ Another program is using this line. The other program must release the line │
06│ before the online test can use the line. │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to test selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2212 «, f1=0x00, start=0x0047, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Selected Line Not Configured │
03│ │
04│ │
05│ The communications line selected is not configured. │
06│ │
07│ The line must be configured before the online test can use it. │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to test selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2212SD «, f1=0x00, start=0x004a, length=0x02, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ SDLC line is not configured on this system. │
03│ │
04│ SDLC line must be configured before the online test can be run. │
05│ │
06│ │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to end test Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2213 «, f1=0x00, start=0x004c, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Selection Error │
03│ │
04│ │
05│ This test does not support the configuration of the line selected. │
06│ │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to test selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2311 «, f1=0x00, start=0x004f, length=0x04, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Error Detected │
03│ │
04│ A NO DSR error has occurred. One of the following is the probable cause: │
05│ - DSR was not active. │
06│ - The remote device disconnected the data link. │
07│ - No transmit clock. │
08│ - CTS did not become active. │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to test selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2321 «, f1=0x00, start=0x0053, length=0x04, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Error Detected │
03│ │
04│ A nonproductive receive time-out error occurred. │
05│ │
06│ The requester has not received a test message in 16 seconds. One of the │
07│ following is the probable cause: │
08│ - The receive line is not in an idle condition. │
09│ - The receive line quality is poor, preventing detection of an idle │
10│ condition. │
11│ - The responder did not end a frame. │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2322 «, f1=0x00, start=0x0057, length=0x05, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Error Detected │
03│ │
04│ An idle condition has occurred. │
05│ │
06│ No test message was received by the requester after transmitting the test │
07│ message to the responder. The test attempted the transmission of the test │
08│ message three times. One of the following is the probable cause: │
09│ - Incorrect station address. │
10│ - No frame was received or the frame was not complete. │
11│ - The responder operation has stopped. │
12│ - The data link has been interrupted. │
13│ - The CTS delay is too long. │
14│ │
15│ │
16│ │
17│ Enter-Return to message selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2323 «, f1=0x00, start=0x005c, length=0x07, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Message Error │
03│ │
04│ The message received was not the message transmitted. Data received is │
05│ displayed in reverse image. Data transmitted is not reverse imaged. │
06│ │
07│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
08│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
09│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
10│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
11│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
12│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
13│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
14│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
15│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
16│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
17│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
18│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
19│ ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
20│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
21│ │
22│ │
23│ Enter-Return to message selection Cmd7-End │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2411 «, f1=0x00, start=0x0063, length=0x04, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A call progress signal error occurred. │
05│ │
06│ │
07│ The network canceled the data link by sending a negative call progress signal.│
08│ │
09│ The call progress signal │
10│ was - - - - - - - - - - - - - ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
11│ │
12│ Perform the correction that is suitable for the call progress signal. │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2412 «, f1=0x00, start=0x0067, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A T1 time-out error occurred. │
05│ │
06│ │
07│ The network did not respond to the call request. │
08│ │
09│ Attempt the dial-up again. │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2413 «, f1=0x00, start=0x006a, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A T2 time-out error occurred. │
05│ │
06│ │
07│ The network did not respond to the selection signal. │
08│ │
09│ Attempt the dial-up again. │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2414 «, f1=0x00, start=0x006d, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A T3A time-out error occurred. │
05│ │
06│ │
07│ The network responded to the selection signal with information provided by │
08│ the DCE, but did not signal ready for data. │
09│ │
10│ Attempt the dial-up again. │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2415 «, f1=0x00, start=0x0070, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST │
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A T3B time-out error occurred. │
05│ │
06│ │
07│ The network responded with a group 0 call progress signal, but did not signal │
08│ ready for data. │
09│ │
10│ The call progress signal │
11│ was - - - - - - - - - - - - - ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2416 «, f1=0x00, start=0x0073, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A parity error occurred. │
05│ │
06│ │
07│ The attempt to establish a data link failed because a parity error was │
08│ detected on an incoming character. │
09│ │
10│ Attempt the dial-up again. │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2417 «, f1=0x00, start=0x0076, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A DCE clear error occurred. │
05│ │
06│ │
07│ The network canceled the dial-up by performing a DCE clear. │
08│ │
09│ Attempt the dial-up again. │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2418 «, f1=0x00, start=0x0079, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ A DCE not ready error occurred. │
05│ │
06│ │
07│ The data link was not established because the DCE was not ready. │
08│ │
09│ Ensure that the DCE is powered up and connected to the system before │
10│ attempting the dial-up again. │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2419 «, f1=0x00, start=0x007c, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ X.21 Dial-up Error │
03│ │
04│ An adapter check error occurred. │
05│ │
06│ │
07│ An underrun or overrun occurred while the dial-up was in progress. │
08│ │
09│ Attempt the dial-up again. │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to call-number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2324 «, f1=0x00, start=0x007f, length=0x05, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Temporary Errors Detected │
03│ │
04│ │
05│ Message selected - - - - - - - - - - - - - - - - - - - - - - - ␣ │
06│ │
07│ Transmit count selected - - - - - - - - - - - - - - - - - - - ␣␣ │
08│ │
09│ Number of responses received with no errors - - - - - - - - - ␣␣␣ │
10│ │
11│ Errors detected: │
12│ Transmit adapter checks - - - - - - - - - - - - - - - - - - - ␣␣␣ │
13│ Idle condition detected - - - - - - - - - - - - - - - - - - - ␣␣␣ │
14│ Receive adapter checks - - - - - - - - - - - - - - - - - - - ␣␣␣ │
15│ Receive data checks - - - - - - - - - - - - - - - - - - - - - ␣␣␣ │
16│ Invalid frames received - - - - - - - - - - - - - - - - - - - ␣␣␣ │
17│ Receive buffer overruns - - - - - - - - - - - - - - - - - - - ␣␣␣ │
18│ │
19│ │
20│ Enter-Continue Cmd7-End Cmd19-Cancel requester operation │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2511 «, f1=0x00, start=0x0084, length=0x03, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Autocall Error │
03│ │
04│ An error occurred while automatically dialing. │
05│ │
06│ │
07│ The error was a ␣␣␣ error and was ␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to telephone number entry Cmd3-Return to message selection │
18│ Cmd7-End │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2214 «, f1=0x00, start=0x0087, length=0x02, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ Not enough Communication controller storage. │
03│ │
04│ │
05│ An X.21 switched line requires a minimum of 32K words of Communication │
06│ controller storage. │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ Enter-Return to test selection Cmd7-End │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»SLOTMSG «, f1=0x00, start=0x0089, length=0x02, f5=0x00, f6=0x00, f7=0x05, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ ╳ SDLCTEST ╳ │
01│ │
02│ ╳ SDLC online test ╳ │
03│ │
04│ │
05│ ╳Location of DIAG23 or DIAG43 or DSKT03 or DSKT11 or DSKT61 │
06│ diskette . . . . . . . . . . . . . . . S1,S2,S3,M1.nn,M2.nn S1 ┴┤ │
07│ │
08│ │
09│ │
10│ │
11│ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S2126C «, f1=0x00, start=0x008b, length=0x01, f5=0x00, f6=0x00, f7=0x00, f8=0x00, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ SDLC ONLINE TEST ␣␣│
01│ │
02│ │
03│ │
04│ │
05│ │
06│ │
07│ │
08│ │
09│ │
10│ │
11│ ╳ The dial-up is proceeding. ╳ │
12│ │
13│ │
14│ │
15│ │
16│ │
17│ │
18│ │
19│ │
20│ │
21│ │
22│ │
23│ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘
FormPointer36 {name=»S0000 «, f1=0x00, start=0x008c, length=0x05, f5=0x00, f6=0x00, f7=0x00, f8=0x80, f9=0000000000000000}
┌────────────────────────────────────────────────────────────────────────────────┐
00│ │
01│ │
02│ │
03│ │
04│ │
05│ │
06│ │
07│ │
08│ │
09│ │
10│ │
11│ │
12│╳╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
13│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
14│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
15│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
16│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
17│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
18│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
19│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
20│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
21│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
22│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
23│ ╳␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣␣╳ │
24│ │
25│ │
26│ │
27│ │
└────────────────────────────────────────────────────────────────────────────────┘