|
DataMuseum.dkPresents historical artifacts from the history of: Rational R1000/400 DFS Tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about Rational R1000/400 DFS Tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 1562 (0x61a)
Types: ERRMESS, TextFile
Names: »IOA_PANICS.ERRMESS«
└─⟦24d56d853⟧ Bits:30000744 8mm tape, Rational 1000, DFS, D_12_6_5 SEQ293
└─ ⟦this⟧ »IOA_PANICS.ERRMESS«
└─⟦9031b0687⟧ Bits:30000407 8mm tape, Rational 1000, DFS, D_12_7_3
└─ ⟦this⟧ »IOA_PANICS.ERRMESS«
9999 These codes appear in VMACHINE.PAS and in KERNEL_DEFS as BOOT_REASON.xxx. 9999 The messages beginning with "--" are obsolete M100 messages. 00 AC power failure occured 01 DC power failure occured when AC power was OK or White Button Reset 02 --Cluster Manager interrupted by a source which had been masked out 03 --UNIBUS AC power failure 04 --UNIBUS DC power failure 05 --Cluster Manager received an interrupt from an unknown source 06 --Cluster Manager received an illegal interrupt (Timer/Counter 1) 07 Over temperature condition ignored too long 08 Operator console BREAK key 09 Illegal modem output request received 10 Attempt to start modem output with output in progress 11 --Cluster Manager stack corrupt in idle loop. 12 R1000 Halt or Machine Check detected 13 I/O Processor fault 14 --IOA SYSBUS buffer parity error 15 I/O Processor software crash 16 --SYSBUS error ignored too long 17 --Received address frame, expected data frame. Protocol error. 18 --I/O adaptor AC power failure. 19 --IOP made spare IPC request 20 Modem input overrun detected 21 --An I/O device will not release DC_LOW on the UNIBUS 22 --The I/O adaptor cannot get NPG on the UNIBUS 23 --An I/O device will not release NPG or SSYN on the UNIBUS 24 --I/O Processor will not respond to AC_LOW on the UNIBUS 25 Operator initiated EPO 26 --The I/O processor has made an oboslete IPC request 27 --UNIBUS interrupt timeout 28 --UNIBUS I/O timeout 29 --Nested SYSBUS interface error 30 Temperature returned to acceptable limit. 31 Operator console BREAK key (to boot options menu)